April 2019 - Users - oVirt List Archives

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

Planned restart of production services
by Evgheni Dereveanchin 11 May '19

11 May '19

Hi everyone, I will be restarting several production systems within the following hour to apply updates. The following services may be unreachable for some period of time: - resources.ovirt.org - package repositories - jenkins.ovirt.org - CI master Package repositories will be unreachable for a short period of time. No new CI jobs will be started during this period. I will announce you once maintenance is complete. -- Regards, Evgheni Dereveanchin

1 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Re: oVirt and NetApp NFS storage
by Strahil 10 May '19

10 May '19

I know 2 approaches. 1. Use NFS hard mounting option - it will never give error to sanlock and it will be waiting until NFS is recovered (never tries this one, but in theory might work) 2. Change the default sanlock timeout (last time I tried that - it didn't work) . You might need help from Sandro or Sahina for that option. Best Regards, Strahil NikolovOn Apr 18, 2019 11:45, klaasdemter(a)gmail.com wrote: > > Hi, > > I got a question regarding oVirt and the support of NetApp NFS storage. > We have a MetroCluster for our virtual machine disks but a HA-Failover > of that (active IP gets assigned to another node) seems to produce > outages too long for sanlock to handle - that affects all VMs that have > storage leases. NetApp says a "worst case" takeover time is 120 seconds. > That would mean sanlock has already killed all VMs. Is anyone familiar > with how we could setup oVirt to allow such storage outages? Do I need > to use another type of storage for my oVirt VMs because that NFS > implementation is unsuitable for oVirt? > > > Greetings > > Klaas > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TSJJKK5UG57CC…

4 6

Ovirt nodeNG RDMA support?
by michael＠wanderingmad.com 09 May '19

09 May '19

When I was able to load CentosOS as a host OS, Was able to use RDMA, but it seems like the 4.3x branch of nodeNG is missing RDMA support? I enabled rdma and started the service, but gluster refuses to recognize that RDMA is available and always reports RDMA port as 0 and when I try to make a new drive with tcp,rdma transport options, it always fails.

4 6

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 4

Re: All Windows vms report "Actual timezone in guest doesn't match configuration"
by michael＠wanderingmad.com 07 May '19

07 May '19

I got my questions mixed up, restarting guest services does nothing.

6 9

Please Help, Ovirt Node Hosted Engine Deployment Problems 4.3.2
by Todd Barton 06 May '19

06 May '19

I've having to rebuild an environment that started back in the early 3.x days. A lot has changed and I'm attempting to use the Ovirt Node based setup to build a new environment, but I can't get through the hosted engine deployment process via the cockpit (I've done command line as well). I've tried static DHCP address and static IPs as well as confirmed I have resolvable host-names. This is a test environment so I can work through any issues in deployment. When the cockpit is displaying the waiting for host to come up task, the cockpit gets disconnected. It appears to a happen when the bridge network is setup. At that point, the deployment is messed up and I can't return to the cockpit. I've tried this with one or two nic/interfaces and tried every permutation of static and dynamic ip addresses. I've spent a week trying different setups and I've got to be doing something stupid. Attached is a screen capture of the resulting IP info after my latest try failing. I used two nics, one for the gluster and bridge network and the other for the ovirt cockpit access. I can't access cockpit on either ip address after the failure. I've attempted this setup as both a single host hyper-converged setup and a three host hyper-converged environment...same issue in both. Can someone please help me or give me some thoughts on what is wrong? Thanks! Todd Barton

4 13

Re: All hosts non-operational after upgrading from 4.2 to 4.3
by Strahil 02 May '19

02 May '19

Are you able to access your iSCSI via the /rhev/data-center/mnt... mount point ? Best Regards, Strahil NikolovOn Apr 5, 2019 19:04, John Florian <jflorian(a)doubledog.org> wrote: > > I am in a severe pinch here. A while back I upgraded from 4.2.8 to 4.3.3 and only had one step remaining and that was to set the cluster compat level to 4.3 (from 4.2). When I tried this it gave the usual warning that each VM would have to be rebooted to complete, but then I got my first unusual piece when it then told me next that this could not be completed until each host was in maintenance mode. Quirky I thought, but I stopped all VMs and put both hosts into maintenance mode. I then set the cluster to 4.3. Things didn't want to become active again and I eventually noticed that I was being told the DC needed to be 4.3 as well. Don't remember that from before, but oh well that was easy. > > However, the DC and SD remains down. The hosts are non-op. I've powered everything off and started fresh but still wind up in the same state. Hosts will look like their active for a bit (green triangle) but then go non-op after about a minute. It appears that my iSCSI sessions are active/logged in. The one glaring thing I see in the logs is this in vdsm.log: > > 2019-04-05 12:03:30,225-0400 ERROR (monitor/07bb1bf) [storage.Monitor] Setting up monitor for 07bb1bf8-3b3e-4dc0-bc43-375b09e06683 failed (monitor:329) > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 326, in _setupLoop > self._setupMonitor() > File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 348, in _setupMonitor > self._produceDomain() > File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 158, in wrapper > value = meth(self, *a, **kw) > File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 366, in _produceDomain > self.domain = sdCache.produce(self.sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 110, in produce > domain.getRealDomain() > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 51, in getRealDomain > return self._cache._realProduce(self._sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 134, in _realProduce > domain = self._findDomain(sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 151, in _findDomain > return findMethod(sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 176, in _findUnfetchedDomain > raise se.StorageDomainDoesNotExist(sdUUID) > StorageDomainDoesNotExist: Storage domain does not exist: (u'07bb1bf8-3b3e-4dc0-bc43-375b09e06683',) > > How do I proceed to get back operational?

2 1

Re: Fwd: [Gluster-users] Announcing Gluster release 5.5
by Strahil 02 May '19

02 May '19

Hi Darrel, Will it fix the cluster brick sudden death issue ? Best Regards, Strahil NikolovOn Mar 21, 2019 21:56, Darrell Budic <budic(a)onholyground.com> wrote: > > This release of Gluster 5.5 appears to fix the gluster 3.12->5.3 migration problems many ovirt users have encountered. > > I’ll try and test it out this weekend and report back. If anyone else gets a chance to check it out, let us know how it goes! > > -Darrell > >> Begin forwarded message: >> >> From: Shyam Ranganathan <srangana(a)redhat.com> >> Subject: [Gluster-users] Announcing Gluster release 5.5 >> Date: March 21, 2019 at 6:06:33 AM CDT >> To: announce(a)gluster.org, gluster-users Discussion List <gluster-users(a)gluster.org> >> Cc: GlusterFS Maintainers <maintainers(a)gluster.org> >> >> The Gluster community is pleased to announce the release of Gluster >> 5.5 (packages available at [1]). >> >> Release notes for the release can be found at [3]. >> >> Major changes, features and limitations addressed in this release: >> >> - Release 5.4 introduced an incompatible change that prevented rolling >> upgrades, and hence was never announced to the lists. As a result we are >> jumping a release version and going to 5.5 from 5.3, that does not have >> the problem. >> >> Thanks, >> Gluster community >> >> [1] Packages for 5.5: >> https://download.gluster.org/pub/gluster/glusterfs/5/5.5/ >> >> [2] Release notes for 5.5: >> https://docs.gluster.org/en/latest/release-notes/5.5/ >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users(a)gluster.org >> https://lists.gluster.org/mailman/listinfo/gluster-users > >

9 18

oVirt and Ceph iSCSI: separating discovery auth / target auth ?
by Matthias Leopold 01 May '19

01 May '19

Hi, I'm trying to use the Ceph iSCSI gateway with oVirt. According to my tests with oVirt 4.3.2 * you cannot separate iSCSI discovery auth and target auth * you cannot use an iSCSI gateway that has no discovery auth, but uses CHAP for targets This means I'm forced to use the same credentials for discovery auth and target auth. In Ceph iSCSI gateway I can have multiple targets with use different credentials, but I can define discovery auth only once for the whole gateway (or have no discovery auth). If all of this is correct and I want to use the Ceph iSCSI gateway with oVirt * I have to use discovery auth * the credentials for discovery auth will give every other Ceph iSCSI gateway user access to the oVirt target This is not a desirable situation. Did I understand anything wrong? Are there other ways to solve this? thx matthias

1 2

integration with openstack nove-compute
by ehsan.sabooni＠gmail.com 01 May '19

01 May '19

hello dear all, is it possible to make a compute-nove VM inside oVirt, using which, to be able to create VM instances inside oVirt through openstack horizon? to make it simple, is it possible to have oVirt has the hypervisor for openstack, while having a nova-compute node as a VM inside ovirt? as a hint, the same thing is possible via vsphere vCenter, if we install vCenter driver on the nova-compute node. thank you for your support!

