September 2022 - Users - oVirt List Archives

Migrating VM from old ovirt to a new one
by Facundo Badaracco 18 Sep '22

18 Sep '22

Hi everyone I would like to ask you a question I have an ovirt 4.4 which got corrupted certs and I can't access the gui. It gives me error 500 internal when I want to access. I have a new ovirt 4.5 on glusterfs which I would like to migrate all my vm's to. Is this possible? Can it be done by cli? It would save me from having to reinstall all the vm's.

2 1

Gluster setup for oVirt
by Jonas 18 Sep '22

18 Sep '22

Hello all I tried to setup Gluster volumes in cockpit using the wizard. Based on Red Hat's recommendations I wanted to put the Volume for the oVirt Engine on a thick provisioned logical volume [1] and therefore removed the line thinpoolname and corresponding configuration from the yml file (see below). Unfortunately, this approach was not successful. My solution is now to only create a data volume and manually create a thick provisioned gluster volume manually. What would you recommend doing? Thanks your any input :) Regards, Jonas [1]: https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infras… hc_nodes: hosts: server-005.storage.int.rabe.ch: gluster_infra_volume_groups: - vgname: vg_tier1_01 pvname: /dev/md/raid_tier1_gluster gluster_infra_mount_devices: - path: /gluster_bricks/tier1-ovirt-engine-01/gb-01 lvname: lv_tier1_ovirt_engine_01 vgname: vg_tier1_01 - path: /gluster_bricks/tier1-ovirt-data-01/gb-01 lvname: lv_tier1_ovirt_data_01 vgname: vg_tier1_01 blacklist_mpath_devices: - raid_tier1_gluster gluster_infra_thinpools: - vgname: vg_tier1_01 thinpoolname: lv_tier1_ovirt_data_01_tp poolmetadatasize: 16G gluster_infra_lv_logicalvols: - vgname: vg_tier1_01 lvname: lv_tier1_ovirt_engine_01 lvsize: 100G - vgname: vg_tier1_01 thinpool: lv_tier1_ovirt_data_01_tp lvname: lv_tier1_ovirt_data_01 lvsize: 16000G server-006.storage.int.rabe.ch: gluster_infra_volume_groups: - vgname: vg_tier1_01 pvname: /dev/md/raid_tier1_gluster gluster_infra_mount_devices: - path: /gluster_bricks/tier1-ovirt-engine-01/gb-01 lvname: lv_tier1_ovirt_engine_01 vgname: vg_tier1_01 - path: /gluster_bricks/tier1-ovirt-data-01/gb-01 lvname: lv_tier1_ovirt_data_01 vgname: vg_tier1_01 blacklist_mpath_devices: - raid_tier1_gluster gluster_infra_thinpools: - vgname: vg_tier1_01 thinpoolname: lv_tier1_ovirt_data_01_tp poolmetadatasize: 16G gluster_infra_lv_logicalvols: - vgname: vg_tier1_01 lvname: lv_tier1_ovirt_engine_01 lvsize: 100G - vgname: vg_tier1_01 thinpool: lv_tier1_ovirt_data_01_tp lvname: lv_tier1_ovirt_data_01 lvsize: 16000G server-007.storage.int.rabe.ch: gluster_infra_volume_groups: - vgname: vg_tier0_01 pvname: /dev/md/raid_tier0_gluster gluster_infra_mount_devices: - path: /gluster_bricks/tier1-ovirt-engine-01/gb-01 lvname: lv_tier1_ovirt_engine_01 vgname: vg_tier0_01 - path: /gluster_bricks/tier1-ovirt-data-01/gb-01 lvname: lv_tier1_ovirt_data_01 vgname: vg_tier0_01 blacklist_mpath_devices: - raid_tier0_gluster gluster_infra_thinpools: - vgname: vg_tier0_01 thinpoolname: lv_tier1_ovirt_data_01_tp poolmetadatasize: 1G gluster_infra_lv_logicalvols: - vgname: vg_tier0_01 lvname: lv_tier1_ovirt_engine_01 lvsize: 20G - vgname: vg_tier0_01 thinpool: lv_tier1_ovirt_data_01_tp lvname: lv_tier1_ovirt_data_01 lvsize: 32G vars: gluster_infra_disktype: JBOD gluster_infra_daling: 1024K gluster_set_selinux_labels: true gluster_infra_fw_ports: - 2049/tcp - 54321/tcp - 5900/tcp - 5900-6923/tcp - 5666/tcp - 16514/tcp gluster_infra_fw_permanent: true gluster_infra_fw_state: enabled gluster_infra_fw_zone: public gluster_infra_fw_services: - glusterfs gluster_features_force_varlogsizecheck: false cluster_nodes: - server-005.storage.int.rabe.ch - server-006.storage.int.rabe.ch - server-007.storage.int.rabe.ch gluster_features_hci_cluster: '{{ cluster_nodes }}' gluster_features_hci_volumes: - volname: tier1-ovirt-engine-01 brick: /gluster_bricks/tier1-ovirt-engine-01/gb-01 arbiter: 1 - volname: tier1-ovirt-data-01 brick: /gluster_bricks/tier1-ovirt-data-01/gb-01 arbiter: 1

