May 2022 - Users - oVirt List Archives

Single-machine hosted-engine routing is not working
by Paul-Erik Törrönen 26 May '22

26 May '22

Hello, I have oVirt 4.4 (latest that can be installed on RockyLinux 8.5) running on a laptop with a self-hosted engine. The setup was working fine after installation, but once I rebooted (after having shut down all the VMs including the hosted engine), I can no longer reach the oVirt console from any other computer on the same subnet. The hosted engine does respond to ping from the host machine. Logging onto the hosted engine from the serial console and I can only ping the host machine. Any other address on the subnet is unreachable. This seems to be some internal oVirt routing issue between the host and the virtual machine since stopping the firewall service makes no difference, neither on the host nor the hosted engine. The host address is 192.168.42.2 and the hosted engine is 192.168.42.250. broker.log says: engine_health::246::engine_health.EngineHealth::(_result_from_stats) VM is up on this host with healthy engine cpu_load_no_engine::142::cpu_load_no_engine.CpuLoadNoEngine::(calculate_load) System load total=0.0250, engine=0.0028, non-engine=0.0222 network::88::network.Network::(action) Successfully verified network status mem_free::51::mem_free.MemFree::(action) memFree: 26884 mgmt_bridge::65::mgmt_bridge.MgmtBridge::(action) Found bridge ovirtmgmt in up state engine_health::246::engine_health.EngineHealth::(_result_from_stats) VM is up on this host with healthy engine agent.log says: states::406::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost hosted_engine::517::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state EngineUp (score: 3400) ovn-controller.log says: reconnect|INFO|ssl:192.168.42.250:6642: connected ofctrl|INFO|unix:/var/run/openvswitch/br-int.mgmt: connecting to switch rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: connecting... rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: connected pinctrl(ovn_pinctrl0)|INFO|unix:/var/run/openvswitch/br-int.mgmt: connecting to switch rconn(ovn_pinctrl0)|INFO|unix:/var/run/openvswitch/br-int.mgmt: connecting... rconn(ovn_pinctrl0)|INFO|unix:/var/run/openvswitch/br-int.mgmt: connected ovs-vswitchd.log says: connmgr|INFO|br-int: added service controller "punix:/var/run/openvswitch/br-int.mgmt" bridge|INFO|ovs-vswitchd (Open vSwitch) 2.11.8 memory|INFO|68900 kB peak resident set size after 10.0 seconds memory|INFO|handlers:5 ofconns:2 ports:1 revalidators:3 rules:9 connmgr|INFO|br-int<->unix#0: 6 flow_mods 10 s ago (5 adds, 1 deletes) The only actual error on the host is in ovsdb-server.log: jsonrpc|WARN|unix#13: receive error: Connection reset by peer reconnect|WARN|unix#13: connection dropped (Connection reset by peer) What else should I look at in order to figure out why the host no longer routes packets correctly from and to the hosted engine? Poltsi

