Install fresh 4.3 fails with mounting shared storage
by Vrgotic, Marko
Dear oVIrt,
We are trying to deploy new setup with Hosted-Engine , oVirt version 4.3.
Volume is on the Netapp, protocol NFS v4.
Upon populating shared storage information and path:
Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: nfs
Please specify the nfs version you would like to use (auto, v3, v4, v4_1)[auto]: auto
Please specify the full shared storage connection path to use (example: host:/path): 172.17.28.5:/ovirt_hosted_engine
Following is displayed on the screen:
[ INFO ] Creating Storage Domain
[ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Check local VM dir stat]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Enforce local VM dir existence]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch host facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch cluster ID]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch cluster facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch Datacenter facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch Datacenter ID]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Fetch Datacenter name]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Add NFS storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[General Exception]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[General Exception]\". HTTP response code is 400."}
Even with this error – storage gets mounted on the Host:
172.17.28.5:/ovirt_hosted_engine on /rhev/data-center/mnt/172.17.28.5:_ovirt__hosted__engine type nfs4 (rw,relatime,vers=4.0,rsize=65536,wsize=65536,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=172.17.28.11,local_lock=none,addr=172.17.28.5)
But playbook execution fails and we can not proceed with install.
Please advise.
Kindly awaiting your reply.
Marko Vrgotic
4 years, 10 months
Re: ovirt metrics ansible error
by Jayme
I just tried again from scratch this time making sure a proper wildcard DNS
entry existed and without using the set /etc/hosts option and am still
running in to the pods issue. Can anyone confirm if this requires a public
external IP to work? I am working on an internal DNS zone here and natted
ips.
On Tue, May 28, 2019 at 3:28 PM Edward Berger <edwberger(a)gmail.com> wrote:
> In my case it was a single bare metal host, so that would be equivalent to
> disabling iptables on the master0 VM you're installing to, in your ovirt
> scenario.
>
> On Tue, May 28, 2019 at 1:25 PM Jayme <jaymef(a)gmail.com> wrote:
>
>> Do you mean the iptables firewall on the server being installed to i.e.
>> master0 or the actual oVirt host that the master0 VM is running on? I did
>> try flushing iptables rules on master0 VM then ran plays again from
>> installer VM but fail at the same point.
>>
>> Does this log message have anything to do with the issue, /etc/cni
>> directory does not even exist on master0 VM.
>>
>> May 28 17:23:35 master0 origin-node: W0528 17:23:35.012902 10434
>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d
>> May 28 17:23:35 master0 origin-node: E0528 17:23:35.013398 10434
>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false
>> reason:NetworkPluginNotReady message:docker: network plugin is not ready:
>> cni config uninitialized
>>
>>
>>
>> On Tue, May 28, 2019 at 1:19 PM Edward Berger <edwberger(a)gmail.com>
>> wrote:
>>
>>> > TASK [openshift_control_plane : Wait for control plane pods to appear]
>>> *********
>>> > Monday 27 May 2019 13:31:54 +0000 (0:00:00.180) 0:14:33.857
>>> ************
>>> > FAILED - RETRYING: Wait for control plane pods to appear (60 retries
>>> left).
>>> > FAILED - RETRYING: Wait for control plane pods to appear (59 retries
>>> left).
>>> > It eventually counts all the way down to zero and fails.
>>>
>>> This looks a lot like the issues I saw when the host firewall (iptables)
>>> was blocking another OKD all-in-one-host install script [1].
>>> Disabling iptables allowed the installation to continue for my proof of
>>> concept "cluster".
>>>
>>> [1]https://github.com/gshipley/installcentos
>>>
>>> The other error I had with [1] was it was trying to install a couple of
>>> packages (zile and python2-pip) from EPEL with the repo disabled.
>>>
>>>
>>>
>>> On Tue, May 28, 2019 at 10:41 AM Jayme <jaymef(a)gmail.com> wrote:
>>>
>>>> Shirly,
>>>>
>>>> Oh and I should mention that I did verify that NetworkManager was
>>>> installed on the master0 VM and enabled/started the second go around. So
>>>> that service is there and running.
>>>>
>>>> # systemctl list-unit-files | grep Network
>>>> dbus-org.freedesktop.NetworkManager.service
>>>> enabled
>>>> NetworkManager-dispatcher.service
>>>> enabled
>>>> NetworkManager-wait-online.service
>>>> enabled
>>>> NetworkManager.service
>>>> enabled
>>>>
>>>> On Tue, May 28, 2019 at 11:13 AM Jayme <jaymef(a)gmail.com> wrote:
>>>>
>>>>> Shirly,
>>>>>
>>>>> I appreciate the help with this. Unfortunately I am still running in
>>>>> to the same problem. So far I've tried to install/enable/start
>>>>> NetworkManager on the existing "master0" server and re-ran the plans from
>>>>> the installer VM. I ran in to the same problem waiting for control plane
>>>>> pods and same errors in syslog.