4 4

static IP with OVN subnet
by ravi k 16 Sep '22

16 Sep '22

Hello, Hope you are all doing well. We have an interesting thing going on and so wanted to share with you all for some ideas and feedback. We configured a cluster with OVS switch and added an external network with subnet. So OVN started managing the subnet using DHCP. But here's the problem. When we add a nic with this network, an ip is assigned by DHCP. But we want an IP of our choice to be assigned. Here's what we tried. 1. We tried using the ovn-nbctl lsp-set-address like ovn-nbctl lsp-set-addresses 7840c97b-73c2-4246-a2a8-0e9e5b7f420a "56:6f:6b:54:00:ec 10.19.3.8" to update the static IP. But this does not persist a NIC unplug or a VM reboot. So you might ask why not just try assigning a static IP and not add the external subnet. We want to use security groups. For security groups to work, the ip assigned to the NIC and the IP in the value for fixed_ips in `openstack port show` should be the same. So the same thing repeats here as well. If we use the `openstack port set` to update the fixed_ips, a NIC unplug or a VM reboot will remove the IP. We have an internal IPAM that provides us IPs during our automated provisioning. Did anyone try this or have any ideas how to work around this? The only option seems to be just use DHCP and then update that IP in our internal IPAM tool. Please let me know if I'm unclear and any more info is required. Regards, rav

1 0

How does ovirt use cloudbase-init to initialize the Windows image
by labose＠126.com 16 Sep '22

16 Sep '22

How does ovirt use cloudbase-init to initialize the Windows image? Sorry, I'm a beginner. I don't know if I use cloudbase-init, I install this program in the virtual machine image, but I don't know how to operate it in the ovirt console.

1 0

Re: Network usage for VMs not displayed
by jplorier＠gmail.com 16 Sep '22

16 Sep '22

Hi, I have the same scenario with 4.0 setup El vie, 16 de sep. de 2022 5:58 a. m., <users-request(a)ovirt.org> escribió: > Send Users mailing list submissions to > users(a)ovirt.org > > To subscribe or unsubscribe via email, send a message with subject or > body 'help' to > users-request(a)ovirt.org > > You can reach the person managing the list at > users-owner(a)ovirt.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..."Today's Topics: > > 1. Re: Error during deployment of ovirt-engine (Jonas) > 2. Re: Error during deployment of ovirt-engine (Yedidyah Bar David) > 3. Resize hosted-engine disk (Jorge Visentini) > 4. Network usage for VMs not displayed (0%) (Ricardo Alonso) > > > > ---------- Forwarded message ---------- > From: Jonas <jonas(a)rabe.ch> > To: Yedidyah Bar David <didi(a)redhat.com>, oVirt Users <users(a)ovirt.org> > Cc: > Bcc: > Date: Thu, 15 Sep 2022 21:46:37 +0200 > Subject: [ovirt-users] Re: Error during deployment of ovirt-engine > Ok, thanks for the info. Do you have any further information? > > On 9/15/22 09:11, Yedidyah Bar David wrote: > > On Wed, Sep 14, 2022 at 11:31 PM Jonas <jonas(a)rabe.ch> wrote: > >> Ok even after resetting the password through SSH it is not accepted on > the web page. > >> > >> [root@ovirt-engine-test ~]# ovirt-aaa-jdbc-tool user password-reset > admin --password-valid-to="2222-09-14 20:07:39Z" --password="interactive:" > --force > >> Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false > >> Password: > >> Reenter password: > >> updating user admin... > >> user updated successfully > >> > >> On 9/14/22 21:40, Jonas wrote: > >> > >> Hello all > >> > >> I'm trying to deploy an oVirt Engine through the cockpit interface. > Unfortunately the deployment fails with the following error: > > Sorry, but the cockpit hosted-engine deployment is broken. Please use > > the CLI. Thanks. > > > > Best regards, > > > ---------- Forwarded message ---------- > From: Yedidyah Bar David <didi(a)redhat.com> > To: Jonas <jonas(a)rabe.ch> > Cc: oVirt Users <users(a)ovirt.org> > Bcc: > Date: Thu, 15 Sep 2022 23:01:26 +0300 > Subject: [ovirt-users] Re: Error during deployment of ovirt-engine > On Thu, Sep 15, 2022 at 10:46 PM Jonas <jonas(a)rabe.ch> wrote: > > > > Ok, thanks for the info. Do you have any further information? > > Not sure what you mean. How to deploy HE using the CLI? Here: > > > https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engin… > > Best regards, > > > > > On 9/15/22 09:11, Yedidyah Bar David wrote: > > > On Wed, Sep 14, 2022 at 11:31 PM Jonas <jonas(a)rabe.ch> wrote: > > >> Ok even after resetting the password through SSH it is not accepted > on the web page. > > >> > > >> [root@ovirt-engine-test ~]# ovirt-aaa-jdbc-tool user password-reset > admin --password-valid-to="2222-09-14 20:07:39Z" --password="interactive:" > --force > > >> Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false > > >> Password: > > >> Reenter password: > > >> updating user admin... > > >> user updated successfully > > >> > > >> On 9/14/22 21:40, Jonas wrote: > > >> > > >> Hello all > > >> > > >> I'm trying to deploy an oVirt Engine through the cockpit interface. > Unfortunately the deployment fails with the following error: > > > Sorry, but the cockpit hosted-engine deployment is broken. Please use > > > the CLI. Thanks. > > > > > > Best regards, > > > > > -- > Didi > > > > ---------- Forwarded message ---------- > From: Jorge Visentini <jorgevisentini(a)gmail.com> > To: users <users(a)ovirt.org> > Cc: > Bcc: > Date: Fri, 16 Sep 2022 00:53:15 -0300 > Subject: [ovirt-users] Resize hosted-engine disk > Hi all. > Is it possible to resize the disk of the HostedEngine VM? > I resized the LUN on Storage, but I can't resize the disk/LVM. > > How is it possible to resize the disk? > > All the best! > -- > Att, > Jorge Visentini > +55 55 98432-9868 > > > > ---------- Forwarded message ---------- > From: Ricardo Alonso <ricardoalonsos(a)gmail.com> > To: users <users(a)ovirt.org> > Cc: > Bcc: > Date: Fri, 16 Sep 2022 09:57:48 +0100 > Subject: [ovirt-users] Network usage for VMs not displayed (0%) > Hello guys, > > I notice for several weeks that the network usage is displaying 0% for all > VMs. I notice an old message ( > https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NNK6ERGAWDGIOL…) > but still seems to have no solution. > > Also on Grafana, no data is displayed. Has anyone noticed this issue? I > can open a bug to verify. > > Best regards, > -- > Ricardo Alonso > ricardoalonsos(a)gmail.com > +44 7340-546916 > Skype: ricardoalonso > GPG Fingerprint: FC7E 4A5F B7A4 > 87F4 6876 5325 D95F BFBF B7AC EE54 > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ >

1 0

Network usage for VMs not displayed (0%)
by Ricardo Alonso 16 Sep '22

16 Sep '22

Hello guys, I notice for several weeks that the network usage is displaying 0% for all VMs. I notice an old message ( https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NNK6ERGAWDGIOL…) but still seems to have no solution. Also on Grafana, no data is displayed. Has anyone noticed this issue? I can open a bug to verify. Best regards, -- Ricardo Alonso ricardoalonsos(a)gmail.com +44 7340-546916 Skype: ricardoalonso GPG Fingerprint: FC7E 4A5F B7A4 87F4 6876 5325 D95F BFBF B7AC EE54

1 0

Resize hosted-engine disk
by Jorge Visentini 16 Sep '22

16 Sep '22

Hi all. Is it possible to resize the disk of the HostedEngine VM? I resized the LUN on Storage, but I can't resize the disk/LVM. How is it possible to resize the disk? All the best! -- Att, Jorge Visentini +55 55 98432-9868

1 0

Certificate doesn't contain valid subject alternative name
by Ayansh Rocks 15 Sep '22

15 Sep '22

Hi All, I am getting below alert on my single node ovirt. Can anyone tell me more about it and how I can fix it.I am using ovirt 4.3.8.2. Certificate of host host-name.example.com is invalid. The certificate doesn't contain valid subject alternative name, please enroll new certificate for the host. Thank you

3 5

OLVM gets error "VDSM hostname command AddImageTicketVDS failed: Image daemon is unsupported: ()" when uploading iso file
by Raul Diaz 14 Sep '22

14 Sep '22

Hello guys. I'm new with OLVM and KVM. Right now I have installed a fresh OL8 with kvm in an HPE Superdome Flex. And I have installed OLVM in a VMware VM, but when I want to upload an iso file to create a VM in the KVM I get an error "VDSM hostname command AddImageTicketVDS failed: Image daemon is unsupported: ()" This is my environment: KVM - OL8.6; qemu-kvm-6.2.0-11 HPE Superdome Flex OLVM - OL8.6; ovirt-engine-4.4.10.7-1.0.10.el8.noarch, VMware Virtual Machine. Best regards.

