February 2019 - Users - oVirt List Archives

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, Thanks, you're welcome! It's generally possible to add persistent rules by either using the legacy /etc/rc.d/rc.local boot script (chmod +x /etc/rc.d/rc.local and put the relevant commands at the end of the file, that way you can actually run any commands) or by using the /etc/sysconfig/network-scripts/rule-<interface name> e.g. rule-ovirtmgmt or rule-eno3 (just put in the file "to 172.22.20.31 priority 32764" - without quotes), however of course this needs to be tested to verify that it works. I forwarded the issue to the network team and hopefully they will update soon. Thanks in advance, On Tue, Feb 12, 2019 at 10:17 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > You have no idea how helpful you have been!!!!!! I’ve been having this > issue for over 2 months and starting to cause major problems. > > > > Please let me know if you find a better solution. I’m going to wait to > hear back from you before implementing. > > > > If we go with this workaround, is there a way to add the ip rule so it’s > persistent? I know how to make the ip route add persistent. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:14 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Yes, it looks like it did. > > I'll try to catch somebody from my local oVirt/RHV networking team to take > a look at this issue, maybe there is a better solution for that issue than > my workaround. > > > > But meanwhile you can use this workaround (ip route add + ip rule add), > just please be aware that these should be run after each host reboot, since > these commands are not persistent. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the results. It appears to fix the issue!! > > > > From non-working system: > > > > -bash-4.2# ip rule add to 172.22.20.31 priority 32764 > > > > -bash-4.2# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms > > 2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:01 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > OK, I think that I have a guess of what may have happened here... > > Can you please run the following command on the (non-working) host: > > ip rule add to 172.22.20.31 priority 32764 > > > > This needs to be run in addition to the ip route add ... command. > > > > And then please run the traceroute command and let me know if that fixed > the issue. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 2

vGPU remote console problems
by Edward Berger 13 Feb '19

13 Feb '19

A coworker and I are trying to bring up some nvidia vGPU VMs on ovirt 4.3, but are experiencing issues with the remote consoles for both Windows and Linux. A windows10 VM for example works OK with a windows remote desktop client after enabling the service inside the VM, but using the oVirt VM portal spice/vnc seems to cause the mouse pointer to disappear and clicks seem to go nowhere. We're more likely to want linux VMs though. CentOS not booting all the way to gnome desktop after installing the nvidia driver. What works well for you? Are there known tweaks I should try to make? Any helpful hints? Thanks!

1 0

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, Yes, it looks like it did. I'll try to catch somebody from my local oVirt/RHV networking team to take a look at this issue, maybe there is a better solution for that issue than my workaround. But meanwhile you can use this workaround (ip route add + ip rule add), just please be aware that these should be run after each host reboot, since these commands are not persistent. Thanks in advance, On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Here’s the results. It appears to fix the issue!! > > > > From non-working system: > > > > -bash-4.2# ip rule add to 172.22.20.31 priority 32764 > > > > -bash-4.2# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms > > 2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:01 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > OK, I think that I have a guess of what may have happened here... > > Can you please run the following command on the (non-working) host: > > ip rule add to 172.22.20.31 priority 32764 > > > > This needs to be run in addition to the ip route add ... command. > > > > And then please run the traceroute command and let me know if that fixed > the issue. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, OK, I think that I have a guess of what may have happened here... Can you please run the following command on the (non-working) host: ip rule add to 172.22.20.31 priority 32764 This needs to be run in addition to the ip route add ... command. And then please run the traceroute command and let me know if that fixed the issue. Thanks in advance, On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, That shouldn't really matter, since ovirtmgmt is just a bridged interface, and unless I'm missing something it shouldn't really affect routing. Can you please also provide the output of "ip rule" from both working and non-working hosts ? Thanks in advance, On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, This is indeed quite weird... It looks like the OS for some reason disregards the static route that you have added. BTW, have you verified that it's indeed was added by running "ip route" following the "ip route add ..." command ? Maybe somebody from the network team has an idea of what may be the cause of this issue... Thanks in advance, On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

Re: Creating a static route
by Lev Veyde 13 Feb '19

13 Feb '19

Hi Doug, In most cases it should not be required, especially as my guess (again it would be easier if you could post the output of the "ip a" and "ip route") is that the eno1 is part of the ovirtmgmt bridge. What is the output of the "traceroute 172.22.20.31" that you get on the host after you have added the static route? Thanks in advance, On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 3

Creating a static route
by doug.l.maxfield＠emcins.com 13 Feb '19

13 Feb '19

Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250 We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61 There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces. Thanks in advance for any help!!! Doug

3 5

another video
by Hetz Ben Hamo 13 Feb '19

13 Feb '19

Hi, This is part 2 of converting VM's from ESXI/vCenter to oVirt 4.3. Feel free to share Link: https://www.youtube.com/watch?v=zDLgAZmOkNs BTW, it looks like even when you attach the virtio-win.iso in the conversion window, it still doesn't actually add the drivers. Imagine my surprise when I found it while I was recording the video ;) Thanks

1 0

Issues adding iscsi storage domain
by Leo David 12 Feb '19

12 Feb '19

Hello everyone, Trying to setup an iscsi target as a storage domain, and it seems not to be possible. Discovered the hosts, the targets are displayed. Selected one target, clicked the "Login" arrow, spinner runs a bit , and the arrow gets grayed out. But no LUNs are displayed, to select from. From this step, I can't go further, if I hit "OK" nothing happends. Just as a thought....ssh into the ovirt node used as initiator, and lsblk command shows the block device as present. So i have to cancel the "New Domain" windows without being able to add the domain, but that iscsi block device still remains present on the hosts. Using 4.2.8 Any thoughts ? Thank you very much ! Leo -- Best regards, Leo David

2 5