- Users - oVirt List Archives

Re: [Users] Otopi pre-seeded answers and firewall settings
by Giuseppe Ragusa 25 Mar '14

25 Mar '14

--_64b96cf8-fdd4-4df4-bf3e-459817379ccc_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi Joshua=2C many thanks for your suggestion which I suppose would work perfectly=2C but= I actually want iptables (CentOS 6.5 here=2C so no firewalld) rules in pla= ce all the time=2C but only "MY OWN" iptables rules =3B> Regards=2C Giuseppe Date: Tue=2C 25 Mar 2014 18:04:04 -0400 Subject: Re: [Users] Otopi pre-seeded answers and firewall settings From: josh(a)wrale.com To: giuseppe.ragusa(a)hotmail.com Perhaps you could add the iptables and firewalld packages to yum.conf as ex= cludes. I don't know if this would fail silently=2C but if so=2C the engin= e installer would never know. Thanks=2C =0A= Joshua On Tue=2C Mar 25=2C 2014 at 5:49 PM=2C Giuseppe Ragusa <giuseppe.ragusa@hot= mail.com> wrote: =0A= =0A= =0A= =0A= Hi Didi=2C many thanks for your invaluable help! I'll try your suggestion (/etc/ovirt-host-deploy.conf.d/99-prevent-iptables= .conf) asap and then I will report back. By the way: I have a really custom iptables setup (multiple separated netwo= rks on hypervisor hosts)=2C so I suppose it's best to hand tune firewall ru= les and then leave them alone (I pre-configure them=2C so the setup procedu= re won't be impeded in its communication needs anyway AND I will always gua= rantee the most stringent filtering possible with default deny ecc.). =0A= Many thanks again=2C Giuseppe Date: Tue=2C 25 Mar 2014 04:05:33 -0400 From: didi(a)redhat.com To: giuseppe.ragusa(a)hotmail.com =0A= CC: users(a)ovirt.org Subject: Re: [Users] Otopi pre-seeded answers and firewall settings =0A= From: "Giuseppe Ragusa" <giuseppe.ragusa(a)hotmail.com> =0A= To: "Yedidyah Bar David" <didi(a)redhat.com> Cc: "Users(a)ovirt.org" <users(a)ovirt.org> =0A= Sent: Tuesday=2C March 25=2C 2014 1:53:20 AM Subject: RE: [Users] Otopi pre-seeded answers and firewall settings Hi Didi=2C I found the references to NETWORK/iptablesEnable in my engine logs (/var/lo= g/ovirt-engine/host-deploy/ovirt-*.log)=2C but it didn't seem to work after= all. =0A= Full logs attached. I resurrected my Engine by rebooting the (still only) host=2C then restarti= ng ovirt-ha-agent (at startup the agent failed while trying to launch vdsm= =2C but I found vdsm running and so tried manually...).=0A= OK=2C so it's host-deploy that's doing that.But it's not host-deploy itself= - it's the engine that is talking to it=2C asking it to configure iptables= .I don't know how to make the agent don't do that. I searched a bit the sou= rces (which I don't know)=0A= and didn't find a simple way. You can=2C however=2C try to override this by:# mkdir -p /etc/ovirt-host-de= ploy.conf.d# echo '[environment:enforce]' > /etc/ovirt-host-deploy.conf.d/9= 9-prevent-iptables.conf=0A= # echo 'NETWORK/iptablesEnable=3Dbool:False' >> /etc/ovirt-host-deploy.conf= .d/99-prevent-iptables.conf Never tried that=2C and not sure it's recommended - if it does work=2C it m= eans that host-deploy will not=0A= update iptables=2C but the engine will think it did. So it's better to find= a way to make the engine not dothat. Or=2C better yet=2C that you'll expla= in why you need this and somehow make the engine do what you want...=0A= -- Didi =0A= _______________________________________________ =0A= Users mailing list =0A= Users(a)ovirt.org =0A= http://lists.ovirt.org/mailman/listinfo/users =0A= = --_64b96cf8-fdd4-4df4-bf3e-459817379ccc_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'>Hi Joshua=2C<br>many thanks for = your suggestion which I suppose would work perfectly=2C but I actually want= iptables (CentOS 6.5 here=2C so no firewalld) rules in place all the time= =2C but only "MY OWN" iptables rules =3B&gt=3B<br><br>Regards=2C<br>Giusepp= e<br><br><div><hr id=3D"stopSpelling">Date: Tue=2C 25 Mar 2014 18:04:04 -04= 00<br>Subject: Re: [Users] Otopi pre-seeded answers and firewall settings<b= r>From: josh(a)wrale.com<br>To: giuseppe.ragusa(a)hotmail.com<br><br><div dir= =3D"ltr"><div>Perhaps you could add the iptables and firewalld packages to = yum.conf as excludes.&nbsp=3B I don't know if this would fail silently=2C b= ut if so=2C the engine installer would never know.