>>>>>
>>>>> So I wiped everything out, killed the template along with the
>>>>> installer and master VMs. On oVirt engine (I am running 4.3.3.7-1 stable)
>>>>> I did have ovirt-engine-metrics-1.3.0x rpm installed, no yum updates
>>>>> available on an update check. So I installed
>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release43-pre.rpm then
>>>>> proceeded to install the latest version of ovirt-engine-metrics which gave
>>>>> me: ovirt-engine-metrics-1.3.1-1.el7.noarch on hosted engine.
>>>>>
>>>>> After that package was installed I proceeded to follow steps from
>>>>> beginning outlined at:
>>>>> https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_... --
>>>>> I ran in to the docker check issue again (same as my initial email) so I
>>>>> disabled that and again got as far as starting control plane pods before
>>>>> failure.
>>>>>
>>>>> Not sure where to go from here at this point. The only thing I can
>>>>> think of that I did differently vs the instructions outlined above is that
>>>>> I have not crated the wildcard DNS record, however I did set configs to
>>>>> create /etc/hosts entries and they /etc/hosts on the machines have the
>>>>> proper IPs assigned for all hostnames (automatically added by the ansible
>>>>> plays).
>>>>>
>>>>> Any ideas how I can get past the plane pods issue?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> On Tue, May 28, 2019 at 4:23 AM Shirly Radco <sradco(a)redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> The latest release of 4.3.z should already include a fix for this
>>>>>> issue, ovirt-engine-metrics-1.3.1 rpm.
>>>>>>
>>>>>> The issue is that it requires the NetworkManagar to be installed,
>>>>>> running and enabled for it to work.
>>>>>>
>>>>>> You can install it manually on the master0 vm , start and enable it
>>>>>> or you can also install the updated rpm from the nightly builds if your
>>>>>> environment is oVirt 4.2.z:
>>>>>>
>>>>>> https://resources.ovirt.org/pub/ovirt-4.2-snapshot/rpm/el7/noarch/ovirt-e...
>>>>>>
>>>>>> Relevant patches are:
>>>>>> https://gerrit.ovirt.org/#/c/99959/
>>>>>> https://gerrit.ovirt.org/#/c/99718/
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Shirly Radco
>>>>>>
>>>>>> BI Senior Software Engineer
>>>>>>
>>>>>> Red Hat <https://www.redhat.com/>
>>>>>>
>>>>>> <https://www.redhat.com/>
>>>>>>
>>>>>>
>>>>>> On Mon, May 27, 2019 at 4:41 PM Jayme <jaymef(a)gmail.com> wrote:
>>>>>>
>>>>>>> I managed to get past that but am running in to another problem
>>>>>>> later in the process on the control plane pods to appear task. I thought
>>>>>>> perhaps a glitch in the process from the failed docker step previously so
>>>>>>> after a few more runs I tried killing everything and restarting the metrics
>>>>>>> process again from the very beginning and end up hitting the same issue
>>>>>>> with control plane pods even though all other steps/tasks seem to be
>>>>>>> working.
>>>>>>>
>>>>>>> I'm just getting this:
>>>>>>>
>>>>>>> TASK [openshift_control_plane : Wait for control plane pods to
>>>>>>> appear] *********
>>>>>>> Monday 27 May 2019 13:31:54 +0000 (0:00:00.180) 0:14:33.857
>>>>>>> ************
>>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (60 retries
>>>>>>> left).
>>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (59 retries
>>>>>>> left).
>>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (58 retries
>>>>>>> left).
>>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (57 retries
>>>>>>> left).
>>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (56 retries
>>>>>>> left).
>>>>>>>
>>>>>>> It eventually counts all the way down to zero and fails.
