June 2023 - Users - oVirt List Archives

VM migration failed after upgrade to 4.4
by joris dedieu 20 Jun '23

20 Jun '23

Hi list, I'm troubleshooting an issue with live migration on an upgrade context. I have a 4.3 cluster that I try to upgrade in 4.4. The engine is OK in 4.4 and I already have upgraded a single host which had kindly reintegrated the cluster. The host is OK. I can start vms on it and migrate vms from it to other hosts. But, if I try to migrate a vm from a 4.3 host to the 4.4 host, it failed with : * on the host : qemu-kvm: terminating on signal 15 from pid XXXX (<unknown process>) * on the engine : VM 'VM_UUID' was unexpectedly detected as 'Down' on VDS 'HOST_UUID' Does anyone here can help me to find what's goning on ? I will be greate regards Joris

3 2

Cannot start VM with vGPU (NVIDIA)
by pawel.osadtschy01＠dhl.com 20 Jun '23

20 Jun '23

Hi, need a help! may be the problem is very simple, but I've not found solution: -oVirt 4.5.4 on RHEL 8.7 -amd_iommu is on on the Host with Nvidia Card A40 I can see my cards in vGPU Settings for Windows VMs (Windows 10 Pro). Without activation of the vGPU device VM started normally. With one active vGPU card VM cannot start. Error message on the Host: Jun 07 13:39:51 depotlsa8ovh1 kernel: [nvidia-vgpu-vfio] e80ae200-4cea-4213-9e78-ebf0b86a756a: start failed. status: 0x0 Timeout Occured Jun 07 13:39:51 depotlsa8ovh1 libvirtd[3278]: Kann nicht vom Monitor lesen: Die Verbindung wurde vom Kommunikationspartner zurückgesetzt Jun 07 13:39:51 depotlsa8ovh1 libvirtd[3278]: Interner Fehler: qemu unexpectedly closed the monitor: 2023-06-07T11:39:51.494056Z qemu-kvm: -device vfio-pci-nohotplug,id=hostdev0,sysfsdev=/sys/bus/mdev/devices/e80ae200-4cea-4213-9e78-ebf0b86a756a,display=on,ramfb=on,bus=pci.7,addr=0x0: vfio e80ae200-4cea-4213-9e78-ebf0b86a756a: error getting device from group 156: Connection timed out. Verify all devices in group 156 are bound to vfio-<bus> or pci-stub and not already in use. Looks like libvirtd cannot get any device. Is it problem of Nvidia settings on the host or Problem of VM settings? Thank you Paolo

3 3

Re: Resending with Log: Hosted Engine Deploy Fails at "Waiting for Host to be up"
by Gilboa Davara 16 Jun '23

16 Jun '23

Hello, I'm seeing the same when trying to install nightly on high-end server (Either direct over NFS or gluster cluster). Seems that oVirt deployment fails to change the HE IP address after deployment. I'm thinking about trying other options, such as switching to Oracle (Ugh!) / oVirt 4.4 which seems to be stable and has long term support. - Gilboa On Sun, Jun 11, 2023 at 4:30 PM Angel, Christopher < christopher.angel(a)usask.ca> wrote: > I’ve installed 3 Ovirt Nodes and am trying to set up the hosted engine. > Every time I run it however, it fails at the ‘Waiting for host to be up’ > stage. I’ve attached the relevant log. > > > > -- > > Christopher Angel, B.Eng, B.Sc > > Laboratory Systems Analyst, Computer Science Department > > University of Saskatchewan > > Christopher.angel(a)usask.ca > > 3069661434 > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/VN7NXEPRDA7O2… >

1 0

Unable to find a match: cockpit-ovirt-dashboard
by R A 15 Jun '23

15 Jun '23

Hello, maybe someone can help me. I am using ovirt 4.5 standalone engine with local database on Rocky Linux 9 on Server A. On Server B, C and D i ve installed ovirt Node 4.5 and now i want to user Gluster Hyperconverged via cockpit with 4 Server (one for standalone engine) Ovirt 4.5 Standalone Engine is already running on Server A. My Problem is i cant download cockpit-ovirt-dashboard [root@pluto volrath]# yum install cockpit-ovirt-dashboard Last metadata expiration check: 1:41:33 ago on Thu Jun 15 19:36:53 2023. No match for argument: cockpit-ovirt-dashboard Error: Unable to find a match: cockpit-ovirt-dashboard The instructions in Section "Installing on RHEL 9.0 or derivates" from here https://www.ovirt.org/download/install_on_rhel.html are done. But i am still not able to finde the cockpit-plugin. Ansible-Runner ist installed too. What i am missing? Or does Rocky Linux do not support the Cockpit-Plugin? BR Peter

1 0

Re: Resending with Log: Hosted Engine Deploy Fails at "Waiting for Host to be up"
by Thomas Hoberg 15 Jun '23

15 Jun '23

I have seen this type of behavior when building a HCI cluster on Atoms. The problem is that at this poing the machine that is generated for the management engine has a machine type that is above what is actually supported in hardware. Since it's not the first VM that is run during the setup process, it's not really intuitive but the libvirt configuration for that prototypical management engine is created by code that assumes to modern a default (I never found the source, but since all development has ceased it won't matter any more). While modern Atoms are actually more like Core CPUs in terms of the instruction set they support, my Goldmont Plus/Gemini Lake Atoms were regarded by KVM as next to a Nehalem CPU and the VM would refuse to start. It's very hard to find in the logs, because it is actually a KVM issue (created by the oVirt ME creation mechanism, of couse). I got out of that fix using removable storage: I had the setup run on an i7-7700k (was a bit faster, too) and then changed the machine type of the management engine (and lowest common denominator for the cluster) to Nehalem before transplanting the SSD back into the Atom. I've gone through that excercise with ovirt 4.3 and again with Oracle's 4.4 variant, which is by far the most stable oVirt/RHEV available right now.

