Unable to start or create a virtual machine
by Shikhar Verma
Hi,
I have created the virtual machine from ovirt manager but when I am trying to get the console of the vm to do the installation of it but it is only giving two two line and even i have tried as run once and selected CD ROM as first priority and attached the ISO of centos7 SeaBIOS (version 1.11.0-2.e17) Machine UUID ------- Also, from manager, newly launched vm is showing green.. And from the host machine, it is showing this error Jan 21 19:23:24 servera libvirtd: 2019-01-21 13:53:24.286+0000: 12800: error : qemuDomainAgentAvailable:9133 : Guest agent is not responding: QEMU guest agent is not connected I am using the latest version version of ovirt-engine & host as well.
Setup I have create on my Laptop using vmware workstation:
Centos server : Manager : server.example.com (192.168.28.128)
Centos : Host : servera.example.com 192.168.28.130
Centos : NFS Server : utility.example.com 192.168.28.129 (create fs's as /exports and exported as /exports/iso & /exports/data1 )
In /exports/iso ==> I have rhel 7 & centos 7 iso images and /exports/data1 ( will be using for disk images of vms)
From Manager : I have added host and also create domains one as datadomain (/exports/data1) and another one is isodomain (/exports/iso)
Now issue i am facing when I am trying to create a vm, it is allowing me to create vm but console is blank.
5 years, 3 months
Vdo based storage domain
by Leo David
Hi everyone,
I have read and tried to understand how vdo works, and it seems pretty
impressive, but i feel like i am missing something.
At the end of the day, my question is:
Can I entirelly rely on the 10 times increased usable space ?
As and example, I have created a 4.8tb volume based on 3x480gb samsung
sm863a enterprise ssd devices. (full replica 3).
Should I be confident that I can use 4.8tb for my storage domain (vms data
store) without concerning about data repetabilitty in the future ?
I am just trying to think as an end-user consumer that cannot predict if
data that will be written to the device will be compresable or not, and
only see 4.8tb as trully usable space.
Any thoughts, any experience to share ?
Im sorry if my question sounds noob, but i'm just trying to get under end
user's hat.
Thank you very much,
Have a good day !
Leo
5 years, 3 months
failed to attach a samba active directory
by adam_xu＠adagene.com.cn
Hello ovirt developers. I have attached a samba ad dc successfully more then 10 times before via this link
https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html
but this time, when I try to attach a samba ad dc, I got some certificate error.
my test engine version: 4.2.7 or 4.2.8 (both have been tested)
full procedure like below:
# ovirt-engine-extension-aaa-ldap-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files: ['/etc/ovirt-engine-extension-aaa-ldap-setup.conf.d/10-packaging.conf']
Log file: /tmp/ovirt-engine-extension-aaa-ldap-setup-20190122102450-0b1sjq.log
Version: otopi-1.7.8 (otopi-1.7.8-1.el7)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment customization
Welcome to LDAP extension configuration program
Available LDAP implementations:
1 - 389ds
2 - 389ds RFC-2307 Schema
3 - Active Directory
4 - IBM Security Directory Server
5 - IBM Security Directory Server RFC-2307 Schema
6 - IPA
7 - Novell eDirectory RFC-2307 Schema
8 - OpenLDAP RFC-2307 Schema
9 - OpenLDAP Standard Schema
10 - Oracle Unified Directory RFC-2307 Schema
11 - RFC-2307 Schema (Generic)
12 - RHDS
13 - RHDS RFC-2307 Schema
14 - iPlanet
Please select: 3
Please enter Active Directory Forest name: ntbaobei.com
[ INFO ] Resolving Global Catalog SRV record for ntbaobei.com
NOTE:
It is highly recommended to use secure protocol to access the LDAP server.
Protocol startTLS is the standard recommended method to do so.
Only in cases in which the startTLS is not supported, fallback to non standard ldaps protocol.
Use plain for test environments only.
Please select protocol to use (startTLS, ldaps, plain) [startTLS]:
Please select method to obtain PEM encoded CA certificate (File, URL, Inline, System, Insecure): File
File path: /etc/pki/ca-trust/extracted/pem/ca.pem
[ INFO ] Resolving SRV record 'ntbaobei.com'
[ INFO ] Connecting to LDAP using 'ldap://dc1.ntbaobei.com:389'
[ INFO ] Executing startTLS
[ INFO ] Connection succeeded
Enter search user DN (for example uid=username,dc=example,dc=com or leave empty for anonymous): vmail(a)ntbaobei.com
Enter search user password:
[ INFO ] Attempting to bind using 'vmail(a)ntbaobei.com'
Are you going to use Single Sign-On for Virtual Machines (Yes, No) [Yes]:
NOTE:
Profile name has to match domain name, otherwise Single Sign-On for Virtual Machines will not work.