>>>>>>>
>>>>>>> In syslog of the master0 server I'm seeing some errors related to
>>>>>>> cni config
>>>>>>>
>>>>>>> May 27 13:39:07 master0 ansible-oc_obj: Invoked with files=None
>>>>>>> kind=pod force=False all_namespaces=None field_selector=None
>>>>>>> namespace=kube-system delete_after=False
>>>>>>> kubeconfig=/etc/origin/master/admin.kubeconfig content=None state=list
>>>>>>> debug=False selector=None name=master-api-master0.xxxxxx.com
>>>>>>> May 27 13:39:09 master0 origin-node: W0527 13:39:09.064230 20150
>>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d
>>>>>>> May 27 13:39:09 master0 origin-node: E0527 13:39:09.064670 20150
>>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false
>>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready:
>>>>>>> cni config uninitialized
>>>>>>> May 27 13:39:13 master0 ansible-oc_obj: Invoked with files=None
>>>>>>> kind=pod force=False all_namespaces=None field_selector=None
>>>>>>> namespace=kube-system delete_after=False
>>>>>>> kubeconfig=/etc/origin/master/admin.kubeconfig content=None state=list
>>>>>>> debug=False selector=None name=master-api-master0.xxxxxx.com
>>>>>>> May 27 13:39:14 master0 origin-node: W0527 13:39:14.066911 20150
>>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d
>>>>>>> May 27 13:39:14 master0 origin-node: E0527 13:39:14.067321 20150
>>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false
>>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready:
>>>>>>> cni config uninitialized
>>>>>>> May 27 13:39:14 master0 origin-node: E0527 13:39:14.814705 20150
>>>>>>> summary.go:102] Failed to get system container stats for
>>>>>>> "/system.slice/origin-node.service": failed to get cgroup stats for
>>>>>>> "/system.slice/origin-node.service": failed to get container info for
>>>>>>> "/system.slice/origin-node.service": unknown container
>>>>>>> "/system.slice/origin-node.service"
>>>>>>> May 27 13:39:19 master0 origin-node: W0527 13:39:19.069450 20150
>>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d
>>>>>>> May 27 13:39:19 master0 origin-node: E0527 13:39:19.069850 20150
>>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false
>>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready:
>>>>>>> cni config uninitialized
>>>>>>>
>>>>>>> On Mon, May 27, 2019 at 9:35 AM Shirly Radco <sradco(a)redhat.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi Jayme,
>>>>>>>>
>>>>>>>> Thank you for reaching out.
>>>>>>>> Please try rerunning the ansible playbook.
>>>>>>>> If this doesn't work, try adding to the integ.ini in the metrics vm
>>>>>>>> openshift_disable_check=docker_storage
>>>>>>>> and rerun the ansible playbook again.
>>>>>>>>
>>>>>>>> Please update how it goes.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> Shirly Radco
>>>>>>>>
>>>>>>>> BI Senior Software Engineer
>>>>>>>>
>>>>>>>> Red Hat <https://www.redhat.com/>
>>>>>>>>
>>>>>>>> <https://www.redhat.com/>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sun, May 26, 2019 at 9:34 PM Jayme <jaymef(a)gmail.com> wrote:
>>>>>>>>
>>>>>>>>> I'm running in to this ansible error during oVirt metrics
>>>>>>>>> installation (following procedures at:
>>>>>>>>> https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_...
>>>>>>>>> )
>>>>>>>>>
>>>>>>>>> This is happening late in the process, after successfully
>>>>>>>>> deploying the installation VM and then running second step from the metrics
>>>>>>>>> VM.
>>>>>>>>>
>>>>>>>>> CHECK [memory_availability : master0.xxxxxx.com]
>>>>>>>>> *************************************************************************************************
>>>>>>>>> fatal: [master0.xxxxxxx.com]: FAILED! => {"changed": true,
>>>>>>>>> "checks": {"disk_availability": {}, "docker_image_availability":
>>>>>>>>> {"changed": true}, "docker_storage": {"failed": true, "failures":
>>>>>>>>> [["OpenShiftCheckException", "Could not find imported module support code
>>>>>>>>> for docker_info. Looked for either AnsibleDockerClient.py or
>>>>>>>>> docker_common.py\nTraceback (most recent call last):\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\",
>>>>>>>>> line 225, in run_check\n result = check.run()\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\",
>>>>>>>>> line 53, in run\n docker_info = self.execute_module(\"docker_info\",
>>>>>>>>> {})\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\",
>>>>>>>>> line 211, in execute_module\n result = self._execute_module(module_name,
>>>>>>>>> module_args, self.tmp, self.task_vars)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
>>>>>>>>> line 809, in _execute_module\n (module_style, shebang, module_data,
>>>>>>>>> module_path) = self._configure_module(module_name=module_name,
>>>>>>>>> module_args=module_args, task_vars=task_vars)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
>>>>>>>>> line 203, in _configure_module\n environment=final_environment)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 1023, in modify_module\n environment=environment)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 859, in _find_module_utils\n recursive_finder(module_name,