2 2

oVirt Node 4.5.0.3 Async update
by Lev Veyde 25 May '22

25 May '22

On May 25th 2022 the oVirt project released an async update of oVirt Node (4.5.0.3) delivering several bug fixes and enhancements. The update is already available on resources.ovirt.org and should land on oVirt mirrors within 24 hours. Important fix: - https://github.com/oVirt/ovirt-node-ng-image/issues/51 imgbased dependency causes upgrade issues Many thanks to Jean-Louis Dupond for his reports. Updates: - GlusterFS 10.2: https://github.com/gluster/glusterfs/blob/release-10/doc/release-notes/10.2… - Ceph 16.2.9: https://ceph.io/en/news/blog/2022/v16-2-9-pacific-released/ - Ansible Core 2.12.5: https://github.com/ansible/ansible/blob/stable-2.12/changelogs/CHANGELOG-v2… oVirt Node has been updated, including: - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Node 4.5.0.2: ovirt-node-ng-image-4.5.0.2 ovirt-node-ng-image-4.5.0.3 NetworkManager 1.39.2-2.el8 1.39.3-1.el8 NetworkManager-config-server 1.39.2-2.el8 1.39.3-1.el8 NetworkManager-libnm 1.39.2-2.el8 1.39.3-1.el8 NetworkManager-ovs 1.39.2-2.el8 1.39.3-1.el8 NetworkManager-team 1.39.2-2.el8 1.39.3-1.el8 NetworkManager-tui 1.39.2-2.el8 1.39.3-1.el8 ansible-core 2.12.3-1.el8 2.12.5-1.el8 audispd-plugins 3.0.7-3.el8 3.0.7-4.el8 audit 3.0.7-3.el8 3.0.7-4.el8 audit-libs 3.0.7-3.el8 3.0.7-4.el8 ceph-common 16.2.7-1.el8s 16.2.9-1.el8s cups-libs 2.2.6-44.el8 2.2.6-45.el8 device-mapper-multipath 0.8.4-22.el8 0.8.4-23.el8 device-mapper-multipath-libs 0.8.4-22.el8 0.8.4-23.el8 dnf 4.7.0-8.el8 4.7.0-9.el8 dnf-data 4.7.0-8.el8 4.7.0-9.el8 expat 2.2.5-8.el8 2.2.5-9.el8 fence-agents-all 4.2.1-93.el8 4.2.1-94.el8 fence-agents-amt-ws 4.2.1-93.el8 4.2.1-94.el8 fence-agents-apc 4.2.1-93.el8 4.2.1-94.el8 fence-agents-apc-snmp 4.2.1-93.el8 4.2.1-94.el8 fence-agents-bladecenter 4.2.1-93.el8 4.2.1-94.el8 fence-agents-brocade 4.2.1-93.el8 4.2.1-94.el8 fence-agents-cisco-mds 4.2.1-93.el8 4.2.1-94.el8 fence-agents-cisco-ucs 4.2.1-93.el8 4.2.1-94.el8 fence-agents-common 4.2.1-93.el8 4.2.1-94.el8 fence-agents-compute 4.2.1-93.el8 4.2.1-94.el8 fence-agents-drac5 4.2.1-93.el8 4.2.1-94.el8 fence-agents-eaton-snmp 4.2.1-93.el8 4.2.1-94.el8 fence-agents-emerson 4.2.1-93.el8 4.2.1-94.el8 fence-agents-eps 4.2.1-93.el8 4.2.1-94.el8 fence-agents-heuristics-ping 4.2.1-93.el8 4.2.1-94.el8 fence-agents-hpblade 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ibmblade 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ifmib 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ilo-moonshot 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ilo-mp 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ilo-ssh 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ilo2 4.2.1-93.el8 4.2.1-94.el8 fence-agents-intelmodular 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ipdu 4.2.1-93.el8 4.2.1-94.el8 fence-agents-ipmilan 4.2.1-93.el8 4.2.1-94.el8 fence-agents-kdump 4.2.1-93.el8 4.2.1-94.el8 fence-agents-mpath 4.2.1-93.el8 4.2.1-94.el8 fence-agents-redfish 4.2.1-93.el8 4.2.1-94.el8 fence-agents-rhevm 4.2.1-93.el8 4.2.1-94.el8 fence-agents-rsa 4.2.1-93.el8 4.2.1-94.el8 fence-agents-rsb 4.2.1-93.el8 4.2.1-94.el8 fence-agents-sbd 4.2.1-93.el8 4.2.1-94.el8 fence-agents-scsi 4.2.1-93.el8 4.2.1-94.el8 fence-agents-vmware-rest 4.2.1-93.el8 4.2.1-94.el8 fence-agents-vmware-soap 4.2.1-93.el8 4.2.1-94.el8 fence-agents-wti 4.2.1-93.el8 4.2.1-94.el8 glibc 2.28-199.el8 2.28-200.el8 glibc-common 2.28-199.el8 2.28-200.el8 glibc-langpack-en 2.28-199.el8 2.28-200.el8 glusterfs 10.1-1.el8s 10.2-1.el8s glusterfs-cli 10.1-1.el8s 10.2-1.el8s glusterfs-client-xlators 10.1-1.el8s 10.2-1.el8s glusterfs-events 10.1-1.el8s 10.2-1.el8s glusterfs-fuse 10.1-1.el8s 10.2-1.el8s glusterfs-geo-replication 10.1-1.el8s 10.2-1.el8s glusterfs-server 10.1-1.el8s 10.2-1.el8s kexec-tools 2.0.20-68.el8 2.0.24-1.el8 kpartx 0.8.4-22.el8 0.8.4-23.el8 krb5-libs 1.18.2-17.el8 1.18.2-20.el8 krb5-workstation 1.18.2-17.el8 1.18.2-20.el8 libcephfs2 16.2.7-1.el8s 16.2.9-1.el8s libdnf 0.63.0-8.el8 0.63.0-9.el8 libgfapi0 10.1-1.el8s 10.2-1.el8s libgfchangelog0 10.1-1.el8s 10.2-1.el8s libgfrpc0 10.1-1.el8s 10.2-1.el8s libgfxdr0 10.1-1.el8s 10.2-1.el8s libglusterd0 10.1-1.el8s 10.2-1.el8s libglusterfs0 10.1-1.el8s 10.2-1.el8s libkadm5 1.18.2-17.el8 1.18.2-20.el8 librados2 16.2.7-1.el8s 16.2.9-1.el8s libradosstriper1 16.2.7-1.el8s 16.2.9-1.el8s librbd1 16.2.7-1.el8s 16.2.9-1.el8s librgw2 16.2.7-1.el8s 16.2.9-1.el8s libsolv 0.7.20-1.el8 0.7.20-3.el8 libxml2 2.9.7-13.el8 2.9.7-14.el8 llvm-compat-libs 13.0.1-2.module_el8.7.0+1142+5343df54 llvm-libs 13.0.0-3.module_el8.6.0+1029+6594c364 nftables 0.9.3-25.el8 0.9.3-26.el8 nmstate 1.3.0-0.alpha.20220407.el8 1.3.0-0.alpha.20220505.el8 nmstate-plugin-ovsdb 1.3.0-0.alpha.20220407.el8 1.3.0-0.alpha.20220505.el8 ovirt-node-ng-image-update-placeholder 4.5.0.2-1.el8 4.5.0.3-1.el8 ovirt-release-host-node 4.5.0.2-1.el8 4.5.0.3-1.el8 polkit 0.115-13.el8_5.1 0.115-13.0.1.el8.2 polkit-libs 0.115-13.el8_5.1 0.115-13.0.1.el8.2 python3-audit 3.0.7-3.el8 3.0.7-4.el8 python3-ceph-argparse 16.2.7-1.el8s 16.2.9-1.el8s python3-ceph-common 16.2.7-1.el8s 16.2.9-1.el8s python3-cephfs 16.2.7-1.el8s 16.2.9-1.el8s python3-dnf 4.7.0-8.el8 4.7.0-9.el8 python3-gluster 10.1-1.el8s 10.2-1.el8s python3-hawkey 0.63.0-8.el8 0.63.0-9.el8 python3-libdnf 0.63.0-8.el8 0.63.0-9.el8 python3-libnmstate 1.3.0-0.alpha.20220407.el8 1.3.0-0.alpha.20220505.el8 python3-libxml2 2.9.7-13.el8 2.9.7-14.el8 python3-nftables 0.9.3-25.el8 0.9.3-26.el8 python3-rados 16.2.7-1.el8s 16.2.9-1.el8s python3-rbd 16.2.7-1.el8s 16.2.9-1.el8s python3-rgw 16.2.7-1.el8s 16.2.9-1.el8s rng-tools 6.14-4.git.b2b7934e.el8 6.15-1.el8 selinux-policy 3.14.3-97.el8 3.14.3-98.el8 selinux-policy-targeted 3.14.3-97.el8 3.14.3-98.el8 which 2.21-17.el8 2.21-18.el8 yum 4.7.0-8.el8 4.7.0-9.el8 Additional resources: - Read more about the oVirt 4.5.0 release highlights: https://www.ovirt.org/release/4.5.0/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: https://blogs.ovirt.org/ Thanks in advance, -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