2 1

ovirt 4.3.3 Disk for New VM is always Preallocated
by Strahil Nikolov 30 Apr '19

30 Apr '19

Hi All, I have stumbled upon a potential bug in UI. Can someone test it , in order to reproduce it ? How to reproduce:1. Create a VM2. Within the new VM wizard - Create a disk and select Thin Provision.3. Create the VM and wait for the disk to be completed.4. Check the disk within UI - Allocation Policy is set to "Preallocation" Best Regards,Strahil Nikolov

3 4

Update storage lease via python sdk
by klaasdemter＠gmail.com 30 Apr '19

30 Apr '19

Hi, I'm trying to update a storage lease via python sdk but I can’t seem to figure out how to wait for the storage lease configuration to finish. The vm status does not show “configuration in progress” just “up” and the event is created as soon as I issue the update, not when its done. Can someone give me a hint or point me to an example? https://github.com/Klaas-/ovirt-engine-sdk/blob/4094d3a2d4b011d4926e58374dd… Greetings Klaas

1 1

Re: 4.3.x upgrade and issues with OVN
by Weber, Charles (NIH/NIA/IRP) [E] 30 Apr '19

30 Apr '19

Complete shutdown of 4.3.3 cluster, change cluster from 4.2 to 4.3 compatibility and upgrade of all hosts to current 4.3.3 with patches has seemingly fixed everything.

1 0

Re: Please Help, Ovirt Node Hosted Engine Deployment Problems 4.3.2
by Strahil 30 Apr '19

30 Apr '19

> Each data has to be written on the host itself and on the two remote ones so you are going to have 1000 mbps / 2 (external replicas ) / 8 (bit/bytes) = a max of 62.5 MB/s sustained throughput shared between all the VMs and this ignoring all the overheads. > In practice it will be much less ending in a barely usable environment. I am currently in this type of setup (replica 2 arbiter 1 on 1 gbit/s both storage and oVirt connectivity) and the maximum write (sequential) speed I can reach is aprox 89 MB/s. I guess with replica 3 the maximum will be as Simone stated. My maximum read speed is aprox 500 MB/s despite that local NVMe is capable of 1.3 GB/s and I guess FUSE is not using the local brick no matter I have set it up with cluster.use-local (or whatever it was called). If possible , get a 10 gbit/s connectivity or multiple gbit interfaces ( as I'm planing to do in the nearest future). Best Regards, Strahil Nikolov

1 0

HA VM not work when VM OS cannot run normally
by du_hongyu＠yeah.net 30 Apr '19

30 Apr '19

HI， I create a HA VM in ovirt follaw this article https://ovirt.org/develop/ha-vms.html#highly-available-vms-and-io-errors when my vm‘s OS can not run, but ovirt consider this vm is up, so is this a bug for HA VM? can you give me some advise? Regards Hongyu Du

2 4

Ovirt Nested in VMWare (Working approach)
by RabidCicada 30 Apr '19

30 Apr '19

I worked through this previously and posted in IRC yesterday about working around running ovirt nested under VMWare. I figured i'd post it to the mail group so that it would be available in it's entirety here for future reference: The following gists explain the 3 major adjustments that have to be made currently to get nested virt under vmware working: https://gist.github.com/RabidCicada/993349b3a7eaf35637122f0122fdedb3 https://gist.github.com/RabidCicada/bc01eb0b13195faa26520c0fb666ec34 https://gist.github.com/RabidCicada/37ff6f1ed2afd8dd4edefac735536c69 https://gist.github.com/RabidCicada/40655db1582ca5d07c9bbf2c429cdd01 Hopefully it can save others the huge amount of time it took me to figure it all out. Specifically it's a problem with the --machine type at 3 major parts of the vm creation for the hosted-engine. 1) You have to fix the virt-install to use --machine pc-i440fx-rhel7.2.0 2) You have to fix the guestfish spinup of the partially configured vm to use --machine pc-i440fx-rhel7.2.0, where they edit the nic config among other things 3) You have to tell vdsm on the node to use --machine pc-i440fx-rhel7.2.0 I don't know the underlying reason why a --machine type > pc-i440fx-rhel7.2.0 breaks the system but it ends up resulting in a bios freeze. Again, Hope this helps someone. Suggested only to use for a test/dev system.

2 1

[QA][Feedback Needed] RDO Stein integration testing
by Sandro Bonazzola 30 Apr '19

30 Apr '19

Hi, RDO Stein has been released a few days ago: https://blogs.rdoproject.org/2019/04/rdo-stein-released/ I opened test bug for the providers oVirt is consuming from OpenStack: Neutron, Glance and Cinder. Has anyone capacity for testing this (not on production systems!) and give feedback? Bug 1704350 <https://bugzilla.redhat.com/show_bug.cgi?id=1704350> - Test neutron integration with RDO Stein Bug 1704349 <https://bugzilla.redhat.com/show_bug.cgi?id=1704349> - Test glance integration with RDO Stein Bug 1704352 <https://bugzilla.redhat.com/show_bug.cgi?id=1704352> - Test Cinder integration with RDO Stein Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

ovirt 4.3.3 cannot create VM in non-default cluster
by Strahil Nikolov 29 Apr '19

29 Apr '19

Hi All, I'm having an issue to create a VM in my second cluster called "Intel" which consists of only 1 Host -> ovirt3 which plays the role of a gluster arbiter in my hyperconverged setup. When I try to create the VM (via UI) I receive: "Cannot add VM. CPU Profile doesn't match provided Cluster." When I try to select the host where I can put the VM , I see only ovirt1 or ovirt2 which are part of the 'Default' Cluster . Do we have an opened bug for that ? Note: A workaround is to create the VM in the Default cluster and later edit it to match the needed Cluster. Best Regards,Strahil Nikolov