>>>>>>>>> b_module_data, py_module_names, py_module_cache, zf)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 621, in recursive_finder\n raise AnsibleError('
>>>>>>>>> '.join(msg))\nAnsibleError: Could not find imported module support code for
>>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or
>>>>>>>>> docker_common.py\n"]], "msg": "Could not find imported module support code
>>>>>>>>> for docker_info. Looked for either AnsibleDockerClient.py or
>>>>>>>>> docker_common.py\nTraceback (most recent call last):\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\",
>>>>>>>>> line 225, in run_check\n result = check.run()\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\",
>>>>>>>>> line 53, in run\n docker_info = self.execute_module(\"docker_info\",
>>>>>>>>> {})\n File
>>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\",
>>>>>>>>> line 211, in execute_module\n result = self._execute_module(module_name,
>>>>>>>>> module_args, self.tmp, self.task_vars)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
>>>>>>>>> line 809, in _execute_module\n (module_style, shebang, module_data,
>>>>>>>>> module_path) = self._configure_module(module_name=module_name,
>>>>>>>>> module_args=module_args, task_vars=task_vars)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
>>>>>>>>> line 203, in _configure_module\n environment=final_environment)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 1023, in modify_module\n environment=environment)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 859, in _find_module_utils\n recursive_finder(module_name,
>>>>>>>>> b_module_data, py_module_names, py_module_cache, zf)\n File
>>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
>>>>>>>>> line 621, in recursive_finder\n raise AnsibleError('
>>>>>>>>> '.join(msg))\nAnsibleError: Could not find imported module support code for
>>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or
>>>>>>>>> docker_common.py\n"}, "memory_availability": {}, "package_availability":
>>>>>>>>> {"changed": false, "invocation": {"module_args": {"packages": ["PyYAML",
>>>>>>>>> "bash-completion", "bind", "ceph-common", "dnsmasq", "docker", "firewalld",
>>>>>>>>> "flannel", "glusterfs-fuse", "httpd-tools", "iptables",
>>>>>>>>> "iptables-services", "iscsi-initiator-utils", "libselinux-python",
>>>>>>>>> "nfs-utils", "ntp", "openssl", "origin", "origin-clients",
>>>>>>>>> "origin-hyperkube", "origin-node", "pyparted", "python-httplib2",
>>>>>>>>> "yum-utils"]}}}, "package_version": {"changed": false, "invocation":
>>>>>>>>> {"module_args": {"package_list": [{"check_multi": false, "name": "origin",
>>>>>>>>> "version": ""}, {"check_multi": false, "name": "origin-master", "version":
>>>>>>>>> ""}, {"check_multi": false, "name": "origin-node", "version": ""}],
>>>>>>>>> "package_mgr": "yum"}}}}, "msg": "One or more checks failed",
>>>>>>>>> "playbook_context": "install"}
>>>>>>>>>
>>>>>>>>> NO MORE HOSTS LEFT
>>>>>>>>> *******************************************************************************************************************************************
>>>>>>>>>
>>>>>>>>> PLAY RECAP
>>>>>>>>> ***************************************************************************************************************************************************
>>>>>>>>> localhost : ok=35 changed=1 unreachable=0
>>>>>>>>> failed=0 skipped=16 rescued=0 ignored=0
>>>>>>>>> master0.xxxxxxx.com : ok=96 changed=6 unreachable=0
>>>>>>>>> failed=1 skipped=165 rescued=0 ignored=0
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> INSTALLER STATUS
>>>>>>>>> *********************************************************************************************************************************************
>>>>>>>>> Initialization : Complete (0:00:16)
>>>>>>>>> Health Check : In Progress (0:00:36)
>>>>>>>>> This phase can be restarted by running:
>>>>>>>>> playbooks/openshift-checks/pre-install.yml
>>>>>>>>> Sunday 26 May 2019 16:36:25 +0000 (0:00:36.151) 0:01:56.339
>>>>>>>>> ************
>>>>>>>>>
>>>>>>>>> ===============================================================================
>>>>>>>>> Run health checks (install) - EL
>>>>>>>>> ---------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 36.15s
>>>>>>>>> os_firewall : Ensure iptables services are not enabled
>>>>>>>>> ------------------------------------------------------------------------------------------------
>>>>>>>>> 2.74s
>>>>>>>>> openshift_repos : Ensure libselinux-python is installed
>>>>>>>>> -----------------------------------------------------------------------------------------------
>>>>>>>>> 1.77s
>>>>>>>>> openshift_repos : refresh cache
>>>>>>>>> -----------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.60s
>>>>>>>>> Gather Cluster facts
>>>>>>>>> ----------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.51s
>>>>>>>>> container_runtime : Fixup SELinux permissions for docker
>>>>>>>>> ----------------------------------------------------------------------------------------------
