August 2018 - Users - oVirt List Archives

[ANN] oVirt 4.2.6 Third Release Candidate is now available
by Sandro Bonazzola 28 Aug '18

28 Aug '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.6 third Release Candidate, as of August 28th, 2018. This update is a release candidate of the sixth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] - oVirt Windows Guest Tools is available [2] Additional Resources: * Read more about the oVirt 4.2.6 release highlights: http://www.ovirt.org/release/4.2.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.6/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

1 0

VDO + HCI = failed reboots
by Donny Davis 28 Aug '18

28 Aug '18

I just spun up the latest and greatest ovirt has to offer, and I am building out an HCI cluster. The deployment went wonderfully. I had dns setup for everything, and it just worked. Great job team! I just wanted to add in something i noticed after rebooting the nodes. The gluster service, and volumes would not come back up after rebooting. I found that there needs to be an entry in the fstab for the gluster logical volumes to tell them to start the vdo service. So without this, the node will fail to boot if you are using vdo. inode64,noatime,nodiratime,discard,x-systemd.requires=vdo.service the defaults are this inode64,noatime,nodiratime Hopefully it helps someone else :) Cheers

2 4

hosted-engine --deploy erorr
by mustafa.taha.mu95＠gmail.com 28 Aug '18

28 Aug '18

hi , i am a new user of ovirt , i want to setup self host , i follow the step in https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_… , after i configure storage this error appear fatal: [localhost]: FAILED! => {"changed": false, "msg": "Engine VM is not running, please check vdsm logs"} how can i fixed it ?

1 0

Migrating to HCI
by Vincent Royer 28 Aug '18

28 Aug '18

I have 2 hosts using NFS storage I want to migrate to HCI and add a third host. Have added the 10Gbe cards and drives to the 3 target hosts and setup a separate physical network for storage. Can I: - deploy a single-node HCI to host 3 - export the VMs to an NFS export domain - Import the VMs to the HCI node - wipe the first 2 hosts and re-deploy them to the HCI DC Is there a guide for this? or should I just export the VMs, blow away all the nodes, and deploy as a 3-node HCI using the wizards? I'm hoping to minimize downtime of the VMs to under one day. *Vince*

2 1

One Windows VM is not responding
by Jonathan Baecker 27 Aug '18

27 Aug '18

Hello Everybody! We have here 13 VMs running under ovirt 4.2.4. Two of them are Windows Server 2016. On one runs a AD, DNS and one application. On the second one runs an SQL Server and also an application. This second one have the problem, that periodical it goes in a state where I get in ovirt the message: *not responding * Beside this the VM is running normal. I can connect it over Remote Desktop. But I can not connect it with ovirt/noVNC, the button is gray out. In a weekly cycle it runs a backup script, maybe this brings some problems, but I really don't know how to debug this. It can be that the VM runs for 3 weeks normal, and then it goes in this state, so I can not really say when this is happen. Also the fact that the other Windows Server VM runs normal, wonders me. Do you have experienced this problem, or do you know how I found out the issue? Best Regards! Jonathan

2 2

Re: External ceph storage
by Luca 'remix_tj' Lorenzetto 27 Aug '18

27 Aug '18

No, The only way you have is to configure cinder to manage ceph pool or in alternative you have to deploy an iscsi gateway, no other ways are available at the moment. So you can't use rbd directly. Luca Il dom 27 mag 2018, 16:54 Leo David <leoalex(a)gmail.com> ha scritto: > Thank you Luca, > At the moment i would try the cinder storage provider, since we already > have a proxmox cluster directly connecting to ceph. The problem is that I > just could not find a straight way to do this. > ie: Specify the ceph monitors and ceph pool to connect to. Can oVirt > directly connect to ceph monitors ? How the configuration should be done if > so ? > Thank you very much ! > > > On Sun, May 27, 2018, 17:20 Luca 'remix_tj' Lorenzetto < > lorenzetto.luca(a)gmail.com> wrote: > >> Hello, >> >> Yes, using cinder or through iscsi gateway. >> >> For a simpler setup i suggest the second option. >> >> Luca >> >> Il dom 27 mag 2018, 16:08 Leo David <leoalex(a)gmail.com> ha scritto: >> >>> Hello everyone, >>> I am new to ovirt and very impressed of its features. I would like to >>> levereage on our existing ceph cluster to provide rbd images for vm hdds, >>> is this possible to achieve ? >>> Thank you very much ! >>> Regards, >>> Leo >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> >>