1 0

Windows VMs pause ofte when disk images are located on CephFS storage
by change_jeeringly679＠dralias.com 15 Jun '23

15 Jun '23

Hey guys, I have tried to write on the IRC channel, regarding this issue, but I'm no sure if I'm not doing it right or maybe there are not many people watching the #ovirt channel. We have deployed a 6 node oVirt cluster, and have moved roughly 100 VMs on them. We started the cluster with NFS storage, which we were building and testing with our Ceph cluster. The Ceph has been ready for a few months now, and we have tested running oVirt VMs on it using RBD, CephFS and by using the NFS Ganesha server which can be enabled on Ceph. Initially I tested with RBD using the cinderlib functionality in oVirt. This appears to be working fine, and I can live with the fact tha live storage migrations from posix storage are not possible. The biggest hurdle vi encountered are, that the backup APIs in oVirt cannot be used to create a backup and download the backups. This breaks our RHV Veeam backup solution, which we have grown quite fond of. But even my homegrown backup solutions from earlier don't work either, as they use the APIs. For this reason we have now changed to CephFS. It has a different set of problems, as we can only supply 1 monitor when mounting the CephFS storage, making i less robust as it should be. It is also making metadata storage dependent on the MDS. As far as I understand, is data access still connecting to the OSDs where it resides directly. I have multiple MDS containers on the Ceph cluster for loadbalancing and redundancy, but it still feels less tidy than RBD with native Ceph support. The good thing is, that as CephFS is a POSIX filesystem, the backup APIs work and so does Veeam backup. The biggest problems I am struggling with, is the unexplained pausing of exclusively VMs running the Windows Operating system. This is why I didn't notice issues initially, as I have been testing the storage with Linux VMs. The machines pause at a random moment in time with a "Storage Error". I cannot resume the machine, not even using virsh on the host it is running on. The only thing I can do is power it off, and reboot. And in many cases, it then pauses during the boot process. I have been watching the VDSM logs, and couldn't work out why this happens. When I move the disk to plain NFS storage (not on Ceph), this never happens. The result is that most Windows based VMs have not been moved yet to CephFS. I have 0 occurrences of this happening with Linux VMs, of which I have many (I think we have 80 linux VMs vs 20 Windows VMs). The Ceph cluster does not show and problems before, during or after this happening. Is there anyone with experience wih oVirt and Ceph, that can share experiences or help me find the root cause of this problem? I have a couple of things I can progress wih: 1. Move a couple of Windows VMs to RBD, and install a Veeam agent on the servers instead. This is just opening a new can of worms, as it requires some work on the servers each time I add a new server and I also need to make network openings from the server to the backup repos. It is just a little less neat than the RHV Veeam backup solution using the hypervisor. 2. Move a couple of Windows VMs to the NFS Ganesha implementation. This means ALL traffic is going through the NFS containers created on the Ceph cluster, and I loose the distributed nature of the oVirt hosts talking direcly to the OSDs on the Ceph cluster. If I was to go this way, I should probably create some NFS Ganesha servers that connect to Ceph natively on the one end and provide NFS services to oVirt. Both tests would still test Ceph, but using an alternative method to CephFS. My preferred solution really is 1., was it not for the backup APIs being rendered useless. Is work still being carried out on development in these areas, or has oVirt/Ceph development ceased? Thoughts and comments are welcome. Looking forward to sparring with someone that has experience with this :-) With kind regards Jelle

1 0

RHEL 9 (rocky/centos/..) guest console problem
by marek 15 Jun '23

15 Jun '23

hi, i know spice/QXL is deprecated so, i have guest VM with console config VGA/VNC (tried Bochs/VNC too) virt-viewer from windows cannot connect to console ("console" button in ovirt admin) if i use VNC params from "console.vv" i can connect to it with tigerVNC client (tightVNC does not work) any ideas what can be wrong? btw is there option to prolong password in console.vv? there is note in the file "# Password is valid for 120 seconds." Marek