<br><br></div>Thanks=2C<b= r>=0A= Joshua<br></div><div class=3D"ecxgmail_extra"><br><br><div class=3D"ecxgmai= l_quote">On Tue=2C Mar 25=2C 2014 at 5:49 PM=2C Giuseppe Ragusa <span dir= =3D"ltr">&lt=3B<a href=3D"mailto:giuseppe.ragusa@hotmail.com" target=3D"_bl= ank">giuseppe.ragusa(a)hotmail.com</a>&gt=3B</span> wrote:<br>=0A= <blockquote class=3D"ecxgmail_quote" style=3D"border-left:1px #ccc solid=3B= padding-left:1ex=3B">=0A= =0A= =0A= <div><div dir=3D"ltr">Hi Didi=2C<br>many thanks for your invaluable help!<b= r><br>I'll try your suggestion (/etc/ovirt-host-deploy.conf.d/99-prevent-ip= tables.conf) asap and then I will report back.<br><br>By the way: I have a = really custom iptables setup (multiple separated networks on hypervisor hos= ts)=2C so I suppose it's best to hand tune firewall rules and then leave th= em alone (I pre-configure them=2C so the setup procedure won't be impeded i= n its communication needs anyway AND I will always guarantee the most strin= gent filtering possible with default deny ecc.).<br>=0A= <br>Many thanks again=2C<br>Giuseppe<br><br><div><hr>Date: Tue=2C 25 Mar 20= 14 04:05:33 -0400<br>From: <a href=3D"mailto:didi@redhat.com" target=3D"_bl= ank">didi(a)redhat.com</a><br>To: <a href=3D"mailto:giuseppe.ragusa@hotmail.c= om" target=3D"_blank">giuseppe.ragusa(a)hotmail.com</a><br>=0A= CC: <a href=3D"mailto:users@ovirt.org" target=3D"_blank">users(a)ovirt.org</a= ><br>Subject: Re: [Users] Otopi pre-seeded answers and firewall settings<br= ><br><div style=3D"font-size:12pt=3Bfont-family:times new roman=2Cnew york= =2Ctimes=2Cserif=3B">=0A= <div></div><blockquote style=3D"padding-left:5px=3Bfont-size:12pt=3Bfont-st= yle:normal=3Bfont-family:Helvetica=2CArial=2Csans-serif=3Btext-decoration:n= one=3Bfont-weight:normal=3Bborder-left:2px solid #1010ff=3B"><b>From: </b>"= Giuseppe Ragusa" &lt=3B<a href=3D"mailto:giuseppe.ragusa@hotmail.com" targe= t=3D"_blank">giuseppe.ragusa(a)hotmail.com</a>&gt=3B<br>=0A= <b>To: </b>"Yedidyah Bar David" &lt=3B<a href=3D"mailto:didi@redhat.com" ta= rget=3D"_blank">didi(a)redhat.com</a>&gt=3B<br><b>Cc: </b>"<a href=3D"mailto:= Users(a)ovirt.org" target=3D"_blank">Users(a)ovirt.org</a>" &lt=3B<a href=3D"ma= ilto:users@ovirt.org" target=3D"_blank">users(a)ovirt.org</a>&gt=3B<br>=0A= <b>Sent: </b>Tuesday=2C March 25=2C 2014 1:53:20 AM<br><b>Subject: </b>RE: = [Users] Otopi pre-seeded answers and firewall settings<br><div><br></div><d= iv dir=3D"ltr">Hi Didi=2C<br>I found the references to NETWORK/iptablesEnab= le in my engine logs (/var/log/ovirt-engine/host-deploy/ovirt-*.log)=2C but= it didn't seem to work after all.<br>=0A= <div><br></div>Full logs attached.<br><div><br></div>I resurrected my Engin= e by rebooting the (still only) host=2C then restarting ovirt-ha-agent (at = startup the agent failed while trying to launch vdsm=2C but I found vdsm ru= nning and so tried manually...).</div>=0A= </blockquote><div><br></div><div>OK=2C so it's host-deploy that's doing tha= t.</div><div>But it's not host-deploy itself - it's the engine that is talk= ing to it=2C asking it to configure iptables.</div><div>I don't know how to= make the agent don't do that. I searched a bit the sources (which I don't = know)</div>=0A= <div>and didn't find a simple way.</div><div><br></div><div>You can=2C howe= ver=2C try to override this by:</div><div># mkdir -p /etc/ovirt-host-deploy= .conf.d</div><div># echo '[environment:enforce]' &gt=3B&nbsp=3B/etc/ovirt-h= ost-deploy.conf.d/99-prevent-iptables.conf</div>=0A= <div># echo 'NETWORK/iptablesEnable=3Dbool:False' &gt=3B&gt=3B&nbsp=3B/etc/= ovirt-host-deploy.conf.d/99-prevent-iptables.conf</div><div><br></div><div>= Never tried that=2C and not sure it's recommended - if it does work=2C it m= eans that host-deploy will not</div>=0A= <div>update iptables=2C but the engine will think it did. So it's better to= find a way to make the engine not do</div><div>that. Or=2C better yet=2C t= hat you'll explain why you need this and somehow make the engine do what yo= u want...</div>=0A= <span class=3D"ecxHOEnZb"><font color=3D"#888888"><div><span style=3D"font-= size:12pt=3B">--&nbsp=3B</span></div><div>Didi</div><div><br></div></font><= /span></div></div> </div></div>=0A= <br>_______________________________________________<br>=0A= Users mailing list<br>=0A= <a href=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a><br>=0A= <a href=3D"http://lists.ovirt.org/mailman/listinfo/users" target=3D"_blank"= >http://lists.ovirt.org/mailman/listinfo/users</a><br>=0A= <br></blockquote></div><br></div></div> </div></body> </html>= --_64b96cf8-fdd4-4df4-bf3e-459817379ccc_--

