May 2021 - Users - oVirt List Archives

Snapshot and disk size allocation
by jorgevisentini＠gmail.com 28 Oct '21

28 Oct '21

Hello everyone. I would like to know how disk size and snapshot allocation works, because every time I create a new snapshot, it increases 1 GB in the VM's disk size, and when I remove the snap, that space is not returned to Domain Storage. I'm using the oVirt 4.3.10 How do I reprovision the VM disk? Thank you all.

5 7

Ooops! in last step of Hyperconverged deployment
by Harry O 24 Sep '21

24 Sep '21

Hi, In the second engine dep run in Hyperconverged deployment I get red "Ooops!" in cockpit. I think it fails on some networking setup. The first oVirt Node says "Hosted Engine is up!" but the other nodes is not added to HostedEngine yet. There is no network connectivity to the Engine outside node1, I can ssh to engine from node1 on the right IP-address. Please tell what logs I should pull.

2 21

How to renew an Ovirt host certificate (vdsmcert.pem) ?
by noua.toukourou＠uni.lu 19 Sep '21

19 Sep '21

Hi, I have an Ovirt host that the vdsmcert.pem expired. The problem is that host contains the self-hosted engine. How to renew the certificate without breaking the self-hosted engine ? Thanks,

3 3

oVirt 4.3 DWH with Grafana
by Vrgotic, Marko 14 Sep '21

14 Sep '21

Dear oVirt, We are currently running oVirt 4.3 and upgrade/migration to 4.4 won’t be possible for few more months. I am looking into guidelines, how to, for setting up Grafana using DataWarehouse as data source. Did anyone already did this, and would be willing to share the steps? Kindly awaiting your reply. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

8 11

Template for Ubuntu 18.04 Server Issues
by jeremy_tourville＠hotmail.com 02 Sep '21

02 Sep '21

I have built a system as a template on oVirt. Specifically, Ubuntu 18.04 server. I am noticing an issue when creating new vms from that template. I used the check box for "seal template" when creating the template. When I create a new Ubuntu VM I am getting duplicate IP addresses for all the machines created from the template. It seems like the checkbox doesn't fully function as intended. I would need to do further manual steps to clear up this issue. Has anyone else noticed this behavior? Is this expected or have I missed something? Thanks for your input!

6 7

Restored engine backup: The provided authorization grant for the auth code has expired.
by Nicolás 05 Aug '21

05 Aug '21

Hi, I'm restoring a full ovirt engine backup, having used the --scope=all option, for oVirt 4.3. I restored the backup on a fresh CentOS7 machine. The process went well, but when trying to log into the restored authentication system I get the following message which won't allow me to log in: The provided authorization grant for the auth code has expired. What does that mean and how can it be fixed? Thanks. Nicolás

4 10

Re: CPU Compatibility Problem after Upgrading Centos 8 Stream Host
by Gunasekhar Kothapalli 28 Jul '21