3 3

Trying to recover local domain from failed host
by Tim Tuck 15 Jun '23

15 Jun '23

Hi all, I had a catastrophic failure of a host with but the disk with the domain on it is fine. I've put the disk in a new machine, mounted it on /backups and I can see this structure ... [root@max backups]# ls -laR * 2f2da2d7-596f-4a53-8a1b-a301f84b3b74: total 20 drwxr-xr-x. 5 vdsm kvm 4096 Sep 15 2020 . drwxr-xr-x. 4 vdsm kvm 4096 Jun 10 11:53 .. drwxr-xr-x. 2 vdsm kvm 4096 Sep 15 2020 dom_md drwxr-xr-x. 23 vdsm kvm 4096 May 20 11:35 images drwxr-xr-x. 4 vdsm kvm 4096 Sep 15 2020 master 2f2da2d7-596f-4a53-8a1b-a301f84b3b74/dom_md: total 32780 drwxr-xr-x. 2 vdsm kvm 4096 Sep 15 2020 . drwxr-xr-x. 5 vdsm kvm 4096 Sep 15 2020 .. -rwxr-xr-x. 1 vdsm kvm 0 Sep 15 2020 ids -rwxr-xr-x. 1 vdsm kvm 16777216 Sep 15 2020 inbox -rwxr-xr-x. 1 vdsm kvm 0 Sep 15 2020 leases -rwxr-xr-x. 1 vdsm kvm 486 Sep 15 2020 metadata -rwxr-xr-x. 1 vdsm kvm 16777216 Sep 15 2020 outbox 2f2da2d7-596f-4a53-8a1b-a301f84b3b74/images: total 92 drwxr-xr-x. 23 vdsm kvm 4096 May 20 11:35 . drwxr-xr-x. 5 vdsm kvm 4096 Sep 15 2020 .. drwxr-xr-x. 2 vdsm kvm 4096 Feb 3 2021 1eb2b682-ef45-409d-9341-abcf61418619 drwxr-xr-x. 2 vdsm kvm 4096 Aug 11 2022 283838fd-43b5-42b9-a332-a7b980613188 drwxr-xr-x. 2 vdsm kvm 4096 Oct 4 2020 36237183-54a2-4232-b0b3-6d1a9457c23a drwxr-xr-x. 2 vdsm kvm 4096 Jan 5 2022 366e7b29-2123-45c0-9190-dafead431651 drwxr-xr-x. 2 vdsm kvm 4096 May 20 09:29 3ea98df5-3ee8-4d21-8607-94284e7fff37 drwxr-xr-x. 2 vdsm kvm 4096 May 20 09:29 44c3611b-1205-48ca-9a84-007eaae03cbb drwxr-xr-x. 2 vdsm kvm 4096 May 18 23:49 674b364c-b74a-4fff-a38b-ca1089103241 drwxr-xr-x. 2 vdsm kvm 4096 Oct 15 2021 6949a9e0-4cc0-4eee-be99-e88795cd6447 drwxr-xr-x. 2 vdsm kvm 4096 Jan 5 2022 8b618bad-6dfb-48de-90ad-f325bf50cd45 drwxr-xr-x. 2 vdsm kvm 4096 Feb 6 2021 91f1f606-0f26-4ef0-a2fe-cccde6c78e89 drwxr-xr-x. 2 vdsm kvm 4096 May 20 11:35 94f4bf41-2b2f-42bc-ae21-0e80205ba19a drwxr-xr-x. 2 vdsm kvm 4096 May 20 11:35 a18f0c48-b3ac-4b89-9e52-fddaddbc8f4a drwxr-xr-x. 2 vdsm kvm 4096 May 26 15:51 ac4a428d-961e-46ae-a279-f282fd9ecf94 drwxr-xr-x. 2 vdsm kvm 4096 May 26 15:51 ba1a624c-6995-4109-b770-7bbd1efc340e drwxr-xr-x. 2 vdsm kvm 4096 Sep 15 2020 dec14b5b-69fe-4c51-abb4-d8296c547a0b drwxr-xr-x. 2 vdsm kvm 4096 Sep 15 2020 e7a17f3b-7567-4c90-b58e-18f34d4686c0 drwxr-xr-x. 2 vdsm kvm 4096 May 20 09:29 ea786bee-b98e-44c0-a44a-a63af63b8c51 drwxr-xr-x. 2 vdsm kvm 4096 Apr 21 2021 ec37f395-3b4b-41df-8f5b-8a22b7e1273b drwxr-xr-x. 2 vdsm kvm 4096 Feb 25 2022 f3e641c7-a2cc-42af-bcd1-b5ecdf437e03 drwxr-xr-x. 2 vdsm kvm 4096 May 18 23:55 f4c221a6-6ce4-44cc-8d32-d673e40aa915 drwxr-xr-x. 2 vdsm kvm 4096 May 20 11:35 f539c098-3f16-410f-938f-3de6ef37b017 2f2da2d7-596f-4a53-8a1b-a301f84b3b74/images/1eb2b682-ef45-409d-9341-abcf61418619: total 104857624 drwxr-xr-x. 2 vdsm kvm 4096 Feb 3 2021 . drwxr-xr-x. 23 vdsm kvm 4096 May 20 11:35 .. -rwxr-xr-x. 1 vdsm kvm 107374182400 Feb 3 2021 e29b005f-d272-49f8-a162-41f908ca67a4 -rwxr-xr-x. 1 vdsm kvm 300 Feb 3 2021 e29b005f-d272-49f8-a162-41f908ca67a4.meta 2f2da2d7-596f-4a53-8a1b-a301f84b3b74/images/283838fd-43b5-42b9-a332-a7b980613188: total 23223760 drwxr-xr-x. 2 vdsm kvm 4096 Aug 11 2022 . drwxr-xr-x. 23 vdsm kvm 4096 May 20 11:35 .. -rwxr-xr-x. 1 vdsm kvm 23781113856 Aug 11 2022 3273221e-1649-4e4a-816c-2ffec18e51c7 -rwxr-xr-x. 1 vdsm kvm 251 Aug 11 2022 3273221e-1649-4e4a-816c-2ffec18e51c7.meta . . etc So... is there a way to get this back ? I tried "Import Domain" both with the disk manually mounted and unmounted, both failed and I get errors in the vdsm.log like this... 2023-06-15 15:57:55,166+1000 INFO (jsonrpc/0) [storage.StorageServer.MountConnection] Creating directory '/rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74' (storageServer:167) 2023-06-15 15:57:55,166+1000 INFO (jsonrpc/0) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74 mode: None (fileUtils:201) 2023-06-15 15:57:55,166+1000 INFO (jsonrpc/0) [storage.Mount] mounting /backups/2f2da2d7-596f-4a53-8a1b-a301f84b3b74 at /rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74 (mount:207) 2023-06-15 15:57:55,176+1000 ERROR (jsonrpc/0) [storage.HSM] Could not connect to storageServer (hsm:2374) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2371, in connectStorageServer conObj.connect() File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 180, in connect six.reraise(t, v, tb) File "/usr/lib/python3.6/site-packages/six.py", line 693, in reraise