>>>>>>>>> 1.33s
>>>>>>>>> container_runtime : Place additional/blocked/insecure registries
>>>>>>>>> in /etc/containers/registries.conf
>>>>>>>>> --------------------------------------------------- 1.30s
>>>>>>>>> Ensure openshift-ansible installer package deps are installed
>>>>>>>>> -----------------------------------------------------------------------------------------
>>>>>>>>> 1.29s
>>>>>>>>> container_runtime : Install Docker
>>>>>>>>> --------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.17s
>>>>>>>>> Initialize openshift.node.sdn_mtu
>>>>>>>>> ---------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.13s
>>>>>>>>> os_firewall : Install firewalld packages
>>>>>>>>> --------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.13s
>>>>>>>>> container_runtime : Set various Docker options
>>>>>>>>> --------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.11s
>>>>>>>>> install NetworkManager
>>>>>>>>> --------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.10s
>>>>>>>>> openshift_repos : Configure correct origin release repository
>>>>>>>>> -----------------------------------------------------------------------------------------
>>>>>>>>> 1.05s
>>>>>>>>> container_runtime : Get current installed Docker version
>>>>>>>>> ----------------------------------------------------------------------------------------------
>>>>>>>>> 1.04s
>>>>>>>>> openshift_repos : Configure origin gpg keys
>>>>>>>>> -----------------------------------------------------------------------------------------------------------
>>>>>>>>> 1.04s
>>>>>>>>> openshift_repos : Remove openshift_additional.repo file
>>>>>>>>> -----------------------------------------------------------------------------------------------
>>>>>>>>> 0.99s
>>>>>>>>> container_runtime : Setup the docker-storage for overlay
>>>>>>>>> ----------------------------------------------------------------------------------------------
>>>>>>>>> 0.96s
>>>>>>>>> Detecting Operating System from ostree_booted
>>>>>>>>> ---------------------------------------------------------------------------------------------------------
>>>>>>>>> 0.95s
>>>>>>>>> Gather Cluster facts
>>>>>>>>> ----------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>> 0.92s
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Failure summary:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 1. Hosts: master0.xxxxxxx.com
>>>>>>>>> Play: OpenShift Health Checks
>>>>>>>>> Task: Run health checks (install) - EL
>>>>>>>>> Message: One or more checks failed
>>>>>>>>> Details: check "docker_storage":
>>>>>>>>> Could not find imported module support code for
>>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or docker_common.py
>>>>>>>>> Traceback (most recent call last):
>>>>>>>>> File
>>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py",
>>>>>>>>> line 225, in run_check
>>>>>>>>> result = check.run()
>>>>>>>>> File
>>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py",
>>>>>>>>> line 53, in run
>>>>>>>>> docker_info =
>>>>>>>>> self.execute_module("docker_info", {})
>>>>>>>>> File
>>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py",
>>>>>>>>> line 211, in execute_module
>>>>>>>>> result = self._execute_module(module_name,
>>>>>>>>> module_args, self.tmp, self.task_vars)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line
>>>>>>>>> 809, in _execute_module
>>>>>>>>> (module_style, shebang, module_data,
>>>>>>>>> module_path) = self._configure_module(module_name=module_name,
>>>>>>>>> module_args=module_args, task_vars=task_vars)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line
>>>>>>>>> 203, in _configure_module
>>>>>>>>> environment=final_environment)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
>>>>>>>>> 1023, in modify_module
>>>>>>>>> environment=environment)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
>>>>>>>>> 859, in _find_module_utils
>>>>>>>>> recursive_finder(module_name, b_module_data,
>>>>>>>>> py_module_names, py_module_cache, zf)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
>>>>>>>>> 621, in recursive_finder
>>>>>>>>> raise AnsibleError(' '.join(msg))
>>>>>>>>> AnsibleError: Could not find imported module
>>>>>>>>> support code for docker_info. Looked for either AnsibleDockerClient.py or
>>>>>>>>> docker_common.py
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> The execution of "install_okd.yaml" includes checks designed to
>>>>>>>>> fail early if the requirements of the playbook are not met. One or more of
>>>>>>>>> these checks failed. To disregard these results,explicitly disable checks
>>>>>>>>> by setting an Ansible variable:
>>>>>>>>> openshift_disable_check=docker_storage
>>>>>>>>> Failing check names are shown in the failure details above. Some
>>>>>>>>> checks may be configurable by variables if your requirements are different
>>>>>>>>> from the defaults; consult check documentation.
>>>>>>>>> Variables can be set in the inventory or passed on the command
>>>>>>>>> line using the -e flag to ansible-playbook.
