- Users - oVirt List Archives

engine failure
by eevans＠digitaldatatechs.com 28 Jun '20

28 Jun '20

The last update for 4.3 has caused my engine server to fail. I cannot find the original repos for the 4.3 install that work with out missing dependencies. I am using Centos 7 that is up to date. Can someone forward the URL for 4.3.10.1 repo installs or info so I can reinstall and hopefully restore my stand alone engine? My vm's are still running but I cannot manage anything . Please help and it is appreciated.

3 3

Does a slow Web proxy (can't run the update-check) ruin HA scores? (Solved, ...but really?)
by thomas＠hoberg.net 27 Jun '20

27 Jun '20

Running a couple of oVirt clusters on left-over hardware in an R&D niche of the data center. Lots of switches/proxies still at 100Mbit and just checking for updates via 'yum update' can take awhile, even time out 2 times of out 3. The network between the nodes is 10Gbit though, faster than any other part of the hardware, including some SSDs and RAIDs: Cluster communication should be excellent, even if everything goes through a single port. After moving some servers to a new IP range, where there are even more hops to the proxy, I am shocked to see the three HCI nodes in one cluster almost permanently report bad HA scores, which of course becomes a real issue, when it hits all three. The entire cluster really starts to 'wobble'.... Trying to find the reason for that bad score and there is nothing obvious: Machines have been running just fine, very light loads, no downtimes, reboots etc. But looking at the events recorded on hosts, something like "Failed to check for available updates on host <name> with message 'Failed to run check-update of host '<host>'. Error: null'." does come up pretty often. Moreover, when I then have all three servers run the update check on the GUI, I can find myself locked-out of the oVirt GUI and once I get back in, all non-active HostedEngine hosts are suddenly back in the 'low HS score' state. So I have this inkling impression, that the ability (or not) to run the update check is counting into the HA score, which ... IMHO would be quite mad. It would have production clusters go haywire, just because an external internet connection is interrupted... Any feedback on this? P.S. Only minutes later, after noticing the ha-scores reported by hosted-engine --vm-status were really in the low 2000s range overall, I did a quick Google and found this: ovirt-ha-agent - host score penaltieshttps://github.com/oVirt/ovirt-hosted-engine-ha/blob/master/ovirt_… NOTE: These values must be the same for all hosts in the HA cluster!base-score=3400 gateway-score-penalty=1600 not-uptodate-config-penalty=1000 //not 'knowing if there are updates' is not the same as 'knowing it missing critical patches' mgmt-bridge-score-penalty=600 free-memory-score-penalty=400 cpu-load-score-penalty=1000 engine-retry-score-penalty=50 cpu-load-penalty-min=0.4 cpu-load-penalty-max=0.9 So now I know how to fix it for me, but I'd consider this pretty much a bug: When the update check fails, that implies really only that the update check could not go through. It doesn't mean the cluster is fundamentally unhealthy. Now I understand how that negative feedback is next to impossible inside RedHat's network, where update servers are local. But having a cluster HA score being based on something 'just now happening' on the other far edges of the Internet... seems a very bad design decision. Please comment and/or tell me how and where I should file this as a bug.

