- Users - oVirt List Archives

[Users] ldap simple
by Andrej Bagon 19 Mar '13

19 Mar '13

Hi, is it possible to change the bind request that is sent to the ldap server? The default uid=user,cn=Users,cn=Accounts,cn=our,cn=domain is not suitable. Thank you.

4 7

[Users] Features requests for the setup/configuration utilities - feedback requested
by Alex Lourie 19 Mar '13

19 Mar '13

Hi All As we are working on the configuration utilities (engine-setup, engine-upgrade and engine-cleanup), we would like to get as much community involvement as possible. As such, we'd like to hear the wishes of the community in regards with those tools. I've created a wiki page [1] where we will keep the list of feature requests. We would appreciate adding features to the list of by replying to this thread directly. Please do not bugs to that list - the bugs should be resolved in due course according to their priorities and should not affect the features that we would like to implement. Thank you. [1] http://www.ovirt.org/Features/Engine-Config-Utilities -- Alex Lourie Software Engineer in RHEVM Integration Red Hat

4 10

[Users] Tip for oVirt marketing improvement - HA and features comparison
by Jiri Belka 19 Mar '13

19 Mar '13

Hi, a Czech company running vCloud has a nice webpage with little schema of hw architecture which changes if you click on a hw item making it as failed, then it shows redundant paths to continue funcionality. It also has nice feature (even old) comparison between VMWare/Hyper-V/Xen/KVM. Check 2/3 part of http://www.master.cz/cloud-hosting/ Something like this was be niiiice for oVirt. jbelka