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list -- users(a)ovirt.org
>>>>>>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>>>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>>>>>> oVirt Code of Conduct:
>>>>>>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>>>>>>> List Archives:
>>>>>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/SEFPOF36T7G...
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>> Users mailing list -- users(a)ovirt.org
>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>> oVirt Code of Conduct:
>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>> List Archives:
>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/CN6G76Z7MVN...
>>>>
>>>
4 years, 10 months
Re: nested attributes of structs
by Nathanaël Blanchet
Hello Lucie,
Can you give me the BZ number so I can follow the ticket?
I'd like to test the ansible patch as soon as it's available.
De: "Lucie Leistnerova" <lleistne(a)redhat.com>
À: "Nathanaël Blanchet" <blanchet(a)abes.fr>, "users" <users(a)ovirt.org>
Envoyé: Mercredi 29 Mai 2019 08:31:16
Objet: Re: [ovirt-users] nested attributes of structs
Hi Nathanaël,
On 5/28/19 5:21 PM, Nathanaël Blanchet wrote:
Hello,
Considering:
https://bugzilla.redhat.com/show_bug.cgi?id=1653743 and https://github.com/ansible/ansible/issues/30624
I installed latest 4.3 sdk and ansible 2.8 but I still can't get the name of the href link doing this:
- name : disk facts
ovirt_disk_facts :
auth : "{{ ovirt_auth }}"
fetch_nested: true
it still gives:
"storage_domains": [
{
"href": "/ovirt-engine/api/storagedomains/0dc2941a-bdc2-4ce4-8ad7-43fa9c944f88",
"id": "0dc2941a-bdc2-4ce4-8ad7-43fa9c944f88"
}
If I understand, I should get the storage_domain name instead of its id, shouldn't I?
The change seems to not work perfectly.
When I run playbook with
fetch_nested: True
nested_attributes:
- name
I get
"quota": {
"href": "/ovirt-engine/api/datacenters/87bc2e30-f3b1-11e8-aa7d-001a4a013f36/quotas/96f2a2e4-f3b1-11e8-82b6-001a4a013f36",
"id": "96f2a2e4-f3b1-11e8-82b6-001a4a013f36",
"name": "Default"
},
"disk_profile": {
"href": "/ovirt-engine/api/storagedomains/82ceb4c9-e844-4fc7-b0ff-559052e6301f/diskprofiles/30cc8a74-4b99-4aab-8193-28826bbecbb9",
"id": "30cc8a74-4b99-4aab-8193-28826bbecbb9",
"name": "ll-03s1-43-3"
},
So for direct link
<quota href="/ovirt-engine/api/datacenters/87bc2e30-f3b1-11e8-aa7d-001a4a013f36/quotas/96f2a2e4-f3b1-11e8-82b6-001a4a013f36" id="96f2a2e4-f3b1-11e8-82b6-001a4a013f36"/>
it works fine. But storage domains are different, it is a list of links.
<storage_domains>
<storage_domain href="/ovirt-engine/api/storagedomains/82ceb4c9-e844-4fc7-b0ff-559052e6301f" id="82ceb4c9-e844-4fc7-b0ff-559052e6301f"/>
</storage_domains>
I'll check it with developer and update by verifying the BZ.
Thanks for catching that issue.
BQ_BEGIN
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr
_______________________________________________
Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L4ZHNR6YWLB...
BQ_END
Best regards,
--
Lucie Leistnerova
Senior Quality Engineer, QE Cloud, RHVM
Red Hat EMEA
IRC: lleistne @ #rhev-qe
4 years, 10 months
Administration Portal "Uncaught Exception" Issue
by Zachary Winter
I am consistently receiving error warnings in the Administration Portal
the read as follows:
/"Uncaught exception occurred. Please try reloading the page. Details:
(TypeError) : Cannot read property 'a' of null/
//
/Please have your administrator check the UI logs"/
/
/
My questions are:
1) Where/What are the UI logs?
2) Is this a known issue, and how do I fix it?
//
4 years, 10 months
nested attributes of structs
by Nathanaël Blanchet
Hello,
Considering:
https://bugzilla.redhat.com/show_bug.cgi?id=1653743 and
https://github.com/ansible/ansible/issues/30624
I installed latest 4.3 sdk and ansible 2.8 but I still can't get the
name of the href link doing this:
- name: disk facts
ovirt_disk_facts:
auth: "{{ ovirt_auth }}"
fetch_nested: true
it still gives:
"storage_domains": [
{
"href":
"/ovirt-engine/api/storagedomains/0dc2941a-bdc2-4ce4-8ad7-43fa9c944f88",
"id": "0dc2941a-bdc2-4ce4-8ad7-43fa9c944f88"
}
If I understand, I should get the storage_domain name instead of its id,
shouldn't I?