2 2

NFS import storage domain permissions error
by Joop 27 Jun '20

27 Jun '20

Hi All, I've got an error when I try to import a storage domain from a Synology NAS that used to be a 4.3.10 oVirt installation but no matter what I try I can't get it to import. I keep getting a permission denied error while with the same settings it worked for the previous version oVirt. This is the log: 2020-06-27 19:39:38,113+0200 INFO (jsonrpc/0) [vdsm.api] START connectStorageServer(domType=1, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '********', 'protocol_version': 'auto', 'port': '', 'iqn': '', 'conn ection': 'pakhuis:/volume1/nfs/data', 'ipv6_enabled': 'false', 'id': '00000000-0000-0000-0000-000000000000', 'user': '', 'tpgt': '1'}], options=None) from=::ffff:192.168.11.14,53948, flow_id=c753ebc5-20a3-4e1c-bcd8-794ddde3ec69, task _id=2a9ef4e7-e2c0-43d6-b03a-7f0d62f08e50 (api:48) 2020-06-27 19:39:38,113+0200 DEBUG (jsonrpc/0) [storage.Server.NFS] Using local locks for NFSv3 locks (storageServer:442) 2020-06-27 19:39:38,114+0200 INFO (jsonrpc/0) [storage.StorageServer.MountConnection] Creating directory '/rhev/data-center/mnt/pakhuis:_volume1_nfs_data' (storageServer:167) 2020-06-27 19:39:38,114+0200 INFO (jsonrpc/0) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/pakhuis:_volume1_nfs_data mode: None (fileUtils:198) 2020-06-27 19:39:38,114+0200 INFO (jsonrpc/0) [storage.Mount] mounting pakhuis:/volume1/nfs/data at /rhev/data-center/mnt/pakhuis:_volume1_nfs_data (mount:207) 2020-06-27 19:39:38,360+0200 DEBUG (jsonrpc/0) [storage.Mount] /rhev/data-center/mnt/pakhuis:_volume1_nfs_data mounted: 0.25 seconds (utils:390) 2020-06-27 19:39:38,380+0200 DEBUG (jsonrpc/0) [storage.Mount] Waiting for udev mount events: 0.02 seconds (utils:390) 2020-06-27 19:39:38,381+0200 DEBUG (jsonrpc/0) [storage.oop] Creating ioprocess Global (outOfProcess:89) 2020-06-27 19:39:38,382+0200 INFO (jsonrpc/0) [IOProcessClient] (Global) Starting client (__init__:308) 2020-06-27 19:39:38,394+0200 INFO (ioprocess/10476) [IOProcess] (Global) Starting ioprocess (__init__:434) 2020-06-27 19:39:38,394+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) Closing unrelated FDs... (__init__:432) 2020-06-27 19:39:38,394+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) Opening communication channels... (__init__:432) 2020-06-27 19:39:38,394+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) Queuing request (slotsLeft=20) (__init__:432) 2020-06-27 19:39:38,394+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) (1) Start request for method 'access' (waitTime=49) (__init__:432) 2020-06-27 19:39:38,395+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) (1) Finished request for method 'access' (runTime=421) (__init__:432) 2020-06-27 19:39:38,395+0200 DEBUG (ioprocess/10476) [IOProcess] (Global) (1) Dequeuing request (slotsLeft=21) (__init__:432) 2020-06-27 19:39:38,396+0200 WARN (jsonrpc/0) [storage.oop] Permission denied for directory: /rhev/data-center/mnt/pakhuis:_volume1_nfs_data with permissions:7 (outOfProcess:193) 2020-06-27 19:39:38,396+0200 INFO (jsonrpc/0) [storage.Mount] unmounting /rhev/data-center/mnt/pakhuis:_volume1_nfs_data (mount:215) 2020-06-27 19:39:38,435+0200 DEBUG (jsonrpc/0) [storage.Mount] /rhev/data-center/mnt/pakhuis:_volume1_nfs_data unmounted: 0.04 seconds (utils:390) 2020-06-27 19:39:38,453+0200 DEBUG (jsonrpc/0) [storage.Mount] Waiting for udev mount events: 0.02 seconds (utils:390) 2020-06-27 19:39:38,453+0200 ERROR (jsonrpc/0) [storage.HSM] Could not connect to storageServer (hsm:2421) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/fileSD.py", line 80, in validateDirAccess getProcPool().fileUtils.validateAccess(dirPath) File "/usr/lib/python3.6/site-packages/vdsm/storage/outOfProcess.py", line 194, in validateAccess raise OSError(errno.EACCES, os.strerror(errno.EACCES)) PermissionError: [Errno 13] Permission denied During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2418, in connectStorageServer conObj.connect() File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 449, in connect return self._mountCon.connect() File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 190, in connect six.reraise(t, v, tb) File "/usr/lib/python3.6/site-packages/six.py", line 693, in reraise raise value File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 183, in connect self.getMountObj().getRecord().fs_file) File "/usr/lib/python3.6/site-packages/vdsm/storage/fileSD.py", line 91, in validateDirAccess raise se.StorageServerAccessPermissionError(dirPath) vdsm.storage.exception.StorageServerAccessPermissionError: Permission settings on the specified path do not allow access to the storage. Verify permission settings on the specified storage path.: 'path = /rhev/data-center/mnt/pakhuis :_volume1_nfs_data' 2020-06-27 19:39:38,453+0200 DEBUG (jsonrpc/0) [storage.HSM] knownSDs: {a2691633-e3c9-454e-9ee4-a6f50f4e00fa: vdsm.storage.glusterSD.findDomain} (hsm:2470) 202 If I make a mistake in the path I get the mount command in the logs and correcting for the mistake let me mount it at /mnt and then I'm able to create files and folders using the vdsm and qemu accounts so I don't know where that error is coming from. Had a look at the source of vdsm/storage/* but I'm not a python programmer. A couple of other 4.4 oVirt installs don't have this problem and I used the same usb stick with Centos-8.2 for those as for this one. Followed the same install instructions, same versions of packages as far as I can see. Beats me I'm tempted to reinstall Centos7 and oVirt4.3.10 just to see what happens, but I'm hoping someone can point me to something that I must have overlooked. Regards, Joop