1 2

4.3.3 restore fails
by magnus＠boden.one 29 Apr '19

29 Apr '19

Hello, I had a ovirt-engine-4.3.0 that I am migrating to a new machine. I have done a backup of that machine but the restore fails on the new machine. Fresh install of centos and the 4.3.3 ovirt-engine. [root@oengine ~]# engine-backup --mode=restore --file=ovirt-engine-backup-20190426214711.backup --log=02.17.log --provision-db --provision-dwh-db --restore-permissions Start of engine-backup with mode 'restore' scope: all archive file: ovirt-engine-backup-20190426214711.backup log file: 02.17.log Preparing to restore: - Unpacking file 'ovirt-engine-backup-20190426214711.backup' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' - user 'ovirt_engine_history', database 'ovirt_engine_history' Restoring: - Engine database 'engine' FATAL: Errors while restoring database engine [root@oengine ~]# cat 02.17.log 2019-04-27 02:17:55 32343: Start of engine-backup mode restore scope all file ovirt-engine-backup-20190426214711.backup 2019-04-27 02:17:55 32343: OUTPUT: Start of engine-backup with mode 'restore' 2019-04-27 02:17:55 32343: OUTPUT: scope: all 2019-04-27 02:17:55 32343: OUTPUT: archive file: ovirt-engine-backup-20190426214711.backup 2019-04-27 02:17:55 32343: OUTPUT: log file: 02.17.log 2019-04-27 02:17:55 32343: Setting scl env for rh-postgresql10 2019-04-27 02:17:55 32343: OUTPUT: Preparing to restore: 2019-04-27 02:17:55 32343: OUTPUT: - Unpacking file 'ovirt-engine-backup-20190426214711.backup' 2019-04-27 02:17:55 32343: Opening tarball ovirt-engine-backup-20190426214711.backup to /tmp/engine-backup.NVv4Bxjb2k 2019-04-27 02:17:55 32343: Verifying hash 2019-04-27 02:17:55 32343: Verifying version 2019-04-27 02:17:55 32343: Reading config 2019-04-27 02:17:55 32343: OUTPUT: Restoring: 2019-04-27 02:17:55 32343: OUTPUT: - Files 2019-04-27 02:17:55 32343: Restoring files 2019-04-27 02:17:56 32343: Reloading configuration 2019-04-27 02:17:56 32343: OUTPUT: Provisioning PostgreSQL users/databases: 2019-04-27 02:17:56 32343: provisionDB: user engine host localhost port 5432 database engine secured False secured_host_validation False 2019-04-27 02:17:56 32343: OUTPUT: - user 'engine', database 'engine' [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/tmp/engine-backup.NVv4Bxjb2k/pg-provision-answer-file'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021756-hxbrea.log Version: otopi-1.8.1 (otopi-1.8.1-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021756-hxbrea.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of provisiondb completed successfully 2019-04-27 02:17:58 32343: provisionDB: user ovirt_engine_history host localhost port 5432 database ovirt_engine_history secured False secured_host_validation False 2019-04-27 02:17:58 32343: OUTPUT: - user 'ovirt_engine_history', database 'ovirt_engine_history' [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/tmp/engine-backup.NVv4Bxjb2k/pg-provision-answer-file'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021758-s2av1b.log Version: otopi-1.8.1 (otopi-1.8.1-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021758-s2av1b.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of provisiondb completed successfully 2019-04-27 02:18:00 32343: OUTPUT: Restoring: 2019-04-27 02:18:00 32343: Generating pgpass 2019-04-27 02:18:00 32343: Verifying connection 2019-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -c select 1 ?column? ---------- 1 (1 row) 2019-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -t -c show lc_messages 2019-04-27 02:18:00 32343: pg_cmd running: pg_dump -w -U engine -h localhost -p 5432 engine -s 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -c select 1 ?column? ---------- 1 (1 row) 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -t -c show lc_messages 2019-04-27 02:18:01 32343: pg_cmd running: pg_dump -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -s 2019-04-27 02:18:01 32343: OUTPUT: - Engine database 'engine' 2019-04-27 02:18:01 32343: Restoring engine database backup at /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db 2019-04-27 02:18:01 32343: restoreDB: backupfile /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db user engine host localhost port 5432 database engine orig_user compressor format custom jobsnum 2 2019-04-27 02:18:01 32343: pg_cmd running: pg_restore -w -U engine -h localhost -p 5432 -d engine -j 2 /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db pg_restore: [archiver (db)] Error while PROCESSING TOC: pg_restore: [archiver (db)] Error from TOC entry 7624; 0 0 COMMENT EXTENSION plpgsql pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension plpgsql Command was: COMMENT ON EXTENSION plpgsql IS 'PL/pgSQL procedural language'; pg_restore: [archiver (db)] Error from TOC entry 7625; 0 0 COMMENT EXTENSION "uuid-ossp" pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension uuid-ossp Command was: COMMENT ON EXTENSION "uuid-ossp" IS 'generate universally unique identifiers (UUIDs)'; pg_restore: [archiver (db)] Error from TOC entry 6400; 2606 18298 CONSTRAINT external_variable pk_external_variable engine pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" DETAIL: Key (var_name)=(fence-kdump-listener-heartbeat) is duplicated. Command was: ALTER TABLE ONLY public.external_variable ADD CONSTRAINT pk_external_variable PRIMARY KEY (var_name); WARNING: errors ignored on restore: 4 2019-04-27 02:18:43 32343: Non-ignored-errors in pg_restore log: pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" 2019-04-27 02:18:43 32343: FATAL: Errors while restoring database engine If this is a problem while restoring a 4.3.0 backup to a 4.3.3 engine is it possible to install the 4.3.0 version? Following the installation part of the release notes of 4.3.0 will result in 4.3.3 being installed. Best Regards Magnus

2 2

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Upgraded ovirt-4.2 to ovirt-4.3 and VM run fails
by Gobinda Das 29 Apr '19

29 Apr '19

Hi, I have upgraded ovirt-4.2 to ovirt-4.3 and after upgrade while starting vms giving me error: Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details: The host *node1.test.com <http://node1.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. The host *node2.test.com <http://node2.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. The host *node3.test.com <http://node3.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. Eventhough cluster is not in maintenance mode. This setup is using gluster6 for storage. -- Thanks, Gobinda

2 1

HA VMs fail to start on host failure
by tezmobile＠googlemail.com 29 Apr '19

29 Apr '19

In a host failure situation, we see that oVirt tries to restart the VMs on other hosts in the cluster but this (more often than not) fails due to kvm being unable to acquire a write lock on the qcow2 image. We see ovirt attempt to restart the VMs several times, each time on different hosts but with the same outcome after which it gives up trying. After this we must log into the oVirt web interface and start the VM manually, which works fine (by this time we assume enough time has passed for the lock to clear itself). This behaviour is experienced with Centos 7.6, Libvirt 4.5.0-10, vdsm 4.30.13-1 Log excerpt from hosted engine: 2019-04-24 17:05:26,653+01 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-82) [] VM 'ef7e04f0-764a-4cfe-96bf-c0862f1f5b83'(vm-21.example.local) moved from 'WaitForLaunch' --> 'Down' 2019-04-24 17:05:26,710+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-82) [] EVENT_ID: VM_DOWN_ERROR(119), VM vm-21.example.local is down with error. Exit message: internal error: process exited while connecting to monitor: 2019-04-24T16:04:48.049352Z qemu-kvm: -drive file=/rhev/data-center/mnt/192.168.111.111:_/21a1390b-b73b-46b1-85b9-2bbf9bba5308/images/c9d96ab6-cb0b-4fba-9b07-096ff750c7f7/16da3660-1afe-40a3-b868-3a74e74bab2f,format=qcow2,if=none,id=drive-ua-c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,serial=c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,werror=stop,rerror=stop,cache=none,aio=threads: 'serial' is deprecated, please use the corresponding option of '-device' instead 2019-04-24T16:04:48.079989Z qemu-kvm: -drive file=/rhev/data-center/mnt/192.168.111.111:_/21a1390b-b73b-46b1-85b9-2bbf9bba5308/images/c9d96ab6-cb0b-4fba-9b07-096ff750c7f7/16da3660-1afe-40a3-b868-3a74e74bab2f,format=qcow2,if=none,id=drive-ua-c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,serial=c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,werror=stop,rerror=stop,cache=none,aio=threads: Failed to get "write" lock So my question is, how can I either force oVirt to continue to try restarting the VM or delay the initial VM restart for enough time to allow locks to clear?