raise value File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 171, in connect self._mount.mount(self.options, self._vfsType, cgroup=self.CGROUP) File "/usr/lib/python3.6/site-packages/vdsm/storage/mount.py", line 210, in mount cgroup=cgroup) File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 56, in __call__ return callMethod() File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 54, in <lambda> **kwargs) File "<string>", line 2, in mount File "/usr/lib64/python3.6/multiprocessing/managers.py", line 772, in _callmethod raise convert_to_error(kind, result) vdsm.storage.mount.MountError: Command ['/usr/bin/mount', '-t', 'posix', '/backups/2f2da2d7-596f-4a53-8a1b-a301f84b3b74', '/rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74'] failed with rc=32 out=b'' err=b"mount: /rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74: unknown filesystem type 'posix'.\n" 2023-06-15 15:57:55,176+1000 INFO (jsonrpc/0) [storage.StorageDomainCache] Invalidating storage domain cache (sdc:74) 2023-06-15 15:57:55,176+1000 INFO (jsonrpc/0) [vdsm.api] FINISH connectStorageServer return={'statuslist': [{'id': '00000000-0000-0000-0000-000000000000', 'status': 477}]} from=::ffff:172.20.1.160,47702, flow_id=6693c76d-b62b-4e62-9b70-c87f2a199705, task_id=682abcff-3040-46d7-aaa1-f2445f0a6698 (api:54) 2023-06-15 15:57:55,283+1000 INFO (jsonrpc/2) [vdsm.api] START disconnectStorageServer(domType=6, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '********', 'vfs_type': 'posix', 'port': '', 'iqn': '', 'connection': '/backups/2f2da2d7-596f-4a53-8a1b-a301f84b3b74', 'ipv6_enabled': 'false', 'id': '00000000-0000-0000-0000-000000000000', 'user': '', 'tpgt': '1'}]) from=::ffff:172.20.1.160,47702, flow_id=0d3d4a3e-3523-4436-93b3-e22bff47f082, task_id=11870123-365d-4b40-b481-be5d44098fc2 (api:48) 2023-06-15 15:57:55,284+1000 INFO (jsonrpc/2) [storage.Mount] unmounting /rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74 (mount:215) 2023-06-15 15:57:55,290+1000 ERROR (jsonrpc/2) [storage.HSM] Could not disconnect from storageServer (hsm:2480) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2476, in disconnectStorageServer conObj.disconnect() File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 202, in disconnect self._mount.umount(True, True) File "/usr/lib/python3.6/site-packages/vdsm/storage/mount.py", line 217, in umount umount(self.fs_file, force=force, lazy=lazy, freeloop=freeloop) File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 56, in __call__ return callMethod() File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 54, in <lambda> **kwargs) File "<string>", line 2, in umount File "/usr/lib64/python3.6/multiprocessing/managers.py", line 772, in _callmethod raise convert_to_error(kind, result) vdsm.storage.mount.MountError: Command ['/usr/bin/umount', '-f', '-l', '/rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74'] failed with rc=32 out=b'' err=b'umount: /rhev/data-center/mnt/_backups_2f2da2d7-596f-4a53-8a1b-a301f84b3b74: no mount point specified.\n' 2023-06-15 15:57:55,290+1000 INFO (jsonrpc/2) [storage.StorageDomainCache] Refreshing storage domain cache (resize=False) (sdc:80) 2023-06-15 15:57:55,290+1000 INFO (jsonrpc/2) [storage.ISCSI] Scanning iSCSI devices (iscsi:442) 2023-06-15 15:57:55,328+1000 INFO (jsonrpc/2) [storage.ISCSI] Scanning iSCSI devices: 0.04 seconds (utils:390) 2023-06-15 15:57:55,328+1000 INFO (jsonrpc/2) [storage.HBA] Scanning FC devices (hba:60) 2023-06-15 15:57:55,416+1000 INFO (jsonrpc/2) [storage.HBA] Scanning FC devices: 0.09 seconds (utils:390) 2023-06-15 15:57:55,416+1000 INFO (jsonrpc/2) [storage.Multipath] Waiting until multipathd is ready (multipath:112) 2023-06-15 15:57:57,458+1000 INFO (jsonrpc/2) [storage.Multipath] Waited 2.04 seconds for multipathd (tries=2, ready=2) (multipath:139) 2023-06-15 15:57:57,458+1000 INFO (jsonrpc/2) [storage.StorageDomainCache] Refreshing storage domain cache: 2.17 seconds (utils:390) 2023-06-15 15:57:57,458+1000 INFO (jsonrpc/2) [vdsm.api] FINISH disconnectStorageServer return={'statuslist': [{'id': '00000000-0000-0000-0000-000000000000', 'status': 477}]} from=::ffff:172.20.1.160,47702, flow_id=0d3d4a3e-3523-4436-93b3-e22bff47f082, task_id=11870123-365d-4b40-b481-be5d44098fc2 (api:54) 2023-06-15 15:57:57,458+1000 INFO (jsonrpc/2) [jsonrpc.JsonRpcServer] RPC call StoragePool.disconnectStorageServer took more than 1.00 seconds to succeed: 2.18 (__init__:316) any help appreciated thanks Tim

