July 2021 - Users - Ovirt List Archives

Re: Deployed self-hosted engine cannot be reached from network

by Fabrizio Vettore

[SOLVED] I installed a nested virtualization environment for testing, but I forgot to enable promiscuous mode on the VMware virtual switch. Unfortunately my brain was not correctly connected during configuration Sorry for wasting tour time :( Fabrizio Vettore ICT Manager --------------------------------------- Cifarelli Spa Strada Oriolo 180 27058 Voghera - Italy Lat. 45.006370 - Long. 9.010843

3 years, 6 months

1
0
1 / 0

Deployed self-hosted engine cannot be reached from network

by fabrizio.vettore＠cifarelli.it

Hi, oVirt Node 4.4.7 i i have just deployed self hosted engine using supplied wizard. Install ended without any error. Now.engine can reach ovirtnode (and viceversa) but cannot reach/be reached by external network. During install node ens192.6 network adapter have been moved to a newly created bridge ovirtmgmt. Bridge routing have been correctly set. Actually ovirtnode can reach external networks (and internet) so I assume routing is OK for the node. I can login to ovirtengine via SSH from ovirtnode (but not from outside) and i can ping/reach the note from ovirtengine but nothing other, even on the some subnet (I have other 2 nodes instaled with adiacent addresses) Routing on the engine is OK (same gateway than node) Tried to redeploy with the same result. Probably it is a a stupid problem but I cannot figure out how to solve it! Any suggestion? Thanks in advance Fabrizio

3 years, 6 months

2
1
0 / 0

Deployed self-hosted engine cannot be reached from network

by fabrizio.vettore＠cifarelli.it

Hi, oVirt Node 4.4.7 i i have just deployed self hosted engine using supplied wizard. Install ended without any error. Now.engine can reach ovirtnode (and viceversa) but cannot reach/be reached by external network. During install node ens192.6 network adapter have been moved to a newly created bridge ovirtmgmt. Bridge routing have been correctly set. Actually ovirtnode can reach external networks (and internet) so I assume routing is OK for the node. I can login to ovirtengine via SSH from ovirtnode (but not from outside) and i can ping/reach the note from ovirtengine but nothing other, even on the some subnet (I have other 2 nodes instaled with adiacent addresses) Routing on the engine is OK (same gateway than node) Tried to redeploy with the same result. Probably it is a a stupid problem but I cannot figure out how to solve it! Any suggestion? Thanks in advance Fabrizio

3 years, 6 months

1
0
0 / 0

Multiple gateway not working after "big update"

by Lionel Caignec

Hi, i've just tried to update my sandboxing environmnent after long time without update (i know it's bad...) and i'm facing a problem with multiple gateway. This environment work with 6 hypervisors (centos 8) and one manager on dedicated server, all this baremetal have 2 interface in 2 différent network protected by firewall. All my hypervisords have 2 network for ovirt, one "ovirtmgmt" for management (only SSH and internal admin stuff), the other "ovir_prod" for console, migration, and default gateway. I've 3 hypervisors non updated which i can ping /ssh / ... (according to iptables) on the two interface without problem. But the 3 hypervisors just updated are accessible only on the "ovirt_prod" interface. I'm looking inside ip route/ ip rules it seems to miss something. I always configured my HV by ovirt gui so i does not understand what going wrong. This is ip route/ip rules of my hv, it's like missing ip rules on non working HV The "route-ovirt_prod" file that does not exist on old HV. Working HV (centos 8.3 / vdsm 4.20.26.3-1) : [root@drogo ~]# ip ru 0: from all lookup local 32000: from 10.100.126.0/24 lookup 174358038 32000: from all to 10.100.126.0/24 iif ovirtmgmt lookup 174358038 32000: from 10.5.7.0/24 lookup 168101654 32000: from all to 10.5.7.0/24 iif comte_prod lookup 168101654 32766: from all lookup main 32767: from all lookup default [root@drogo ~]# ip rou default via 10.5.7.254 dev comte_prod proto static metric 425 10.5.7.0/24 dev comte_prod proto kernel scope link src 10.5.7.22 metric 425 10.100.126.0/24 dev ovirtmgmt proto kernel scope link src 10.100.126.22 metric 426 Bugged HV (centos 8.4/ vdsm 4.40.70.6-1) [root@balbo ~]# ip ru 0: from all lookup local 32766: from all lookup main 32767: from all lookup default [root@balbo ~]# ip rou default via 10.5.7.254 dev comte_prod proto static metric 425 10.5.6.0/26 dev enp4s0f1 proto kernel scope link src 10.5.6.6 metric 100 linkdown 10.5.7.0/24 dev comte_prod proto kernel scope link src 10.5.7.25 metric 426 10.100.126.0/24 dev ovirtmgmt proto kernel scope link src 10.100.126.25 metric 425 [root@bingo network-scripts]# cat route-ovirt_prod ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=10.5.7.254 OPTIONS0="table 254" METRIC0=431 Than you for help :) -- Lionel Caignec