1 0

Template Disk Corruption
by Alex McWhirter 29 Apr '19

29 Apr '19

1. Create server template from server VM (so it's a full copy of the disk) 2. From template create a VM, override server to desktop, so that it become a qcow2 overlay to the template raw disk. 3. Boot VM 4. Shutdown VM 5. Delete VM Template disk is now corrupt, any new machines made from it will not boot. I can't see why this happens as the desktop optimized VM should have just been an overlay qcow file...

2 5

oVirt 4.3.2 Error: genev_sys_6081 is not present in the system
by Dee Slaw 29 Apr '19

29 Apr '19

Hello, I've installed oVirt 4.3.2 and the problem is that it log messages: VDSM ovirt-04 command Get Host Statistics failed: Internal JSON-RPC error: {'reason': '[Errno 19] genev_sys_6081 is not present in the system'} in Open Virtualization Manager. It also keeps on logging in /var/log/messages: Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9861] device (genev_sys_6081): carrier: link connected Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9864] manager: (genev_sys_6081): new Generic device (/org/freedesktop/NetworkManager/Devices/34160) Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9866] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9906] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:03 ovirt-04 kernel: device genev_sys_6081 left promiscuous mode Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 entered promiscuous mode Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0038] device (genev_sys_6081): carrier: link connected Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0042] manager: (genev_sys_6081): new Generic device (/org/freedesktop/NetworkManager/Devices/34161) Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0044] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0082] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 left promiscuous mode Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 entered promiscuous mode Also I can see the following in /var/log/openvswitch: 2019-03-22T08:53:12.413Z|131047|bridge|WARN|could not add network device ovn-034a1c-0 to ofproto (File exists) 2019-03-22T08:53:12.431Z|131048|tunnel|WARN|ovn-a21088-0: attempting to add tunnel port with same config as port 'ovn-0836d7-0' (::->192.168.10.24, key=flow, legacy_l2, dp port=2) 2019-03-22T08:53:12.466Z|131055|connmgr|WARN|accept failed (Too many open files) 2019-03-22T08:53:12.466Z|131056|unixctl|WARN|punix:/var/run/openvswitch/ovs-vswitchd.9103.ctl: accept failed: Too many open files In ovsdb-server.log: 2019-03-22T03:24:12.583Z|05792|jsonrpc|WARN|unix#28684: receive error: Connection reset by peer 2019-03-22T03:24:12.583Z|05793|reconnect|WARN|unix#28684: connection dropped (Connection reset by peer) How to fix this issue with geneve tunnels?

4 11

Re: All Windows vms report "Actual timezone in guest doesn't match configuration"
by Strahil 29 Apr '19

29 Apr '19

What happens when you restart ovirt agent services ? Best Regards, Strqhil NikolovOn Apr 26, 2019 03:06, michael(a)wanderingmad.com wrote: > > All of my windows VMs have a yellow exclamation point with the timezone error. The configuration in ovirt says eastern time, and I've tried changing the VM from eastern time to US eastern time, and error does not go away. This is with the latest ovirt guest tools for windows. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XL6XHN5KIEM7G…

2 1

Fetching DiskAttachmentService in ovirt-python-sdk-4
by Kaustav Majumder 29 Apr '19

29 Apr '19

Hi, I am trying to detach and delete disk from my vm. I found this service in the docs DiskAttachmentService http://ovirt.github.io/ovirt-engine-sdk/master/services.m.html#ovirtsdk4.se… I am not able to fetch this service. Below if the snippet of code I am trying. https://pastebin.com/UUu0Pfc8 Error--> File "./pre_setup/delete_vm_disk.py", line 19, in remove_attached_vm_disk attachment.remove(detach_only=False) AttributeError: 'DiskAttachment' object has no attribute 'remove' -- Thanks, Kaustav Majumder

3 4

One Way Flights Deals - Tripiflights
by marketings＠tripiflights.com 29 Apr '19

29 Apr '19

searching for one way flights deals . tripiflights is the perfect place for you. Here you will get best options at reasonable rates - https://go2article.com/article/one-way-flights-deals-tripiflights/

1 0

unable to upload disk images after upgrade to 4.3.3 -- ticket failures
by Edward Berger 29 Apr '19

29 Apr '19

Previously I had issues with the upgrades to 4.3.3 failing because of "stale" image transfer data, so I removed it from the database using the info given here on the mailing list and was able to complete the oVirt node and engine upgrades. Now I have a new problem. I can't upload a disk image anymore, which used to work. "test connection" returns success. In the dashboard Storage/Disks view, it starts and then stops with "paused by system" I tried pointing it at another node, same problem. I tried restarting services ovirt-imageio-proxy on engine and ovirt-imageio-daemon on the node, same failure. in the dashboard events when trying to upload disk I get this error Transfer was stopped by system. Reason: failed to add image ticket to ovirt-imageio-proxy. or when trying to resume transfer "paused by system" giving it the local path again. Transfer was stopped by system. Reason: failure in transfer image ticket renewal. I'm not sure what logs I should be looking deeper into.. Here's what the database says engine=# select * from image_transfers; -[ RECORD 1 ]-------------+------------------------------------- command_id | 59dce2b1-f8ba-44dd-9df9-c6e39773a3f9 command_type | 1024 phase | 4 last_updated | 2019-04-23 12:22:25.098-04 message | Uploading from byte 0 vds_id | disk_id | 6693d5ac-d3eb-43d7-9abe-97c5197efc23 imaged_ticket_id | proxy_uri | signed_ticket | bytes_sent | 0 bytes_total | 1996488704 type | 2 active | f daemon_uri | client_inactivity_timeout | 60 -[ RECORD 2 ]-------------+------------------------------------- command_id | 16898219-be5b-4826-8f20-3355fa47272a command_type | 1024 phase | 4 last_updated | 2019-04-23 16:15:34.591-04 message | Uploading from byte 0 vds_id | disk_id | 3b8e3053-bfe4-49d3-abd2-5452b1674400 imaged_ticket_id | proxy_uri | signed_ticket | bytes_sent | 0 bytes_total | 1998585856 type | 2 active | f daemon_uri | client_inactivity_timeout | 60 I really need the image uploading to work. Any suggestions on what to do next?

2 2

removal of vdsm-hook-macspoof
by Dan Kenigsberg 28 Apr '19

28 Apr '19

vdsm-hook-macspoof was created to let VM owners override the vdsm-no-mac-spoofing that was once hard-coded on each vNIC. Since ovirt-4.0's Bug 1317441 - [RFE] Allow MAC Anti-Spoofing per interface instead of globally the hook is no longer needed, because ovirt-engine supports selection of filters, including the "Empty" one. Thus, we can finally drop vdsm-hook-macspoof from vdsm code. https://gerrit.ovirt.org/#/c/94613/ does that. If someone still depends on setting the ifacemacspoof custom property, they can find and fix the vnic profiles using a script similar to the following one. Note that ovirtlib does not yet have an easy-to-pull canonical location. from __future__ import print_function import sys from ovirtlib.system import SDKSystemRoot from ovirtlib.netlib import Network, VnicProfile, CustomProperty, NetworkFilter from ovirtlib.datacenterlib import DataCenter system = SDKSystemRoot() system.connect(url=URL, insecure=True, password=PASSWORD, username=USER) spoof_cp = CustomProperty(name='ifacemacspoof', value='true') broken_profiles = [ profile for profile in VnicProfile.iterate(system) if spoof_cp in profile.custom_properties and profile.filter and profile.filter.name == 'vdsm-no-mac-spoofing'] if broken_profiles: if '--modify' in sys.argv: print('clearing vdsm-no-mac-spoof filter from profiles:') for profiles in broken_profiles: print(profile.name) profile.filter = None else: print('''ifacemacspoof custom property is no longer supported by vdsm. vnic profiles that depended on it for connectivity, e.g they serve VMs with in-guest bonds or vlans, must use an empty network filter instead. profiles with ifacemacspoof and vdsm-no-mac-spoof filter:''') for profiles in broken_profiles: print(profile.name) print('run again with --modify to remove the filter') else: print('no profile with ifacemacspoof and vdsm-no-mac-spoof was found.')