LACP across multiple switches
by Jorge Visentini 25 May '22

25 May '22

Hi all. Is it possible to configure oVirt for work with two NICs in bond/LACP across two switches, according to the image below? [image: LACP_Across_Two_Switchs.png] Thank you all. You guys do a wonderful job. -- Att, Jorge Visentini +55 55 98432-9868

5 5

what happens during a host bootstrap
by ravi k 25 May '22

25 May '22

Hello, When we add a host to ovirt, the steps at a high level are virtualization checks, installation of packages, and creation of a bridge. Can someone please share more details around the bridge creation? I'll try explaining what I observed. We have a bond0 and the ip is assigned to bond0.121 interface. When we add the host to ovirt, the vdsm bridge is created and ovirtmgmt port is added to the bridge. In case of a OVS switch based cluster, the br-int bridge is also created. The current ip details are obtained, bond0 and bond0.121 are brought down and the ip is assigned to the ovirtmgmt interface. With 4.4 and above this is performed using nmstatectl. I enabled debug in nmstate to observe the steps in detail. So if there's any document or page that I can refer to please post the link. I'm trying to debug a issue where nmstate is creating the ovirtmgmt but rolling back the config due to connectivity failure. So it got me interested in understanding what happens in the background during the setupnetworks phase. Regards. Ravi