1 1

Re: ETL service aggregation error
by Ayansh Rocks 27 Jun '20

27 Jun '20

Thanks Paul. On Sat, Jun 27, 2020, 1:19 PM Staniforth, Paul < P.Staniforth(a)leedsbeckett.ac.uk> wrote: > Hi Ayansh, > as it's only changing the history database there isn't > a high risk and you can run it while your system is being used, > For piece of mind you can do a full backup before, or just backup the Data > Warehouse. > > > https://www.ovirt.org/documentation/administration_guide/#chap-Backups_and_… > > Regards, > Paul S. > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 27 June 2020 06:42 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> > *Cc:* users <users(a)ovirt.org>; devel(a)ovirt.org <devel(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Hi Paul, > > Thanks, is it safe to run this update command. I am getting this issue on > my production environment. > > On Sat, Jun 27, 2020, 12:51 AM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Ayansh, > It looks like the lastHourAgg is wrong is should > be 2 hours before the runTime but is 1:30 hours before runtime. > > Try > > systemctl stop ovirt-engine-dwhd > > in ovirt_engine_history database > > UPDATE history_configuration set var_datetime = var_datetime - interval '24 hour' WHERE var_name = 'lastHourAggr'; > > UPDATE history_configuration set var_datetime = var_datetime - interval '1 day' WHERE var_name = 'lastDayAggr'; > > systemctl stop ovirt-engine-dwhd > > > see https://www.mail-archive.com/users@ovirt.org/msg53055.html > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.mail-…> > > > Regards, > > Paul Staniforth > > School of Built Environment Engineering and Computing. > > Leeds Beckett University > > Networked Systems Analyst, Research and Engineering Support. > Technical Lead Architect IMS and oVirt Virtualization > > tel: +44 (0)113 28123754 > email: p.staniforth(a)leedsbeckett.ac.uk > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gofun…> > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 26 June 2020 17:10 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org>; devel(a)ovirt.org <devel(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Can we fix this any how guys. > > On Thu, Jun 25, 2020 at 5:53 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > Is it a bug ? > > > On Thu, Jun 25, 2020 at 4:11 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > See below as well if it helps - > > [root@iondelvm149 ~]# date > Thu Jun 25 16:09:45 IST 2020 > [root@iondelvm149 ~]# psql -h localhost -U ovirt_engine_history -d > ovirt_engine_history > Password for user ovirt_engine_history: > psql (9.2.24, server 10.6) > WARNING: psql version 9.2, server version 10.0. > Some psql features might not work. > Type "help" for help. > > ovirt_engine_history=> select * from history_configuration; > var_name | var_value | var_datetime > -------------------+-----------+------------------------ > default_language | en_US | > firstSync | false | 2018-03-23 12:27:00-04 > lastHourAggr | | 2020-06-25 05:00:00-04 > HourlyAggFailed | false | > lastDayAggr | | 2020-06-24 01:00:00-04 > MinimalETLVersion | 4.3.0 | > (6 rows) > > ovirt_engine_history=> > > On Thu, Jun 25, 2020 at 4:06 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > is it on the hour? it sounds like it got a > problem aggregating the samples to create the hourly samples. > > I had to update the java memory usage as it was running out of heap memory. > > The defaults are > > DWH_HEAP_MIN=1g > DWH_HEAP_MAX=1g > > see > > /usr/share/ovirt-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf > > for settings. > > Regards, > Paul S. > > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 25 June 2020 10:40 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Hi Paul, > > Yes i am able to connect to the database from ovirt engine machine. > > port is already open. what could be issue, i am getting this error in > every hour. > > Thanks > > On Wed, Jun 24, 2020 at 6:30 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > it looks like it's had a problem for over 2 > years, is the Data Warehouse database local or remote? is there a firewall > port open? > > Can you connect to the database from the engine machine? > > The credentials should be in > /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf > > as your using 4.3 the version of postgresql is 10 and using scl > > scl enable rh-postgresql10 "psql -h localhost -U ovirt_engine_history > -d ovirt_engine_history" > > if it's using the standard user, database and is local. > > > Regards, > Paul S. > . > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 24 June 2020 12:47 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Please find the attached error logs. > > On Thu, Jun 4, 2020 at 8:17 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > I can't see any of your images and also it > would be better to have the log file as text. > > Regards, > Paul S. > > > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 04 June 2020 15:16 > *To:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Any update on this ? > > On Tue, May 26, 2020 at 1:41 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > Hi, > > I am using 4.3.7 self hosted engine. From Few days i am getting regular > below error messages :- > [image: image.png] > > Logs in /var/log/ovirt-engine-dwh/ovirt-engine-dwhd.log > [image: image.png] > > What could be the reason for this? > > Thanks > Shashank > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > >

1 0

Re: ETL service aggregation error
by Ayansh Rocks 27 Jun '20

27 Jun '20

Hi Paul, Thanks, is it safe to run this update command. I am getting this issue on my production environment. On Sat, Jun 27, 2020, 12:51 AM Staniforth, Paul < P.Staniforth(a)leedsbeckett.ac.uk> wrote: > Hello Ayansh, > It looks like the lastHourAgg is wrong is should > be 2 hours before the runTime but is 1:30 hours before runtime. > > Try > > systemctl stop ovirt-engine-dwhd > > in ovirt_engine_history database > > UPDATE history_configuration set var_datetime = var_datetime - interval '24 hour' WHERE var_name = 'lastHourAggr'; > > UPDATE history_configuration set var_datetime = var_datetime - interval '1 day' WHERE var_name = 'lastDayAggr'; > > systemctl stop ovirt-engine-dwhd > > > see https://www.mail-archive.com/users@ovirt.org/msg53055.html > > > Regards, > > Paul Staniforth > > School of Built Environment Engineering and Computing. > > Leeds Beckett University > > Networked Systems Analyst, Research and Engineering Support. > Technical Lead Architect IMS and oVirt Virtualization > > tel: +44 (0)113 28123754 > email: p.staniforth(a)leedsbeckett.ac.uk > > <https://www.gofundme.com/f/bytes-for-heroes> > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 26 June 2020 17:10 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org>; devel(a)ovirt.org <devel(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Can we fix this any how guys. > > On Thu, Jun 25, 2020 at 5:53 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > Is it a bug ? > > > On Thu, Jun 25, 2020 at 4:11 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > See below as well if it helps - > > [root@iondelvm149 ~]# date > Thu Jun 25 16:09:45 IST 2020 > [root@iondelvm149 ~]# psql -h localhost -U ovirt_engine_history -d > ovirt_engine_history > Password for user ovirt_engine_history: > psql (9.2.24, server 10.6) > WARNING: psql version 9.2, server version 10.0. > Some psql features might not work. > Type "help" for help. > > ovirt_engine_history=> select * from history_configuration; > var_name | var_value | var_datetime > -------------------+-----------+------------------------ > default_language | en_US | > firstSync | false | 2018-03-23 12:27:00-04 > lastHourAggr | | 2020-06-25 05:00:00-04 > HourlyAggFailed | false | > lastDayAggr | | 2020-06-24 01:00:00-04 > MinimalETLVersion | 4.3.0 | > (6 rows) > > ovirt_engine_history=> > > On Thu, Jun 25, 2020 at 4:06 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > is it on the hour? it sounds like it got a > problem aggregating the samples to create the hourly samples. > > I had to update the java memory usage as it was running out of heap memory. > > The defaults are > > DWH_HEAP_MIN=1g > DWH_HEAP_MAX=1g > > see > > /usr/share/ovirt-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf > > for settings. > > Regards, > Paul S. > > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 25 June 2020 10:40 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Hi Paul, > > Yes i am able to connect to the database from ovirt engine machine. > > port is already open. what could be issue, i am getting this error in > every hour. > > Thanks > > On Wed, Jun 24, 2020 at 6:30 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > it looks like it's had a problem for over 2 > years, is the Data Warehouse database local or remote? is there a firewall > port open? > > Can you connect to the database from the engine machine? > > The credentials should be in > /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf > > as your using 4.3 the version of postgresql is 10 and using scl > > scl enable rh-postgresql10 "psql -h localhost -U ovirt_engine_history > -d ovirt_engine_history" > > if it's using the standard user, database and is local. > > > Regards, > Paul S. > . > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 24 June 2020 12:47 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < > users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Please find the attached error logs. > > On Thu, Jun 4, 2020 at 8:17 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > Hello Shashank, > I can't see any of your images and also it > would be better to have the log file as text. > > Regards, > Paul S. > > > > ------------------------------ > *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> > *Sent:* 04 June 2020 15:16 > *To:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: ETL service aggregation error > > > *Caution External Mail:* Do not click any links or open any attachments > unless you trust the sender and know that the content is safe. > Any update on this ? > > On Tue, May 26, 2020 at 1:41 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> > wrote: > > Hi, > > I am using 4.3.7 self hosted engine. From Few days i am getting regular > below error messages :- > [image: image.png] > > Logs in /var/log/ovirt-engine-dwh/ovirt-engine-dwhd.log > [image: image.png] > > What could be the reason for this? > > Thanks > Shashank > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > >

2 1

How to suspend a stateless VM
by pascal＠butterflyit.com 27 Jun '20

27 Jun '20

Currently from the ovirt web interface it is not possible to suspend a stateless VM. However I have a need for it for example when I want to free idle VM (or migrate them to a different cluster) and still not lose the current status of the VM. Thanks

2 1

How to change the hosted engine configuration manually?
by Ricardo Alonso 26 Jun '20

26 Jun '20

After an update in the cluster configuration, the hosted engine ended up with an invalid configuration (bios x machine type) and it's not coming up. I need to return the bios to legacy mode, but I'm not finding a way to correct the xml generated to turn the machine back on. The storage domain is iSCSI. Any help would be appreciate. (reinstall isn't an option).

2 2

Re: ETL service aggregation error
by Ayansh Rocks 26 Jun '20

26 Jun '20

Is it a bug ? On Thu, Jun 25, 2020 at 4:11 PM Ayansh Rocks <shashank123rastogi(a)gmail.com> wrote: > See below as well if it helps - > > [root@iondelvm149 ~]# date > Thu Jun 25 16:09:45 IST 2020 > [root@iondelvm149 ~]# psql -h localhost -U ovirt_engine_history -d > ovirt_engine_history > Password for user ovirt_engine_history: > psql (9.2.24, server 10.6) > WARNING: psql version 9.2, server version 10.0. > Some psql features might not work. > Type "help" for help. > > ovirt_engine_history=> select * from history_configuration; > var_name | var_value | var_datetime > -------------------+-----------+------------------------ > default_language | en_US | > firstSync | false | 2018-03-23 12:27:00-04 > lastHourAggr | | 2020-06-25 05:00:00-04 > HourlyAggFailed | false | > lastDayAggr | | 2020-06-24 01:00:00-04 > MinimalETLVersion | 4.3.0 | > (6 rows) > > ovirt_engine_history=> > > On Thu, Jun 25, 2020 at 4:06 PM Staniforth, Paul < > P.Staniforth(a)leedsbeckett.ac.uk> wrote: > >> Hello Shashank, >> is it on the hour? it sounds like it got a >> problem aggregating the samples to create the hourly samples. >> >> I had to update the java memory usage as it was running out of heap >> memory. >> >> The defaults are >> >> DWH_HEAP_MIN=1g >> DWH_HEAP_MAX=1g >> >> see >> >> /usr/share/ovirt-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf >> >> for settings. >> >> Regards, >> Paul S. >> >> >> ------------------------------ >> *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> >> *Sent:* 25 June 2020 10:40 >> *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < >> users(a)ovirt.org> >> *Subject:* Re: [ovirt-users] Re: ETL service aggregation error >> >> >> *Caution External Mail:* Do not click any links or open any attachments >> unless you trust the sender and know that the content is safe. >> Hi Paul, >> >> Yes i am able to connect to the database from ovirt engine machine. >> >> port is already open. what could be issue, i am getting this error in >> every hour. >> >> Thanks >> >> On Wed, Jun 24, 2020 at 6:30 PM Staniforth, Paul < >> P.Staniforth(a)leedsbeckett.ac.uk> wrote: >> >> Hello Shashank, >> it looks like it's had a problem for over >> 2 years, is the Data Warehouse database local or remote? is there a >> firewall port open? >> >> Can you connect to the database from the engine machine? >> >> The credentials should be in >> /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf >> >> as your using 4.3 the version of postgresql is 10 and using scl >> >> scl enable rh-postgresql10 "psql -h localhost -U ovirt_engine_history >> -d ovirt_engine_history" >> >> if it's using the standard user, database and is local. >> >> >> Regards, >> Paul S. >> . >> >> ------------------------------ >> *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> >> *Sent:* 24 June 2020 12:47 >> *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users < >> users(a)ovirt.org> >> *Subject:* Re: [ovirt-users] Re: ETL service aggregation error >> >> >> *Caution External Mail:* Do not click any links or open any attachments >> unless you trust the sender and know that the content is safe. >> Please find the attached error logs. >> >> On Thu, Jun 4, 2020 at 8:17 PM Staniforth, Paul < >> P.Staniforth(a)leedsbeckett.ac.uk> wrote: >> >> Hello Shashank, >> I can't see any of your images and also >> it would be better to have the log file as text. >> >> Regards, >> Paul S. >> >> >> >> ------------------------------ >> *From:* Ayansh Rocks <shashank123rastogi(a)gmail.com> >> *Sent:* 04 June 2020 15:16 >> *To:* users <users(a)ovirt.org> >> *Subject:* [ovirt-users] Re: ETL service aggregation error >> >> >> *Caution External Mail:* Do not click any links or open any attachments >> unless you trust the sender and know that the content is safe. >> Any update on this ? >> >> On Tue, May 26, 2020 at 1:41 PM Ayansh Rocks < >> shashank123rastogi(a)gmail.com> wrote: >> >> Hi, >> >> I am using 4.3.7 self hosted engine. From Few days i am getting regular >> below error messages :- >> [image: image.png] >> >> Logs in /var/log/ovirt-engine-dwh/ovirt-engine-dwhd.log >> [image: image.png] >> >> What could be the reason for this? >> >> Thanks >> Shashank >> >> To view the terms under which this email is distributed, please go to:- >> http://leedsbeckett.ac.uk/disclaimer/email/ >> <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> >> >> To view the terms under which this email is distributed, please go to:- >> http://leedsbeckett.ac.uk/disclaimer/email/ >> <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fleedsbecke…> >> >> To view the terms under which this email is distributed, please go to:- >> http://leedsbeckett.ac.uk/disclaimer/email/ >> >>

2 2

ovirt-provider-ovn syncrhonisation
by chris＠chrislaw.me 26 Jun '20

26 Jun '20

Hi - during the last reboot all my ovn networks appeared in oVirt but weren't reflected on the physical host, no VMs would boot that had an OVN network attached. I was looking at my logs and I can see the following - Failed to synchronize networks of Provider ovirt-provider-ovn. Networks of Provider ovirt-provider-ovn were successfully synchronized. There was an issue with this host/engine where they lost connection which explains the Failed to Sync. The problem is it's since all been rebooted and it doesn't look like the ovirt-provider-ovn has tried to sync since, as I understand it, it should sync every 5 minutes? Is it just a case that successful syncs aren't always report in the events log? I've checked my timing properties for sync of external providers and all seems correct. So now I'm worried another reboot will result in losing all the ovn networks I've created through oVirt again! Also worth noting AutoSync is turned on for the provider.