28 Jul '21

The issue was with edk2-ovmf package update, rolling that package back and it started recognizing the CPU and host coming up... tested on one host and worked fine. Thanks & Regards, Gunasekhar Kothapalli From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Wednesday, May 26, 2021 9:54 PM To: k.gunasekhar(a)non.keysight.com; users(a)ovirt.org Subject: RE: [ovirt-users] Re: CPU Compatibility Problem after Upgrading Centos 8 Stream Host CAUTION: This message originates from an external sender. Already trying several things, seem kernel update doesn't make this problem happen. Already tried to yum update exclude kernel, the issue still happened. Thanks. Regards, Nur Imam Febrianto From: k.gunasekhar--- via Users <mailto:users@ovirt.org> Sent: 26 May 2021 12:27 To: users(a)ovirt.org <mailto:users@ovirt.org> Subject: [ovirt-users] Re: CPU Compatibility Problem after Upgrading Centos 8 Stream Host I also end up with the same problem today. How did rollback yum i see many yum updates in the yum history. Here is what the error says. The host CPU does not match the Cluster CPU Type and is running in a degraded mode. It is missing the following CPU flags: model_IvyBridge, spec_ctrl. Please update the host CPU microcode or change the Cluster CPU Type. _______________________________________________ Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt .org%2Fprivacy-policy.html&data=04%7C01%7C%7Ccdfdf3baa30a417b631a08d9200 6eeac%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637576036430558160%7CUnkn own%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC I6Mn0%3D%7C1000&sdata=ioM1ZSkM2q7CNvInAJQdg0n%2BZdUNSMG%2BpmapvHi%2FFKo% 3D&reserved=0 oVirt Code of Conduct: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt .org%2Fcommunity%2Fabout%2Fcommunity-guidelines%2F&data=04%7C01%7C%7Ccdf df3baa30a417b631a08d92006eeac%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6 37576036430558160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMz IiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6pxtmPuppncwbn6Q3sRxYq%2Bd pbK68bZ1HV28qnxAf0w%3D&reserved=0 List Archives: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi rt.org%2Farchives%2Flist%2Fusers%40ovirt.org%2Fmessage%2F7VQ7CABK4FIP4SLPNNP EVZSCM6DTIUAD%2F&data=04%7C01%7C%7Ccdfdf3baa30a417b631a08d92006eeac%7C84 df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637576036430558160%7CUnknown%7CTWFp bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7 C1000&sdata=UxZ3oeiPqYUo1N6dvIAyUmlTPWv%2FG1FM0AMmF%2FLHmno%3D&reser ved=0

4 4

Removing Direct Mapped LUNs
by Ryan Chewning 16 Jul '21

16 Jul '21

Hi List, We need to add and remove directly mapped LUNs to multiple VMs in our Non-Production environment. The environment is backed by an iSCSI SAN. In testing when removing a directly mapped LUN it doesn't remove the underlying multipath and devices. Several questions. 1) Is this the expected behavior? 2) Are we supposed to go to each KVM host and manually remove the underlying multipath devices? 3) Is there a technical reason that oVirt doesn't do this as part of the steps to removing the storage? This is something that was handled by the manager in the previous virtualization that we used, Oracle's Xen based Oracle VM. Thanks! Ryan

5 11

upgrading gluster brick os from CentOS7 to 8
by Jiří Sléžka 07 Jul '21

07 Jul '21

Hello, I'm in progress of moving my oVirt HCI cluster to production. It was a bit complicated process because I had two new servers to install oVirt from scratch in the lab and three old servers with standalone kvm hypervisors in production. One of them (installed with CentOS7) was good enough to join HCI cluster. All three old kvm servers had production vms running on them. New cluster was installed with CentOS8 and oVirt4.4, I started with single node, then expanded it to two hosts with one another which acts as arbiter (just for stability in lab envirnment). After some testing and tuning I moved this two node cluster (without arbiter node) to my server housing. Then I prepared gluster brick on that one old server which I want reuse and join it to gluster storage so now it is replica 3 - two nodes are CentOS8 based and acts as oVirt hosts, one is CentOS7 and acts also as standalone kvm hypervisor. Then I migrated all vms from standalone kvm hypervisors to oVirt, then switched off two oldest hosts. Now I would like to reinstall CentOS7 node to oVirt host. My plan is to keep gluster brick fs and backup configuration and restore it after reinstall to CentOS8 as mentioned in https://mjanja.ch/2018/08/migrate-glusterfs-to-a-new-operating-system/. I want to speed up gluster healing. Does it make sense? Now the questin: Brick fs was created on CentOS7 and don't have new xfs features FINOBT,SPARSE_INODES,REFLINK. Could it be problem? Will be better to recreate fs in CentOS8 and then do full heal? I am afraid that it will take a long time and make big load to production hosts. TL;DR: Does gluster/oVirt4.4 make use of FINOBT,SPARSE_INODES,REFLINK xfs features? btw. oVirt is great product and HCI looks really functional and usable (with 10GE network and SSDsof course). Big thanks to developers and community! Cheers, Jiri

