September 2020 - Users - oVirt List Archives

Moving VM disks from one storage domain to another. Automate?
by Green, Jacob Allen /C 08 Oct '20

08 Oct '20

I am looking for an automated way, via Ansible to move a VM disk from one storage domain to another. I found the following, https://docs.ansible.com/ansible/latest/modules/ovirt_disk_module.html and while it mentions copying a VM disk image from one domain to another it does not mention a live storage migration. Which is what I am looking to do. I want to take roughly 100 VMs and move their disk images from one domain to another that is available to the datacenter in some automated/scripted fashion. I am just curious if anyone out there has had to do this and how they tackled it. Or perhaps I am missing some easy obvious way, other than clicking all the disks and clicking move. However from the looks of it, if I did click all the disk and selected move, it appears RHV tries to do them all at once, which is probably not ideal, I would like it to move the disks in a serial One after another fashion, to conserve throughput and IO. I also did not see anything on Ansible galaxy or the ovirt github that would do this. Thank you.

3 2

oVirt Survey Autumn 2020
by Sandro Bonazzola 06 Oct '20

06 Oct '20

As we continue to develop oVirt 4.4, the Development and Integration teams at Red Hat would value insights on how you are deploying the oVirt environment. Please help us to hit the mark by completing this short survey. The survey will close on October 18th 2020. If you're managing multiple oVirt deployments with very different use cases or very different deployments you can consider answering this survey multiple times. *Please note the answers to this survey will be publicly accessible*. This survey is under oVirt Privacy Policy available at https://www.ovirt.org/site/privacy-policy.html . The survey is available https://forms.gle/bPvEAdRyUcyCbgEc7 -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 4

oVirt Node 4.4.2 is now generally available
by Sandro Bonazzola 06 Oct '20

06 Oct '20

oVirt Node 4.4.2 is now generally available The oVirt project is pleased to announce the general availability of oVirt Node 4.4.2 , as of September 25th, 2020. This release completes the oVirt 4.4.2 release published on September 17th Important notes before you install / upgrade Please note that oVirt 4.4 only supports clusters and data centers with compatibility version 4.2 and above. If clusters or data centers are running with an older compatibility version, you need to upgrade them to at least 4.2 (4.3 is recommended). Please note that in RHEL 8 / CentOS 8 several devices that worked on EL7 are no longer supported. For example, the megaraid_sas driver is removed. If you use Enterprise Linux 8 hosts you can try to provide the necessary drivers for the deprecated hardware using the DUD method (See the users’ mailing list thread on this at https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NDSVUZSESOXEFJ… ) How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.2 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.2 (redeploy in case of already being on 4.4.2). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt Node 4.4.2 Release? oVirt Node has been updated, including: - oVirt 4.4.2: http://www.ovirt.org/release/4.4.2/ - Ansible 2.9.13: https://github.com/ansible/ansible/blob/stable-2.9/changelogs/CHANGELOG-v2.… - Glusterfs 7.7: https://docs.gluster.org/en/latest/release-notes/7.7/ - Advanced Virtualization 8.2.1 See the release notes [1] for installation instructions and a list of new features and bugs fixed. Additional resources: - Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