Please specify profile name that will be visible to users [ntbaobei.com]:
[ INFO ] Stage: Setup validation
NOTE:
It is highly recommended to test drive the configuration before applying it into engine.
Login sequence is executed automatically, but it is recommended to also execute Search sequence manually after successful Login sequence.
Please provide credentials to test login flow:
Enter user name: xingya_xu
Enter user password:
[ INFO ] Executing login sequence...
Login output:
2019-01-22 10:26:06,777+08 INFO ========================================================================
2019-01-22 10:26:06,800+08 INFO ============================ Initialization ============================
2019-01-22 10:26:06,801+08 INFO ========================================================================
2019-01-22 10:26:06,841+08 INFO Loading extension 'ntbaobei.com-authn'
2019-01-22 10:26:06,911+08 INFO Extension 'ntbaobei.com-authn' loaded
2019-01-22 10:26:06,917+08 INFO Loading extension 'ntbaobei.com'
2019-01-22 10:26:06,953+08 INFO Extension 'ntbaobei.com' loaded
2019-01-22 10:26:06,954+08 INFO Initializing extension 'ntbaobei.com-authn'
2019-01-22 10:26:06,960+08 INFO [ovirt-engine-extension-aaa-ldap.authn::ntbaobei.com-authn] Creating LDAP pool 'authz'
2019-01-22 10:26:07,324+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58
2019-01-22 10:26:07,325+08 INFO [ovirt-engine-extension-aaa-ldap.authn::ntbaobei.com-authn] Creating LDAP pool 'authn'
2019-01-22 10:26:08,748+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58
2019-01-22 10:26:08,773+08 WARNING Ignoring records from pool: 'authz'
2019-01-22 10:26:08,774+08 WARNING Ignoring records from pool: 'authz'
2019-01-22 10:26:08,775+08 INFO Extension 'ntbaobei.com-authn' initialized
2019-01-22 10:26:08,776+08 INFO Initializing extension 'ntbaobei.com'
2019-01-22 10:26:08,776+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'authz'
2019-01-22 10:26:09,414+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] LDAP pool 'authz' information: vendor='Samba Team (https://www.samba.org)' version='4.8.8-SerNet-RedHat-18.el7'
2019-01-22 10:26:09,415+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'gc'
2019-01-22 10:26:10,148+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58
2019-01-22 10:26:10,179+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'authz(a)ntbaobei.com'
2019-01-22 10:26:10,269+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58
2019-01-22 10:26:10,270+08 WARNING Ignoring records from pool: 'authz(a)ntbaobei.com'
2019-01-22 10:26:10,282+08 WARNING Ignoring records from pool: 'authz(a)ntbaobei.com'
2019-01-22 10:26:10,283+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Available Namespaces: []
2019-01-22 10:26:10,283+08 INFO Extension 'ntbaobei.com' initialized
2019-01-22 10:26:10,284+08 INFO Start of enabled extensions list
2019-01-22 10:26:10,284+08 INFO Instance name: 'ntbaobei.com', Extension name: 'ovirt-engine-extension-aaa-ldap.authz', Version: '1.3.8', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.8-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmp01ChKj/extensions.d/ntbaobei.com.properties', Initialized: 'true'
2019-01-22 10:26:10,285+08 INFO Instance name: 'ntbaobei.com-authn', Extension name: 'ovirt-engine-extension-aaa-ldap.authn', Version: '1.3.8', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.8-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmp01ChKj/extensions.d/ntbaobei.com-authn.properties', Initialized: 'true'
2019-01-22 10:26:10,285+08 INFO End of enabled extensions list
2019-01-22 10:26:10,285+08 INFO ========================================================================
2019-01-22 10:26:10,285+08 INFO ============================== Execution ===============================
2019-01-22 10:26:10,286+08 INFO ========================================================================
2019-01-22 10:26:10,286+08 INFO Iteration: 0
2019-01-22 10:26:10,287+08 INFO Profile='ntbaobei.com' authn='ntbaobei.com-authn' authz='ntbaobei.com' mapping='null'
2019-01-22 10:26:10,287+08 INFO API: -->Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ntbaobei.com' user='testusernamehere'
2019-01-22 10:26:10,290+08 INFO API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ntbaobei.com' result=GENERAL_ERROR
2019-01-22 10:26:10,296+08 SEVERE Authn.Result code is: GENERAL_ERROR
[ ERROR ] Login sequence failed
Please investigate details of the failure (search for lines containing SEVERE log level).