2 1

[Users] hosted engine help
by Jason Brooks 25 Mar '14

25 Mar '14

Hey everyone, I've been testing out oVirt 3.4 w/ hosted engine, and while I've managed to bring the engine up, I've only been able to do it manually, using "hosted-engine --vm-start". The ovirt-ha-agent service fails reliably for me, erroring out with "RequestError: Request failed: success." I've pasted error passages from the ha agent and vdsm logs below. Any pointers? Regards, Jason *** ovirt-ha-agent.log MainThread::CRITICAL::2014-03-06 18:48:30,622::agent::103::ovirt_hosted_engine_ha.agent.agent.Agent::(run) Could not start ha-agent Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 97, in run self._run_agent() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 154, in _run_agent hosted_engine.HostedEngine(self.shutdown_requested).start_monitoring() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 303, in start_monitoring for old_state, state, delay in self.fsm: File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/fsm/machine.py", line 125, in next new_data = self.refresh(self._state.data) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/state_machine.py", line 77, in refresh stats.update(self.hosted_engine.collect_stats()) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 623, in collect_stats constants.SERVICE_TYPE) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 171, in get_stats_from_storage result = self._checked_communicate(request) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 198, in _checked_communicate raise RequestError("Request failed: {0}".format(msg)) RequestError: Request failed: success vdsm.log Thread-29::ERROR::2014-03-06 18:48:11,101::API::1607::vds::(_getHaInfo) failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1598, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 86, in get_all_stats constants.SERVICE_TYPE) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 171, in get_stats_from_storage result = self._checked_communicate(request) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 198, in _checked_communicate raise RequestError("Request failed: {0}".format(msg)) RequestError: Request failed: success