6 27

Re: OVN Geneve tunnels not been established
by Konstantinos Betsis 06 Oct '20

06 Oct '20

I did a restart of the ovn-controller, this is the output of the ovn-controller.log 2020-09-11T10:54:07.566Z|00001|vlog|INFO|opened log file /var/log/openvswitch/ovn-controller.log 2020-09-11T10:54:07.568Z|00002|reconnect|INFO|unix:/var/run/openvswitch/db.sock: connecting... 2020-09-11T10:54:07.568Z|00003|reconnect|INFO|unix:/var/run/openvswitch/db.sock: connected 2020-09-11T10:54:07.570Z|00004|main|INFO|OVS IDL reconnected, force recompute. 2020-09-11T10:54:07.571Z|00005|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connecting... 2020-09-11T10:54:07.571Z|00006|main|INFO|OVNSB IDL reconnected, force recompute. 2020-09-11T10:54:07.685Z|00007|stream_ssl|WARN|SSL_connect: unexpected SSL connection close 2020-09-11T10:54:07.685Z|00008|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connection attempt failed (Protocol error) 2020-09-11T10:54:08.685Z|00009|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connecting... 2020-09-11T10:54:08.800Z|00010|stream_ssl|WARN|SSL_connect: unexpected SSL connection close 2020-09-11T10:54:08.800Z|00011|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connection attempt failed (Protocol error) 2020-09-11T10:54:08.800Z|00012|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: waiting 2 seconds before reconnect 2020-09-11T10:54:10.802Z|00013|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connecting... 2020-09-11T10:54:10.917Z|00014|stream_ssl|WARN|SSL_connect: unexpected SSL connection close 2020-09-11T10:54:10.917Z|00015|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connection attempt failed (Protocol error) 2020-09-11T10:54:10.917Z|00016|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: waiting 4 seconds before reconnect 2020-09-11T10:54:14.921Z|00017|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connecting... 2020-09-11T10:54:15.036Z|00018|stream_ssl|WARN|SSL_connect: unexpected SSL connection close 2020-09-11T10:54:15.036Z|00019|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: connection attempt failed (Protocol error) 2020-09-11T10:54:15.036Z|00020|reconnect|INFO|ssl:OVIRT_ENGINE_IP:6642: continuing to reconnect in the background but suppressing further logging I have also done the vdsm-tool ovn-config OVIRT_ENGINE_IP OVIRTMGMT_NETWORK_DC This is how the OVIRT_ENGINE_IP is provided in the ovn controller, i can redo it if you wan. After the restart of the ovn-controller the OVIRT ENGINE still shows only two geneve connections one with DC01-host02 and DC02-host01. Chassis "c4b23834-aec7-4bf8-8be7-aa94a50a6144" hostname: "dc02-host01" Encap geneve ip: "DC02-host01_IP" options: {csum="true"} Chassis "be3abcc9-7358-4040-a37b-8d8a782f239c" hostname: "DC01-host02" Encap geneve ip: "DC01-host02" options: {csum="true"} I've re-done the vdsm-tool command and nothing changed.... again....with the same errors as the systemctl restart ovn-controller On Fri, Sep 11, 2020 at 1:49 PM Dominik Holler <dholler(a)redhat.com> wrote: > Please include ovirt-users list in your reply, to share the knowledge and > experience with the community! > > On Fri, Sep 11, 2020 at 12:12 PM Konstantinos Betsis <k.betsis(a)gmail.com> > wrote: > >> Ok below the output per node and DC >> DC01 >> node01 >> >> [root@dc01-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-remote >> "ssl:*OVIRT_ENGINE_IP*:6642" >> [root@ dc01-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-type >> geneve >> [root@ dc01-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-ip >> >> "*OVIRTMGMT_IP_DC01-NODE01*" >> >> node02 >> >> [root@dc01-node02 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-remote >> "ssl:*OVIRT_ENGINE_IP*:6642" >> [root@ dc01-node02 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-type >> geneve >> [root@ dc01-node02 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-ip >> >> "*OVIRTMGMT_IP_DC01-NODE02*" >> >> DC02 >> node01 >> >> [root@dc02-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-remote >> "ssl:*OVIRT_ENGINE_IP*:6642" >> [root@ dc02-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-type >> geneve >> [root@ dc02-node01 ~]# ovs-vsctl --no-wait get open . >> external-ids:ovn-encap-ip >> >> "*OVIRTMGMT_IP_DC02-NODE01*" >> >> > Looks good. > > >> DC01 node01 