1 0

Resuming VM from suspend that is based on iscsi/fc raise an exception.
by 王猛 28 Apr '19

28 Apr '19

Hi, When I resume a VM from suspend that is based on iscsi or fcp, there's always an exception: ----- 2019-04-17 19:33:58,835+0800 ERROR (vm/baaabf11) [virt.vm] (vmId='baaabf11-172d-4fac-9862-86ff05feb085') The vm start process failed (vm:937) 378 Traceback (most recent call last): 379 File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in _startUnderlyingVm 380 self._run() 381 File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2819, in _run 382 self._connection.restore(fname) 383 File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper 384 ret = f(*args, **kwargs) 385 File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 94, in wrapper 386 return func(inst, *args, **kwargs) 387 File "/usr/lib64/python2.7/site-packages/libvirt.py", line 4513, in restore 388 if ret == -1: raise libvirtError ('virDomainRestore() failed', conn=self) 389 libvirtError: internal error: Child process (gzip -dc) unexpected exit status 2: 390 gzip: stdin: decompression OK, trailing garbage ignored 391 392 2019-04-17 19:33:58,835+0800 INFO (vm/baaabf11) [virt.vm] (vmId='baaabf11-172d-4fac-9862-86ff05feb085') Changed state to Down: internal error: Child process (gzip -dc) unexpected exit status 2: 393 gzip: stdin: decompression OK, trailing garbage ignored 394 (code=1) (vm:1675) ---------- After i read the Bug 1503468 (https://bugzilla.redhat.com/show_bug.cgi?id=1503468#c40) I know the reason why that happened. But how should I avoid this exception? The only method i know and tested is to change gzip to lzop in /etc/libvirt/qemu.conf. But this is not the way to solve the problem. -- 王猛软件研发手机：13021702660 地址：济南市高新区银荷大厦B座10层 250101 邮箱: wang_meng(a)massclouds.com 网址: www.massclouds.com 山东乾云启创信息科技有限公司

1 0

Re: Arbiter brick disk performance
by Strahil 28 Apr '19

28 Apr '19

I think 2 small ssds (raid 1 mdadm) can do the job better as ssds have lower latencies .You can use them both for OS (minimum needed is 60 GB) and the rest will be plenty for an arbiter. By the way, if you plan using gluster snapshots - use thin LVM for the brick. Best Regards, Strahil NikolovOn Apr 24, 2019 16:20, Leo David <leoalex(a)gmail.com> wrote: > > Hello Everyone, > I need to look into adding some enterprise grade sas disks ( both ssd and spinning ), and since the prices are not too low, I would like to benefit of replica 3 arbitrated. > Therefore, I intend to buy some smaller disks for use them as arbiter brick. > My question is, what performance ( regarding iops, througput ) the arbiter disks need to be. Should they be at least the same as the real data disks ? > Knowing that they only keep metadata, I am thinking that will not be so much pressure on the arbiters. > Any thoughts? > > Thank you ! > > > -- > Best regards, Leo David

3 3

Uncaught exception when open Host "Edit" window
by Vrgotic, Marko 27 Apr '19

27 Apr '19

Dear oVIrt, Short platform summary: * 5 Hosts * 3/5 in Shared DC/Cluster with NetApp NFS storage * 1/5 with Local Storage * 1/5 with Local Storage * oVirt version 4.3.2 , recently upgraded from 4.2.8 Each time I click on “Edit” from Hosts View, for each Host: following error is shown in ui.log: 2019-04-23 10:39:09,064Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-241) [] Permutation name: 0D2DB7A91B469CC36C64386E5632FAC5 2019-04-23 10:39:09,064Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-241) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (TypeError) : oab(...) is null at org.ovirt.engine.ui.webadmin.section.main.view.popup.host.HostPopupView.$lambda$0(HostPopupView.java:693) at org.ovirt.engine.ui.webadmin.section.main.view.popup.host.HostPopupView$lambda$0$Type.eventRaised(HostPopupView.java:693) at org.ovirt.engine.ui.uicompat.Event.$raise(Event.java:99) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$setSelectedItem(ListModel.java:82) at org.ovirt.engine.ui.uicommonweb.models.ListModel.setSelectedItem(ListModel.java:78) at org.ovirt.engine.ui.uicommonweb.models.ListModel.itemsChanged(ListModel.java:236) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$itemsChanged(ListModel.java:224) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$setItems(ListModel.java:102) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel.$updateClusterList(HostModel.java:1037) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel.$lambda$13(HostModel.java:1017) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel$lambda$13$Type.onSuccess(HostModel.java:1017) at org.ovirt.engine.ui.frontend.Frontend$1.$onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.Frontend$1.onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.$onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.$onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.onResponseReceived(RequestCallbackAdapter.java:198) [gwt-servlet.jar:] at com.google.gwt.http.client.Request.$fireOnResponseReceived(Request.java:233) [gwt-servlet.jar:] at com.google.gwt.http.client.RequestBuilder$1.onReadyStateChange(RequestBuilder.java:409) [gwt-servlet.jar:] at Unknown.onreadystatechange<(https://ovirt-staging-engine.avinity.tv/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.Su/<(https://ovirt-staging-engine.avinity.tv/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at Unknown.anonymous(Unknown) Screenshot of what is shown on UI: [cid:image001.png@01D4F9D2.637FDF40] Please assist. Kindly awaiting your reply. Marko Vrgotic

1 1

NVME-oF
by Daniel Menzel 26 Apr '19

26 Apr '19

Hi guys, just out of curiosity: Have there been any attempts yet to use NVMe over Fabrics as Storage-Backend in oVirt? We have used NVMe-oF several times in the past few weeks/month and its an absolutely gorgeous technology - and more than perfect for virtualization. Best Daniel -- Daniel Menzel Geschäftsführer Menzel IT GmbH Charlottenburger Str. 33a 13086 Berlin +49 (0) 30 / 5130 444 - 00 daniel.menzel(a)menzel-it.net https://menzel-it.net Geschäftsführer: Daniel Menzel Unternehmenssitz: Berlin Handelsregister: Amtsgericht Charlottenburg Handelsregister-Nummer: HRB 149835 B USt-ID: DE 309 226 751

1 0

Re: Ovirt 4.3.2 VM Failover
by Strahil 26 Apr '19

26 Apr '19

I have noticed after full power failiure (all nodes simultaneously - labs don't have UPS yet) one of my VMs was in that state, and I had to restart VDSM in order the engine to notice the crash. Definitely , there is something phishy here... I guess Sahina & Sandro can take a look in your case.. Best Regards, Strahil NikolovOn Apr 26, 2019 02:56, michael(a)wanderingmad.com wrote: > > Is there something in the 4.3.x series that has changed when it comes to VM failover? I have the cluster configurated to automatically migrate all server VMs, but whenever One of the nodes goes down, all the VMs that were on that host switch to a ? status and I have to go and click "host has been rebooted" to have them failed over. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ABOBHQGF2U6JC…

1 0

Ovirt 4.3.2 VM Failover
by michael＠wanderingmad.com 26 Apr '19

26 Apr '19

Is there something in the 4.3.x series that has changed when it comes to VM failover? I have the cluster configurated to automatically migrate all server VMs, but whenever One of the nodes goes down, all the VMs that were on that host switch to a ? status and I have to go and click "host has been rebooted" to have them failed over.