8 15

[Users] run once via ovirt-shell 3.3?
by Sven Kieske 25 Mar '14

25 Mar '14

Hi, I'm just trying to figure out how to use run-once via shell.. [oVirt shell (connected)]# action vm vm_name start --run-once does not work, and there is no help for "action vm start".. Does anybody have an idea on how to use run once via shell and how to pass cloud-init data over it? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 5

[Users] Vds broker
by Koen Vanoppen 25 Mar '14

25 Mar '14

Hi Guys, I already send a issue with the vds for a specific host, but now my engine.log is spitting even more errors... Any Ideas whats happening?

2 3

Re: [Users] [Pulp-list] unable to remove rpm
by Koen Vanoppen 25 Mar '14

25 Mar '14

damnit yes :-). Sorry!!! :-) 2014-03-25 12:13 GMT+01:00 Yedidyah Bar David <didi(a)redhat.com>: > Wrong list ? :-) > -- > Didi > > ------------------------------ > > *From: *"Koen Vanoppen" <vanoppen.koen(a)gmail.com> > *To: *"Alex Leonhardt" <alex.tuxx(a)gmail.com>, users(a)ovirt.org > *Sent: *Tuesday, March 25, 2014 1:08:10 PM > *Subject: *Re: [Users] [Pulp-list] unable to remove rpm > > > > You have this error after you have removed the rpm? If it is possible for > you, could you lpease try to restart your server? And check again. > > Kind regrads > > > 2014-03-25 11:29 GMT+01:00 Alex Leonhardt <alex.tuxx(a)gmail.com>: > >> Aha, seems to be gone now - or at least it's no longer on the webpage, >> but when I run publish on that repo again - I get this now: >> >> >> +----------------------------------------------------------------------+ >> Publishing Repository [#reponame#] >> +----------------------------------------------------------------------+ >> >> This command may be exited by pressing ctrl+c without affecting the actual >> operation on the server. >> >> Publishing packages... >> [==================================================] 100% >> Packages: 5/5 items >> Individual errors encountered during publishing: >> >> An unexpected error has occurred. More information can be found in the >> client >> log file ~/.pulp/admin.log. >> >> >> admin.log: >> TypeError: list indices must be integers, not str >> 2014-03-25 10:22:32,280 - ERROR - Client-side exception occurred >> Traceback (most recent call last): >> File "/usr/lib/python2.6/site-packages/pulp/client/extensions/core.py", >> line 478, in run >> exit_code = Cli.run(self, args) >> File "/usr/lib/python2.6/site-packages/okaara/cli.py", line 966, in run >> exit_code = command_or_section.execute(self.prompt, remaining_args) >> File >> "/usr/lib/python2.6/site-packages/pulp/client/extensions/extensions.py", >> line 224, in execute >> return self.method(*arg_list, **clean_kwargs) >> File >> "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/sync_publish.py", >> line 221, in run >> status.display_task_status(self.context, self.renderer, task_id) >> File >> "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", >> line 41, in display_task_status >> _display_status(context, renderer, task_list) >> File >> "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", >> line 95, in _display_status >> _display_task_status(context, renderer, task.task_id, >> quiet_waiting=quiet_waiting) >> File >> "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", >> line 122, in _display_task_status >> renderer.display_report(response.response_body.progress) >> File >> "/usr/lib/python2.6/site-packages/pulp_rpm/extension/admin/status.py", line >> 74, in display_report >> self.render_packages_step(progress_report) >> File >> "/usr/lib/python2.6/site-packages/pulp_rpm/extension/admin/status.py", line >> 282, in render_packages_step >> render_itemized_in_progress_state(self.prompt, data, _('packages'), >> self.packages_bar, state) >> File >> "/usr/lib/python2.6/site-packages/pulp_rpm/common/status_utils.py", line >> 119, in render_itemized_in_progress_state >> error_msg = error['error'] >> >> >> I also did another >> >> $ pulp-admin orphan remove --all >> Request accepted >> >> and tried to publish again, with the same result/s. >> >> >> >> Alex >> >> >> >> >> >> >> On 25 March 2014 10:09, Koen Vanoppen <vanoppen.koen(a)gmail.com> wrote: >> >>> What happens when you remove the file from /var/lib/pulp/content/rpm/ ? >>> >>> Just an idea... >>> >>> Kind regards, >>> >>> Koen >>> >>> >>> 2014-03-25 10:47 GMT+01:00 Alex Leonhardt <alex.tuxx(a)gmail.com>: >>> >>>> hi, >>>> >>>> for some odd reason i've stopped being able to remove a RPM from one of >>>> our repositories - the actions / checks seem to be returning OK although >>>> the RPM is not being removed. >>>> >>>> STR: >>>> >>>> login to pulp with >>>> $ pulp-admin login -u admin -p therealpassword >>>> >>>> remove the rpm with >>>> $ pulp-admin rpm repo remove rpm --repo-id #reponame# --match >>>> filename=#fullfilename# >>>> Output: >>>> Progress on this task can be viewed using the commands under "repo >>>> tasks". >>>> >>>> check progress with >>>> $ pulp-admin repo tasks list --repo-id #reponame# >>>> Output: >>>> +----------------------------------------------------------------------+ >>>> Tasks >>>> +----------------------------------------------------------------------+ >>>> >>>> Operations: unassociate >>>> Resources: #reponame# (repository) >>>> State: Successful >>>> Start Time: 2014-03-25T09:42:19Z >>>> Finish Time: 2014-03-25T09:42:19Z >>>> Result: N/A >>>> Task Id: 4c8f6ea7-eedd-46fe-bf58-6bc0824ed3fc >>>> >>>> check if rpm is now orphaned: >>>> $ pulp-admin orphan list --details >>>> +----------------------------------------------------------------------+ >>>> Summary >>>> +----------------------------------------------------------------------+ >>>> >>>> Total: 0 >>>> >>>> ok, so lets try and re-publish the repo and check again >>>> >>>> $ pulp-admin rpm repo publish run --repo-id=#reponame# >>>> +----------------------------------------------------------------------+ >>>> Publishing Repository [#reponame#] >>>> +----------------------------------------------------------------------+ >>>> >>>> This command may be exited by pressing ctrl+c without affecting the >>>> actual >>>> operation on the server. >>>> >>>> Publishing packages... >>>> [==================================================] 100% >>>> Packages: 5/5 items >>>> ... completed >>>> >>>> Publishing distributions... >>>> [==================================================] 100% >>>> Distributions: 0/0 items >>>> ... completed >>>> >>>> Generating metadata >>>> [-] >>>> ... completed >>>> >>>> Publishing repository over HTTPS >>>> [-] >>>> ... completed >>>> >>>> Publishing repository over HTTP >>>> [-] >>>> ... completed >>>> >>>> >>>> so the 5/5 items tells me (as there are 5 rpms including the one i want >>>> to remove in the repo), it didnt work, still >>>> >>>> so let's check if it was orphaned now >>>> >>>> $ pulp-admin orphan list --details >>>> +----------------------------------------------------------------------+ >>>> Summary >>>> +----------------------------------------------------------------------+ >>>> >>>> Total: 0 >>>> >>>> So, still not able to remove the RPM ! >>>> >>>> What am I doing wrong ? What do you need ? Pulp logs ?? >>>> >>>> Alex >>>> >>>> >>>> >>>> _______________________________________________ >>>> Pulp-list mailing list >>>> Pulp-list(a)redhat.com >>>> https://www.redhat.com/mailman/listinfo/pulp-list >>>> >>> >>> >> >> >> -- >> | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co | >> www.vsearchcloud.com | >> > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > >

