Can't install virtio-win with EL7.7/Ovirt-4.3.8 -- rpm error
by Derek Atkins
Hi,
I was trying to install the virtio-win package, but it gives an error:
ERROR You need to update rpm to handle:
rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by virtio-win-0.1.173-6.noarch
Is this a known problem with current 4.3.x and EL7.7?
-derek
--
Derek Atkins 617-623-3745
derek(a)ihtfp.com www.ihtfp.com
Computer and Internet Security Consultant
4 years, 10 months
Re: populating the ISO domain
by Gianluca Cecchi
On Wed, Feb 19, 2020 at 4:37 PM Robert Webb <rwebb(a)ropeguru.com> wrote:
> No.
>
> I am using the Spice viewer and my Data domain is on NFS. When I open the
> "Change CD" option in the viewer, I only see ISO's from the ISO Domain.
>
> I haven't found any other way to actually mount an ISO to a VM other then
> the viewer which kinda sucks. I am used to other environments where I could
> just mount an ISO to a cdrom in the VM config and it shows up in the OS.
>
>
If you can shutdown the VM, you could try to shutdown it and then choose
the arrow near "run" and select "run once".
There you can attach an iso: do you see your data domain isos there?
In my case I have isos on block based data domains: I cannot dynamically
change cd due to the bug I reported, but if I start a VM with "run once" I
can see the ISOs on data domain available and usable (eg to install OS)
See also the "Explanation of Settings in the Run Once Window" section here:
https://www.ovirt.org/documentation/vmm-guide/appe-Reference_Settings_in_...
Gianluca
4 years, 10 months
Re: populating the ISO domain
by Vinícius Ferrão
Hi.
ISO domains were deprecated. Now you should use a Data Domain instead and fill with the ISOs.
If you still using ISO Domain, like me, I only scp the ISOs directly to the storage. You don’t need to use the ISO uploader script. I never made it work anyway LOL.
Sent from my iPhone
> On 19 Feb 2020, at 04:33, "eevans(a)digitaldatatechs.com" <eevans(a)digitaldatatechs.com> wrote:
>
4 years, 10 months
Re: populating the ISO domain
by Gianluca Cecchi
On Wed, Feb 19, 2020 at 4:11 PM Robert Webb <rwebb(a)ropeguru.com> wrote:
> So I had also read that ISO Domains have been deprecated but ran into an
> issue when using console access. It seems that the client does not see any
> ISO files from the Data domains when using the "Change CD" option and that
> is the only option that I have found to be able to use when I need to mount
> an ISO file to a VM.
>
> Am I missing something? If not, how can we deprecate the ISO Domain?
>
>
In case of data domains on block based storage (iSCSI and FC) there is
this outstanding bugzilla not fixed yet:
https://bugzilla.redhat.com/show_bug.cgi?id=1589763
I don't know if it is your use case.
Gianluca
4 years, 10 months
Re: populating the ISO domain
by Strahil Nikolov
On February 19, 2020 5:37:28 PM GMT+02:00, Robert Webb <rwebb(a)ropeguru.com> wrote:
>No.
>
>I am using the Spice viewer and my Data domain is on NFS. When I open
>the "Change CD" option in the viewer, I only see ISO's from the ISO
>Domain.
>
>I haven't found any other way to actually mount an ISO to a VM other
>then the viewer which kinda sucks. I am used to other environments
>where I could just mount an ISO to a cdrom in the VM config and it
>shows up in the OS.
>
>________________________________________
>From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
>Sent: Wednesday, February 19, 2020 10:34 AM
>To: Robert Webb
>Cc: Vinícius Ferrão; eevans(a)digitaldatatechs.com; users(a)ovirt.org
>Subject: Re: [ovirt-users] Re: populating the ISO domain
>
>On Wed, Feb 19, 2020 at 4:11 PM Robert Webb
><rwebb(a)ropeguru.com<mailto:rwebb@ropeguru.com>> wrote:
>So I had also read that ISO Domains have been deprecated but ran into
>an issue when using console access. It seems that the client does not
>see any ISO files from the Data domains when using the "Change CD"
>option and that is the only option that I have found to be able to use
>when I need to mount an ISO file to a VM.
>
>Am I missing something? If not, how can we deprecate the ISO Domain?
>
>
>In case of data domains on block based storage (iSCSI and FC) there is
>this outstanding bugzilla not fixed yet:
>https://bugzilla.redhat.com/show_bug.cgi?id=1589763
>
>I don't know if it is your use case.
>
>Gianluca
>_______________________________________________
>Users mailing list -- users(a)ovirt.org
>To unsubscribe send an email to users-leave(a)ovirt.org
>Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>oVirt Code of Conduct:
>https://www.ovirt.org/community/about/community-guidelines/
>List Archives:
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/FYMZYKUUGQZ...
What about going in Admin portal, select the VM, and then click the 3 dots button ?
There should be a 'Eject' and all your ISOs (I have already migrated to data domain).
Best Regards,
Strahil Nikolov
4 years, 10 months
Re: hosted-engine --deploy --restore-from-file fails with error "Domain format is different from master storage domain format"
by dev＠djagoo.io
Hi Shani,
on the productive cluster (Default) the compat level is 4.3 and on the cluster
it's 4.3 too so I can't raise the level to update the format to V5.
I added some screenshots.
Regards
Marcel
On Tuesday, February 18, 2020 10:51:29 AM CET you wrote:
> Hi Marcel,
> Can you make sure the DC and Cluster formats are V5?