3 3

Unknown CPU model Broadwell-IBRS-SSBD
by me＠brendanh.com 24 Aug '18

24 Aug '18

Hi, I've just installed hosted-engine. It proceeds to near the end of the Ansible script, then pauses at: "TASK [Check engine VM health]" then eventually errors: "Engine VM is not running, please check vdsm logs. The VDSM logs have error: "libvirtError: internal error: Unknown CPU model Broadwell-IBRS-SSBD" Also, in the oVirt Node webui, the HostedEngine VM is created, but not started. If I press Run, the following error is shown: VM START action failed error: Failed to start domain HostedEngine error: internal error: Unknown CPU model Broadwell-IBRS-SSBD I notice a Trello card was created to add similar Skylake & EPYC CPUs, but not Broadwell: https://trello.com/c/5nGTgQ9P/89-new-ibrs-and-ssbd-cpu-types# Does the Broadwell-IBRS-SSBD CPU need to be added to this supported types list? Many thanks.

3 4

Re: losing ib0 connection after activating host
by Douglas Duckworth 24 Aug '18

24 Aug '18

Sorry, I mean "migration network" for moving live migration traffic. FDR infiniband much faster than 1Gb network which currently acts as migration network, vm network, display network, mgmt network, etc. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine 1300 York - LC-502 E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Fri, Aug 24, 2018 at 9:36 AM, Dominik Holler <dholler(a)redhat.com> wrote: > On Thu, 23 Aug 2018 13:51:39 -0400 > Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > > THANKS! > > > > ib0 now up with NFS storage back on this hypervisor > > > > Thanks for letting us know. > > > Though how do I make it a transfer network? I don't see an option. > > > > I do not understand the meaning of "transfer network". > The network interface to use for NFS results from the routing tables of > the host. > In "Compute > Clusters > Clustername > Logical Networks > Manage > Networks" network roles for some kind of loads can be assigned, but not > for NFS access. > > > > Thanks, > > > > Douglas Duckworth, MSc, LFCS > > HPC System Administrator > > Scientific Computing Unit > > Weill Cornell Medicine > > 1300 York - LC-502 > > E: doug(a)med.cornell.edu > > O: 212-746-6305 > > F: 212-746-8690 > > > > > > On Thu, Aug 23, 2018 at 11:12 AM, Douglas Duckworth > > <dod2014(a)med.cornell.edu > > > wrote: > > > > > Hi Dominik > > > > > > Yes, the network-script was created by our Ansible role that deploys > > > CentOS hosts. It pulls the IP from DNS then templates the script > > > and copies to host. > > > > > > I will try this oVirt step then see if it works! > > > > > > Thanks, > > > > > > Douglas Duckworth, MSc, LFCS > > > HPC System Administrator > > > Scientific Computing Unit > > > Weill Cornell Medicine > > > 1300 York - LC-502 > > > E: doug(a)med.cornell.edu > > > O: 212-746-6305 > > > F: 212-746-8690 > > > > > > > > > On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler > > > <dholler(a)redhat.com> wrote: > > > > > >> Is ifcfg-ib0 created before adding the host? > > >> Can ib0 be reconfigured using engine, e.g. by > > >> "Compute > Hosts > hostx > Network Interfaces > Setup Host > > >> Networks"? If this some kind of self-hosted engine? > > >> > > >> On Thu, 23 Aug 2018 09:30:59 -0400 > > >> Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > >> > > >> > Here's a link to the files: > > >> > > > >> > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_ > > >> 2wjZ6Vo&d=DwICAg&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu > > >> 2s&r=2Fzhh_78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw&m=Y25- > > >> OOvgu58jlC82-fzBeNIpQ7ZscoHznffUhqE6EBM&s=QQXlC9Tisa60TvimyS > > >> 3BnFDCaDF7VPD8eCzT-Fke-p0&e= > > >> > > > >> > Thank you! > > >> > > > >> > Thanks, > > >> > > > >> > Douglas Duckworth, MSc, LFCS > > >> > HPC System Administrator > > >> > Scientific Computing Unit > > >> > Weill Cornell Medicine > > >> > 1300 York - LC-502 > > >> > E: doug(a)med.cornell.edu > > >> > O: 212-746-6305 > > >> > F: 212-746-8690 > > >> > > > >> > > > >> > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler > > >> > <dholler(a)redhat.com> wrote: > > >> > > > >> > > Would you please share the vdsm.log and the supervdsm.log from > > >> > > this host? > > >> > > > > >> > > On Wed, 22 Aug 2018 11:36:09 -0400 > > >> > > Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > >> > > > > >> > > > Hi > > >> > > > > > >> > > > I keep losing ib0 connection on hypervisor after adding host > > >> > > > to engine. This makes the host not really work since NFS > > >> > > > will be mounted over ib0. > > >> > > > > > >> > > > I don't really understand why this occurs. > > >> > > > > > >> > > > OS: > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > >> > > > CentOS Linux release 7.5.1804 (Core) > > >> > > > > > >> > > > Here's the network script: > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# > > >> > > > cat /etc/sysconfig/network-scripts/ifcfg-ib0 DEVICE=ib0 > > >> > > > BOOTPROTO=static > > >> > > > IPADDR=172.16.0.207 > > >> > > > NETMASK=255.255.255.0 > > >> > > > ONBOOT=yes > > >> > > > ZONE=public > > >> > > > > > >> > > > When I try "ifup" > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# ifup ib0 > > >> > > > Error: Connection activation failed: No suitable device > > >> > > > found for this connection. > > >> > > > > > >> > > > The error in syslog: > > >> > > > > > >> > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source > > >> > > > 172.16.0.87 from 172.16.0.49, on dev ib0 > > >> > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > >> > > > [1534951913.7486] audit: op="connection-activate" > > >> > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0" > > >> > > > result="fail" reason="No suitable device found for this > > >> > > > connection. > > >> > > > > > >> > > > As you can see media state up: > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# ip a > > >> > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state > > >> > > > UNKNOWN group default qlen 1000 > > >> > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > >> > > > inet 127.0.0.1/8 scope host lo > > >> > > > valid_lft forever preferred_lft forever > > >> > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq > > >> > > > master ovirtmgmt state UP group default qlen 1000 > > >> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > >> > > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq > > >> > > > state DOWN group default qlen 1000 > > >> > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > >> > > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > > >> > > > mq state DOWN group default qlen 1000 > > >> > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > >> > > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > > >> > > > mq state DOWN group default qlen 1000 > > >> > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > >> > > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > >> > > > pfifo_fast state UNKNOWN group default qlen 1000 > > >> > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > >> > > > inet 169.254.0.2/16 brd 169.254.255.255 scope global > > >> > > > idrac valid_lft forever preferred_lft forever > > >> > > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq > > >> > > > state UP group default qlen 256 > > >> > > > link/infiniband > > >> > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 > > >> > > > brd > > >> > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > >> > > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > > >> > > > state DOWN group default qlen 1000 link/ether > > >> > > > 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff 9: br-int: > > >> > > > <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group > > >> > > > default qlen 1000 link/ether 3e:32:e6:66:98:49 brd > > >> > > > ff:ff:ff:ff:ff:ff 25: ovirtmgmt: > > >> > > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > > >> > > > state UP group default qlen 1000 link/ether > > >> > > > 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff inet 10.0.0.183/16 > > >> > > > brd 10.0.255.255 scope global ovirtmgmt valid_lft forever > > >> > > > preferred_lft forever 26: genev_sys_6081: > > >> > > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc noqueue > > >> > > > master ovs-system state UNKNOWN group default qlen 1000 > > >> > > > link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff > > >> > > > 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > > >> > > > state DOWN group default qlen 1000 link/ether > > >> > > > 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > >> > > > > > >> > > > The card is FDR: > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > >> > > > 01:00.0 Network controller: Mellanox Technologies MT27500 > > >> > > > Family [ConnectX-3] > > >> > > > Subsystem: Mellanox Technologies Device 0051 > > >> > > > > > >> > > > Latest OFED driver: > > >> > > > > > >> > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > >> > > > > > >> > > > HCA driver loaded > > >> > > > > > >> > > > Configured IPoIB devices: > > >> > > > ib0 > > >> > > > > > >> > > > Currently active IPoIB devices: > > >> > > > ib0 > > >> > > > Configured Mellanox EN devices: > > >> > > > > > >> > > > Currently active Mellanox devices: > > >> > > > ib0 > > >> > > > > > >> > > > The following OFED modules are loaded: > > >> > > > > > >> > > > rdma_ucm > > >> > > > rdma_cm > > >> > > > ib_ipoib > > >> > > > mlx4_core > > >> > > > mlx4_ib > > >> > > > mlx4_en > > >> > > > mlx5_core > > >> > > > mlx5_ib > > >> > > > ib_uverbs > > >> > > > ib_umad > > >> > > > ib_ucm > > >> > > > ib_cm > > >> > > > ib_core > > >> > > > mlxfw > > >> > > > mlx5_fpga_tools > > >> > > > > > >> > > > I can add an IP to ib0 using "ip addr" though I need Network > > >> > > > Manager to work with ib0. > > >> > > > > > >> > > > > > >> > > > Thanks, > > >> > > > > > >> > > > Douglas Duckworth, MSc, LFCS > > >> > > > HPC System Administrator > > >> > > > Scientific Computing Unit > > >> > > > Weill Cornell Medicine > > >> > > > 1300 York - LC-502 > > >> > > > E: doug(a)med.cornell.edu > > >> > > > O: 212-746-6305 > > >> > > > F: 212-746-8690 > > >> > > > > >> > > > > >> > > >> > > > > >