Select test sequence to execute (Done, Abort, Login, Search) [Abort]:
[ ERROR ] Failed to execute stage 'Setup validation': Aborted by user
[ INFO ] Stage: Clean up
Log file is available at /tmp/ovirt-engine-extension-aaa-ldap-setup-20190122102450-0b1sjq.log:
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
I have copy the CA certificate file from samba ad dc to /etc/pki/ca-trust/extracted/pem/ca.pem in the engine server.
I think the warning "SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), " is the reason why I can not pass user login test?
I once passed the user login test in some older version such as 4.2.6.
I can still pass the user login test using startTLS Insecure way.
full log has been attached to this mail. thanks.
yours Adam
5 years, 3 months
Re: oVirt Node install - kickstart postintall
by Ryan Barry
The quick answer is that operations in %post must be performed before
'nodectl init'. If that's done, they'll happily stick.
On Mon, Jan 14, 2019, 9:29 PM Brad Riemann <Brad.Riemann(a)cloud5.com wrote:
> Can you send over the whole %post segment i via pastebin? I think i've run
> across something similar that i addressed, but just want to be sure.
>
>
> Brad Riemann
> Sr. System Architect
> Cloud5 Communications
>
> ------------------------------
> *From:* jeanbaptiste(a)nfrance.com <jeanbaptiste(a)nfrance.com>
> *Sent:* Friday, January 11, 2019 1:51:14 AM
> *To:* users(a)ovirt.org
> *Subject:* [ovirt-users] oVirt Node install - kickstart postintall
>
> CAUTION: This email originated from outside of CLOUD5. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
> Hello everybody,
>
> Since days, I'm trying to install oVirt (via Foreman) in network mode
> (TFTP net install).
> All is great, but I want to make some actions in postinstall (%post).
> Some actions are relatated to /etc/sysconfig/network-interfaces and
> another action is related to root authorized_keys.
>
> When I try to add pub-key to a created authorized_keys for root, I work
> (verified into anaconda.
> But after installation and anaconda reboot, I've noticed all my %post
> actions in /(root) are discared. After reboot, there is nothing in
> /root/.ssh for example.
> Whereas, in /etc, all my modications are preserved.
>
> I thought to a Selinux relative issue, but It is not relative to Selinux
>
> I miss something. Please can you help to understand how oVirt install /
> partition work ?
>
> thanks for all
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/BCQEKHCPSFD...
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TGT7K3N245S...
>
5 years, 3 months
multiple engines (active passive)
by maoz zadok
Hello users,
After a painful experience with a crashed engine and a problematic recovery
from a backup, I was thinking to create one more engine in standby mode in
the same network, that will automatically recover backup files from the
active engine on a daily/hourly basis.
This way I'll run recovery tests every day automatically and easily switch
in case of engine failure with a DNS record change to the passive engine.
So the main question, is it harmful to have more then one engine alive if
only one is been modified? can the standby engine affect the host nodes?
5 years, 3 months
How to import from another oVirt / RHV environment
by Gianluca Cecchi
Hello,
I have two different oVirt 4.2 environments and I want to migrate some big
VMs from one to another.
I'm not able to detach and attach the block based domain where are the
disks of source.
And I cannot use export domain functionality.
But the 2 environments, both hosts and engines, are able to communicate.
Can I use in some way the import Virtual Machine functionality with the
"KVM(via Libvirt)" source type?
Or is there (eventually via command line) a way to use virt-v2v in this
case?
Thanks,
Gianluca
5 years, 3 months
GlusterFS and oVirt
by Magnus Isaksson
Hello
I have quite some trouble getting Gluster to work.
I have 4 nodes running CentOS and oVirt. These 4 nodes is split up in 2 clusters.
I do not run Gluster via oVirt, i run it stand alone to be able to use all 4 nodes into one gluster volume.
I can add all peers successfully, and i can create an volume and start it with sucess, but after that it starts to getting troublesome.