2 1

Clean old mount points in hosts VDSM
by Vinícius Ferrão 25 Jun '20

25 Jun '20

Hello, For reasons unknown one of my hosts is trying to mount an old storage point that’s been removed some time ago. /var/log/vdsm/vdsm.log:2020-06-24 19:57:35,958-0300 INFO (tmap-65016/0) [IOProcessClient] (/192.168.10.6:_mnt_pool0_ovirt_he) Starting client (__init__:308) /var/log/vdsm/vdsm.log:2020-06-24 19:57:35,968-0300 INFO (ioprocess/12115) [IOProcess] (/192.168.10.6:_mnt_pool0_ovirt_he) Starting ioprocess (__init__:434) /var/log/vdsm/vdsm.log:2020-06-24 19:57:42,167-0300 INFO (jsonrpc/6) [vdsm.api] START connectStorageServer(domType=1, spUUID=u'00000000-0000-0000-0000-000000000000', conList=[{u'protocol_version': u'auto', u'connection': u'192.168.10.6:/mnt/pool0/ovirt/he', u'user': u'kvm', u'id': u'e29cf818-5ee5-46e1-85c1-8aeefa33e95d'}], options=None) from=::1,59090, task_id=5ea81925-ec92-4031-aa36-bb6f436321d5 (api:48) /var/log/vdsm/vdsm.log:2020-06-24 19:57:42,169-0300 INFO (jsonrpc/6) [storage.StorageServer.MountConnection] Creating directory u'/rhev/data-center/mnt/192.168.10.6:_mnt_pool0_ovirt_he' (storageServer:168) /var/log/vdsm/vdsm.log:2020-06-24 19:57:42,169-0300 INFO (jsonrpc/6) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/192.168.10.6:_mnt_pool0ovirt_he mode: None (fileUtils:199) /var/log/vdsm/vdsm.log:2020-06-24 19:57:42,169-0300 INFO (jsonrpc/6) [storage.Mount] mounting 192.168.10.6:/mnt/pool0/ovirt/he at /rhev/data-center/mnt/192.168.10.6:_mnt_pool0_ovirt_he (mount:204) /var/log/vdsm/vdsm.log:MountError: (32, ';mount.nfs: mounting 192.168.10.6:/mnt/pool0/ovirt/he failed, reason given by server: No such file or directory\n') /var/log/vdsm/vdsm.log:2020-06-24 19:57:43,683-0300 INFO (jsonrpc/5) [vdsm.api] START connectStorageServer(domType=1, spUUID=u'00000000-0000-0000-0000-000000000000', conList=[{u'protocol_version': u'auto', u'connection': u'192.168.10.6:/mnt/pool0/ovirt/he', u'user': u'kvm', u'id': u'e29cf818-5ee5-46e1-85c1-8aeefa33e95d'}], options=None) from=::1,59094, task_id=9ce61858-dea1-4059-b942-a52c8c82afdc (api:48) /var/log/vdsm/vdsm.log:2020-06-24 19:57:43,685-0300 INFO (jsonrpc/5) [storage.StorageServer.MountConnection] Creating directory u'/rhev/data-center/mnt/192.168.10.6:_mnt_pool0_ovirt_he' (storageServer:168) /var/log/vdsm/vdsm.log:2020-06-24 19:57:43,685-0300 INFO (jsonrpc/5) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/192.168.10.6:_mnt_pool0ovirt_he mode: None (fileUtils:199) /var/log/vdsm/vdsm.log:2020-06-24 19:57:43,685-0300 INFO (jsonrpc/5) [storage.Mount] mounting 192.168.10.6:/mnt/pool0/ovirt/he at /rhev/data-center/mnt/192.168.10.6:_mnt_pool0_ovirt_he (mount:204) /var/log/vdsm/vdsm.log:MountError: (32, ';mount.nfs: mounting 192.168.10.6:/mnt/pool0/ovirt/he failed, reason given by server: No such file or directory\n’) This only happens in one host and it’s spamming /var/log/vdsm/vdsm.log. Any ideia on how to debug this and remove the entry? Thanks,

2 3