data storage domain iso upload problem
by csabany@freemail.hu
Hi,
I managed a ovirt 4.4.7 for production systems.
Last week i removed the Master storage domain (moved tamplates, vm-s well, unattached, etc), but i forgot to move isos.
Now, when i upload a new iso to a data storage domain, the system show it, but it's unbootable:
"could not read from cdrom code 0005"
thanks
csabany
2 years, 7 months
Change Cluster CPU type
by Andrey Rusakov
We are using oVirt for several years.
And we start with Xeon v2 CPUs.
At this moment of time we got all v3 aтв we will chnage them to v4 in a month.
So i would like to change Cluster default CPU to Haswell, But got error with custom cpu on HostedEngine.
HostedEngine config is locked.
Is there a solution to chnage HostedEngine cpu type?
P.S. some problem with Cluster compability version (4.5 4.6)
2 years, 7 months
NFS storage was locked for 45 minutes after I attempted a clone operation
by David White
I have an HCI cluster running on Gluster storage. I exposed an NFS share into oVirt as a storage domain so that I could clone all of my VMs (I'm preparing to move physically to a new datacenter). I got 3-4 VMs cloned perfectly fine yesterday. But then this evening, I tried to clone a big VM, and it caused the disk to lock up. The VM went totally unresponsive, and I didn't see a way to cancel the clone. Nagios NRPE (on the client VM) was reporting server load over 65+, but I was never able to establish an SSH connection.
Eventually, I tried restarting the ovirt-engine, per https://access.redhat.com/solutions/396753. When that didn't work, I powered down the VM completely. But the disks were still locked. So I then tried to put the storage domain into maintenance mode, but that wound up putting the entire domain into a "locked" state. Finally, eventually, the disks unlocked, and I was able to power the VM back online.
From start to finish, my VM was down for about 45 minutes, including the time when NRPE was still sending data to Nagios.
What logs should I look at, and how can I troubleshoot what went wrong here, and hopefully avoid this from happening again?
Sent with ProtonMail Secure Email.
2 years, 7 months
Template for Ubuntu 18.04 Server Issues
by jeremy_tourville@hotmail.com
I have built a system as a template on oVirt. Specifically, Ubuntu 18.04 server.
I am noticing an issue when creating new vms from that template. I used the check box for "seal template" when creating the template.
When I create a new Ubuntu VM I am getting duplicate IP addresses for all the machines created from the template.
It seems like the checkbox doesn't fully function as intended. I would need to do further manual steps to clear up this issue.
Has anyone else noticed this behavior? Is this expected or have I missed something?
Thanks for your input!
2 years, 7 months
Re: Import OVA problem
by Dominique Deschênes
Hi Saif,
Here the error in engine.log
2021-08-31 10:22:26,536-04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-8) [82b7a8d4-15d1-4553-94e5-34506d174ac4] EVENT_ID: ANSIBLE_RUNNER_EVENT_NOTIFICATION(559), Query OVA info. Run query script.
2021-08-31 10:22:29,640-04 ERROR [org.ovirt.engine.core.utils.ovf.OvfManager] (default task-8) [82b7a8d4-15d1-4553-94e5-34506d174ac4] Error parsing OVF due to Error loading ovf, message The element type "SpecParams" must be terminated by the matching end-tag "</SpecParams>".
2021-08-31 10:22:29,662-04 ERROR [org.ovirt.engine.core.utils.ovf.OvfManager] (default task-8) [82b7a8d4-15d1-4553-94e5-34506d174ac4] Error parsing OVF due to Error loading ovf, message The element type "SpecParams" must be terminated by the matching end-tag "</SpecParams>".
2021-08-31 10:22:30,694-04 ERROR [org.ovirt.engine.core.utils.ovf.OvfManager] (default task-8) [82b7a8d4-15d1-4553-94e5-34506d174ac4] Error parsing OVF due to Error loading ovf, message XML document structures must start and end within the same entity.
And my ansible log file
https://drive.google.com/file/d/1qnd-Ut1tHr5X3jrKcsPsxOz8ObPTuQ7v/view?us...