If i run gluster volume status after starting the volume it times out, i have read that ping-time needs to bee more than 0 so i set it on 30, Still the same problem.
From now on, i can not stop a volume nor remove it, i have to stop glusterd and remove it from /var/lib/gluster/vols/* on all nodes to be able to do anything with gluster.
From time to time when i do a gluster peer status it shows "disconnected" and when i run it again directly after it show "connected"
I get a lot of these errors in glusterd.log
[2019-01-20 12:53:46.087848] W [rpc-clnt-ping.c:223:rpc_clnt_ping_cbk] 0-management: socket disconnected
[2019-01-20 12:53:46.087858] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed
[2019-01-20 12:53:55.091598] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed
[2019-01-20 12:53:56.094846] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed
[2019-01-20 12:53:56.097482] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed
What am i doing wrong?
//Magnus
5 years, 3 months
HyperConverged Self-Hosted deployment fails
by hunter86_bg＠yahoo.com
Hello Community,
recently I managed somehow to deploy a 2 node cluster on GlusterFS , but after a serious engine failiure - I have decided to start from scratch.
What I have done so far:
1. Inctall CentOS7 from scratch
2. Add ovirt repositories, vdo,cockpit for ovirt
3. Deployed the gluster cluster using cockpit
4. Trying to deploy the hosted-engine , which has failed several times.
Up to now I have detected that ovirt-ha-agent is giving:
яну 19 13:54:57 ovirt1.localdomain ovirt-ha-agent[16992]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent
return action(he)
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_proper
return he.start_monitoring()
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in start_monitoring
self._initialize_broker()
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _initialize_broker
m.get('options', {}))
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_monitor
.format(type, options, e ))
RequestError: Failed to start monitor ping, options {'addr': '192.168.1.1'}: [Errno 2] No such file or directory
According to https://access.redhat.com/solutions/3353391 , the /etc/ovirt-hosted-engine/hosted-engine.conf should be empty , but it's OK:
[root@ovirt1 tmp]# cat /etc/ovirt-hosted-engine/hosted-engine.conf
fqdn=engine.localdomain
vm_disk_id=bb0a9839-a05d-4d0a-998c-74da539a9574
vm_disk_vol_id=c1fc3c59-bc6e-4b74-a624-557a1a62a34f
vmid=d0e695da-ec1a-4d6f-b094-44a8cac5f5cd
storage=ovirt1.localdomain:/engine
nfs_version=
mnt_options=backup-volfile-servers=ovirt2.localdomain:ovirt3.localdomain
conf=/var/run/ovirt-hosted-engine-ha/vm.conf
host_id=1
console=vnc
domainType=glusterfs
spUUID=00000000-0000-0000-0000-000000000000
sdUUID=444e524e-9008-48f8-b842-1ce7b95bf248
connectionUUID=e29cf818-5ee5-46e1-85c1-8aeefa33e95d
ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem
ca_subject="C=EN, L=Test, O=Test, CN=Test"
vdsm_use_ssl=true
gateway=192.168.1.1
bridge=ovirtmgmt
metadata_volume_UUID=a3be2390-017f-485b-8f42-716fb6094692
metadata_image_UUID=368fb8dc-6049-4ef0-8cf8-9d3c4d772d59
lockspace_volume_UUID=41762f85-5d00-488f-bcd0-3de49ec39e8b
lockspace_image_UUID=de100b9b-07ac-4986-9d86-603475572510
conf_volume_UUID=4306f6d6-7fe9-499d-81a5-6b354e8ecb79
conf_image_UUID=d090dd3f-fc62-442a-9710-29eeb56b0019
# The following are used only for iSCSI storage
iqn=
portal=
user=
password=
port=
Ovirt-ha-agent version is:
ovirt-hosted-engine-ha-2.2.18-1.el7.noarch
Can you guide me in order to resolve this issue and to deploy the self-hosted engine ?
Where should I start from ?