2 1

All Windows vms report "Actual timezone in guest doesn't match configuration"
by michael＠wanderingmad.com 25 Apr '19

25 Apr '19

All of my windows VMs have a yellow exclamation point with the timezone error. The configuration in ovirt says eastern time, and I've tried changing the VM from eastern time to US eastern time, and error does not go away. This is with the latest ovirt guest tools for windows.

1 0

Adding network to VM - What stupid thing have I missed?
by eshwayri＠gmail.com 25 Apr '19

25 Apr '19

When creating a new VM, it looks like I connect it's nic(s) under the "Instantiate VM network interfaces by picking a vNIC profile." setting. The problem I am seeing is that the drop down only has "Empty" and "br-kvm-prod" (my production bridge). I should have two more. Under Networks and vNIC Profiles tabs, I also have a br-kvm-stor and kvm_heart-22 defined which don't appear in that list. Am I missing something I need to do for these additional profiles to also appear in the drop-down? Some of my VMs will need access to the other physical networks.

3 3

New disk creation very slow after upgrade to 4.3.3
by Steffen Luitz 25 Apr '19

25 Apr '19

This is on a 3-node hyperconverged environment with glusterfs. After upgrading to oVirt 4.3.3 (from 4.3.2) creating a new disk takes very long (hours for a 100GByte disk, making it essentially impossible to create a new disk image). In the UI the default is "preallocated" but changing it to thin provision does not make any difference. Regardless of this setting, an fallocate process gets started on the SDM host: /usr/bin/python2 /usr/libexec/vdsm/fallocate 107374182400 /rhev/data-center/mnt/glusterSD/s-vmhost2-ovir.t... Using fallocate to create a file directly on the underlying file system is fast. Using it to create a file through the glusterfs fuse mount is very slow. Thanks for any insights. Steffen

3 2

Upgrade from 4.3.2 to 4.3.3 fails on database schema update
by eshwayri＠gmail.com 24 Apr '19

24 Apr '19

Tried to upgrade to 4.3.3, and during engine-setup I get: 2019-04-20 14:24:47,041-0400 Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql'... 2019-04-20 14:24:47,043-0400 dbfunc_psql_die --file=/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql ********* QUERY ********** SELECT fn_db_create_constraint('image_transfers', 'fk_image_transfers_command_enitites', 'FOREIGN KEY (command_id) REFERENCES command_entities(command_id) ON DELETE CASCADE'); ************************** 2019-04-20 14:24:47,060-0400 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.executeRaw:863 execute-result: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20190420142153-s5heq0.log', '-c', 'apply'], rc=1 2019-04-20 14:24:47,060-0400 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:921 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20190420142153-s5heq0.log', '-c', 'apply'] stdout: 2019-04-20 14:24:47,061-0400 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:926 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20190420142153-s5heq0.log', '-c', 'apply'] stderr: psql:/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql:3: ERROR: insert or update on table "image_transfers" violates foreign key constraint "fk_image_transfers_command_enitites" DETAIL: Key (command_id)=(7d68555a-71ee-41f5-9f12-0b26b6b9d449) is not present in table "command_entities". CONTEXT: SQL statement "ALTER TABLE image_transfers ADD CONSTRAINT fk_image_transfers_command_enitites FOREIGN KEY (command_id) REFERENCES command_entities(command_id) ON DELETE CASCADE" PL/pgSQL function fn_db_create_constraint(character varying,character varying,text) line 9 at EXECUTE FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql 2019-04-20 14:24:47,061-0400 ERROR otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema schema._misc:432 schema.sh: FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql 2019-04-20 14:24:47,061-0400 DEBUG otopi.context context._executeMethod:145 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/schema.py", line 434, in _misc raise RuntimeError(_('Engine schema refresh failed')) RuntimeError: Engine schema refresh failed 2019-04-20 14:24:47,064-0400 ERROR otopi.context context._executeMethod:154 Failed to execute stage 'Misc configuration': Engine schema refresh failed 2019-04-20 14:24:47,065-0400 DEBUG otopi.transaction transaction.abort:119 aborting 'Yum Transaction' 2019-04-20 14:24:47,065-0400 INFO otopi.plugins.otopi.packagers.yumpackager yumpackager.info:80 Yum Performing yum transaction rollback

2 2

Re: Upgrading from 4.2.8 to 4.3.3 broke Node NG GlusterFS
by Strahil 24 Apr '19

24 Apr '19

Fix those disconnectes node and run find against a node that has successfully mounted the volume. Best Regards, Strahil NikolovOn Apr 24, 2019 15:31, Andreas Elvers <andreas.elvers+ovirtforum(a)solutions.work> wrote: > > The file handle is stale so find will display: > > "find: '/rhev/data-center/mnt/glusterSD/node01.infra.solutions.work:_vmstore': Transport endpoint is not connected" > > "stat /rhev/data-center/mnt/glusterSD/node01.infra.solutions.work:_vmstore" will output > stat: cannot stat '/rhev/data-center/mnt/glusterSD/node01.infra.solutions.work:_vmstore': Transport endpoint is not connected > > All Nodes are peering with the other nodes: > ----- > Saiph:~ andreas$ ssh node01 gluster peer status > Number of Peers: 2 > > Hostname: node02.infra.solutions.work > Uuid: 87fab40a-2395-41ce-857d-0b846e078cdb > State: Peer in Cluster (Connected) > > Hostname: node03.infra.solutions.work > Uuid: 49025f81-e7c1-4760-be03-f36e0f403d26 > State: Peer in Cluster (Connected) > ---- > Saiph:~ andreas$ ssh node02 gluster peer status > Number of Peers: 2 > > Hostname: node03.infra.solutions.work > Uuid: 49025f81-e7c1-4760-be03-f36e0f403d26 > State: Peer in Cluster (Disconnected) > > Hostname: node01.infra.solutions.work > Uuid: f25e6bff-e5e2-465f-a33e-9148bef94633 > State: Peer in Cluster (Connected) > ---- > ssh node03 gluster peer status > Number of Peers: 2 > > Hostname: node02.infra.solutions.work > Uuid: 87fab40a-2395-41ce-857d-0b846e078cdb > State: Peer in Cluster (Connected) > > Hostname: node01.infra.solutions.work > Uuid: f25e6bff-e5e2-465f-a33e-9148bef94633 > State: Peer in Cluster (Connected) > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DI6AWTLIQIPWN…

2 1

error while setup
by W3SERVICES 24 Apr '19

24 Apr '19

PLAY [gluster_servers] ********************************************************* TASK [Run a shell script] ****************************************************** changed: [localhost.localdomain] => (item=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h localhost.localdomain) PLAY RECAP ********************************************************************* localhost.localdomain : ok=1 changed=1 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [Enable or disable services] ********************************************** ok: [localhost.localdomain] => (item=chronyd) PLAY RECAP ********************************************************************* localhost.localdomain : ok=1 changed=0 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [start/stop/restart/reload services] ************************************** changed: [localhost.localdomain] => (item=chronyd) PLAY RECAP ********************************************************************* localhost.localdomain : ok=1 changed=1 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [Run a command in the shell] ********************************************** changed: [localhost.localdomain] => (item=vdsm-tool configure --force) PLAY RECAP ********************************************************************* localhost.localdomain : ok=1 changed=1 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [Run a shell script] ****************************************************** changed: [localhost.localdomain] => (item=/usr/share/gdeploy/scripts/blacklist_all_disks.sh) PLAY RECAP ********************************************************************* localhost.localdomain : ok=1 changed=1 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [Clean up filesystem signature] ******************************************* skipping: [localhost.localdomain] => (item=/dev/sdb) TASK [Create Physical Volume] ************************************************** failed: [localhost.localdomain] (item=/dev/sdb) => {"changed": false, "failed_when_result": true, "item": "/dev/sdb", "msg": " Device /dev/sdb not found.\n", "rc": 5} to retry, use: --limit @/tmp/tmpQtig6r/pvcreate.retry PLAY RECAP ********************************************************************* localhost.localdomain : ok=0 changed=0 unreachable=0 failed=1 From *Sunil Kumar | 09967222267Tech Head and Cloud Solution Architect* *-----------------------------------------------------------------------* *Website : * *https://w3services.net <https://www.w3services.net/>* https://w3services.com (Tech Consultancy) Office Tel. +91 09300670068 | Write A Google Review ( Help Us ) <https://goo.gl/tKGa79> *-----------------------------------------------------------------------*