1 0

self-hosted engine with Local Storage
by Jorge Visentini 14 Jun '23

14 Jun '23

Hello. I know that there is no logic, that there is no HA, redundancy and all that... but is there any possibility that I can deploy the oVirt self-hosted engine using an array of local disks on the host? *In my scenario I don't need to have HA.* *What I need:* 1 host with a self-hosted mechanism on a local domain store, that's all. On this host I will locally run some old VMs. Isolated VMs. -- Att, Jorge Visentini +55 55 98432-9868

2 7

oVirt 4.4 - High Performance VMs with Direct LUN attached disks pause when an upstream SAN path failed
by angus＠ajct.uk 14 Jun '23

14 Jun '23

Hello Our SAN engineer performed some maintenance during which time the KVM host lost 2 of the 4 paths to storage. My High Performance VMs with Direct LUN disks with SCSI-Pass-Through enabled paused and had to be rebooted resolve. Other VMs (not High Performance, no Direct LUN disks) on the same host were unaffected. What do you think? Thanks Angus

1 0

Cinder and Managed Block Storage
by Jorge Visentini 12 Jun '23

12 Jun '23

Is it still possible to configure cinder to use Managed Block Storage? If yes, is there a particular setting or can I just stick to Cinder's default setting? Thanks all. -- Att, Jorge Visentini +55 55 98432-9868

2 1

Had issue with storage and now storage domain won't mount VMs are in unknown status
by jsmith1299＠live.com 12 Jun '23

12 Jun '23

Hi All, We have an odd setup in out environment but each storage data center has one host and one storage domain. We had an issue with the storage domain attached to a host. After the reboot I am seeing in the vdsm logs over and over again vmrecovery 2023-06-09 21:01:30,419+0000 INFO (periodic/2) [vdsm.api] START repoStats(domains=()) from=internal, task_id=40f5b198-cb82-4ba2-8c20-b8cee34a7f47 (api:48) 2023-06-09 21:01:30,420+0000 INFO (periodic/2) [vdsm.api] FINISH repoStats return={} from=internal, task_id=40f5b198-cb82-4ba2-8c20-b8cee34a7f47 (api:54) 2023-06-09 21:01:30,810+0000 INFO (vmrecovery) [vdsm.api] START getConnectedStoragePoolsList(options=None) from=internal, task_id=74b1a1cf-fab1-4918-b0da-b3fd152d9d1a (api:48) 2023-06-09 21:01:30,811+0000 INFO (vmrecovery) [vdsm.api] FINISH getConnectedStoragePoolsList return={'poollist': []} from=internal, task_id=74b1a1cf-fab1-4918-b0da-b3fd152d9d1a (api:54) 2023-06-09 21:01:30,811+0000 INFO (vmrecovery) [vds] recovery: waiting for storage pool to go up (clientIF:723) I've also checked the firewall and it is still disabled. systemctl status libvirtd ● libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/libvirtd.service.d └─unlimited-core.conf Active: active (running) since Fri 2023-06-09 20:51:11 UTC; 16min ago Docs: man:libvirtd(8) https://libvirt.org Main PID: 4984 (libvirtd) Tasks: 17 (limit: 32768) Memory: 39.7M CGroup: /system.slice/libvirtd.service └─4984 /usr/sbin/libvirtd --listen Jun 09 20:51:11 hlkvm01 systemd[1]: Starting Virtualization daemon... Jun 09 20:51:11 hlkvm01 systemd[1]: Started Virtualization daemon. ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2023-06-09 20:53:11 UTC; 14min ago Process: 10496 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) Main PID: 10587 (vdsmd) Tasks: 39 Memory: 79.5M CGroup: /system.slice/vdsmd.service └─10587 /usr/bin/python2 /usr/share/vdsm/vdsmd Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|596001c3-33e7-44a4-bdf9-0b53ab1dd810' args={'596001c3-33e7-44a4-bdf9-0b53ab1dd810': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-2283890943663580625', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '596001c3-33e7-44a4-bdf9-0b53ab1dd810', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893978', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|87155499-1e10-4228-aa69-7c487007746e' args={'87155499-1e10-4228-aa69-7c487007746e': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-5453960159391982695', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '87155499-1e10-4228-aa69-7c487007746e', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893973', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|0ec7a66d-fac2-4a4a-a939-e05fc7b097b7' args={'0ec7a66d-fac2-4a4a-a939-e05fc7b097b7': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-1793949836195780752', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '0ec7a66d-fac2-4a4a-a939-e05fc7b097b7', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893976', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|9c8802c3-c7c9-473c-bbfb-abb0bd0f8fdb' args={'9c8802c3-c7c9-473c-bbfb-abb0bd0f8fdb': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-1144924804541449415', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '9c8802c3-c7c9-473c-bbfb-abb0bd0f8fdb', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893971', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|f799c326-9969-4892-8d67-3b1229baf0ef' args={'f799c326-9969-4892-8d67-3b1229baf0ef': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '5564598485369155833', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': 'f799c326-9969-4892-8d67-3b1229baf0ef', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893980', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|e9311d9f-d770-458b-b5ad-cdc2eb35f1bd' args={'e9311d9f-d770-458b-b5ad-cdc2eb35f1bd': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-5622951617346770490', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': 'e9311d9f-d770-458b-b5ad-cdc2eb35f1bd', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893972', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|1fc4ddad-203f-4cdf-9cb3-c3d66fb97c87' args={'1fc4ddad-203f-4cdf-9cb3-c3d66fb97c87': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-1397731328049024241', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '1fc4ddad-203f-4cdf-9cb3-c3d66fb97c87', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893981', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|321183ed-b0a6-42c7-bbee-2ad46a5f37ae' args={'321183ed-b0a6-42c7-bbee-2ad46a5f37ae': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '4398712824561987912', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '321183ed-b0a6-42c7-bbee-2ad46a5f37ae', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893970', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|731a11e8-62ba-4639-bdee-8c44b5790d82' args={'731a11e8-62ba-4639-bdee-8c44b5790d82': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-1278467655696539707', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '731a11e8-62ba-4639-bdee-8c44b5790d82', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893977', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} Jun 09 20:53:14 hlkvm01 vdsm[10587]: WARN Not ready yet, ignoring event '|virt|VM_status|411a97e6-41c7-473e-819b-04aa10bc2bf0' args={'411a97e6-41c7-473e-819b-04aa10bc2bf0': {'status': 'Down', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '0', 'type': 'vnc', 'port': '-1'}], 'hash': '-11964682092647781', 'exitMessage': 'VM terminated with error', 'cpuUser': '0.00', 'monitorResponse': '0', 'vmId': '411a97e6-41c7-473e-819b-04aa10bc2bf0', 'exitReason': 1, 'cpuUsage': '0.00', 'elapsedTime': '893975', 'cpuSys': '0.00', 'timeOffset': '0', 'clientIp': '', 'exitCode': 1}} This has been going on for hours. On the management VM I am seeing the following over and over again 2023-06-09 13:59:25,129-07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-5) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM hlkvm01 command Get Host Capabilities failed: Message timeout which can be caused by communication issues 2023-06-09 13:59:25,129-07 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-5) [] Unable to RefreshCapabilities: VDSNetworkE xception: VDSGenericException: VDSNetworkException: Message timeout which can be caused by communication issues I am able to restart the Host from the management VM (Web Console). When I try to put the host in maintenance mode I get "Error while executing action. Cannot switch Host to Maintenance mode. Hose still has running VMs on it and is in Non Responsive state" If I try to set the "Confirm host has been rebooted" I get an error saying that another power management action is already in progress. Can someone please help me out here? Is there a way to set the manage for all of the VMs to down? Anything I can do to get the storage domain back up? Thanks