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
4 years, 10 months
oVirt Simple Backup support?
by michael＠wanderingmad.com
I just started using oVirt Simpe backup and I see that the maintainer is no longer going to maintain it. So far it seems like the most elegant solution to backing up VMs, is someone else going to maintain it? will it be "adopted" by the oVirt team?
4 years, 10 months
ovirt metrics ansible error
by Jayme
I'm running in to this ansible error during oVirt metrics installation
(following procedures at:
https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_...
)
This is happening late in the process, after successfully deploying the
installation VM and then running second step from the metrics VM.
CHECK [memory_availability : master0.xxxxxx.com]
*************************************************************************************************
fatal: [master0.xxxxxxx.com]: FAILED! => {"changed": true, "checks":
{"disk_availability": {}, "docker_image_availability": {"changed": true},
"docker_storage": {"failed": true, "failures": [["OpenShiftCheckException",
"Could not find imported module support code for docker_info. Looked for
either AnsibleDockerClient.py or docker_common.py\nTraceback (most recent
call last):\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\",
line 225, in run_check\n result = check.run()\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\",
line 53, in run\n docker_info = self.execute_module(\"docker_info\",
{})\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\",
line 211, in execute_module\n result = self._execute_module(module_name,
module_args, self.tmp, self.task_vars)\n File
\"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
line 809, in _execute_module\n (module_style, shebang, module_data,
module_path) = self._configure_module(module_name=module_name,
module_args=module_args, task_vars=task_vars)\n File
\"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
line 203, in _configure_module\n environment=final_environment)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 1023, in modify_module\n environment=environment)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 859, in _find_module_utils\n recursive_finder(module_name,
b_module_data, py_module_names, py_module_cache, zf)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 621, in recursive_finder\n raise AnsibleError('
'.join(msg))\nAnsibleError: Could not find imported module support code for
docker_info. Looked for either AnsibleDockerClient.py or
docker_common.py\n"]], "msg": "Could not find imported module support code
for docker_info. Looked for either AnsibleDockerClient.py or
docker_common.py\nTraceback (most recent call last):\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\",
line 225, in run_check\n result = check.run()\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\",
line 53, in run\n docker_info = self.execute_module(\"docker_info\",
{})\n File
\"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\",
line 211, in execute_module\n result = self._execute_module(module_name,
module_args, self.tmp, self.task_vars)\n File
\"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
line 809, in _execute_module\n (module_style, shebang, module_data,
module_path) = self._configure_module(module_name=module_name,
module_args=module_args, task_vars=task_vars)\n File
\"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\",
line 203, in _configure_module\n environment=final_environment)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 1023, in modify_module\n environment=environment)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 859, in _find_module_utils\n recursive_finder(module_name,
b_module_data, py_module_names, py_module_cache, zf)\n File
\"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\",
line 621, in recursive_finder\n raise AnsibleError('
'.join(msg))\nAnsibleError: Could not find imported module support code for
docker_info. Looked for either AnsibleDockerClient.py or
docker_common.py\n"}, "memory_availability": {}, "package_availability":
{"changed": false, "invocation": {"module_args": {"packages": ["PyYAML",
"bash-completion", "bind", "ceph-common", "dnsmasq", "docker", "firewalld",
"flannel", "glusterfs-fuse", "httpd-tools", "iptables",
"iptables-services", "iscsi-initiator-utils", "libselinux-python",
"nfs-utils", "ntp", "openssl", "origin", "origin-clients",
"origin-hyperkube", "origin-node", "pyparted", "python-httplib2",
"yum-utils"]}}}, "package_version": {"changed": false, "invocation":
{"module_args": {"package_list": [{"check_multi": false, "name": "origin",
"version": ""}, {"check_multi": false, "name": "origin-master", "version":
""}, {"check_multi": false, "name": "origin-node", "version": ""}],
"package_mgr": "yum"}}}}, "msg": "One or more checks failed",
"playbook_context": "install"}
NO MORE HOSTS LEFT
*******************************************************************************************************************************************
PLAY RECAP
***************************************************************************************************************************************************
localhost : ok=35 changed=1 unreachable=0 failed=0
skipped=16 rescued=0 ignored=0
master0.xxxxxxx.com : ok=96 changed=6 unreachable=0 failed=1
skipped=165 rescued=0 ignored=0
INSTALLER STATUS
*********************************************************************************************************************************************
Initialization : Complete (0:00:16)
Health Check : In Progress (0:00:36)
This phase can be restarted by running:
playbooks/openshift-checks/pre-install.yml
Sunday 26 May 2019 16:36:25 +0000 (0:00:36.151) 0:01:56.339
************
===============================================================================
Run health checks (install) - EL
---------------------------------------------------------------------------------------------------------------------