1 0

[ANN] oVirt 4.3.3 second async update is now available
by Sandro Bonazzola 24 Apr '19

24 Apr '19

The oVirt Team has just released a new version of the following packages: - ovirt-engine-4.3.3.6 The async release addresses the following bugs: - Bug 1701205 <https://bugzilla.redhat.com/show_bug.cgi?id=1701205> - Creating a new VM over the not defaulted cluster fails with "CPU Profile doesn't match provided Cluster" error. - Bug 1700759 <https://bugzilla.redhat.com/show_bug.cgi?id=1700759> - engine failed schema refresh v4.3.2 -> v4.3.3 Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Arbiter brick disk performance
by Leo David 24 Apr '19

24 Apr '19

Hello Everyone, I need to look into adding some enterprise grade sas disks ( both ssd and spinning ), and since the prices are not too low, I would like to benefit of replica 3 arbitrated. Therefore, I intend to buy some smaller disks for use them as arbiter brick. My question is, what performance ( regarding iops, througput ) the arbiter disks need to be. Should they be at least the same as the real data disks ? Knowing that they only keep metadata, I am thinking that will not be so much pressure on the arbiters. Any thoughts? Thank you ! -- Best regards, Leo David

1 0

Upgrading from 4.2.8 to 4.3.3 broke Node NG GlusterFS
by Andreas Elvers 24 Apr '19

24 Apr '19

Hi, I am currently upgrading my oVirt setup from 4.2.8 to 4.3.3.1. The setup consists of: Datacenter/Cluster Default: [fully upgraded to 4.3.3.1] 2 nodes (node04,node05)- NFS storage domain with self hosted engine Datacenter Luise: Cluster1: 3 nodes (node01,node02,node03) - Node NG with GlusterFS - Ceph Cinder storage domain [Node1 and Node3 are upgraded to 4.3.3.1, Node2 is on 4.2.8] Cluster2: 1 node (node06) - only Ceph Cinder storage domain [fully upgraded to 4.3.3.1] Problems started when upgrading Luise/Cluster1 with GlusterFS: (I always waited for GlusterFS to be fully synced before proceeding to the next step) - Upgrade node01 to 4.3.3 -> OK - Upgrade node03 to 4.3.3.1 -> OK - Upgrade node01 to 4.3.3.1 -> GlusterFS became unstable. I now get the error message: VDSM node03.infra.solutions.work command ConnectStoragePoolVDS failed: Cannot find master domain: u'spUUID=f3218bf7-6158-4b2b-b272-51cdc3280376, msdUUID=02a32017-cbe6-4407-b825-4e558b784157' And on node03 there is a problem with Gluster: node03#: ls -l /rhev/data-center/mnt/glusterSD/node01.infra.solutions.work:_vmstore ls: cannot access /rhev/data-center/mnt/glusterSD/node01.infra.solutions.work:_vmstore: Transport endpoint is not connected The directory is available on node01 and node02. The engine is reporting the brick on node03 as down. Node03 and Node06 are shown as NonOperational, because they are not able to access the gluster storage domain. A “gluster peer status” on node1, node2, and node3 shows all peers connected. “gluster volume heal vmstore info” shows for all nodes: gluster volume heal vmstore info Brick node01.infra.solutions.work:/gluster_bricks/vmstore/vmstore Status: Transport endpoint is not connected Number of entries: - Brick node02.infra.solutions.work:/gluster_bricks/vmstore/vmstore <gfid:0bcb7825-e649-4178-a899-c5cc04c95286> <gfid:71ec8035-f5a5-4e61-bb34-5ad9db28c0eb> <gfid:16d5961e-c3bb-4493-a51d-bf83074c4cc7> /02a32017-cbe6-4407-b825-4e558b784157/dom_md/ids /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.66 <gfid:5fe350e4-1eb5-4b6f-a3fb-42c98b7b2f8d> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.60 /02a32017-cbe6-4407-b825-4e558b784157/images/a3a10398-9698-4b73-84d9-9735448e3534/6161e310-4ad6-42d9-8117-5a89c5b2b4b6 <gfid:8eb9fd30-fdb9-442b-9c54-8ba256d7981b> <gfid:c72001be-e7d3-4b34-bac5-9ab50b609eea> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.96 <gfid:447ec09b-336e-4d2b-8338-f31329ee7a55> <gfid:9d7db516-d6fb-43d8-a069-dcbc1d72e62a> /.shard/d66880de-3fa1-4362-8c43-574a173c5f7d.133 <gfid:2412d449-d3ed-40ef-b7eb-d81bdf7c5c05> <gfid:0fae358b-2cdd-4064-b63c-7f31a35bc35a> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.38 /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.67 /__DIRECT_IO_TEST__ <gfid:a7945526-9ff3-40fe-b1e2-3921117ef738> <gfid:e78e9c1f-ce6b-4871-b5bf-9bde34685b99> /02a32017-cbe6-4407-b825-4e558b784157/images/493188b2-c137-4440-99ee-43a753842a7d/9aa2d139-e3bd-406b-8fe0-b189123eaa73 <gfid:3aed3fb6-044a-4371-9302-e0bd54cbd794> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.64 /.shard/d66880de-3fa1-4362-8c43-574a173c5f7d.132 <gfid:f7631be7-2ab5-4985-904d-69174c0e1267> <gfid:43001625-1aad-4032-a76e-4cc2a51de2b3> <gfid:6ae3fe7f-15c9-4103-960c-faba0ba59cb3> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.44 /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.9 /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.69 <gfid:f20cc6f7-9391-4260-9238-3e1d0cabbfa3> /02a32017-cbe6-4407-b825-4e558b784157/images/12e647fb-20aa-4957-b659-05fa75a9215e/f7e4b2a3-ab84-4eb5-a4e7-7208ddad8156 <gfid:c540368a-4431-4405-9a59-e11a217d0ea6> <gfid:4e698a74-39dc-40a3-ac9c-14456420ab66> <gfid:afd48e71-ff23-42d7-aef4-b2e2167b75e8> <gfid:194589b3-0760-4150-80ef-d87376813835> <gfid:6e17ead1-88cc-4e3e-84fa-7495c4fc3a0e> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.35 /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.32 <gfid:982d071f-2081-4371-b007-bc48d8167e7c> <gfid:e2285905-a8da-44f5-8c56-1f8a4d6326a8> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.39 <gfid:956c7d9c-2f96-42d1-bf6e-57bc9e534f84> <gfid:16162bc7-201a-4842-a41a-af2cc4fb8a9e> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.34 /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.68 Status: Connected Number of entries: 47 Brick node03.infra.solutions.work:/gluster_bricks/vmstore/vmstore /02a32017-cbe6-4407-b825-4e558b784157/images/12e647fb-20aa-4957-b659-05fa75a9215e/f7e4b2a3-ab84-4eb5-a4e7-7208ddad8156 <gfid:c540368a-4431-4405-9a59-e11a217d0ea6> <gfid:4e698a74-39dc-40a3-ac9c-14456420ab66> <gfid:afd48e71-ff23-42d7-aef4-b2e2167b75e8> <gfid:194589b3-0760-4150-80ef-d87376813835> <gfid:6e17ead1-88cc-4e3e-84fa-7495c4fc3a0e> <gfid:099284a6-9538-4f9a-928a-d9b704fe0735> <gfid:75d3c8f7-d67a-49a4-9cd4-7fff202df40d> <gfid:982d071f-2081-4371-b007-bc48d8167e7c> <gfid:e2285905-a8da-44f5-8c56-1f8a4d6326a8> <gfid:447ec09b-336e-4d2b-8338-f31329ee7a55> <gfid:956c7d9c-2f96-42d1-bf6e-57bc9e534f84> /.shard/d66880de-3fa1-4362-8c43-574a173c5f7d.133 <gfid:43001625-1aad-4032-a76e-4cc2a51de2b3> <gfid:6ae3fe7f-15c9-4103-960c-faba0ba59cb3> <gfid:1a0b2737-9172-4c51-aa77-e93e9671840c> <gfid:eb471e13-6749-4f62-b1f5-15a44f8990c2> <gfid:a7945526-9ff3-40fe-b1e2-3921117ef738> <gfid:e78e9c1f-ce6b-4871-b5bf-9bde34685b99> /02a32017-cbe6-4407-b825-4e558b784157/images/493188b2-c137-4440-99ee-43a753842a7d/9aa2d139-e3bd-406b-8fe0-b189123eaa73 <gfid:6b418e80-9f61-4d6e-ba77-8a1969d9a99b> <gfid:914c72d2-e45e-48f2-b7ef-5846b13f7a91> <gfid:2bd28bdb-1dc6-41d5-96be-c696f452e3f2> <gfid:9d7db516-d6fb-43d8-a069-dcbc1d72e62a> <gfid:f7631be7-2ab5-4985-904d-69174c0e1267> <gfid:16162bc7-201a-4842-a41a-af2cc4fb8a9e> /.shard/40948f85-2212-47f9-bd5e-102a8dd632b8.44 <gfid:afc6d611-528d-441b-b74e-c5fae6672088> <gfid:707308e9-e8e5-487a-b0f1-a816720c4243> <gfid:5f1a81a7-7c42-4226-9142-1b5b35c2b1e9> <gfid:f20cc6f7-9391-4260-9238-3e1d0cabbfa3> <gfid:0bcb7825-e649-4178-a899-c5cc04c95286> <gfid:71ec8035-f5a5-4e61-bb34-5ad9db28c0eb> <gfid:16d5961e-c3bb-4493-a51d-bf83074c4cc7> /02a32017-cbe6-4407-b825-4e558b784157/dom_md/ids <gfid:7661180b-1917-4a7b-9749-5dfb826c4449> <gfid:5fe350e4-1eb5-4b6f-a3fb-42c98b7b2f8d> <gfid:a6197593-7e09-4d3f-b538-9cd1ebadd6c9> /02a32017-cbe6-4407-b825-4e558b784157/images/a3a10398-9698-4b73-84d9-9735448e3534/6161e310-4ad6-42d9-8117-5a89c5b2b4b6 <gfid:8eb9fd30-fdb9-442b-9c54-8ba256d7981b> <gfid:c72001be-e7d3-4b34-bac5-9ab50b609eea> <gfid:3aed3fb6-044a-4371-9302-e0bd54cbd794> /.shard/d66880de-3fa1-4362-8c43-574a173c5f7d.132 <gfid:2412d449-d3ed-40ef-b7eb-d81bdf7c5c05> <gfid:0fae358b-2cdd-4064-b63c-7f31a35bc35a> <gfid:c0ca2784-a8af-44b3-9091-a1eaf4c8676f> /__DIRECT_IO_TEST__ Status: Connected Number of entries: 47 On Node03 there are several self healing processes, that seem to be doing nothing. Oh well.. What now? Best regards, - Andreas