3 2

Ovirt version 4.4.9.5-1.el8 vm doesn't start after power outage
by florianvanoudgaarden＠gmail.com 14 Sep '22

14 Sep '22

After we had a power outrage 2 of my 7 vm's doesn't start anymore. When i look at the logfile while starting i get the following errors in the engine.log 2022-09-14 15:18:29,078+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-138161) [40d05c63] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), VDSM command GetVmLeaseInfoVDS failed: Command ['/usr/bin/dd', 'if=/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases', 'iflag=direct,skip_bytes', 'skip=1048576', 'bs=253952', 'count=1'] failed with rc=1 out='[suppressed]' err=b"/usr/bin/dd: failed to open '/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases': No such file or directory\n" 2022-09-14 15:18:29,079+02 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (EE-ManagedThreadFactory-engine-Thread-138161) [40d05c63] IrsBroker::Failed::GetVmLeaseInfoVDS: IRSGenericException: IRSErrorException: Failed to GetVmLeaseInfoVDS, error = Command ['/usr/bin/dd', 'if=/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases', 'iflag=direct,skip_bytes', 'skip=1048576', 'bs=253952', 'count=1'] failed with rc=1 out='[suppressed]' err=b"/usr/bin/dd: failed to open '/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases': No such file or directory\n", code = 100 2022-09-14 15:18:29,085+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmLeaseInfoVDSCommand] (EE-ManagedThreadFactory-engine-Thread-138161) [40d05c63] FINISH, GetVmLeaseInfoVDSCommand, return: , log id: 7d38bb40 2022-09-14 15:18:29,085+02 ERROR [org.ovirt.engine.core.bll.storage.lease.GetVmLeaseInfoCommand] (EE-ManagedThreadFactory-engine-Thread-138161) [40d05c63] Failure in getting lease info for VM '831e1a9d-2f87-48b5-af69-93d13f24d95d' from storage domains 'd036345b-be92-453d-a822-c08977fe3982', message: EngineException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to GetVmLeaseInfoVDS, error = Command ['/usr/bin/dd', 'if=/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases', 'iflag=direct,skip_bytes', 'skip=1048576', 'bs=253952', 'count=1'] failed with rc=1 out='[suppressed]' err=b"/usr/bin/dd: failed to open '/rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md/xleases': No such file or directory\n", code = 100 (Failed with error GeneralException and code 100) What noticed is the "No such file or directory" message so did a manual look at the "dom_md" directory and i notice the file "xleases" doesn't exist. Output from commandline listing [root@ovirt dom_md]# ll totaal 4 -rw-rw----. 1 vdsm kvm 0 14 jan 2022 ids -rw-rw----. 1 vdsm kvm 16777216 14 jan 2022 inbox -rw-rw----. 1 vdsm kvm 0 14 jan 2022 leases -rw-r--r--. 1 vdsm kvm 481 14 jan 2022 metadata -rw-rw----. 1 vdsm kvm 16777216 14 jan 2022 outbox [root@ovirt dom_md]# pwd /rhev/data-center/mnt/_data_images/d036345b-be92-453d-a822-c08977fe3982/dom_md What can I do to get the 2 vm's started again?

1 0

How to restore full vmbackups that was created with backup_vm.py
by Don Dupuis 13 Sep '22

13 Sep '22

Hello I have used the backup_vm.py script in 4.5.2.4 to make full backups of my vms to a nfs share. What is the process to restore the backups if needed? Thanks Don

2 2

gerrit.ovirt.org migration
by Denis Volkov 13 Sep '22

13 Sep '22

Hello There's a migration of gerrit to another server. Server should change IP address I'll post update when it's done -- Denis Volkov

1 1

Failure Of Latest oVirt Installation - Missing Packages
by Matthew J Black 13 Sep '22

13 Sep '22

Hi All, This is all on a Rocky Linux 8.6 box, as a CLI oVirt self-hosted engine install. I have followed all of the instructions (include the special RHEL and derivatives and Rocky Linux instructions) in the oVirt documentation. So, I'm attempting to install the ovirt-hosted-engine-setup rpm (ie dnf -y install ovirt-hosted-engine-setup), and I'm getting failures involving the following packages (ie the following packages cannot be found): - collectd >= 5.12.0-7 - collectd-disk >= 5.12.0-7 - collectd-write_http >= 5.12.0-7 - collectd-write_syslog >= 5.12.0-7 - collectd-netlink >= 5.12.0-7 - collectd-virt >= 5.12.0-7 - python3-os-brick The full dnf error message is: ~~~ Error: Problem: package ovirt-hosted-engine-setup-2.6.5-1.el8.noarch requires ovirt-host >= 4.5.0, but none of the providers can be installed - package ovirt-host-4.5.0-3.el8.x86_64 requires ovirt-host-dependencies = 4.5.0-3.el8, but none of the providers can be installed - cannot install the best candidate for the job - nothing provides collectd >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides collectd-disk >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides collectd-write_http >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides collectd-write_syslog >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides collectd-netlink >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides collectd-virt >= 5.12.0-7 needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 - nothing provides python3-os-brick needed by ovirt-host-dependencies-4.5.0-3.el8.x86_64 ~~~ Doing a dnf with --nobest produces similar results ie: ~~~ Error: Problem: conflicting requests - package ovirt-hosted-engine-setup-2.6.3-1.el8.noarch requires ovirt-host >= 4.5.0, but none of the providers can be installed - package ovirt-hosted-engine-setup-2.6.4-1.el8.noarch requires ovirt-host >= 4.5.0, but none of the providers can be installed - package ovirt-hosted-engine-setup-2.6.5-1.el8.noarch requires ovirt-host >= 4.5.0, but none of the providers can be installed etc ~~~ In all of the repos (& mirrors) I've looked at the latest version of collectd* (for EL8) is 5.9.0-5, and I can't locate python3-os-block at all. pkgs.org says that even the version of collectd* in the Centos 8 Repos is v5.9.0-5 in the EPEL EL8 repo. According to rpmfind.net there is a 5.12.0-23 version of collectd* in the EPEL EL9 repo, but I read somewhere that oVirt is not-production-ready on EL9, so I don't have the EPEL EL9 repo "available". pkgs.org says that the only versions it knows about for pyton3-os-brick are for Debian and Ubuntu, and rpmfind.net doesn't list it at all (which makes sense if there are only versions from Debia-based distros). Could someone please point me towards an EL8 repo where I can get the required packages, or, if I'm being totally stupid, what I'm doing wrong? Thanks in advance Dulux-Oz

