- Users - oVirt List Archives

ovirt_vm ansible cloud-init ipv6 related
by Vrgotic, Marko 20 Jun '19

20 Jun '19

Dear oVirt Would you be so kind to help out clarifying if and how is IPv6 supported with -ansible / ovirt_vm / cloud-init boot protocol. I have created a VM template which by default uses cloud-init with following: [cid:image001.png@01D5251F.E55FEAA0] When I boot the VM from UI, each VM gets IPv4 DHCP and IPv6 DHCP6 address, default cloud-init setup and we have infrastructure for both IPv4 and IPv6. However, when calling same template via Ansible ovirt_vm, using following: cloud_init_nics: |~ - nic_name: eth0 |~ nic_boot_protocol: dhcp |~ nic_on_boot: true each VM receives only IPv4 DHCP and only IPv6 RA, but not DHCP IPv6. Looking at booted VM, following options are not set: * /etc/sysconfig/network => NETWORKING_IPV6=yes * Or /etc/sysconfig/network-scripts/ifcfg-eth0 => DHCPV6C=yes and IPV6INIT=yes We need IPv6 DHCP6 address , especially for registering it host with DNS AAAA record. Is this supported? Am I doing it wrong way? If its supported please let me know, how can I make sure that VMs created using Ansible also initialize DHCPV6. Please assist. Marko Vrgotic ActiveVideo

2 2

ansible tower/awx integration in ovirt
by Nathanaël Blanchet 20 Jun '19

20 Jun '19

Hello, I wrote a playbook for workflow that automates a vm creation from a template/cloud-init and then add it to our supervision engine and finally to our backup system. All currently works fine with awx. I'd like to use one UI, and I wondered if integrating awx/tower in ovirt could be a good way to complete a basic current vm creation. -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

Re: Download Ovirt Repository
by Strahil 20 Jun '19

20 Jun '19

You can also deploy a spacewalk-based system for central repository management. I am using uyuni project for local VM repo, but it should be able to sync the oVirt repos without any issues. Of course, spacewalk requires some basic knowledge but it's not a rocket science. Best Regards, Strahil NikolovOn Jun 20, 2019 09:21, jin&hitman&Barracuda <jinhitman(a)gmail.com> wrote: > > Hi > > We 've a seperate test and aducation lab and connection is very intermittent. I use reposync command to create a local copy of repositories. When sync done, "createrepo" command prepare a repodata directory. After first sync, a cron job can sync continuously daily basis. I believe this is the most easy way to having a local repo. > > If you need a complete guide for this, you may look at "Red Hat Virtualization 4.2 installation guide" page 18. > > On Thu, 20 Jun 2019, 07:41 , <siovelrm(a)gmail.com> wrote: >> >> Hi, I've been using Ovirt and I'm doing fine. It happens that where I live connectivity to the internet is very slow. I wanted to know if it was possible to download the Ovirt repository in order to have it locally on my network. Greetings and thank you in advance for your answers. >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5FFR4TQ6CLWJZ…

2 1

Windows Server 2019: Driver Signature Enforcement
by Vinícius Ferrão 19 Jun '19

19 Jun '19

Hello, I’m running oVirt 4.3.0 and installing Windows Server 2019 with UEFI Secure Boot is impossible with the bundled VirtIO drivers. Windows complains about invalid signatures on vioscsi.sys. The only way to boot the system is halting the process with F8 and them selecting: Disable Driver Signature Enforcement. So, what’s the recommended way to solve this? There’s no signed drivers? Thanks,

6 11

Does anyone have a positive experience with physical host to oVirt conversion?
by Artem Tambovskiy 19 Jun '19

19 Jun '19

Hello, Just would like to check if it really possible to convert old Centos6 based physical box into oVirt 4.3 VM? I haven't been able to find any success stories on this and process seems a bit complicated. As I understand it I need a virt-v2v conversion proxy + image with virt-p2v running on physical host which needs to be converted. I'm a bit lost how I can get the converted VM into oVirt cluster than? -- Regards, Artem

4 3

Ovirt engine setup Error
by PS Kazi 19 Jun '19

19 Jun '19

I am getting error while Ovirt Engine Setup: Ovirt Node version 4.3.4 ____________________________________________ [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 90, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:5f:0e:ea | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.086952", "end": "2019-06-14 12:05:37.249240", "rc": 0, "start": "2019-06-14 12:05:37.162288", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Please help me

3 3

ovirt-engine/api/imagetransfers - Indefinitely locked snapshot image if transfer does not start within 2 minutes
by Justin Willoughby 19 Jun '19

19 Jun '19

I've noticed an issue but I've not found any bugs related to this so it's not clear if it's a bug and just not been reported or if I'm missing something. It seems if using the ovirt-engine/api/imagetransfers call with a POST request such as say <image_transfer><snapshot id="b16290c4-6eef-469f-962d-31e9b76638e9"/><direction>download</direction></image_transfer> is done and more then two minutes pass (where the the ovirt-imageio-proxy/ovirt-imageio-daemon deletes the ticket), you can no longer download the snapshot image. I think this part is normal, HOWEVER the snapshot image remains locked indefinitely in this case. If the image starts transferring/downloading within the 2 minutes where the ovirt-imageio-proxy/ovirt-imageio-daemon ticket is valid, all is well and at the end of the transfer the snapshot image is automatically unlocked. oVirt 4.2.8.7-0.1.el7ev Anyone seen this before? What am I missing? - Justin

1 1

[ANN] oVirt 4.3.5 Second Release Candidate is now available for testing
by Sandro Bonazzola 19 Jun '19

19 Jun '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.5 Second Release Candidate for testing, as of June 19th, 2019. While testing this release candidate please consider deeper testing on gluster upgrade since with this release candidate we are switching from Gluster 5 to Gluster 6. This update is a release candidate of the fifth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.5 release highlights: http://www.ovirt.org/release/4.3.5/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.5/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>

1 0

ovirt-engine/api/imagetransfers - Indifferently Locked Snapshot Image if transfer does not start within 2 minutes
by Justin Willoughby 19 Jun '19

19 Jun '19

Not sure if this group or the dev group would be better. I've noticed an issue but I've not found any bugs related to this so it's not clear if it's a bug and just not been reported or if I'm missing something. It seems if using the ovirt-engine/api/imagetransfers call with a POST request such as say <image_transfer><snapshot id="b16290c4-6eef-469f-962d-31e9b76638e9"/><direction>download</direction></image_transfer> is done and more then two minutes pass (where the the ovirt-imageio-proxy deletes the ticket), you can no longer download the snapshot image. I think would be expected, HOWEVER the snapshot image remains locked indifferently in this case. If the image starts transferring/downloading within the 2 minutes where the ovirt-imageio-proxy ticket is valid, all is well and at the end of the transfer the snapshot image is automatically unlocked. oVirt/RHV 4.2.8.7-0.1.el7ev Anyone seen this before? What am I missing? - Justin

1 0

SSL Error adding new host
by Stefano Danzi 19 Jun '19

19 Jun '19

Hello, I have i running cluster ad I have to add a new host. Current cluster has AMD type cpu, new host has intel CPU su I added a new cluster in same datacenter (datacenter default compatibility 4.2). New Host is running node 4.3.4, engine is 4.3.4.3-1.el7 The new host is attached to ths new cluster, but engine can't connect. Engine logs tell me: 2019-06-18 13:04:21,873+02 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2019-06-18 13:04:21,878+02 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-46) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: General SSLEngine problem 4.3..4.3-1.el7

2 3