and node02 share the same VM networks and VMs deployed on top >> of them cannot talk to VM on the other hypervisor. >> > > Maybe there is a hint on ovn-controller.log on dc01-node02 ? Maybe > restarting ovn-controller creates more helpful log messages? > > You can also try restart the ovn configuration on all hosts by executing > vdsm-tool ovn-config OVIRT_ENGINE_IP LOCAL_OVIRTMGMT_IP > on each host, this would trigger > > https://github.com/oVirt/ovirt-provider-ovn/blob/master/driver/scripts/setu… > internally. > > >> So I would expect to see the same output for node01 to have a geneve >> tunnel to node02 and vice versa. >> >> > Me too. > > >> On Fri, Sep 11, 2020 at 12:14 PM Dominik Holler <dholler(a)redhat.com> >> wrote: >> >>> >>> >>> On Fri, Sep 11, 2020 at 10:53 AM Konstantinos Betsis <k.betsis(a)gmail.com> >>> wrote: >>> >>>> Hi Dominik >>>> >>>> OVN is selected as the default network provider on the clusters and the >>>> hosts. >>>> >>>> >>> sounds good. >>> This configuration is required already during the host is added to oVirt >>> Engine, because OVN is configured during this step. >>> >>> >>>> The "ovn-sbctl show" works on the ovirt engine and shows only two >>>> hosts, 1 per DC. >>>> >>>> Chassis "c4b23834-aec7-4bf8-8be7-aa94a50a6144" >>>> hostname: "dc01-node02" >>>> Encap geneve >>>> ip: "X.X.X.X" >>>> options: {csum="true"} >>>> Chassis "be3abcc9-7358-4040-a37b-8d8a782f239c" >>>> hostname: "dc02-node1" >>>> Encap geneve >>>> ip: "A.A.A.A" >>>> options: {csum="true"} >>>> >>>> >>>> The new node is not listed (dc01-node1). >>>> >>>> When executed on the nodes the same command (ovn-sbctl show) times-out >>>> on all nodes..... >>>> >>>> The output of the /var/log/openvswitch/ovn-conntroller.log lists on all >>>> logs >>>> >>>> 2020-09-11T08:46:55.197Z|07361|stream_ssl|WARN|SSL_connect: unexpected >>>> SSL connection close >>>> >>>> >>>> >>> Can you please compare the output of >>> >>> ovs-vsctl --no-wait get open . external-ids:ovn-remote >>> ovs-vsctl --no-wait get open . external-ids:ovn-encap-type >>> ovs-vsctl --no-wait get open . external-ids:ovn-encap-ip >>> >>> of the working hosts, e.g. dc01-node02, and the failing host dc01-node1? >>> This should point us the relevant difference in the configuration. >>> >>> Please include ovirt-users list in your replay, to share the knowledge >>> and experience with the community. >>> >>> >>> >>>> Thank you >>>> Best regards >>>> Konstantinos Betsis >>>> >>>> >>>> On Fri, Sep 11, 2020 at 11:01 AM Dominik Holler <dholler(a)redhat.com> >>>> wrote: >>>> >>>>> >>>>> >>>>> On Thu, Sep 10, 2020 at 6:26 PM Konstantinos B <k.betsis(a)gmail.com> >>>>> wrote: >>>>> >>>>>> Hi all >>>>>> >>>>>> We have a small installation based on OVIRT 4.3. >>>>>> 1 Cluster is based on Centos 7 and the other on OVIRT NG Node image. >>>>>> >>>>>> The environment was stable till an upgrade took place a couple of >>>>>> months ago. >>>>>> As such we had to re-install one of the Centos 7 node and start from >>>>>> scratch. >>>>>> >>>>> >>>>> To trigger the automatic configuration of the host, it is required to >>>>> configure ovirt-provider-ovn as the default network provider for the >>>>> cluster before adding the host to oVirt. >>>>> >>>>> >>>>>> Even though the installation completed successfully and VMs are >>>>>> created, the following are not working as expected: >>>>>> 1. ovn geneve tunnels are not established with the other Centos 7 >>>>>> node in the cluster. >>>>>> 2. Centos 7 node is configured by ovirt engine however no geneve >>>>>> tunnel is established when "ovn-sbctl show" is issued on the engine. >>>>>> >>>>> >>>>> Does "ovn-sbctl show" list the hosts? >>>>> >>>>> >>>>>> 3. no flows are shown on the engine on port 6642 for the ovs db. >>>>>> >>>>>> Does anyone have any experience on how to troubleshoot OVN on ovirt? >>>>>> >>>>>> >>>>> /var/log/openvswitch/ovncontroller.log on the host should contain a >>>>> helpful hint. >>>>> >>>>> >>>>> >>>>>> Thank you >>>>>> _______________________________________________ >>>>>> Users mailing list -- users(a)ovirt.org >>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>>>>> oVirt Code of Conduct: >>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>> List Archives: >>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/LBVGLQJBWJF3E… >>>>>> >>>>>