2 6

Slow upload via oVirt Manager
by markeczzz＠gmail.com 13 Sep '22

13 Sep '22

Hi! I am trying to upload some rather large disk images via oVirt Web Manager, but I am getting rather slow speeds. Network is 1Gbps between my pc and oVirt node via which I am uploading, but I am getting around 200Mbps transfer speed. Last time when I was uploading was when I had version 4.4 of oVirt and I haven't had that problem then. Now I am using latest version. Any steps how to troubleshoot this?

1 0

vdsm.log full of "error" because node don't run the "engine"
by Diego Ercolani 12 Sep '22

12 Sep '22

Hello, I don't know if it's normal but in all the nodes of the cluster (except the one that runs the engine) I have something like: 2022-09-12 15:41:54,563+0000 INFO (jsonrpc/0) [api.virt] START getStats() from=::1,57578, vmId=8486ed73-df34-4c58-bfdc-7025dec63b7f (api:48) 2022-09-12 15:41:54,563+0000 INFO (jsonrpc/0) [api] FINISH getStats error=Virtual machine does not exist: {'vmId': '8486ed73-df34-4c58-bfdc-7025dec63b7f'} (api:129) 2022-09-12 15:41:54,563+0000 INFO (jsonrpc/0) [api.virt] FINISH getStats return={'status': {'code': 1, 'message': "Virtual machine does not exist: {'vmId': '8486ed73-df34-4c58-bfdc-7025dec63b7f'}"}} from=::1,57578, vmId=8486ed73-df34-4c58-bfdc-7025dec63b7f (api:54) 2022-09-12 15:41:54,563+0000 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC call VM.getStats failed (error 1) in 0.00 seconds (__init__:312) The UUID 8486ed73-df34-4c58-bfdc-7025dec63b7f is the UUID of the Hosted-engine VM, obviously it run only in one noe and, as I undestand, the other nodes are querying the VM state only to fence the VMs if is started on more node at a time... but having the log full of these "error" are annoying. I would prefer to have the word "error" only in meaningful context. This if the hypotesis of my interpretation is correct, if it's a true error, then please address me how to fix it. Thank you.

1 0

vm migration failed with certifacate issue
by parallax 11 Sep '22

11 Sep '22

ovirt 4.4.4.7 not able to migrate VMs between hosts with following vdsm error: operation failed: Failed to connect to remote libvirt URI qemu+tls://kvm4.imp.loc/system: authentication failed: Failed to verify peer's certificate hosts certificates was renewed recently but hosts hasn't been reloaded how to fix this issue

2 2

remote-viewer "Change CD menu" contains ISOs only from one storage domain
by Alexander Murashkin 09 Sep '22

09 Sep '22

remote-viewer "Change CD menu" contains ISOs only from one storage domain. There are two "data" storage domains in the datacenter. Both of them contains ISOs and VM disk images. The first VM has a disk image in the first storage domain and so is shown in the domain's "Virtual Machine" tab. Similar, the second VM has a disk image in the second storage domain and so is also shown in the domain's "Virtual Machine" tab. When the VMs are running, in their consoles, in "Change CD menu" only ISOs from the first storage domain are listed. I would consider it a bug. It is possible to attach ISO from any storage domain to any VM. But it is not possible to see ISO from the second domain in "Change CD menu". Engine RPM: ovirt-engine-4.5.2.5-1.el8.noarch. Desktop RPMs: libgovirt-0.3.8-3.fc36.x86_64 virt-viewer-11.0-2.fc36.x86_64 Shall I open a bug in Bugzilla? If so, what component it is related to - libgovirt? Alexander Murashkin PS I also have tried ISO domain. No luck.