5 years, 3 months
oVirt 4.3 rc2: export ova and attempt to import to itself via script?
by Gianluca Cecchi
Hello,
I verified that in 4.3 rc2 I can now export as ova a running VM:
I have a CentOS Atomic 7 VM and when I export as ova, a snapshot is
executed and then the ova file seems directly generated, bypassing the
previous copy on storage domain:
[root@hcinode1 ]# ll /export/
total 1141632
-rw-------. 1 root root 1401305088 Jan 18 11:10 c7atomic1.ova.tmp
[root@hcinode1 ]# ll /export/
total 1356700
-rw-------. 1 root root 1401305088 Jan 18 11:10 c7atomic1.ova
[root@hcinode1 ]#
And at the end the snaphsot has been correctly removed.
events:
Vm c7atomic1 was exported successfully as a Virtual Appliance to path
/export/c7atomic1.ova on Host hcinode1 1/18/19 11:10:23 AM
Starting to export Vm c7atomic1 as a Virtual Appliance 1/18/19 11:08:47 AM
Now if I try for test to import this generated OVA to the same environment
with this script:
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload...
I get a duplicate error, see below. Is it a limitation of the python script
or what?
If I go from the gui and I chose "Virtual Appliance (OVA)" as source and
the same host and file path I can successfully import the OVA, provided I
change the name of the VM to be imported.
Thanks,
Gianluca
[root@hcinode1 ~]# ./upload_ova_as_vm.py /export/c7atomic1.ova Default
vmstore
Connecting...
Creating disk...
{'capacityAllocationUnits': 'byte * 2^30', 'capacity': '10', 'description':
'Auto-generated for Export To OVA', 'pass-discard': 'false', 'format': '
http://www.gnome.org/~markmc/qcow-image-format.html', 'volume-type':
'Sparse', 'boot': 'true', 'disk-alias': 'GlanceDisk-5f429e6',
'disk-interface': 'VirtIO', 'volume-format': 'COW', 'cinder_volume_type':
'', 'disk-description': 'CentOS 7 Atomic Host Image v1802 for x86_64
(5f429e6)', 'parentRef': '', 'fileRef':
'c6b2e076-1519-433e-9b37-2005c9ce6d2e', 'populatedSize': '1401290752',
'disk_storage_type': 'IMAGE', 'diskId':
'e4f92226-0f56-4822-a622-d1ebff41df9f', 'wipe-after-delete': 'false'}
Traceback (most recent call last):
File "./upload_ova_as_vm.py", line 133, in <module>
name=target_storage_domain_name
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py", line
6794, in add
return self._internal_add(disk, headers, query, wait)
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 232,
in _internal_add
return future.wait() if wait else future
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 55,
in wait
return self._code(response)
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 229,
in callback
self._check_fault(response)
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 132,
in _check_fault
self._raise_error(response, body)
File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 118,
in _raise_error
raise error
ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is
"[Internal Engine Error]". HTTP response code is 400.
[root@hcinode1 ~]#
On engine:
2019-01-18 11:24:46,561+01 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (default task-26)
[3b08d759-27d3-42f3-9eee-95c135e88a7b] BaseAsyncTask::startPollingTask:
Starting to poll task '81fbeac3-2c58-4f8a-a3da-44bdbe585beb'.
2019-01-18 11:24:46,691+01 ERROR
[org.ovirt.engine.core.bll.storage.disk.AddDiskCommand] (default task-26)
[3b08d759-27d3-42f3-9eee-95c135e88a7b] Command
'org.ovirt.engine.core.bll.storage.disk.AddDiskCommand' failed:
CallableStatementCallback; SQL [{call insertpermission(?, ?, ?, ?,
?)}ERROR: duplicate key value violates unique constraint
"idx_combined_ad_role_object"
Detail: Key (ad_element_id, role_id,
object_id)=(9d37881c-1991-11e9-b002-00163e7cb696,
def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f)
already exists.
Where: SQL statement "INSERT INTO permissions (
ad_element_id,
id,
role_id,
object_id,
object_type_id
)
VALUES (
v_ad_element_id,
v_id,
v_role_id,
v_object_id,
v_object_type_id
)"
PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at
SQL statement; nested exception is org.postgresql.util.PSQLException:
ERROR: duplicate key value violates unique constraint
"idx_combined_ad_role_object"
Detail: Key (ad_element_id, role_id,
object_id)=(9d37881c-1991-11e9-b002-00163e7cb696,
def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f)
already exists.