36.15s
os_firewall : Ensure iptables services are not enabled
------------------------------------------------------------------------------------------------
2.74s
openshift_repos : Ensure libselinux-python is installed
-----------------------------------------------------------------------------------------------
1.77s
openshift_repos : refresh cache
-----------------------------------------------------------------------------------------------------------------------
1.60s
Gather Cluster facts
----------------------------------------------------------------------------------------------------------------------------------
1.51s
container_runtime : Fixup SELinux permissions for docker
----------------------------------------------------------------------------------------------
1.33s
container_runtime : Place additional/blocked/insecure registries in
/etc/containers/registries.conf
--------------------------------------------------- 1.30s
Ensure openshift-ansible installer package deps are installed
-----------------------------------------------------------------------------------------
1.29s
container_runtime : Install Docker
--------------------------------------------------------------------------------------------------------------------
1.17s
Initialize openshift.node.sdn_mtu
---------------------------------------------------------------------------------------------------------------------
1.13s
os_firewall : Install firewalld packages
--------------------------------------------------------------------------------------------------------------
1.13s
container_runtime : Set various Docker options
--------------------------------------------------------------------------------------------------------
1.11s
install NetworkManager
--------------------------------------------------------------------------------------------------------------------------------
1.10s
openshift_repos : Configure correct origin release repository
-----------------------------------------------------------------------------------------
1.05s
container_runtime : Get current installed Docker version
----------------------------------------------------------------------------------------------
1.04s
openshift_repos : Configure origin gpg keys
-----------------------------------------------------------------------------------------------------------
1.04s
openshift_repos : Remove openshift_additional.repo file
-----------------------------------------------------------------------------------------------
0.99s
container_runtime : Setup the docker-storage for overlay
----------------------------------------------------------------------------------------------
0.96s
Detecting Operating System from ostree_booted
---------------------------------------------------------------------------------------------------------
0.95s
Gather Cluster facts
----------------------------------------------------------------------------------------------------------------------------------
0.92s
Failure summary:
1. Hosts: master0.xxxxxxx.com
Play: OpenShift Health Checks
Task: Run health checks (install) - EL
Message: One or more checks failed
Details: check "docker_storage":
Could not find imported module support code for
docker_info. Looked for either AnsibleDockerClient.py or docker_common.py
Traceback (most recent call last):
File
"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py",
line 225, in run_check
result = check.run()
File
"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py",
line 53, in run
docker_info = self.execute_module("docker_info", {})
File
"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py",
line 211, in execute_module
result = self._execute_module(module_name, module_args,
self.tmp, self.task_vars)
File
"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line
809, in _execute_module
(module_style, shebang, module_data, module_path) =
self._configure_module(module_name=module_name, module_args=module_args,
task_vars=task_vars)
File
"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line
203, in _configure_module
environment=final_environment)
File
"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
1023, in modify_module
environment=environment)
File
"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
859, in _find_module_utils
recursive_finder(module_name, b_module_data,
py_module_names, py_module_cache, zf)
File
"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line
621, in recursive_finder
raise AnsibleError(' '.join(msg))
AnsibleError: Could not find imported module support code
for docker_info. Looked for either AnsibleDockerClient.py or
docker_common.py
The execution of "install_okd.yaml" includes checks designed to fail early
if the requirements of the playbook are not met. One or more of these
checks failed. To disregard these results,explicitly disable checks by
setting an Ansible variable:
openshift_disable_check=docker_storage
Failing check names are shown in the failure details above. Some checks may
be configurable by variables if your requirements are different from the
defaults; consult check documentation.
Variables can be set in the inventory or passed on the command line using
the -e flag to ansible-playbook.
4 years, 10 months
Windows Server 2019 Drivers
by racevedo＠lenovo.com
We have updated to oVirt 4.3.3.1 and I'm trying to create a Windows Server 2019 VM. When It's time to select the drivers so the windows installer can detect the hard disk, I am unable to find working drivers. I've tried using virtio-win-0.1.141.iso, oVirt-toolsSetup_4.3-2.el7.iso as well as attaching virtio-0.1.141_amd64.fvd and virtio-0.1.141_x86.fvd as a floppy disk.
I've eventually tried every directory manually in those iso's. Can someone link proper documentation on how to get Windows Server 2019 to work or point to the correct drivers?
Thanks
4 years, 10 months