1 0

VM remote console issue related to VNC and Root CA certs?
by Chris Smith 09 Sep '22

09 Sep '22

Hello, I have built a small 2 cluster "datacenter". One host is oVirt 4.5.1 and another 4.5.2. Each host is in it's own cluster due to CPU type difference. I am able to build VMs on each host and they are able to start. My issue I am fighting now is that I am unable to get remote-viewer.exe to open a remote console window to a VM on the 2nd cluster I've built. I'm trying to connect to a VM named "utm" which is running on host "mini-node" which is in a separate cluster from where "ovirt-node" resides. "ovirt-node" is the host where "ovirt-engine" resides. I have attached the whole log to this e-mail from my windows machine, and I think this part is most relevant: [image: image.png] I've tried to install the SSL certs for each server (from tcp/9090) on my windows workstation's cert store in both user and computer personal and trusted root ca store, but i'm not sure that the cert I have for my 2nd host is made right? [image: image.png] [image: image.png] This is my ovirt engine cert (ignore the comcast.net domain name, that is due to linksys nonsense that i'm just running with): [image: image.png] [image: image.png] I wonder, should SSL cert for "mini-node" have been issued by "ovirt-engine"? i think it's self-signed at the moment. Here is what my console.vv looks like: [virt-viewer] type=vnc host=mini-node.hsd1.fl.comcast.net port=5900 password=<snip> # Password is valid for 120 seconds. delete-this-file=1 fullscreen=0 title=utm:%d toggle-fullscreen=shift+f11 release-cursor=shift+f12 secure-attention=ctrl+alt+end versions=rhev-win64:2.0-160;rhev-win32:2.0-160;rhel8:7.0-3;rhel7:2.0-6;rhel6:99.0-1 newer-version-url= http://www.ovirt.org/documentation/admin-guide/virt/console-client-resources [ovirt] host=ovirt-engine.hsd1.fl.comcast.net:443 vm-guid=cdfe33fc-4d6e-425d-b5d2-d999f56ea4ea sso-token=<snip> admin=1 ca=-----BEGIN CERTIFICATE----- <snip> Any help is appreciated, Thank you, Chris

1 0

Cannot upgrade hosted-engine due to a LUN in a storage domain
by virden-gerald＠aramark.com 09 Sep '22

09 Sep '22

I need to know if there are any cli commands to manage storage domains. I have a completely empty LUN in a storage domain but I can't use it to apply to my hosted-engine upgrade. I think I need to put the storage domain into maintenance mode and remove it but I don't have the GUI to do this. Anyone know how to use the command line for this?

1 0

hosted-engine -vm-status show a ghost node that is not anymore in the cluster: how to remove?
by Diego Ercolani 08 Sep '22

08 Sep '22

engine 4.5.2.4 The issue is that in my cluster when I use the: [root@ovirt-node3 ~]# hosted-engine --vm-status --== Host ovirt-node3.ovirt (id: 1) status ==-- Host ID : 1 Host timestamp : 1633143 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : ovirt-node3.ovirt Local maintenance : False stopped : False crc32 : 1cbfcd19 conf_on_shared_storage : True local_conf_timestamp : 1633143 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=1633143 (Wed Aug 31 14:37:53 2022) host-id=1 score=3400 vm_conf_refresh_time=1633143 (Wed Aug 31 14:37:53 2022) conf_on_shared_storage=True maintenance=False state=EngineDown stopped=False --== Host ovirt-node1.ovirt (id: 2) status ==-- Host ID : 2 Host timestamp : 373629 Score : 0 Engine status : unknown stale-data Hostname : ovirt-node1.ovirt Local maintenance : True stopped : False crc32 : 12a6eb81 conf_on_shared_storage : True local_conf_timestamp : 373630 Status up-to-date : False Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=373629 (Tue Jun 14 16:48:50 2022) host-id=2 score=0 vm_conf_refresh_time=373630 (Tue Jun 14 16:48:50 2022) conf_on_shared_storage=True maintenance=True state=LocalMaintenance stopped=False --== Host ovirt-node2.ovirt (id: 3) status ==-- Host ID : 3 Host timestamp : 434247 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : ovirt-node2.ovirt Local maintenance : False stopped : False crc32 : badb3751 conf_on_shared_storage : True local_conf_timestamp : 434247 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=434247 (Wed Aug 31 14:37:45 2022) host-id=3 score=3400 vm_conf_refresh_time=434247 (Wed Aug 31 14:37:45 2022) conf_on_shared_storage=True maintenance=False state=EngineDown stopped=False --== Host ovirt-node4.ovirt (id: 4) status ==-- Host ID : 4 Host timestamp : 1646655 Score : 3400 Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : ovirt-node4.ovirt Local maintenance : False stopped : False crc32 : 1a16027e conf_on_shared_storage : True local_conf_timestamp : 1646655 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=1646655 (Wed Aug 31 14:37:43 2022) host-id=4 score=3400 vm_conf_refresh_time=1646655 (Wed Aug 31 14:37:43 2022) conf_on_shared_storage=True maintenance=False state=EngineUp stopped=False The problem is that ovirt-node1.ovirt is not anymore in ther cluster, in the host list presented by the ui there is correctly no ovirt-node1, the ovirt-node1 appears only in the commandline. I did a full text search in the engine DB, but node1 doesn't appear anywhere, even in the filesystem, a grep doesn't find anything