1 0

Python error when deploying SHE on Rocky Linux
by paul.chapman＠farmgroup.tv 24 May '22

24 May '22

Hi, I'm trying to deploy a self hosted engine on a Rocky Linux 8.6. Ovirt has installed ok but I get this when deploying the engine - [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Python Module not found: firewalld and its python module are required for this module, version 0.2.11 or newer required (0.3.9 or newer for offline operations)"} I've tried running ansible_python_interpreter=/usr/bin/python3 on the host pre deployment but that hasn't worked. I've copied the progress below. Does the engine exist in part at the point it fails and the problem is Python on the Engine not the host? INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Verify abrt-action-save-package-data file] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Verify abrt-action-save-package-data file] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set variable for supported bond modes] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect interface types] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for Team devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get list of Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect Team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter team devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only team devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Search VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate invalid VLANs list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create list of unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices naming convention pattern] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad naming] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid naming convention] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with invalid naming convention are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for base interface of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get base interface types of VLAN devices] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for bond as base type of VLAN device] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if bond base interface of VLAN device is in supported mode] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check VLAN devices with bad bond mode base interfaces] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Collect unsupported VLAN bonds] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter VLAN devices with invalid bond mode base interface] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if only VLAN devices with bad bond mode are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported VLAN devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate list of all unsupported network devices] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter unsupported interface types] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Failed if only unsupported devices are available] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exist] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop VNC encryption config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Verify abrt-action-save-package-data file] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check IPv6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get IPv4 route] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get IPv6 route] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse libvirt default network configuration] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set network_dict from default_net_xml] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create he-network-config.xml from network-config.j2 template] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, destroy] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, undefine] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Update libvirt default network configuration, define] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start libvirt] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get routing rules, IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get routing rules, IPv6] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Save bridge name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the bridge to appear on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Accept IPv6 Router Advertisements for virbr0] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Refresh network facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch IPv6 CIDR for virbr0] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 outbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 inbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host unique id] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install ovirt-engine-appliance rpm] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse appliance configuration for path] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse appliance configuration for sha1sum] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get OVA path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Compute sha1sum] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Compare sha1sum] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Register appliance PATH] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check available space on local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check appliance size] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure we have enough space to extract the appliance] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Extract appliance to local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get appliance disk size] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Parse qemu-img output] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Hash the appliance root password] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create cloud init user-data and meta-data files] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create ISO disk] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fix local VM directory permission] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get local VM IP] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove leftover entries in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create an entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for SSH to restart on the local VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set the name for add_host] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch the value of HOST_KEY_CHECKING] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get the username running the deploy] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the local VM] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add an entry for this host on /etc/hosts on the local VM] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set FQDN] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force the local VM FQDN to temporary resolve on the natted network address] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Reconfigure IPv6 default gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore sshd reverse DNS lookups] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add lines to answerfile] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add lines to answerfile] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add lines to answerfile] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get appliance distribution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set appliance distribution variables] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize OpenSCAP variables] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set OpenSCAP datastream path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Verify OpenSCAP datastream] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set OpenSCAP profile] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Apply OpenSCAP profile] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Reset PermitRootLogin for sshd] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enable FIPS on the engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Reboot the engine VM to apply security rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check if FIPS mode is enabled] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce FIPS mode] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Include before engine-setup custom tasks files for the engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Perform pre-install checks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Gather facts on installed packages] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Fail when firewall manager is not installed] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Install required packages for oVirt Engine deployment] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Install oVirt Engine package] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Check if rhevm package is installed] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Install RHV package] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Install rest of the packages required for oVirt Engine deployment] [ INFO ] TASK [ovirt.ovirt.engine_setup : Run engine setup] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Set answer file path] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Use the default answerfile] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Copy custom answer file] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Use remote's answer file] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Copy yum configuration file] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Set 'best' to false] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Remove temporary yum configuration file] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Set offline parameter if variable is set] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Restore engine from file] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Run engine-setup with answerfile] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Make sure `ovirt-engine` service is running] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Run engine-config] [ INFO ] TASK [ovirt.ovirt.engine_setup : Restart engine after engine-config] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Check if Engine health page is up] [ INFO ] ok: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Include after engine-setup custom tasks files for the engine VM] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the engine to reach a stable condition] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Configure LibgfApi support] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Save original OvfUpdateIntervalInMinutes] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set OVF update interval to 1 minute] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Saving original value] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Adding new SSO_ALTERNATE_ENGINE_FQDNS line] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart ovirt-engine service for changed OVF Update configuration and LibgfApi support] [ INFO ] changed: [localhost -> 192.168.222.253] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Mask cloud-init services to speed up future boot] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for ovirt-engine service to start] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Open a port on firewalld] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Python Module not found: firewalld and its python module are required for this module, version 0.2.11 or newer required (0.3.9 or newer for offline operations)"} [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Change ownership of copied engine logs] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy local storage-pool localvmh0q113hk] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool localvmh0q113hk] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Destroy local storage-pool 5d0c9ad9-db74-46d8-a705-9092d5b874e1] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool 5d0c9ad9-db74-46d8-a705-9092d5b874e1] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Thanks in advance for any help Paul.