1 1

Tutorial: How to Fix Struck Zombie VM Problem
by Andrei Verovski 12 Jun '23

12 Jun '23

Hi, I made short video tutorial on Youtube - how to fix struck zombie VM problem. https://www.youtube.com/watch?v=vm55caHxRj8 with best regards Andrei

1 0

how to expand a arbitrated-distributed-replicated volume
by Hans Kuhl 11 Jun '23

11 Jun '23

Hello all, how can I expand a arbitrated-distributed-replicated volume without adding additional arbiter bricks? my current gluster config is: Volume Name: data Type: Distributed-Replicate Volume ID: dcf75cf7-1937-4ce9-a7d0-46a56a3be4b4 Status: Started Snapshot Count: 0 Number of Bricks: 3 x (2 + 1) = 9 Transport-type: tcp Bricks: Brick1: gl1.lan:/gluster_bricks/sdc/sdc Brick2: gl2.lan:/gluster_bricks/sdc/sdc Brick3: gl3.lan:/gluster_bricks/sdx/sdx (arbiter) Brick4: gl2.lan:/gluster_bricks/sdd/sdd Brick5: gl3.lan:/gluster_bricks/sdc/sdc Brick6: gl1.lan:/gluster_bricks/sdx/sdx (arbiter) Brick7: gl3.lan:/gluster_bricks/sdd/sdd Brick8: gl1.lan:/gluster_bricks/sdd/sdd Brick9: gl2.lan:/gluster_bricks/sdx/sdx (arbiter)

2 1

Non responsive host (4.3.10)
by Maria Souvalioti 08 Jun '23

08 Jun '23

Hello everyone! Due to a recent major power outage in my area I now have an unresponsive self hosted host in an environment of 3 self hosted hosts. There's one vm stuck on there as well as some metadata I guess from when hosted engine was running there (before the power went down). I'm running 4.3.10 ovirt node with 3 nodes and GlusterFS, no arbiter, and I'm using it to provide services to our clients i.e. DNS, web sites, wikis, ticketing etc. and I cannot shut them down. The ovirt engine is up and running and I can manage all the other VMs that run on the other hosts through the web gui. The unresponsive host replies only to ICMP requests; in every other sense it's dead, no ssh, no gluster bricks, no console, nothing. I tried to place the faulty host in maintenance, using the option to stop glusterd, but wasn't able to as the engine won't let the host go into maintenance mode because it thinks the host has running VMs on it. The host won't go into maintenance even if I chose the "Ignore gluster quorum and self-heal validations" option. I spent last week creating a backup environment were I copied the VMs, to have somewhere to run them in case something goes terribly wrong with the systems or the gluster in the production system. I'm thinking of using the global maintenance mode and then shutting down the engine itself with *hosted-engine --vm-shutdown* and rebooting the affected host. Should I remove the host from the cluster and then re-add it or should I do something else? Thanks for any of your help!

3 4

Renew the engine certificate - egine-setup
by Fabrice Soler 08 Jun '23

08 Jun '23

Hello, We have an standalone engine version 4.3.6 and we try to renew the engine certificate. We have followed the official documentation but the engine-setup never ask us the question "Renew certificate ?" Do you have an idea ? Sincerely, -- Carte de visite DSI-DIT *Fabrice SOLER* Responsable du Département des Infrastructures Techniques (DIT) /Rectorat de la Guadeloupe - BP 480/ 97183 Les Abymes cedex *Téléphone : *0590 47 8321 +590 690 335 564 *Courriel*: www.ac-guadeloupe.fr

1 0

Rename Virtual Machine
by lavi.buchnik＠exlibrisgroup.com 08 Jun '23

08 Jun '23

Hi, We have this scenario: - VM running Centos-7 - VM running Oracle-8 Then, we shutdown and delete Centos-7 VM (verified by API and UI) Then, we rename Oracle-8 VM (via API) to have the name of the old Centos-7 VM and then stop/start Oracle-8 VM. Rename is working and VM is coming up (status is "up" from API and also in the UI). The problem is that Oracle-8 VM is not really up. it is hanging. not replying to PING nor to SSH. Seems like the root cause is this: - Oracle-8 VM name is indeed Centos-7 VM. but its FQDN (seen in UI) is still its Original name. - So when getting both Centos-7 VM name and Oracle-8 VM name status, I get an answer (via API) about both of them: Both reply with "up" I'm using a simple API to rename the VM as followed (vm_name is Oracle-8 VM name, and new_name is Centos-7 VM name): vm_id_obj = self.get_vm_id(vm_name) updated_vm = vm_id_obj.update( vm=types.Vm( name=new_name ) ) Thanks, Lavi