2 5

Ovirt Windows VM Provisioning with Terraform and Sysprep
by venkatar＠emiratesnbd.com 08 Sep '22

08 Sep '22

Hi All, Did anyone tried automated deployment of windows VM in ovirt using terraform ovirt provider (https://github.com/oVirt/terraform-provider-ovirt) We are able to provision the Linux VM, want to check if anyone tried windows VM. I have sample sysprep script which will assign IP,Set hostname and password. I couldn't find anything related over internet for the same. Thanks Ravi

1 0

Engine and host certificates expired
by simon＠justconnect.ie 08 Sep '22

08 Sep '22

I have an environment where the engine wouldn’t start and the certificate expiry dates were as follows. Host1 - 25th Sep 2022 Host2 - 11th Aug 2022 Host3 - 11th Aug 2022 I copied the vdsm certs from Host1 to Host2 & Host3 Engine then started on Host1 and then backed up. Engine cert expiry 11th Aug 2022 I put the cluster into Global Maintenance mode and then tried: ‘engine-setup —offline’ Which failed as the validation check said the engine wasn’t in Global Maintenance mode even though ‘hosted-engine —vm-status said it was. None of the Hosts are ‘GREEN’ (can’t remember what the status was as I’m writing this from memory) but their status is ’RED’. There are VMs running on the 3 Hosts and I’m reluctant to restart anything at the moment. Is there a way to refresh the engine certificate to get past this or do I need to restart vdsm service on each host to bring them back online as far as the engine is concerned? The environment is currently at 4.4.6 and is to be upgraded to 4.5.2 next month. Any help as always will be greatly appreciated. Kind regards Simon

3 9

oVirt 4.5.2.4 api access with keycloak
by Don Dupuis 07 Sep '22

07 Sep '22

Hello I have installed ovirt 4.5.2.4 and keycloak authentication is now standard. On previous installs it could be accessed via a web browser as https://engine_FQDN/ovirt-engine/api. What is the proper url syntax to work with the new keycloak way and I know the username is now admin@ovirt @internalsso? Thanks Don

4 3

VDSNetworkException: protocol version not accepted by client
by Kilian Ries 07 Sep '22

07 Sep '22

Hi, im running an oVirt 4.2.8 cluster with two nodes. A few days ago, my SSL certificates expired. After that, i changed all the certificates on the engine via "engine-upgrade" command and issued new vdsm client certificates. Then i copied the new certificates to my ovirt nodes and restarted vdsmd (systemctl restart vdsmd). Now i'm still not able to connect to my ovirt nodes. In the engine log i can see the following error: ### 2022-09-01 18:25:51,822+02 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.xx.xx 2022-09-01 18:25:51,827+02 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages The server selected protocol version TLS10 is not accepted by client preferences [TLS12] 2022-09-01 18:25:51,829+02 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-88) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: The server selected protocol version TLS10 is not accepted by client preferences [TLS12] ### I searched my vdsm client config but i cannot see any specific TLS version set (every option with TLS is commented - seems to be the default): ### $grep -R -i TLS /etc/vdsm/ /etc/vdsm/vdsm.conf:# ssl_protocol = tlsv1 /etc/vdsm/vdsm.conf:# https://docs.python.org/2/library/ssl.html. e.g. OP_NO_TLSv1, /etc/vdsm/vdsm.conf:# OP_NO_TLSv1_1 By default tlv1, tlsv1.1 and tlsv1.2 are enabled. ### On the engine i didn't find any setting to set a specific TLS version - there seems to have been a setting (VdsmSSLProtocol) but that got deprecated years ago. Does anybody know why my engine is still not able to connect to the client vdsmd? I also tried to set "ssl_protocol = tlsv1" via vdsm.conf but that didn't work ... Thanks Regards, Kilian PS: Name : vdsm Architektur : x86_64 Version : 4.19.37 Ausgabe : 1.el7.centos Name : ovirt-engine Architektur : noarch Version : 4.2.8.2 Ausgabe : 1.el7

2 2

oVirt 4.5.2 - ovirt-hosted-engine-setup fails with "error: Must be number, not str"}]" when creating ovirtmgmt network
by Thomas Simmons 06 Sep '22