3 years, 6 months

2
6
0 / 0

Re: oVirt and ARM

by Marko Vrgotic

Hi Sandro and the rest of oVirt gurus, My managers are positive regarding helping provide some ARM hardware, but it would not happened earlier than three months from now, as we are in process of establishing certain relationship with ARM HW vendor. In the meantime, I was asked to check if in current 4.4 version or coming 4.5, are/will there any capabilities or options of emulating aarch64 on x86_64 platform and if so, what would be the steps to test/enable it. Kindly awaiting your reply. Marko Vrgotic From: Marko Vrgotic <M.Vrgotic(a)activevideo.com> Date: Monday, 28 June 2021 at 15:38 To: Sandro Bonazzola <sbonazzo(a)redhat.com>, Evgheni Dereveanchin <ederevea(a)redhat.com> Cc: Zhenyu Zheng <zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, users(a)ovirt.org <users(a)ovirt.org> Subject: Re: [ovirt-users] oVirt and ARM Hi Sandro, I will check with my managers if we have and could spare some hardware to contribute developing for oVirt. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Sandro Bonazzola <sbonazzo(a)redhat.com> Date: Friday, 25 June 2021 at 15:26 To: Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Evgheni Dereveanchin <ederevea(a)redhat.com> Cc: Zhenyu Zheng <zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, users(a)ovirt.org <users(a)ovirt.org> Subject: Re: [ovirt-users] oVirt and ARM ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** Il giorno ven 25 giu 2021 alle ore 14:20 Marko Vrgotic <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha scritto: Hi Sandro, Thank you for the update. I am not equipped to help on development side, but I can most certainly do test deployments, once there is something available. We are big oVirt shop and moving to ARM64 with new product, it would be great if oVirt would start supporting it. If we are able to help somehow, let me know. I guess a start could be adding some arm64 machine to oVirt infrastructure so developers can build for it. You can have a look at https://ovirt.org/community/get-involved/donate-hardware.html<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.o...> Looping in +Evgheni Dereveanchin<mailto:ederevea@redhat.com> in case you can share some resources. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Sandro Bonazzola <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>> Date: Thursday, 24 June 2021 at 18:21 To: Marko Vrgotic <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>>, Zhenyu Zheng <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, Joey Ma <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>> Cc: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: Re: [ovirt-users] oVirt and ARM ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** Il giorno gio 24 giu 2021 alle ore 16:34 Marko Vrgotic <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha scritto: Hi oVirt, Where can I find if there are any information about oVirt supporting arm64 CPU architecture? Right now oVirt is not supporting arm64. There was an initiative about supporting it started some time ago from openEuler ovirt SIG. I didn't got any further updates on this topic, looping in those who I remember being looking into it. I think that if someone contributes arm64 support it would also be a feature worth a 4.5 release :-) ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQ3XND2NKIL...<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.o...> -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> Error! Filename not specified.<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> [https://static.redhat.com/libs/redhat/brand-assets/2/corp/logo--200.png]<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.

3 years, 6 months

1
0
0 / 0

[ANN] Async ovirt-hosted-engine-setup release for oVirt 4.4.7

by Sandro Bonazzola

On July 9th 2021 the oVirt project released an async update to the following packages: - ovirt-hosted-engine-setup-2.5.2 Fixing the following bugs: - Bug 1978365 <https://bugzilla.redhat.com/show_bug.cgi?id=1978365> - hosted-engine --console fails on socat "Option "user" only with bind option" error The bug affects CentOS Stream based systems, no update needed on RHEL 8.4 and derivatives. For oVirt Node users: an oVirt Node respin will be issued consuming this fix as soon as the following bug will be fixed: - Bug 1979624 <https://bugzilla.redhat.com/show_bug.cgi?id=1979624> - imgbase should not copy selinux binary policy file -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 years, 6 months