Where: SQL statement "INSERT INTO permissions (
ad_element_id,
id,
role_id,
object_id,
object_type_id
)
VALUES (
v_ad_element_id,
v_id,
v_role_id,
v_object_id,
v_object_type_id
)"
PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at
SQL statement
2019-01-18 11:24:46,691+01 ERROR
[org.ovirt.engine.core.bll.storage.disk.AddDiskCommand] (default task-26)
[3b08d759-27d3-42f3-9eee-95c135e88a7b] Exception:
org.springframework.dao.DuplicateKeyException: CallableStatementCallback;
SQL [{call insertpermission(?, ?, ?, ?, ?)}ERROR: duplicate key value
violates unique constraint "idx_combined_ad_role_object"
Detail: Key (ad_element_id, role_id,
object_id)=(9d37881c-1991-11e9-b002-00163e7cb696,
def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f)
already exists.
Where: SQL statement "INSERT INTO permissions (
ad_element_id,
id,
role_id,
object_id,
object_type_id
)
VALUES (
v_ad_element_id,
v_id,
v_role_id,
v_object_id,
v_object_type_id
)"
PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at
SQL statement; nested exception is org.postgresql.util.PSQLException:
ERROR: duplicate key value violates unique constraint
"idx_combined_ad_role_object"
Detail: Key (ad_element_id, role_id,
object_id)=(9d37881c-1991-11e9-b002-00163e7cb696,
def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f)
already exists.
Where: SQL statement "INSERT INTO permissions (
ad_element_id,
id,
role_id,
object_id,
object_type_id
)
VALUES (
v_ad_element_id,
v_id,
v_role_id,
v_object_id,
v_object_type_id
)"
PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at
SQL statement
at
org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.doTranslate(SQLErrorCodeSQLExceptionTranslator.java:243)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:72)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.JdbcTemplate.translateException(JdbcTemplate.java:1402)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:1065)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:1104)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.simple.AbstractJdbcCall.executeCallInternal(AbstractJdbcCall.java:414)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.simple.AbstractJdbcCall.doExecute(AbstractJdbcCall.java:374)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:198)
[spring-jdbc.jar:5.0.4.RELEASE]
at
org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:135)
[dal.jar:]
at
org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:130)
[dal.jar:]
at
org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeModification(SimpleJdbcCallsHandler.java:76)
[dal.jar:]
at
org.ovirt.engine.core.dao.PermissionDaoImpl.save(PermissionDaoImpl.java:256)
[dal.jar:]
at
org.ovirt.engine.core.dao.PermissionDaoImpl.save(PermissionDaoImpl.java:22)
[dal.jar:]
at
org.ovirt.engine.core.bll.MultiLevelAdministrationHandler.addPermission(MultiLevelAdministrationHandler.java:67)
[bll.jar:]
at
org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.addDiskPermissions(AddDiskCommand.java:628)
[bll.jar:]
at
org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.createDiskBasedOnImage(AddDiskCommand.java:558)
[bll.jar:]
at
org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.executeVmCommand(AddDiskCommand.java:429)
[bll.jar:]
at
org.ovirt.engine.core.bll.VmCommand.executeCommand(VmCommand.java:158)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1147)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.executeActionInTransactionScope(CommandBase.java:1305)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:1954)
[bll.jar:]
at
org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:164)
[utils.jar:]
at
org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:103)
[utils.jar:]
at
org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1365)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:413)
[bll.jar:]
at
org.ovirt.engine.core.bll.executor.DefaultBackendActionExecutor.execute(DefaultBackendActionExecutor.java:13)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runAction(Backend.java:450)
[bll.jar:]
at
org.ovirt.engine.core.bll.Backend.runActionImpl(Backend.java:432) [bll.jar:]
at org.ovirt.engine.core.bll.Backend.runAction(Backend.java:387)
[bll.jar:]
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[rt.jar:1.8.0_191]
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
[rt.jar:1.8.0_191]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_191]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_191]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:509)
at
org.jboss.as.weld.ejb.DelegatingInterceptorInvocationContext.proceed(DelegatingInterceptorInvocationContext.java:92)
[wildfly-weld-ejb-14.0.1.Final.jar:14.0.1.Final]
at
org.jboss.weld.interceptor.proxy.WeldInvocationContextImpl.interceptorChainCompleted(WeldInvocationContextImpl.java:107)
[weld-core-impl-3.0.5.Final.jar:3.0.5.Final]
. . .
at
org.jboss.threads.EnhancedQueueExecutor$ThreadBody.run(EnhancedQueueExecutor.java:1378)
at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_191]
Caused by: org.postgresql.util.PSQLException: ERROR: duplicate key value
violates unique constraint "idx_combined_a
d_role_object"
Detail: Key (ad_element_id, role_id,
object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-de
f00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists.
5 years, 3 months