1 1

Re: Strange Issue with imageio
by Gianluca Cecchi 07 Jul '21

07 Jul '21

On Sat, Apr 17, 2021 at 6:27 AM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > Hi, > > > > Already submit *Bug 1950593* > <https://bugzilla.redhat.com/show_bug.cgi?id=1950593> for this issue. > > Thanks before. > > > > Regards, > > Nur Imam Febrianto > > > > It seems I have the same problem with my 4.4.5. Any info if it is fixed in the latest 4.4.6? It seems no update inside the bug page.. Gianluca

4 5

Re: How to Upgrade Node with Local Storage ?
by Vojtech Juranek 06 Jul '21

06 Jul '21

On Wednesday, 21 April 2021 16:40:29 CEST Nur Imam Febrianto wrote: > Set global maintenance and then turn off all vm, do yum update but it > completed with failed. Am I missing something ? can you share the details? What failed, wthat was the error? > From: Adam Xu<mailto:adam_xu@adagene.com.cn> > Sent: 20 April 2021 7:36 > To: users(a)ovirt.org<mailto:users@ovirt.org> > Subject: [ovirt-users] Re: How to Upgrade Node with Local Storage ? > > > For oVirt Node that using Local Storage, I think you should shutdown all > your vms before you upgrade the Node. 在 2021/4/19 22:09, Nur Imam Febrianto > 写道: > Hi, > > How we can upgrade oVirt Node that using Local Storage ? Seems I cant find > any good documentation about this. Planning to upgrade one 4.4.4 node with > local storage to 4.4.5. > Thanks before. > > Regards, > Nur Imam Febrianto > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > > To unsubscribe send an email to > users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> > > Privacy Statement: > https://www.ovirt.org/privacy-policy.html<https://apac01.safelinks.protecti > on.outlook.com/?url=https%3A%2F%2Fwww.ovirt.org%2Fprivacy-policy.html&data=0 > 4%7C01%7C%7C2817620cd2134104f81908d90394654e%7C84df9e7fe9f640afb435aaaaaaaaa > aaa%7C1%7C0%7C637544758156873163%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDA > iLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=VV663qDHl6C24C0 > XTZLoUF4n%2Bm4umP4dkG1EsKS895E%3D&reserved=0> > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/<https://apac01. > safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt.org%2Fcommunit > y%2Fabout%2Fcommunity-guidelines%2F&data=04%7C01%7C%7C2817620cd2134104f81908 > d90394654e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637544758156883118%7 > CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiL > CJXVCI6Mn0%3D%7C1000&sdata=XF1vC3JCyVjQCsD1x%2FDQinfKOImw5VJbZIryDg9sKKg%3D& > reserved=0> > > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZOCHCAJPXO4LT > IMA4JHK3WMR5CTKR37C/<https://apac01.safelinks.protection.outlook.com/?url=ht > tps%3A%2F%2Flists.ovirt.org%2Farchives%2Flist%2Fusers%40ovirt.org%2Fmessage% > 2FZOCHCAJPXO4LTIMA4JHK3WMR5CTKR37C%2F&data=04%7C01%7C%7C2817620cd2134104f819 > 08d90394654e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637544758156883118 > %7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw > iLCJXVCI6Mn0%3D%7C1000&sdata=raH9RGOWlZIWlj%2FCWFJUbqI94y0U2TR9lUukXhzi2B8%3 > D&reserved=0>

3 2

Libgfapi considerations
by Jayme 01 Jul '21

01 Jul '21

Are there currently any known issues with using libgfapi in the latest stable version of ovirt in hci deployments? I have recently enabled it and have noticed a significant (over 4x) increase in io performance on my vms. I’m concerned however since it does not seem to be an ovirt default setting. Is libgfapi considered safe and stable to use in ovirt 4.3 hci?