1
0
0 / 0

Re: Q: Node Upgrade Path

by Andrei Verovski

> On 9 Jul 2021, at 01:37, Matthew.Stier(a)fujitsu.com wrote: > > You need to go in steps. > > https://www.ovirt.org/documentation/upgrade_guide/ My nodes run on natively installed CentOS, not factory oVirt node images, because of necessary RAID drivers and custom scripts (for example, in case of power failure which is over 5 min they loop through all running VMS and shutdown them gracefully, then shutdown node itself, + RAID monitoring script which sends notifications on Telegram messenger). This seem to be my case. Anyone from oVirt team can confirm? Thanks. https://www.ovirt.org/documentation/upgrade_guide/#Manually_Updating_Host... > > -----Original Message----- > From: Andrei Verovski <andreil1(a)starlett.lv> > Sent: Thursday, July 8, 2021 2:52 PM > To: users(a)ovirt.org > Cc: Stier, Matthew <Matthew.Stier(a)fujitsu.com> > Subject: Re: [ovirt-users] Q: Node Upgrade Path > > Hi, > > OK, thanks for the tip. > I always upgraded nodes via oVirt web interface, which is now 4.4.7, and I assume it can't update node 4.2 -> 4.3, because 4.3 is too old. Please correct if I'm wrong here. > > May I use these commands to safely upgrade nodes manually? > > yum check-update > yum clean all > yum update > yum remove ovirt-release42 > yum install > https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-im... > > On 7/8/21 8:41 PM, Matthew.Stier(a)fujitsu.com wrote: >> If the hardware is old, and won't support EL8, the best option is to update to oVirt 4.3.10 and update CentOS to 7u9. >> >> Some of my systems have megaraid sas2 raid controllers, which Red Hat have stopped supporting, and all the variant have followed suit. >> >> I have tried the Elrepo DUD's to work around the problem, but my results (in the 4.4.1/4.4.2 timeframe) were not satisfactory. >> >> -----Original Message----- >> From: Andrei Verovski <andreil1(a)starlett.lv> >> Sent: Thursday, July 8, 2021 6:42 AM >> To: users(a)ovirt.org >> Subject: [ovirt-users] Q: Node Upgrade Path >> >> Hi, >> >> >> I have 2 oVirt nodes still running on CentOS 7.6. >> rpm -qa | grep ovirt - results in version 4.2. >> >> Does it makes sense to upgrade CentOS 7.6 to Stream, and then upgrade oVirt Node sw, or just leave for a couple of years till hardware will be trashed? >> I’m always keep oVirt Engine up to date, so my only concern if at any point it will stop support old Node sw. >> >> Thanks in advance for any suggestion. >> Andrei >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org Privacy >> Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/6SCBZF3N >> ASM5UIABKRANHI6UUHXCWG4Y/ >

3 years, 6 months

1
0
0 / 0

Is there any way to get the PDF files of the oVirt user docs such as Administrator Guide ?

by tommy

Thanks!

3 years, 6 months

1
0
0 / 0

Re: Q: Node Upgrade Path

by Andrei Verovski

Hi, OK, thanks for the tip. I always upgraded nodes via oVirt web interface, which is now 4.4.7, and I assume it can't update node 4.2 -> 4.3, because 4.3 is too old. Please correct if I'm wrong here. May I use these commands to safely upgrade nodes manually? yum check-update yum clean all yum update yum remove ovirt-release42 yum install https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-im... On 7/8/21 8:41 PM, Matthew.Stier(a)fujitsu.com wrote: > If the hardware is old, and won't support EL8, the best option is to update to oVirt 4.3.10 and update CentOS to 7u9. > > Some of my systems have megaraid sas2 raid controllers, which Red Hat have stopped supporting, and all the variant have followed suit. > > I have tried the Elrepo DUD's to work around the problem, but my results (in the 4.4.1/4.4.2 timeframe) were not satisfactory. > > -----Original Message----- > From: Andrei Verovski <andreil1(a)starlett.lv> > Sent: Thursday, July 8, 2021 6:42 AM > To: users(a)ovirt.org > Subject: [ovirt-users] Q: Node Upgrade Path > > Hi, > > > I have 2 oVirt nodes still running on CentOS 7.6. > rpm -qa | grep ovirt - results in version 4.2. > > Does it makes sense to upgrade CentOS 7.6 to Stream, and then upgrade oVirt Node sw, or just leave for a couple of years till hardware will be trashed? > I’m always keep oVirt Engine up to date, so my only concern if at any point it will stop support old Node sw. > > Thanks in advance for any suggestion. > Andrei > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6SCBZF3NASM...

3 years, 6 months

2
1
0 / 0

Clear task after export to ova unfinisced

by radchenko.anatoliy＠gmail.com

Hi all, after succesfully done ova export of 120gb VM i launched export ova of 250gb vm but it is not finished. The time of task must be about 20 minuts. Now i have one unfinished task and locked vm. I know that it is complex task indluding a series of steps and clean db of task manually is not resolved it. Some info: Gluster replica 3 hiperconverged configuration [root@cluster23 ~]# vdsm-client Host getAllTasksInfo {} tail -f engine.log 2021-07-08 20:55:13,187+02 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-45) [0b76403b-c111-4eca-ab6f-d0f72705be4b] Command 'CreateOva' (id: 'b9edc8f6-c3b2-4e9a-be01-5ef15b64eb68') waiting on child command id: 'b10835e3-b5fd-4d08-b499-5fdb309ae18b' type:'AnsiblePackOva' to complete 2021-07-08 20:55:15,215+02 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-21) [0b76403b-c111-4eca-ab6f-d0f72705be4b] Command 'ExportVmToOva' (id: '25dea23a-ac1e-4258-a71e-90e696c16c27') waiting on child command id: 'b9edc8f6-c3b2-4e9a-be01-5ef15b64eb68' type:'CreateOva' to complete Any suggestions? Thanks in advance. Best regards.

3 years, 6 months

2
2
0 / 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users July 2021