2 1

Console to HostedEngine
by Daniel Menzel 24 Aug '18

24 Aug '18

Hi at all, we cannot access our hosted engine anymore. It started with and overfull /var due to a growing database. We access the engine via SSH and tried to fix that - but somehow we seem to have produced another problem on the SSH server itself. So unfortunately we can not login anymore. We then tried to access it via its host and a "hosted-engine --console" but ran into an internal error: cannot find character device <null> which I know from KVM. With other VMs I could follow the RedHat's advice to add a console (https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/ht…) but although I edited the hosted engine's profile those changes weren't applied - and after an engine restart even deleted again. That kind of makes sense to me, but limits my options. So my question is: Is there any idea how can I access the the console with my current limitations to fix the SSH server's problems and then hopefully fix everything? Regards Daniel

2 4

Re: losing ib0 connection after activating host
by Douglas Duckworth 24 Aug '18

24 Aug '18

Hi Dominik Yes, the network-script was created by our Ansible role that deploys CentOS hosts. It pulls the IP from DNS then templates the script and copies to host. I will try this oVirt step then see if it works! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine 1300 York - LC-502 E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler <dholler(a)redhat.com> wrote: > Is ifcfg-ib0 created before adding the host? > Can ib0 be reconfigured using engine, e.g. by > "Compute > Hosts > hostx > Network Interfaces > Setup Host Networks"? > If this some kind of self-hosted engine? > > On Thu, 23 Aug 2018 09:30:59 -0400 > Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > > Here's a link to the files: > > > > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_ > 2wjZ6Vo&d=DwICAg&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu2s&r=2Fzhh_ > 78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw&m=Y25-OOvgu58jlC82- > fzBeNIpQ7ZscoHznffUhqE6EBM&s=QQXlC9Tisa60TvimyS3BnFDCaDF7VP > D8eCzT-Fke-p0&e= > > > > Thank you! > > > > Thanks, > > > > Douglas Duckworth, MSc, LFCS > > HPC System Administrator > > Scientific Computing Unit > > Weill Cornell Medicine > > 1300 York - LC-502 > > E: doug(a)med.cornell.edu > > O: 212-746-6305 > > F: 212-746-8690 > > > > > > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler <dholler(a)redhat.com> > > wrote: > > > > > Would you please share the vdsm.log and the supervdsm.log from this > > > host? > > > > > > On Wed, 22 Aug 2018 11:36:09 -0400 > > > Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > > > > > > Hi > > > > > > > > I keep losing ib0 connection on hypervisor after adding host to > > > > engine. This makes the host not really work since NFS will be > > > > mounted over ib0. > > > > > > > > I don't really understand why this occurs. > > > > > > > > OS: > > > > > > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > > > CentOS Linux release 7.5.1804 (Core) > > > > > > > > Here's the network script: > > > > > > > > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0 > > > > DEVICE=ib0 > > > > BOOTPROTO=static > > > > IPADDR=172.16.0.207 > > > > NETMASK=255.255.255.0 > > > > ONBOOT=yes > > > > ZONE=public > > > > > > > > When I try "ifup" > > > > > > > > [root@ovirt-hv2 ~]# ifup ib0 > > > > Error: Connection activation failed: No suitable device found for > > > > this connection. > > > > > > > > The error in syslog: > > > > > > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87 > > > > from 172.16.0.49, on dev ib0 > > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > > > [1534951913.7486] audit: op="connection-activate" > > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0" > > > > result="fail" reason="No suitable device found for this > > > > connection. > > > > > > > > As you can see media state up: > > > > > > > > [root@ovirt-hv2 ~]# ip a > > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state > > > > UNKNOWN group default qlen 1000 > > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > > inet 127.0.0.1/8 scope host lo > > > > valid_lft forever preferred_lft forever > > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master > > > > ovirtmgmt state UP group default qlen 1000 > > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq > > > > state DOWN group default qlen 1000 > > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq > > > > state DOWN group default qlen 1000 > > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq > > > > state DOWN group default qlen 1000 > > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > > pfifo_fast state UNKNOWN group default qlen 1000 > > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > > > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac > > > > valid_lft forever preferred_lft forever > > > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state > > > > UP group default qlen 256 > > > > link/infiniband > > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd > > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state > > > > DOWN group default qlen 1000 > > > > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff > > > > 9: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > > > group default qlen 1000 > > > > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff > > > > 25: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > > noqueue state UP group default qlen 1000 > > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > > > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt > > > > valid_lft forever preferred_lft forever > > > > 26: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 > > > > qdisc noqueue master ovs-system state UNKNOWN group default qlen > > > > 1000 link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff > > > > 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state > > > > DOWN group default qlen 1000 > > > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > > > > > > > The card is FDR: > > > > > > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > > > 01:00.0 Network controller: Mellanox Technologies MT27500 Family > > > > [ConnectX-3] > > > > Subsystem: Mellanox Technologies Device 0051 > > > > > > > > Latest OFED driver: > > > > > > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > > > > > > > HCA driver loaded > > > > > > > > Configured IPoIB devices: > > > > ib0 > > > > > > > > Currently active IPoIB devices: > > > > ib0 > > > > Configured Mellanox EN devices: > > > > > > > > Currently active Mellanox devices: > > > > ib0 > > > > > > > > The following OFED modules are loaded: > > > > > > > > rdma_ucm > > > > rdma_cm > > > > ib_ipoib > > > > mlx4_core > > > > mlx4_ib > > > > mlx4_en > > > > mlx5_core > > > > mlx5_ib > > > > ib_uverbs > > > > ib_umad > > > > ib_ucm > > > > ib_cm > > > > ib_core > > > > mlxfw > > > > mlx5_fpga_tools > > > > > > > > I can add an IP to ib0 using "ip addr" though I need Network > > > > Manager to work with ib0. > > > > > > > > > > > > Thanks, > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > HPC System Administrator > > > > Scientific Computing Unit > > > > Weill Cornell Medicine > > > > 1300 York - LC-502 > > > > E: doug(a)med.cornell.edu > > > > O: 212-746-6305 > > > > F: 212-746-8690 > > > > > > > >

2 2