1 0

VM disks Block device
by hemak88＠gmail.com 08 Jun '23

08 Jun '23

LVM is used underneath the storage domain for disk management in kvm cluster on ovirt. VG which is the storage domain is visbile and active in all hosts in the same datacenter on ovirt. But, LV under this vg (that is the virtual disks of vms) is not active and the corresponding block devices of these LVs is not available on all hosts in cluster. I find only the running VMs LVs are active on the corresponding host. Is this a feature? Is it possible to get a corresponding block device and LV on all hosts in cluster?

3 2

Resending with Log: Hosted Engine Deploy Fails at "Waiting for Host to be up"
by Angel, Christopher 07 Jun '23

07 Jun '23

I've installed 3 Ovirt Nodes and am trying to set up the hosted engine. Every time I run it however, it fails at the 'Waiting for host to be up' stage. I've attached the relevant log. -- Christopher Angel, B.Eng, B.Sc Laboratory Systems Analyst, Computer Science Department University of Saskatchewan Christopher.angel(a)usask.ca<mailto:Christopher.angel@usask.ca> 3069661434

1 0

Ovirt Error after creating a VM image
by lavi.buchnik＠exlibrisgroup.com 07 Jun '23

07 Jun '23

Hi, I wrote an automation that provisioning a VM using ovirtsdk4 (we are using Ovirt 4.3). In the last week, we notice that sometimes the VM provisioning is failing with this error: "The response content type 'text/html; charset=iso-8859-1' isn't the expected XML" This error is happening when the automation is creating the VM image and waiting for its status to get change from "image-locked", this to be able to set affinity on it and later to start the new VM. So the error is happening while the image is in "image-locked" state. Can you please let me know why it is happening (note that it is occurring like 1 out of 4 attempts) and how can it get fixed? Thanks, Lavi

1 0

Unable to add more than 16 vCPUs to running VM
by David White 06 Jun '23

06 Jun '23

I have a fully patched / up-to-date engine: Software Version:4.5.4-1.el8 And a fully patched, up-to-date host. [root@cha3-storage dwhite]# yum info ovirt-hostLast metadata expiration check: 1:33:40 ago on Sun 04 Jun 2023 09:28:39 AM EDT. Installed Packages Name : ovirt-host Version : 4.5.0 Release : 3.el8 Architecture : x86_64 Size : 11 k Source : ovirt-host-4.5.0-3.el8.src.rpm Repository : @System From repo : centos-ovirt45 The host has 32GB of RAM, and there's only 1 VM on this host. When I try to add more CPUs to the VM from the manager UI, I get the following error: - The requested number of vCPUs is not available on the host the VM is running on What's going on here, and why can I not add more vCPUs to this VM? Sent with Proton Mail secure email.

2 3

oVirt 4.4 - Integrate event notifications with System Center Operations Manager
by angus＠ajct.uk 02 Jun '23

02 Jun '23

Hello I am looking to integrate oVirt 4.4 event notifications with an incident management tool - M$ System Center Operations Manager. I need to give examples to SCOM of what an unhealthy email looks like and what a recover/healthy email looks like for each event I want it to manage. Is there a way of triggering sample notifications (something failed/something recovered) for events or perhaps I can see the email templates used somewhere? (I did try a grep -Hr on the engine VM for "alertMessage" and "resolveMessage" for a VM migration notification but only found an entry in the in the notifier log. Thanks Angus

1 0

Regarding oVirt IP Address Change
by Pro Cloudguru 02 Jun '23

02 Jun '23

Hello oVIrt Community, Presently, I've a healthy & running oVirt Hosting that includes single DC, Cluster, SPM & Storage. The LAN IP Address range is 10.151.65.0/24. As we're in the process of migrating office premises, I'm worried about the existing oVirt IP Address Schema as the new range is 10.101.160/0/20. In this scenario, I'd like to know how the migration happens successfully without disturbing the oVirt Hosting & all hosted VMs. Please Guide, *Nishith N. Vyas*

1 0

novnc console error: promise.js missing?
by karl.morgan＠gmail.com 02 Jun '23

02 Jun '23

Seeing the following on the engine when attempting to start a novnc console 2023-03-31 11:57:34,988-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-29) [307c22a9] START, SetVmTicketVDSCommand(HostName = ov2node02-mn, SetVmTicketVDSCommandParameters:{hostId='19a92de3-c6e4-4f4e-be31-1d5533a2b6b6', vmId='4481b0e9-a96c-4ee7-8bd2-572558eb9fda', protocol='VNC', ticket='LMl903dd', validTime='120', userName='admin@ovirt', userId='9e88a363-34cb-466a-8ba9-25e46819423b', disconnectAction='LOCK_SCREEN', consoleDisconnectActionDelay='0'}), log id: 1d6520d5 2023-03-31 11:57:35,031-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-29) [307c22a9] FINISH, SetVmTicketVDSCommand, return: , log id: 1d6520d5 2023-03-31 11:57:35,044-07 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [307c22a9] EVENT_ID: VM_SET_TICKET(164), User admin@ovirt@internalkeycloak-authz initiated console session for VM first 2023-03-31 11:57:35,158-07 INFO [org.ovirt.engine.core.utils.servlet.ServletUtils] (default task-29) [] Can't read file '/usr/share/ovirt-engine/files/novnc/vendor/promise.js' for request '/ovirt-engine/services/files/novnc/vendor/promise.js' -- 404 Curious if this is obvious to anyone? How to resolve? ovirt-engine-webadmin-portal-4.5.4-1.el9.noarch ovirt-engine-4.5.4-1.el9.noarch