06 Sep '22

Hello, I am trying to deploy the latest oVirt (4.5.2), on a fully patched Rocky 8.6 system and am having and issue where "ovirt-hosted-engine-setup" is failing when it tries to create the ovirtmgmt network with the error "error: Must be number, not str"}]". When this happens, the engine setup pauses and if I can login to the bootstrap engine UI and when I attempt to manually assign the ovirtmgmt network to the correct nic on the host, I get the same error message. This server has (2) active network interfaces - a gigabit NIC that will be a VM network for all networks except gluster and migration and a 40Gbps Infiniband adapter in connected mode (IPoIB) for gluster and migration (I previously had these servers in the same hardware configuration running oVirt 4.3 on CentOS 7 and would like to have the same setup again - just with latest versions of EL and oVirt). I don't believe it's related, however for transparency I should note that the server is running kernel-lt from elrepo (5.4.212-1.el8.elrepo.x86_64) because both native EL and elrepo support for my Infiniband HBA was dropped in the standard EL8 kernel due to known bugs with that version of the kernel. Thanks in advance for any assistance. Here is the specific error from engine.log on the bootstrap engine. I see similar messages in vdsm.log on the host. 2022-09-04 18:01:10,725-04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] START, HostSetupNetworksVDSCommand(HostName = vmh1.my.domain.com, HostSetupNetworksVdsCommandParameters:{hostId='1def9b77-b268-4a64-bac0-3e51c1d16b10', vds='Host[vmh1.my.domain.com,1def9b77-b268-4a64-bac0-3e51c1d16b10]', rollbackOnFailure='true', commitOnSuccess='true', connectivityTimeout='120', networks='[HostNetwork:{defaultRoute='true', bonding='false', networkName='ovirtmgmt', vdsmName='ovirtmgmt', nicName='enp3s0', vlan='null', vmNetwork='true', stp='false', properties='null', ipv4BootProtocol='STATIC_IP', ipv4Address='10.10.65.101', ipv4Netmask='255.255.255.0', ipv4Gateway='10.10.65.1', ipv6BootProtocol='NONE', ipv6Address='null', ipv6Prefix='null', ipv6Gateway='null', nameServers='null'}]', removedNetworks='[]', bonds='[]', removedBonds='[]', clusterSwitchType='LEGACY', managementNetworkChanged='true'}), log id: 6bc2c376 2022-09-04 18:01:10,726-04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] FINISH, HostSetupNetworksVDSCommand, return: , log id: 6bc2c376 2022-09-04 18:01:11,251-04 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"}] 2022-09-04 18:01:11,252-04 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Failed in 'HostSetupNetworksVDS' method 2022-09-04 18:01:11,252-04 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"}] 2022-09-04 18:01:11,261-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM vmh1.my.domain.com command HostSetupNetworksVDS failed: Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"} 2022-09-04 18:01:11,261-04 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Error: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"}, code = -32603 2022-09-04 18:01:11,261-04 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Command 'HostSetupNetworksVDSCommand(HostName = vmh1.my.domain.com, HostSetupNetworksVdsCommandParameters:{hostId='1def9b77-b268-4a64-bac0-3e51c1d16b10', vds='Host[vmh1.my.domain.com,1def9b77-b268-4a64-bac0-3e51c1d16b10]', rollbackOnFailure='true', commitOnSuccess='true', connectivityTimeout='120', networks='[HostNetwork:{defaultRoute='true', bonding='false', networkName='ovirtmgmt', vdsmName='ovirtmgmt', nicName='enp3s0', vlan='null', vmNetwork='true', stp='false', properties='null', ipv4BootProtocol='STATIC_IP', ipv4Address='10.10.65.101', ipv4Netmask='255.255.255.0', ipv4Gateway='10.10.65.1', ipv6BootProtocol='NONE', ipv6Address='null', ipv6Prefix='null', ipv6Gateway='null', nameServers='null'}]', removedNetworks='[]', bonds='[]', removedBonds='[]', clusterSwitchType='LEGACY', managementNetworkChanged='true'})' execution failed: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"}, code = -32603 2022-09-04 18:01:11,262-04 INFO [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Host setup networks finished. Lock released. Monitoring can run now for host 'vmh1.my.domain.com' from data-center 'Default' 2022-09-04 18:01:11,262-04 ERROR [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Command 'org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': "Attempt to call function: <bound method Global.setupNetworks of <vdsm.API.Global object at 0x7fb24046f240>> with arguments: ({'ovirtmgmt': {'netmask': '255.255.255.0', 'ipv6autoconf': False, 'nic': 'enp3s0', 'bridged': 'true', 'ipaddr': '10.10.65.101', 'defaultRoute': True, 'dhcpv6': False, 'STP': 'no', 'gateway': '10.10.65.1', 'mtu': 1500, 'switch': 'legacy'}}, {}, {'connectivityTimeout': 120, 'commitOnSuccess': True, 'connectivityCheck': 'true'}) error: Must be number, not str"}, code = -32603 (Failed with error unexpected and code 16) 2022-09-04 18:01:11,263-04 INFO [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] Lock freed to object 'EngineLock:{exclusiveLocks='[HOST_NETWORK1def9b77-b268-4a64-bac0-3e51c1d16b10=HOST_NETWORK]', sharedLocks=''}' 2022-09-04 18:01:11,269-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [2a6921b2] EVENT_ID: SETUP_NETWORK_FAILED_FOR_MANAGEMENT_NETWORK_CONFIGURATION(1,120), Failed to configure management network on host vmh1.my.domain.com due to setup networks failure.

1 1