2 4

Unable to use MAC address starting with reserved value 0xFE
by Ricardo Alonso 24 Apr '19

24 Apr '19

Is there a way to use a mac starting with FE? The machine has a license requirement attached to the mac address, and when I try to start it, it fails with the message: VM is down with error. Exit message: unsupported configuration: Unable to use MAC address starting with reserved value 0xFE - 'fe:XX:XX:XX:XX:XX'

1 0

Upgrade Initiation fails without obvious reason
by Vrgotic, Marko 24 Apr '19

24 Apr '19

Dear oVIrt, Short platform summary: * 5 Hosts * 3/5 in Shared DC/Cluster with NetApp NFS storage * 1/5 with Local Storage * 1/5 with Local Storage * oVirt version 4.3.2 , recently upgraded from 4.2.8 Host related: ovirt-staging-hv-04 Host is moved to Maintenance. Selected Upgrade, following log lines are written: 2019-04-23 10:58:32,639Z INFO [org.ovirt.engine.core.bll.hostdeploy.UpgradeHostCommand] (default task-247) [11381573-01c0-4e48-8634-c577988a8f79] Running command: UpgradeHostCommand internal: false. Entities affected : ID: 9462386e-74d1-4000-96b0-0e081ec7d069 Type: VDSAction group EDIT_HOST_CONFIGURATION with role type ADMIN 2019-04-23 10:58:32,648Z INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-247) [11381573-01c0-4e48-8634-c577988a8f79] EVENT_ID: HOST_UPGRADE_STARTED(840), Host ovirt-staging-hv-04 upgrade was started (User: mvrgotic@ictv.com@ictv.com-authz<mailto:mvrgotic@ictv.com@ictv.com-authz>). However, the host is still in Maintenance mode, expected is Installing: [cid:image001.png@01D4F9D5.35D3A4C0] Tail YUM logs also shows the procedure did not start and packages are not being updated. Kindly awaiting you reply. Marko Vrgotic

3 2

Prevent 2 different VMs from running on the same host
by Paulo Silva 24 Apr '19

24 Apr '19

Hi, I have a cluster of 6 hosts using ovirt 4.3 and I want to make sure that 2 VMs are always started on different hosts. Is it possible to prevent 2 different VMs from running on the same physical host without specifying manually a different set of hosts where each VM can start running? Thanks -- Paulo Silva <paulojjs(a)gmail.com>

2 1

Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster
by adrianquintero＠gmail.com 24 Apr '19

24 Apr '19

Hello, I have a 3 node Hyperconverged setup with gluster and added 3 new nodes to the cluster for a total of 6 servers. I am now taking advantage of more compute power but cant scale out my storage volumes. Current Hyperconverged setup: - host1.mydomain.com ---> Bricks: engine data1 vmstore1 - host2.mydomain.com ---> Bricks: engine data1 vmstore1 - host3.mydomain.com ---> Bricks: engine data1 vmstore1 From these 3 servers we get the following Volumes: - engine(host1:engine, host2:engine, host3:engine) - data1 (host1:data1, host2:data1, host3:data1) - vmstore1 (host1:vmstore1, host2:vmstore1, host3:vmstore11) The following are the newly added servers to the cluster, however as you can see there are no gluster bricks - host4.mydomain.com - host5.mydomain.com - host6.mydomain.com I know that the bricks must be added in sets of 3 and per the first 3 hosts that is how it was deployed thru the web UI. Questions: -how can i extend the gluster volumes engine, data1 and vmstore using host4, host5 and host6? -Do I need to configure gluster volumes manually through the OS CLI in order for them to span amongst all 6 servers? -If I configure the fail storage scenario manually will oVirt know about it?, will it still be hyperconverged? I have only seen 3 host hyperconverged setup examples with gluster, but have not found examples for 6, 9 or 12 host cluster with gluster. I know it might be a lack of understanding from my end on how ovirt and gluster integrate with one another. If you can point me in the right direction would be great. thanks,

4 6