2 1

troubleshooting SHE - Run engine-setup with answerfile - ?
by lejeczek 01 Jun '23

01 Jun '23

Hi guys. I'm revisiting my failed attempt to make friends with oVirt - novice so go easy on me. Deployment fails sooner that what can troubleshoot - at least I manged to find in docs so far - and I wanted to ask hot to troubleshot such failure as this: ... INFO ] TASK [ovirt.ovirt.engine_setup : Run engine-setup with answerfile] [ ERROR ] fatal: [localhost -> 192.168.1.209]: FAILED! => {"changed": true, "cmd": ["engine-setup", "--accept-defaults", "--config-append=/root/ovirt-engine-answers"], "delta": "0:08:05.997322", "end": "2023-06-01 13:07:15.932517", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 12:59:09.935195", "stderr": "", "stderr_lines": [], "stdout": "[ INFO ] Stage: Initializing\n[ INFO ] Stage: Environment setup\n Configuration files:\n ... Start with setting up Keycloak for Ovirt Engine", "[ ERROR ] Failed to execute stage 'Closing up': Command '/usr/share/ovirt-engine-keycloak/bin/kk_cli.sh' failed to execute", "[ INFO ] Stage: Clean up", " Log file is located at", " /var/log/ovirt-engine/setup/ovirt-engine-setup-20230601125911-448xvj.log", ... [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up ... Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20230601123237-rhwx8e.log Logfile to which 'stdout' points, shows nothing or I fail to find anything in it and/or understand it: ... 2023-06-01 13:07:17,716+0100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost -> 192.168.1.209]: FAILED! => {"changed": true, "cmd": ["engine-setup", "--accept-defaults", "--config-append=/root/ovirt-engine-answers"], "delta": "0:08:05.997322", "end": "2023-06-01 13:07:15.932517", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 12:59:09.935195", "stderr": "", "stderr_lines": [], "stdout": ... or Ovirt Engine\n[ ERROR ] Failed to execute stage 'Closing up': Command '/usr/share/ovirt-engine-keycloak/bin/kk_cli.sh' failed to execute\n[ INFO ] Stage: Clean up\n Log file is located at\n /var/log/ovirt-engine/setup/ovirt-engine-setup-20230601125911-448xvj.log\n[ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20230601130714-setup.conf'\n[ INFO ] Stage: Pre-termination\n[ INFO ] Stage: Termination\n[ ERROR ] Execution of setup failed", "stdout_lines": ["[ INFO ] Stage: Initializing", "[ INFO ] Stage: Environment setup", " Configuration files:", " /etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf,", " /etc/ovirt-engine-setup.conf.d/10-packaging.conf," ... ... 2023-06-01 13:08:52,946+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'msg': "The tas k includes an option with an undefined variable. The error was: 'local_vm_ip' is undefined. 'local_vm_ip' is undefined\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/sync_on_engine_ma chine.yml': line 2, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appear s to be:\n\n---\n- name: Set the name for add_host\n ^ here\n", '_ansible_no_log': False} 2023-06-01 13:08:53,047+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 ignored: [localh ost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'local_vm_ip' is undefined. 'local _vm_ip' is undefined\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_eng ine_setup/tasks/sync_on_engine_machine.yml': line 2, column 3, but may\nbe elsewhere in the file depending on the exact syntax prob lem.\n\nThe offending line appears to be:\n\n---\n- name: Set the name for add_host\n ^ here\n"} ... 2023-06-01 13:09:16,818+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'changed': True, 'stdout': '', 'stderr': "error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208\nerror: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active", 'rc': 1, 'cmd': ['virsh', '-c', 'qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf', 'pool-destroy', '9ab14cca-78e0-4a8e-8a1b-00e98c300208'], 'start': '2023-06-01 13:09:16.614978', 'end': '2023-06-01 13:09:16.672260', 'delta': '0:00:00.057282', 'msg': 'non-zero return code', 'invocation': {'module_args': {'_raw_params': 'virsh -c qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf pool-destroy 9ab14cca-78e0-4a8e-8a1b-00e98c300208', '_uses_shell': False, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None, 'chdir': None, 'executable': None, 'creates': None, 'removes': None, 'stdin': None}}, 'stdout_lines': [], 'stderr_lines': ['error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208', "error: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active"], '_ansible_no_log': None} 2023-06-01 13:09:16,918+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 ignored: [localhost]: FAILED! => {"changed": true, "cmd": ["virsh", "-c", "qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf", "pool-destroy", "9ab14cca-78e0-4a8e-8a1b-00e98c300208"], "delta": "0:00:00.057282", "end": "2023-06-01 13:09:16.672260", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 13:09:16.614978", "stderr": "error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208\nerror: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active", "stderr_lines": ["error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208", "error: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active"], "stdout": "", "stdout_lines": []} 2023-06-01 13:09:17,023+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208] 2023-06-01 13:09:17,224+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 changed: [localhost] .. I think that last two snippets-blocks, might be most useful - but what does it says? When 'installer' is finished, there is no aforementioned pool however there is: -> $ virsh pool-list | grep '9ab14cca-78e0-4a8e-8a1b-00e98c300208' 9ab14cca-78e0-4a8e-8a1b-00e98c300208-1 active yes Engine VM remains is up & running, How far from successful deployment that is & what would be advised to do next? many thanks, L.

1 0