3 30

Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way
by Kushagra Agarwal 02 Oct '20

02 Oct '20

I was hoping if i can get some help with the below oVirt scenario: *Problem Statement*:- Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way *Description*:- Do we have any ansible module or any other CLI based approach which can help us to change 'scheduler optimization' settings of cluster in oVIrt. Scheduler optimization settings of cluster can be found under Scheduling Policy tab ( Compute -> Clusters(select the cluster) -> click on edit and then navigate to scheduling policy Any help in this will be highly appreciated. Thanks, Kushagra

3 7

VM AutoStart
by Jeremey Wise 01 Oct '20

01 Oct '20

When I have to shut down cluster... ups runs out etc.. I need a sequence set of just a small number of VMs to "autostart" Normally I just use DNS FQND to connect to oVirt engine but as two of my VMs are a DNS HA cluster.. as well as NTP / SMTP /DHCP etc... I need those two infrastructure VMs to be auto boot. I looked at HA settings for those VMs but it seems to be watching for pause /resume.. but it does not imply or state auto start on clean first boot. Options? -- p <jeremey.wise(a)gmail.com>enguinpages

4 12

Power on VM - CLI / API
by Jeremey Wise 01 Oct '20

01 Oct '20

Can anyone post link. (with examples.. as most documentation for oVirt lacks this).. where I can power on a VM via CLI or API. As of now I cannot login to oVirt-Engine. No errors when I restart it.. https://lists.ovirt.org/archives/list/users@ovirt.org/thread/45KKF5TN5PRQ3R… BUt... I need to get VMs booted. I tried to follow: http://ovirt.github.io/ovirt-engine-api-model/master/ and my server's API web portal https://ovirte01.penguinpages.local/ovirt-engine/apidoc/#/documents/003_com… And.. even get POSTMAN (real newbie at that tool but ran into how to add exported .pem key from portal to session issues) # failed CLI example: Power on VM "ns01" ########### <<<< DRAFT :: 2020-09-30################ # Get key from oVirt engine and import. Ex: from ovirte01 into server 'thor curl -k ' https://ovirte01.penguinpages.local/ovirt-engine/services/pki-resource?reso…' -o ovirt01_ca.pem sudo cp ovirt01_ca.pem /etc/pki/ca-trust/source/anchors sudo update-ca-trust extract openssl s_client -connect ovirte01.penguinpages.local:443 -showcerts < /dev/null <snip... lots of key info back> # Use key during GET list of VMs ?? <meh? # Power on VM <<fubar still> curl -X POST https://ovirte01.penguinpages.local/post -H /ovirt-engine/api/vms/ns01/start HTTP/1.1 <https://ovirte01.penguinpages.local/post%20-H%20/ovirt-engine/api/vms/ns01/…> ##### I just need to power on VM -- p <jeremey.wise(a)gmail.com>enguinpages

3 2

java.lang.reflect.UndeclaredThrowableException - oVirt engine UI
by Jeremey Wise 01 Oct '20

01 Oct '20

I tried to post on website but .. it did not seem to work... so sorry if this is double posting. oVirt login this AM. accepted username and password but got java error. Restarted oVirt engine ## hosted-engine --set-maintenance --mode=global hosted-engine --vm-shutdown hosted-engine --vm-status #make sure that the status is shutdown before restarting hosted-engine --vm-start hosted-engine --vm-status #make sure the status is health before leaving maintenance mode hosted-engine --set-maintenance --mode=none ## [root@thor ~]# hosted-engine --vm-status --== Host thor.penguinpages.local (id: 1) status ==-- Host ID : 1 Host timestamp : 65342 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : thor.penguinpages.local Local maintenance : False stopped : False crc32 : 824c29fd conf_on_shared_storage : True local_conf_timestamp : 65342 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=65342 (Wed Sep 30 08:11:45 2020) host-id=1 score=3400 vm_conf_refresh_time=65342 (Wed Sep 30 08:11:45 2020) conf_on_shared_storage=True maintenance=False state=EngineDown stopped=False --== Host medusa.penguinpages.local (id: 3) status ==-- Host ID : 3 Host timestamp : 87556 Score : 3400 Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : medusa.penguinpages.local Local maintenance : False stopped : False crc32 : 63296a70 conf_on_shared_storage : True local_conf_timestamp : 87556 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=87556 (Wed Sep 30 08:11:39 2020) host-id=3 score=3400 vm_conf_refresh_time=87556 (Wed Sep 30 08:11:39 2020) conf_on_shared_storage=True maintenance=False state=EngineUp stopped=False [root@thor ~]# yum update -y Last metadata expiration check: 0:31:17 ago on Wed 30 Sep 2020 09:17:03 AM EDT. Dependencies resolved. Nothing to do. Complete! [root@thor ~]# Gogled around .. just found this thread. ## https://bugzilla.redhat.com/show_bug.cgi?id=1378045 # pgadmin connect to ovirte01.penguinpages.com as engine to db engine select mac_addr from vm_interface "00:16:3e:57:0d:47" "56:6f:86:41:00:01" "56:6f:86:41:00:00" "56:6f:86:41:00:02" "56:6f:86:41:00:03" "56:6f:86:41:00:04" "56:6f:86:41:00:05" "56:6f:86:41:00:15" "56:6f:86:41:00:16" "56:6f:86:41:00:17" "56:6f:86:41:00:18" "56:6f:86:41:00:19" # Note one field is "null" Question: 1) is this bad? 2) How do I fix? 3) Any idea on root cause? -- p <jeremey.wise(a)gmail.com>enguinpages