9 16

ovirt4.4 vm with windows 2008r2 bsod19
by grig.4n＠gmail.com 24 Jun '21

24 Jun '21

after migrate from ovirt4.1 to ovirt4.4 virtual mashines with windows 2008r2 bsod 0x00000019.

1 1

Import Ge0-Replicated Storage Domain fails
by simon＠justconnect.ie 22 Jun '21

22 Jun '21

Hi All, I have 2 independent Hyperconverged Sites/Data Centers. Site A has a GlusterFS Replica 3 + Arbiter Volume that is Storage Domain data2 This Volume is Geo-Replicated to a Replica 3 + Arbiter Volume at Site B called data2_bdt I have simulated a DR event and now want to import the Ge0-Replicated volume data2_bdt as a Storage Domain on Site B. Once imported I need to import the VMs on this volume to run in Site B. The Geo-Replication now works perfectly (thanks Strahil) but I haven't been able to import the Storage Domain. Please can someone point me in the right direction or documentation on how this can be achieved. Kind Regards Shimme...

6 9

Grafana oVirt 4.4.4 Node install - Grafana Monitoring Portal not available
by simon＠justconnect.ie 22 Jun '21

22 Jun '21

Having installed oVirt 4.4.4 HCI 3 node cluster, the Grafana 'Monitoring Portal' was not visible on the Default page. It appears that Grafana is installed but not configured. I have checked a 4.4.3 environment and it is installed and running, so is this a bug with 4.4.4.7-1.el8? Any help would be appreciated.

4 9

fresh ovirt node 4.4.6 fail on firewalld both host and engine deployment
by Charles Kozler 09 Jun '21

09 Jun '21

Hello - Deployed fresh ovirt node 4.4.6 and the only thing I did to the system was configure the NIC with nmtui During the gluster install the install errored out with gluster-deployment-1620832547044.log:failed: [n2] (item=5900/tcp) => {"ansible_loop_var": "item", "changed": false, "item": "5900/tcp", "msg": "ERROR: Exception caught: org.fedoraproject.FirewallD1.Exception: ALREADY_ENABLED: '5900:tcp' already in 'public' Permanent and Non-Permanent(immediate) operation"} The fix here was easy - I just deleted the port it was complaining about with firewall-cmd and restarted the installation and it was all fine During the hosted engine deployment when the VM is being deployed it dies here [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Open a port on firewalld] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "ERROR: Exception caught: org.fedoraproject.FirewallD1.Exception: ALREADY_ENABLED: '6900:tcp' already in 'public' Non-permanent operation"} Now the issue here is that I do not have access to the engine VM as it is in a bit of a transient state since when it fails the current image that is open is discarded when the ansible playbook is kicked off again I cannot find any BZ on this and google is turning up nothing. I don't think firewalld failing due to the firewall rule already existing should be a reason to exit the installation The interesting part is that this only fails on certain ports. i.e when I reran the gluster wizard after 5900 failed, the other ports are presumably still added to the firewall, and the installation completes Suggestions? -- *Notice to Recipient*: https://www.fixflyer.com/disclaimer <https://www.fixflyer.com/disclaimer>

5 6

I am installing ovirt engine 4.3.10
by ken＠everheartpartners.com 07 Jun '21

07 Jun '21

I am getting this error message when I install it on CentOS 7.9 when running the hosted engine setup. [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The selected network interface is not valid"} I have two interfaces enp6s0 enp11s0 Enp11s0 is the public network enp6s0 is the storage network to the netapp. Any idea how to resolve this?

3 2

Fedora CoreOS
by lejeczek 07 Jun '21

07 Jun '21

Hi guys. From what I gather there is no oVirt for Fedora CoreOS but I should ask here at the source - is it there oVirt for that OS and if there is not as of now, are the any plans or discussion to make that reality? many thanks, L.