Dominique
----- Original Message -----
From: Saif Abu Saleh (sabusale(a)redhat.com)
Date: 31/08/21 09:54
To: Dominique D (dominique.deschenes(a)gcgenicom.com)
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Import OVA problem
Hi Dominique,
Hope you are doing well
In order to investigate this, we need to check the log files
Can you please try to do import again and provide the following log files after the import:
- engine.log, from location: <deployment_location>/var/log/ovirt-engine/engine.log
- ansible log file (depending on the time of the import), from location: <deployment_location>/var/log/ovirt-engine/ova
Thanks,
Saif
On Sun, Aug 29, 2021 at 6:08 PM Dominique D <dominique.deschenes(a)gcgenicom.com> wrote:
I have tried exporting 4 VMs (2 centos and 2 Windows) to an nfs mount (export OVA) and importing from ova and I can't see all the files.
Here are the files in the directory
-rw-------+ 1 root root 10739331584 Aug 29 10:27 linux2.ova
-rw-------+ 1 root root 1784370176 Aug 28 12:00 linuxtest.ova
-rw-------+ 1 root root 64434655232 Aug 28 13:57 vdiw10-2004v1C.ova
-rw-------+ 1 vdsm kvm 49040712192 Aug 27 17:21 vdiw10rg06.ova
The only file I see in virtual machine on source is linuxtest.ova and linux2.ova. Do you know why ?
ovirt 4.4.6
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3TX6YKUG56O...
2 years, 7 months
Re: Ovirt-4.4.7 Adding host to existing cluster will attempt to run ovirt-hosted-engine-setup
by Paul-Erik Törrönen
On 2021-08-17 11:12, Dana Elfassy wrote:
> The execution of the task itself is fine - we're always installing this
> package because of dependencies.
> As for its failure- looks like an issue with the repositories.
> Please run $ yum repolist
> on the host and copy the output
Sorry for replying so late, was on a 2-week road-trip.
$ yum repolist
repo id
repo name
appstream
CentOS Stream 8 - AppStream
baseos
CentOS Stream 8 - BaseOS
elasticsearch-7.x
Elasticsearch repository for 7.x
packages
epel-next
Extra Packages for Enterprise
Linux 8 - Next - x86_64
extras
CentOS Stream 8 - Extras
ovirt-4.4
Latest oVirt 4.4 Release
ovirt-4.4-centos-ceph-pacific
Ceph packages for x86_64
ovirt-4.4-centos-gluster8
CentOS-8 - Gluster 8
ovirt-4.4-centos-opstools
CentOS-8 - OpsTools - collectd
ovirt-4.4-centos-stream-advanced-virtualization
Advanced Virtualization CentOS
Stream packages for x86_64
ovirt-4.4-centos-stream-nfv-openvswitch
CentOS-8 - NFV OpenvSwitch
ovirt-4.4-centos-stream-ovirt44
CentOS-8 Stream - oVirt 4.4
ovirt-4.4-copr:copr.fedorainfracloud.org:mdbarroso:ovsdbapp
Copr repo for ovsdbapp owned by
mdbarroso
ovirt-4.4-copr:copr.fedorainfracloud.org:sac:gluster-ansible
Copr repo for gluster-ansible
owned by sac
ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection
Copr repo for EL8_collection
owned by sbonazzo
ovirt-4.4-epel
Extra Packages for Enterprise
Linux 8 - x86_64
ovirt-4.4-openstack-train
OpenStack Train Repository
ovirt-4.4-virtio-win-latest
virtio-win builds roughly
matching what will be shipped in upcoming RHEL
powertools
CentOS Stream 8 - PowerTools
Then there's also this:
$ dnf update
Last metadata expiration check: 0:28:17 ago on Tue 31 Aug 2021 12:45:32
PM EEST.
Error:
Problem 1: cannot install the best update candidate for package
ovirt-host-dependencies-4.4.7-1.el8.x86_64
- nothing provides python3-os-brick needed by
ovirt-host-dependencies-4.4.8-1.el8.x86_64
Problem 2: package ovirt-host-4.4.8-1.el8.x86_64 requires
ovirt-host-dependencies = 4.4.8-1.el8, but none of the providers can be
installed
- cannot install the best update candidate for package
ovirt-host-4.4.7-1.el8.x86_64
- nothing provides python3-os-brick needed by
ovirt-host-dependencies-4.4.8-1.el8.x86_64
Poltsi
2 years, 7 months
ovirt go sdk
by Nikita Zubarev
Hello.
I need help creating a virtual machine using
https://github.com/oVirt/go-ovirt
I need set cmdline vm , Please help me
my create vm configuration, but cmd not set
[image: image.png]
Vm(
ovirtsdk4.NewVmBuilder().
Name(*name).
Console(
ovirtsdk4.NewConsoleBuilder().