3 2

Gluster Volumes - Correct Peer Connection
by Jeremey Wise 01 Oct '20

01 Oct '20

I just noticed when HCI setup bult the gluster engine / data / vmstore volumes... it did use correctly the definition of 10Gb "back end" interfaces / hosts. But.. oVirt Engine is NOT referencing this. it lists bricks as 1Gb "managment / host" interfaces. Is this a GUI issue? I doubt this and how do I correct it? ### Data Volume Example Name: data Volume ID: 0ae7b487-8b87-4192-bd30-621d445902fe Volume Type: Replicate Replica Count: 3 Number of Bricks: 3 Transport Types: TCP Maximum no of snapshots: 256 Capacity: 999.51 GiB total, 269.02 GiB used, 730.49 GiB free, 297.91 GiB Guaranteed free, 78 Deduplication/Compression savings (%) medusa.penguinpages.local medusa.penguinpages.local:/gluster_bricks/data/data 25% OK odin.penguinpages.local odin.penguinpages.local:/gluster_bricks/data/data 25% OK thor.penguinpages.local thor.penguinpages.local:/gluster_bricks/data/data 25% OK # I have storage back end of 172.16.101.x which is 10Gb dedicated for replication. Peers reflect this [root@odin c4918f28-00ce-49f9-91c8-224796a158b9]# gluster peer status Number of Peers: 2 Hostname: thorst.penguinpages.local Uuid: 7726b514-e7c3-4705-bbc9-5a90c8a966c9 State: Peer in Cluster (Connected) Hostname: medusast.penguinpages.local Uuid: 977b2c1d-36a8-4852-b953-f75850ac5031 State: Peer in Cluster (Connected) [root@odin c4918f28-00ce-49f9-91c8-224796a158b9]# -- p <jeremey.wise(a)gmail.com>enguinpages

5 7

Version 4.4.2.6-1.el8 -Console Error: java.lang.reflect.UndeclaredThrowableException
by penguin pages 30 Sep '20

30 Sep '20

Got message this AM when tried to login to oVirt Engine which up till now has been working fine. I can supply username and password and get portal to choose "Administration Portal" or "VM Portal" I have tested both.. both have same response about java.lang.reflect.UndeclaredThrowableException I restarted the engine # hosted-engine --set-maintenance --mode=global hosted-engine --vm-shutdown hosted-engine --vm-status #make sure that the status is shutdown before restarting hosted-engine --vm-start hosted-engine --vm-status #make sure the status is health before leaving maintenance mode hosted-engine --set-maintenance --mode=none # --== Host thor.penguinpages.local (id: 1) status ==-- Host ID : 1 Host timestamp : 70359 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : thor.penguinpages.local Local maintenance : False stopped : False crc32 : 25adf6d0 conf_on_shared_storage : True local_conf_timestamp : 70359 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=70359 (Wed Sep 30 09:35:22 2020) host-id=1 score=3400 vm_conf_refresh_time=70359 (Wed Sep 30 09:35:22 2020) conf_on_shared_storage=True maintenance=False state=EngineDown stopped=False --== Host medusa.penguinpages.local (id: 3) status ==-- Host ID : 3 Host timestamp : 92582 Score : 3400 Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : medusa.penguinpages.local Local maintenance : False stopped : False crc32 : 623359d2 conf_on_shared_storage : True local_conf_timestamp : 92582 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=92582 (Wed Sep 30 09:35:25 2020) host-id=3 score=3400 vm_conf_refresh_time=92582 (Wed Sep 30 09:35:25 2020) conf_on_shared_storage=True maintenance=False state=EngineUp stopped=False ## I downloaded and installed key from portal.. thinking that may have been issue.. it was not. I googled around /searched forum and nothing jumped out. (only hit I found in forum https://lists.ovirt.org/pipermail/users/2015-June/033421.html but no note about fix)

2 2