3 5

On oVirt 4.4 Can not import VM from Export domain from ovirt-4.3 nor DataDomain from ovirt-4.3
by upalmin＠gmail.com 24 May '22

24 May '22

Hi I would like to migrate VMs from 4.3.10 to 4.4.8 and I tried using Data Domain where i get this error: 2022-05-19 15:41:06,262+02 ERROR [org.ovirt.engine.core.utils.ovf.OvfManager] (default task-18) [e0278849-c70a-4cba-8553-b7aac2537314] Error parsing OVF due to OVF error: Linux8_Clone: cannot read 'rasd:InstanceId' with value: null Procedure SOURCE Log in to the Administration Portal of the source environment. Shut down all virtual machines running on the required storage domain. Click Storage → Domains. Click the storage domain’s name to open the details view. Click the Data Center tab. Click Maintenance. Click OK. Click Detach, then click OK. Click Remove. Click OK to remove the storage domain from the source environment. DESTINATION Log in to the Administration Portal of the destination environment. Click Storage → Domains. Click Import Domain. Select the destination data center from the Data Center drop-down list. Enter a name for the storage domain. Select the Domain Function and Storage Type from the appropriate drop-down lists. Select a host from the Host drop-down list. Enter the details of the storage domain. Select the Activate Domain in Data Center check box to automatically activate the storage domain when it is attached. Click OK. I would like to migrate VMs from 4.3.10 to 4.4.8 and I tried using Expot Domain where i get this error: 2022-05-19 19:31:53,083+02 ERROR [org.ovirt.engine.core.utils.ovf.OvfManager] (default task-18) [975030bb-cc66-409e-9c47-e37049b957df] Error parsing OVF due to OVF error: icinga2: cannot read 'rasd:InstanceId' with value: null 2022-05-19 19:31:53,085+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-18) [975030bb-cc66-409e-9c47-e37049b957df] EVENT_ID: IMPORTEXPORT_FAILED_TO_IMPORT_VM(1,168), Failed to read VM '<UNKNOWN>' OVF, it may be corrupted. Underlying error message: OVF error: icinga2: cannot read 'rasd:InstanceId' with value: null Any Ideas? Regars Uros

3 4

too slow!
by tommy 23 May '22

23 May '22

[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 inbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get host unique id] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Install ovirt-engine-appliance rpm] This step is too slow! Any better method ?

2 1

oVirt survey questions gathering
by Sandro Bonazzola 23 May '22

23 May '22

Hi, as every year I'd like to have a survey gathering feedback from the oVirt community. I would like to get input from the community itself on what you'd like to know from the other members of the community. As oVirt developer: which question may help you take decisions on new features or deprecate existing ones you consider unused? As oVirt sysadmin user: which question may help you take decisions on your datacenters planning? As a third party software vendor (backup, monitoring, ...): which questions may help you drive your further developments integrating with oVirt? As a downstream vendor, integrator, consultant offering services around oVirt: which questions may help you drive your investment on contributing to oVirt project? As a university, research center, high school, code club, which questions may help you drive your decision to be involved with the future of oVirt project? Any other questions you think may be relevant and worth asking the oVirt community? Collecting questions suggested in this thread here: https://github.com/oVirt/ovirt-site/wiki/oVirt-2022-Survey-questions Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

4 6

Unable to boot VM due to BIOS error on oVirt 4.5.0.2.
by msjang＠kisti.re.kr 23 May '22