1 0

Re: [Users] [Pulp-list] unable to remove rpm
by Koen Vanoppen 25 Mar '14

25 Mar '14

You have this error after you have removed the rpm? If it is possible for you, could you lpease try to restart your server? And check again. Kind regrads 2014-03-25 11:29 GMT+01:00 Alex Leonhardt <alex.tuxx(a)gmail.com>: > Aha, seems to be gone now - or at least it's no longer on the webpage, but > when I run publish on that repo again - I get this now: > > > +----------------------------------------------------------------------+ > Publishing Repository [#reponame#] > +----------------------------------------------------------------------+ > > This command may be exited by pressing ctrl+c without affecting the actual > operation on the server. > > Publishing packages... > [==================================================] 100% > Packages: 5/5 items > Individual errors encountered during publishing: > > An unexpected error has occurred. More information can be found in the > client > log file ~/.pulp/admin.log. > > > admin.log: > TypeError: list indices must be integers, not str > 2014-03-25 10:22:32,280 - ERROR - Client-side exception occurred > Traceback (most recent call last): > File "/usr/lib/python2.6/site-packages/pulp/client/extensions/core.py", > line 478, in run > exit_code = Cli.run(self, args) > File "/usr/lib/python2.6/site-packages/okaara/cli.py", line 966, in run > exit_code = command_or_section.execute(self.prompt, remaining_args) > File > "/usr/lib/python2.6/site-packages/pulp/client/extensions/extensions.py", > line 224, in execute > return self.method(*arg_list, **clean_kwargs) > File > "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/sync_publish.py", > line 221, in run > status.display_task_status(self.context, self.renderer, task_id) > File > "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", > line 41, in display_task_status > _display_status(context, renderer, task_list) > File > "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", > line 95, in _display_status > _display_task_status(context, renderer, task.task_id, > quiet_waiting=quiet_waiting) > File > "/usr/lib/python2.6/site-packages/pulp/client/commands/repo/status/status.py", > line 122, in _display_task_status > renderer.display_report(response.response_body.progress) > File > "/usr/lib/python2.6/site-packages/pulp_rpm/extension/admin/status.py", line > 74, in display_report > self.render_packages_step(progress_report) > File > "/usr/lib/python2.6/site-packages/pulp_rpm/extension/admin/status.py", line > 282, in render_packages_step > render_itemized_in_progress_state(self.prompt, data, _('packages'), > self.packages_bar, state) > File "/usr/lib/python2.6/site-packages/pulp_rpm/common/status_utils.py", > line 119, in render_itemized_in_progress_state > error_msg = error['error'] > > > I also did another > > $ pulp-admin orphan remove --all > Request accepted > > and tried to publish again, with the same result/s. > > > > Alex > > > > > > > On 25 March 2014 10:09, Koen Vanoppen <vanoppen.koen(a)gmail.com> wrote: > >> What happens when you remove the file from /var/lib/pulp/content/rpm/ ? >> >> Just an idea... >> >> Kind regards, >> >> Koen >> >> >> 2014-03-25 10:47 GMT+01:00 Alex Leonhardt <alex.tuxx(a)gmail.com>: >> >>> hi, >>> >>> for some odd reason i've stopped being able to remove a RPM from one of >>> our repositories - the actions / checks seem to be returning OK although >>> the RPM is not being removed. >>> >>> STR: >>> >>> login to pulp with >>> $ pulp-admin login -u admin -p therealpassword >>> >>> remove the rpm with >>> $ pulp-admin rpm repo remove rpm --repo-id #reponame# --match >>> filename=#fullfilename# >>> Output: >>> Progress on this task can be viewed using the commands under "repo >>> tasks". >>> >>> check progress with >>> $ pulp-admin repo tasks list --repo-id #reponame# >>> Output: >>> +----------------------------------------------------------------------+ >>> Tasks >>> +----------------------------------------------------------------------+ >>> >>> Operations: unassociate >>> Resources: #reponame# (repository) >>> State: Successful >>> Start Time: 2014-03-25T09:42:19Z >>> Finish Time: 2014-03-25T09:42:19Z >>> Result: N/A >>> Task Id: 4c8f6ea7-eedd-46fe-bf58-6bc0824ed3fc >>> >>> check if rpm is now orphaned: >>> $ pulp-admin orphan list --details >>> +----------------------------------------------------------------------+ >>> Summary >>> +----------------------------------------------------------------------+ >>> >>> Total: 0 >>> >>> ok, so lets try and re-publish the repo and check again >>> >>> $ pulp-admin rpm repo publish run --repo-id=#reponame# >>> +----------------------------------------------------------------------+ >>> Publishing Repository [#reponame#] >>> +----------------------------------------------------------------------+ >>> >>> This command may be exited by pressing ctrl+c without affecting the >>> actual >>> operation on the server. >>> >>> Publishing packages... >>> [==================================================] 100% >>> Packages: 5/5 items >>> ... completed >>> >>> Publishing distributions... >>> [==================================================] 100% >>> Distributions: 0/0 items >>> ... completed >>> >>> Generating metadata >>> [-] >>> ... completed >>> >>> Publishing repository over HTTPS >>> [-] >>> ... completed >>> >>> Publishing repository over HTTP >>> [-] >>> ... completed >>> >>> >>> so the 5/5 items tells me (as there are 5 rpms including the one i want >>> to remove in the repo), it didnt work, still >>> >>> so let's check if it was orphaned now >>> >>> $ pulp-admin orphan list --details >>> +----------------------------------------------------------------------+ >>> Summary >>> +----------------------------------------------------------------------+ >>> >>> Total: 0 >>> >>> So, still not able to remove the RPM ! >>> >>> What am I doing wrong ? What do you need ? Pulp logs ?? >>> >>> Alex >>> >>> >>> >>> _______________________________________________ >>> Pulp-list mailing list >>> Pulp-list(a)redhat.com >>> https://www.redhat.com/mailman/listinfo/pulp-list >>> >> >> > > > -- > | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co | > www.vsearchcloud.com | >