2 1

Data Centers status Not Operational
by nexpron＠gmail.com 06 Jun '21

06 Jun '21

Hi everyone, I found 3 servers (HV1, HV2, HV3) that contains VMs at another servers room. These servers are hosts based on KVM. I logged into oVirt Engine Web Administration. Data Centers tab show me only one entry Name: RCV Storage: Shared Status: Not Operational Compability Version: 3.4 Description: [Empty] Webbrowser oVirt Engine Web Administrator show me oVirt Engine Version: 3.4.0-1.el6 One VM on HV3 has stopped, Hosts tab show Non Responsive Status for every host (HV1-3); every VM in Virtual Machines tab show Unknown status. What do I'll do to change status in Data Center? How to start debug the reason? Last administrator leave documentation in vestigial form :) DataCenter: RCV -->Cluster: RCV_Cluster ---->Host: HV1 node ---->Host: Hv2 node ---->Host: HV3 engine Best regards, nexpron

2 5

Hosted-engine fail and host reboot
by Dominique D 05 Jun '21

05 Jun '21

I tried with a 1 baremetal host, 3 baremetals or virtual hosts and I still have the same problem for installing the hosted-engine. Hyperconverge installs well. I have tried with multiple version of ovirt ISO file 4.4.1 and 4.4.4 and 4.4.6. when I run hosted-engine --deploy or with the cockpit, it creates a temporary VM in the 192.168.222.x subnet and I am able to connect in ssh on this temporary ip. When the script displays "TASK [ovirt.ovirt.hoted_engine_setup]: Wait for the host to be up" the server reboots and I have nothing left. problem when creation of the ovirtmgmt? here all my log https://drive.google.com/drive/folders/1kFFSlIqbjVwSN8t88aQZZR45DYEHPUvt?us… 021-05-26 10:15:09,135-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 TASK [ovirt.ovirt.hosted_engine_setup : Always revoke the SSO token] 2021-05-26 10:15:10,439-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:105 {'msg': "You must specify either 'url' or 'hostname'.", 'invocation': {'module_args': {'state': 'absent', 'ovirt_auth': {'changed': False, 'ansible_facts': {'ovirt_auth': {'token': 'Mz2onwB7qWX2x8HnJVgetQIQ9U4eVziRt8TEabfoizI2B98d0PDp-yxTU92a9lbun2vcr_i5yOXRsJKJKhqkVw', 'url': 'https://oe.telecom.lan/ovirt-engine/api', 'ca_file': None, 'insecure': True, 'timeout': 0, 'compress': True, 'kerberos': False, 'headers': None}}, 'failed': False, 'attempts': 1}, 'timeout': 0, 'compress': True, 'kerberos': False, 'url': None, 'hostname': None, 'username': None, 'password': None, 'ca_file': None, 'insecure': None, 'headers': None, 'token': None}}, '_ansible_no_log': False, 'changed': False} 2021-05-26 10:15:10,540-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:105 ignored: [localhost]: FAILED! => {"changed": false, "msg": "You must specify either 'url' or 'hostname'."} 2021-05-26 10:15:11,643-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] 2021-05-26 10:15:12,647-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 ok: [localhost] 2021-05-26 10:15:13,851-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] 2021-05-26 10:15:15,261-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 ok: [localhost] 2021-05-26 10:15:17,275-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:111 TASK [ovirt.ovirt.hosted_engine_setup : Wait for the host to be up] 2021-05-26 10:22:54,758-0400 ERROR otopi.context context._executeMethod:154 Failed to execute stage 'Closing up': SIG1 2021-05-26 10:22:54,762-0400 DEBUG otopi.context context.dumpEnvironment:765 ENVIRONMENT DUMP - BEGIN 2021-05-26 10:22:54,763-0400 DEBUG otopi.context context.dumpEnvironment:775 ENV BASE/error=bool:'True' 2021-05-26 10:22:54,763-0400 DEBUG otopi.context context.dumpEnvironment:775 ENV BASE/exceptionInfo=list:'[(<class 'RuntimeError'>, RuntimeError('SIG1',), <traceback object at 0x7fa8fc1ca1c8>)]' thank you