Enabled(true).
MustBuild()).
Memory(ram2 * int64(1<<30)).
MemoryPolicy(
ovirtsdk4.NewMemoryPolicyBuilder().
Guaranteed(int64(ram2) * int64(1<<30)).
Max(int64(ram2) * 2 * int64(1<<30)).
Ballooning(true).
MustBuild()).
// Memory(int64(ram2) * int64(1<<30)).
Os(
ovirtsdk4.NewOperatingSystemBuilder().
CustomKernelCmdline("qemu_cmdline").Cmdline("qemu_cmdline").Boot(
ovirtsdk4.NewBootBuilder().
DevicesOfAny(
ovirtsdk4.BOOTDEVICE_NETWORK,
ovirtsdk4.BOOTDEVICE_HD).
MustBuild()).
MustBuild()).
HighAvailability(
ovirtsdk4.NewHighAvailabilityBuilder().
Enabled(true).
MustBuild()).
Cpu(
ovirtsdk4.NewCpuBuilder().
Topology(
ovirtsdk4.NewCpuTopologyBuilder().
Cores(cpu2).
Sockets(1).
MustBuild()).
MustBuild()).
Cluster(
ovirtsdk4.NewClusterBuilder().
Name(Cluster).
MustBuild()).
Template(
ovirtsdk4.NewTemplateBuilder().
Name("Blank").
MustBuild()).
MustBuild()).
Send()
2 years, 7 months
Re: [External] : Re: about the hugepage setting of the KVM server
by Tommy Sway
I use the ovirt-node, and I configured HUGEPAGE on the VM, and does not
configure the HUGEPAGE on the KVM host.
The THP I don't configure anything about it, and after configure the
HUGEPAGE on the vm, there is no report.
I don't know which method is the best.
From: Marcos Sungaila <marcos.sungaila(a)oracle.com>
Sent: Thursday, August 26, 2021 9:13 PM
To: Tommy Sway <sz_cuitao(a)163.com>; users(a)ovirt.org
Subject: RE: [External] : [ovirt-users] Re: about the hugepage setting of
the KVM server
Hi Tommy,
I have no simple answer to your question since I did not need this before,
but some questions may help us understand how it is currently working.
1st- Are you using an ovirt-node or an OS+vdsm as a hypervisor?
2nd- Did you enabled huge pages on the VM OS?
3rd- Did you check on the hypervisor OS if transparent hugepages (THP) is
enabled? And if, after enabling/configuring hugepages in the VM, it is
reporting hugepages are in use in the host?
Marcos
From: Tommy Sway <sz_cuitao(a)163.com <mailto:sz_cuitao@163.com> >
Sent: quinta-feira, 26 de agosto de 2021 04:49
To: users(a)ovirt.org <mailto:users@ovirt.org>
Subject: [External] : [ovirt-users] Re: about the hugepage setting of the
KVM server
Anyone can help me ?
From: users-bounces(a)ovirt.org <mailto:users-bounces@ovirt.org>
<users-bounces(a)ovirt.org <mailto:users-bounces@ovirt.org> > On Behalf Of
Tommy Sway
Sent: Thursday, August 26, 2021 12:27 AM
To: users(a)ovirt.org <mailto:users@ovirt.org>
Subject: [ovirt-users] about the hugepage setting of the KVM server
Hi:
I am running virtual machines on the KVM servers of oVirt env. The virtual
machine is running database, which needs to set the memory huge page on the
OPERATING system of the virtual machine.
If I need to set the huge page on the VIRTUAL machine, do I also need to set
huge page on the KVM physical machine? Or just on the virtual machine?
What best practices do you recommend?
Thank you very much!
2 years, 7 months
Unable to export VM from data storage domain.
by Diggy Mc
I'm running oVirt 4.4.4 with two data storage domains. One domain is where the production VMs run. The second domain is where I make backup copies of the VMs in the event of problems with the main production VMs. I make backups using the export option from the GUI's dropdown list.
I just now tried to "restore" a backup copy via the export function and get an error. In fact, I get errors trying to export (import to my original data domain) any of the VMs that were exported to my backup data domain. My backup domain is a DATA domain and not an EXPORT domain.
The exact error is:
Export VM Failed
[Cannot add VM. Cannot find a disk profile defined on storage domain 246c69e9-6f16-489f-8022-8613f6c1c22a.]
Is this a bug or am I doing something wrong? Help is needed urgently. In advance, thank you.
2 years, 7 months