1 0

[Users] 3.4 GA
by Maurice James 25 Mar '14

25 Mar '14

------=_NextPart_000_0098_01CF4799.E1CE0F20 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Did 3.4 GA get released yet? ------=_NextPart_000_0098_01CF4799.E1CE0F20 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p = class=3DMsoNormal>Did 3.4 GA get released = yet?<o:p></o:p></p></div></body></html> ------=_NextPart_000_0098_01CF4799.E1CE0F20--

2 2

[Users] Correct way to change graphics adapter?
by mad 24 Mar '14

24 Mar '14

Hi, What is the proper way to change the graphics adapter of a VM? I know that oVirt uses qemu and I know qemu configuration, but where in oVirt do I change it? I found VDSM-Hooks/qemucmdline, but that can't be the correct way? Can I change the qemu xml somewhere? TIA mad

3 2

[Users] centralized Logging engine and hypervisor
by Sven Kieske 24 Mar '14

24 Mar '14

Hi, I got a question regarding centralized logging: I guess in order to make the engine log to /dev/log I have to manipulate /etc/ovirt-engine/engine-config/log4j.xml ? I think these tutorials might fit somehow? https://blog.trifork.com/2010/01/14/logging-to-the-syslog-from-a-java-appli… http://help.papertrailapp.com/discussions/questions/86-how-to-make-jboss-lo… for vdsm I'll just have to change: /etc/vdsm/svdsm.logger.conf and /etc/vdsm/logger.conf to: handlers=syslog Am I on the right track for the engine-log? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

9 19

[Users] php on jboss
by aditya mamidwar 24 Mar '14

24 Mar '14

i need a php file to execute some bash scripts on the server, but when i integrate the ui-plugin ot the ovirt portal, it does not find path to my .php file. I have the HTML where as .PHP residing in the same location, can someone guide on uploading PHP files on JBOSS server, since ovirt runs on it.. if i want to run a PHP file, where should i save it? -- -Aditya Mamidwar

5 6