23 May '22

Hi, all. I currently operates several VMs on cockpit-machines, and I want to move those VMs to oVirt. When I tried oVirt 4.5 last month, installation failed and I tried oVirt 4.3.10, it works. I moved several qcow2 disks on hyper-converged gluster and I attached them on VMs and some disks boot and operate well, but some cannot boot due to XFS issues - https://access.redhat.com/solutions/4582401. So, I installed newest ovirt-engine on CentOS 8 Stream. I installed ovirt-node via ovirt-node-ng-installer-4.5.0-2022051313.el8.iso. I applied vdsm-gluster-cli patch manually on ovirt nodes, that does not applied on ovirt-ng iso. https://github.com/oVirt/vdsm/commit/2da10debcea0b9f2e235dc18c2d567e6aa4254…. Then, I encountered the following boot error when I launched several VMs that worked on cockpit-machines and oVirt 4.3.10. BdsDxe: failed to load Boot0001 "UEFI Misc Device" from PciRoot (0x0)/Pci(0x2,0x3)/Pci(0x0,0x0): Not Found BdsDxe: No bootable option or device was found BdsDxe: Press any key to enter the Boot Manager Menu. Is there any patch that I should apply? Best Regards Minseok Jang. ---- PS. FIY, I leave my current status. I currently running 4 machines engine.ovirt1.int - VM n1~n3.ovirt1.int - HP DL380 Gen9, hyper-converged gluster applied. engine.ovirt1.int # dnf info ovirt-engine.noarch Installed Packages Name : ovirt-engine Version : 4.5.0.8 n1.ovirt1.int # dnf info ovirt-release-host-node Installed Packages Name : ovirt-release-host-node Version : 4.5.0.2 n1.ovirt1.int # lscpu Architecture: x86_64 CPU(s): 24 On-line CPU(s) list: 0-23 Model name: Intel(R) Xeon(R) CPU E5-2643 v4 @ 3.40GHz n1.ovirt1.int # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 223.6G 0 disk ... └─sda3 8:3 0 222G 0 part ├─onn-pool00_tmeta 253:0 0 1G 0 lvm │ └─onn-pool00-tpool 253:2 0 173G 0 lvm ... ├─onn-pool00_tdata 253:1 0 173G 0 lvm │ └─onn-pool00-tpool 253:2 0 173G 0 lvm ... └─onn-swap 253:4 0 4G 0 lvm [SWAP] sdb 8:16 0 3.5T 0 disk ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb_tmeta 253:5 0 15.9G 0 lvm │ └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb-tpool 253:7 0 3.5T 0 lvm │ ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb 253:8 0 3.5T 1 lvm │ └─gluster_vg_sdb-gluster_lv_vmstore1 253:10 0 3.2T 0 lvm /gluster_bricks/vmstore1 └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb_tdata 253:6 0 3.5T 0 lvm └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb-tpool 253:7 0 3.5T 0 lvm ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb 253:8 0 3.5T 1 lvm └─gluster_vg_sdb-gluster_lv_vmstore1 253:10 0 3.2T 0 lvm /gluster_bricks/vmstore1 # gluster volume info vmstore1 Volume Name: vmstore1 Type: Replicate Status: Started Number of Bricks: 1 x 3 = 3 Bricks: Brick1: n1.ovirt1.int:/gluster_bricks/vmstore1/vmstore1 Brick2: n2.ovirt1.int:/gluster_bricks/vmstore1/vmstore1 Brick3: n3.ovirt1.int:/gluster_bricks/vmstore1/vmstore1 ...

2 1

Updating oVirt engine and nodes
by Matheus 21 May '22

21 May '22

Hi all, I use oVirt at home for small tasks and some server VM for my needs. I am planning on updating from 4.4 to 4.5 and I found through the list I don't need to install all from ground every time I have to update. I did that when I got 4.4 from 4.3. I tried to follow the update info from ovirt site (https://www.ovirt.org/documentation/upgrade_guide/index.html) and I got stuck on: # dnf install -y centos-release-ovirt45 I use Rocky Linux 8.6 for the engine and that command line doesn't work here: [root@rocky-engine ~]# dnf install -y rocky-release-ovirt45 Last metadata expiration check: 3:28:13 ago on Fri 20 May 2022 11:02:26 AM -03. No match for argument: rocky-release-ovirt45 Error: Unable to find a match: rocky-release-ovirt45 [root@rocky-engine ~]# I know not much on yum knowledge. Is there a howto on upgrading? My engine runs out of the ovirt host and I have just one host so far. I run rocky 8.6 on the engine and centos stream 8 on host. Thanks in advance, matheus -- "We will call you Cygnus, the God of balance you shall be."

2 1