6 12

Adding a Ubuntu Host's NFS share to oVirt
by David White 04 Jun '21

04 Jun '21

Hello, Is it possible to use Ubuntu to share an NFS export with oVirt?I'm trying to setup a Backup Domain for my environment. I got to the point of actually adding the new Storage Domain. When I click OK, I see the storage domain appear momentarily before disappearing, at which point I get a message about oVirt not being able to obtain a lock. It appears I'm running into the issue described in this thread: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/BNVXUH5B26FBFC… ... Although the actual export is ext4, not xfs. From what I'm reading on that thread and elsewhere, it sounds like this problem is a result of SELinux not being present, is that correct? Is my only option here to install an OS that supports SELinux? Sent with ProtonMail Secure Email.

3 4

Can't remove snapshot
by David Johnson 04 Jun '21

04 Jun '21

Hi all, I patched one of my Windows VM's yesterday. I started by snapshotting the VM, then applied the Windows update. Now that the patch has been tested, I want to remove the snapshot. I get this message: Error while executing action: win-sql-2019: - Cannot remove Snapshot. The following attached disks are in ILLEGAL status: win-2019-tmpl_Disk1 - please remove them and try again. Does anyone have any thoughts how to recover from this? I really don't want to keep this snapshot hanging around. Thanks in advance, *David Johnson*

3 6

Cannot add new host to Ovirt
by pablo＠miami.edu 02 Jun '21

02 Jun '21

I have an Ovirt installation with a hosted engine and three hosts. Using Gluster as the storage for the VMs. Ovirt: 4.4.6.7 Hosts: CentOS Stream release 8 (updated to latest) So far so good. I am trying to add a new host to the cluster with the same OS and hardware as the others and I cannot get it to install, it gives me all kind of errors and it will not install. I reinstalled the OS and I am getting the same results. DNS is configured properly and working ok for all hosts. I can see this error in this log file ansible-runner-service.log: 2021-05-30 15:46:38,319 - runner_service.services.hosts - ERROR - SSH - NOAUTH:SSH auth error - passwordless ssh not configured for 'ovirt4' (sshd is configured exactly the same as all other hosts and I can login to this host without a password from the ovirt hosted engine) I see these errors in the log engine.log: 2021-05-30 16:22:35,166Z ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target 2021-05-30 16:22:35,175Z ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-32) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ovirt4.net.miami.edu command Get Host Capabilities failed: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target 2021-05-30 16:22:35,175Z ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-32) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target 2021-05-30 16:22:35,597Z ERROR [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-23) [] Error while refreshing server data for cluster 'Default' from database: null I tried reinstalling, rebooting, put it in maintenance, enroll the certificate, check for Upgrades, rebooted multiple times both the hosts and the ovirt engine: nothing works. What am I doing wrong? Thank you in advance for your help.

2 2

The self-hosted engine upgraded to 4.4.6 was not Stream 8.
by mail＠chattytak.com 01 Jun '21

01 Jun '21

I upgraded. The upgrade seems to have been successful. However, the distribution OS of the self-hosted engine did not change. # cat /etc/system-release CentOS Linux release 8.3.2011 Do I need to manually change my self-hosted engine distribution to Stream 8? I saw this URL for the version upgrade procedure. https://www.ovirt.org/documentation/upgrade_guide/index.html#Updates_betwee…

3 5

OSError: [Errno 24] Too many open files
by lejeczek 31 May '21

31 May '21

Hi guys I'm trying to install HE on a KVM host and installer cannot get pass this: [ ERROR ] OSError: [Errno 24] Too many open files [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "Unexpected failure during module execution.", "stdout": ""} [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine] [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "Using a SSH password instead of a key is not possible because Host Key checking is enabled and sshpass does not support this. Please add this host's fingerprint to your known_hosts file to manage this host."} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up KVM itself should be satisfying in terms of requirements, as a setup of a HE version from 'master' repo worked previously on it. Any ideas & thoughts shared, on what is that cryptic error message saying and how to troubleshoot I'll very much appreciate. many thanks, L.

2 5