> Maybe try to "update" them by editing the cluster first, and selecting the
> newest Compatibility Version available.
> Then, do the same for the DC.
>
> If all versions/formats are of V5, and it still occurs, can you please
> share some screenshots so I'll have a look?
>
>
> *Regards,*
>
> *Shani Leviim*
>
> On Mon, Feb 17, 2020 at 5:08 PM djagoo <dev(a)djagoo.io> wrote:
> > Hi Shani,
> >
> > I just tried it.
> >
> > I created a new DC and cluster, added a temporary host to this cluster
> > which served as SPM. The new DC showed up as V5.
> > Then I activated maintenance on one of the V4 SDs and detached it from my
> > production domain. After I attached it to the V5 dummy domain it was
> > updated to V5 format as you predicted. I detached it again but could not
> > reattach it to the production domain "There are no compatible Storage
> > Domains to attach to this Data Center". So this seems not to be the
> > solution :(
> >
> > Do you have another idea or am I doing something wrong?
> >
> > Regards,
> >
> > Marcel
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org
> > To unsubscribe send an email to users-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> > https://lists.ovirt.org/archives/list/users@ovirt.org/message/XV6WQNGS3LQU
> > 3GWMR62MNZ5ENQA4BJQZ/
4 years, 10 months
new glance server
by Tommaso - Shellrent
Hi to all.
I'm try to create a glance server to store our images, but I have some
problem.
With the guide i can correcty configure a "train" minimun stack with
keyone and glance, but it only support auth api v3. oVirt for glance
only support v2.
The newest version of keystone that have the v2 api, is Pike, but it
cannot be insalled on centos today.
Where a can fine an old repo with pike packages? or how can i make a
glance installation that doesn't require autentication?
Regards,
Tommaso.
--
Shellrent Logo
*Tommaso De Marchi*
COO Chief Operating Officer - Shellrent S.r.l.
Tel. 0444321155 <tel:+390444321155> | Fax 04441492177
Via dell'Edilizia, 19 - 36100 Vicenza
4 years, 10 months
Error with LDAP
by Lucas Lamy
Hello everyone.
I have previously configured LDAP connexion though ovirt-engine-extension-aaa-ldap-setup.
The only working configuration was IBM Security Directory Server (the IBM Security Directory Server RFC-2307 Schema doesn't work), ladps and anonymous search user. But the LDAP server I’m testing is OpenLDAP and not IBM.
Indeed with IBM the search and login are working fine when I test them with ovirt-engine-extensions-tool aaa.
But when I try to add a LDAP User in the User Administration Panel I get this Error message : "Error while executing action AddUser : Internal Engine Error".
None of the solutions I've found on previous threads seems to works.
Does someone have an idea please ?
Please find the logs attached.
Thank you beforehand.
Caused by: org.postgresql.util.PSQLException: ERROR: null value in column "external_id" violates not-null constraint Detail: Failing row contains (**user info**). Where: SQL statement "INSERT INTO users ( department, domain, email, name, note, surname, user_id, username, external_id, namespace ) VALUES ( v_department, v_domain, v_email, v_name, v_note, v_surname, v_user_id, v_username, v_external_id, v_namespace )" PL/pgSQL function insertuser(character varying,character varying,character varying,character varying,character varying,character varying,uuid,character varying,text,character varying) line 3 at SQL state$ at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2433) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:2178) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:306) at org.postgresql.jdbc.PgStatement.executeInternal(PgStatement.java:441) at org.postgresql.jdbc.PgStatement.execute(PgStatement.java:365) at org.postgresql.jdbc.PgPreparedStatement.executeWithFlags(PgPreparedStatement.java:155) at org.postgresql.jdbc.PgCallableStatement.executeWithFlags(PgCallableStatement.java:78) at org.postgresql.jdbc.PgPreparedStatement.execute(PgPreparedStatement.java:144) at org.jboss.jca.adapters.jdbc.CachedPreparedStatement.execute(CachedPreparedStatement.java:303) at org.jboss.jca.adapters.jdbc.WrappedPreparedStatement.execute(WrappedPreparedStatement.java:442) at org.springframework.jdbc.core.JdbcTemplate.lambda$call$4(JdbcTemplate.java:1105) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:1050) [spring-jdbc.jar:5.0.4.RELEASE] ... 162 more 2020-02-15 10:16:53,337+01 ERROR [org.ovirt.engine.core.bll.aaa.AddUserCommand] (default task-4) [222f7ca7-b669-40e0-b152-2ca898ebde09] Transaction rolled-back for command 'org.ovirt.engine.core.bll.aaa.$ 2020-02-15 10:16:53,341+01 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-4) [222f7ca7-b669-40e0-b152-2ca898ebde09] EVENT_ID: USER_FAILED_ADD_ADUSER(327), Fail, Failed to add User 'user' to the system.
4 years, 10 months
populating the ISO domain
by eevans＠digitaldatatechs.com
This may be common knowledge so if it is redundant, apologies.
My ISO domain did not populate automatically but with some research I found out how to utilize it and populate it.
If you have it in place with the correct permissions and security, you can manually populate it using the api.
From the engine host at the command prompt:
# ovirt-iso-uploader list
This gives you the name of your iso domain. If it prompts for a passwd, it should the the same as the admin@internal login.
The to upload files and populate it:
ovirt-iso-uploader -i ISO upload *.iso or *vfd for floppy images
I hope this helps.
4 years, 10 months