2 1

[Users] Problem install
by Marcelo Barbosa 19 Mar '13

19 Mar '13

hi guys, I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this version not finish for sucessful install, information my enviroment: [root@firelap ovirt]# cat /etc/redhat-release Fedora release 18 (Spherical Cow) [root@firelap ovirt]# uname -a Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux [root@firelap ovirt]# ifconfig bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 136972 bytes 54834621 (52.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 136972 bytes 54834621 (52.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.255.43 netmask 255.255.255.192 broadcast 172.16.255.63 inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet) RX packets 480681 bytes 614801393 (586.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 323373 bytes 35479386 (33.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 17 [root@firelap ovirt]# rpm -qa | grep ovirt ovirt-engine-cli-3.2.0.10-1.fc18.noarch ovirt-engine-backend-3.2.0-4.fc18.noarch ovirt-engine-config-3.2.0-4.fc18.noarch ovirt-host-deploy-1.0.0-1.fc18.noarch ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch ovirt-engine-restapi-3.2.0-4.fc18.noarch ovirt-engine-dbscripts-3.2.0-4.fc18.noarch ovirt-image-uploader-3.2.0-1.fc18.noarch ovirt-host-deploy-offline-1.0.0-1.fc18.noarch ovirt-engine-setup-3.2.0-4.fc18.noarch ovirt-release-fedora-5-3.noarch ovirt-engine-tools-common-3.2.0-4.fc18.noarch ovirt-engine-3.2.0-4.fc18.noarch ovirt-log-collector-3.2.0-1.fc18.noarch ovirt-host-deploy-java-1.0.0-1.fc18.noarch ovirt-engine-userportal-3.2.0-4.fc18.noarch ovirt-engine-notification-service-3.2.0-4.fc18.noarch ovirt-iso-uploader-3.2.0-1.fc18.noarch ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch ovirt-engine-sdk-3.2.0.9-1.fc18.noarch ovirt-engine-genericapi-3.2.0-4.fc18.noarch [root@firelap ~]# host firelap.usc.unirede.net firelap.usc.unirede.net has address 172.16.255.43 [root@firelap ~]# ping firelap.usc.unirede.net PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data. 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms [root@firelap ~]# engine-setup Welcome to oVirt Engine setup utility oVirt Engine uses httpd to proxy requests to the application server. It looks like the httpd installed locally is being actively used. The installer can override current configuration . Alternatively you can use JBoss directly (on ports higher than 1024) Do you wish to override current httpd configuration and restart the service? ['yes'| 'no'] [yes] : HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] : localhost.localdomain The IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain is not configured on any interface on this host User input failed validation, do you still wish to use it? (yes|no): no Host fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] : firelap.no-ip.org did not resolve into an IP address User input failed validation, do you still wish to use it? (yes|no): no Host fully qualified domain name. Note: this name should be fully resolvable [firelap.no-ip.org] : firelap.usc.unirede.net Enter a password for an internal oVirt Engine administrator user (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate [no-ip.org] : firelap.usc.unirede.net The engine can be configured to present the UI in three different application modes. virt [Manage virtualization only], gluster [Manage gluster storage only], and both [Manage virtualization as well as gluster storage] ['virt'| 'gluster'| 'both'] [both] : The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'| 'POSIXFS'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Enter a password for a local oVirt Engine DB admin user (engine) : Warning: Weak Password. Confirm password : Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso Error: directory /firebackup/ovirt/iso is not empty Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso Firewall ports need to be opened. The installer can configure firewall automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example file. Which firewall do you wish to configure? ['None'| 'Firewalld'| 'IPTables']: IPTables Configure VDSM on this host? ['yes'| 'no'] [yes] : Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms Confirm root password : oVirt Engine will be installed using the following configuration: ================================================================= override-httpd-config: yes http-port: 80 https-port: 443 host-fqdn: firelap.usc.unirede.net auth-pass: ******** org-name: firelap.usc.unirede.net application-mode: both default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /firebackup/ovirt/iso override-firewall: IPTables config-allinone: yes storage-path: /firebackup/ovirt/vms superuser-pass: ******** Proceed with the configuration listed above? (yes|no): yes Installing: AIO: Validating CPU Compatibility... [ DONE ] AIO: Adding firewall rules... [ DONE ] Configuring oVirt Engine... [ DONE ] Configuring JVM... [ DONE ] Creating CA... [ DONE ] Updating ovirt-engine service... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall... [ DONE ] Starting ovirt-engine Service... [ DONE ] Configuring HTTPD... [ DONE ] AIO: Creating storage directory... [ DONE ] AIO: Adding Local Datacenter and cluster... [ DONE ] AIO: Adding Local host (This may take several minutes)... [ ERROR ] Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs. Please check log file /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more information 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0 2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action httpd on service stop 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command --> '/sbin/service httpd stop' 2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output = 2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = Redirecting to /bin/systemctl stop httpd.service 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0 2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action httpd on service start 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command --> '/sbin/service httpd start' 2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output = 2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = Redirecting to /bin/systemctl start httpd.service 2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 0 2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running makeStorageDir 2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: Creating/Verifying local domain path 2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux context 2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context for /firebackup/ovirt/vms 2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t /firebackup/ovirt/vms(/.*)?' 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0 2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command --> '/sbin/restorecon -r /firebackup/ovirt/vms' 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running waitForJbossUp 2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss status. 2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and running. 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI 2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the API object 2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC 2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the local datacenter 2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running createCluster 2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the local cluster 2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running createHost 2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local host 2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running waitForHostUp 2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational 2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host status is: installing 2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 308, in isHostUp raise Exception(INFO_CREATE_HOST_WAITING_UP) Exception: Waiting for the host to start 2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational 2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host status is: installing 2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 308, in isHostUp raise Exception(INFO_CREATE_HOST_WAITING_UP) Exception: Waiting for the host to start 2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host to become operational 2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host status is: install_failed 2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 306, in isHostUp raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED) RetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs. 2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 294, in waitForHostUp utils.retry(isHostUp, tries=120, timeout=600, sleep=5) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in retry raise e RetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs. 2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following params were used as user input: 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-httpd-config: yes 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 80 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 443 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords: no 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn: firelap.usc.unirede.net 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: ******** 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name: firelap.usc.unirede.net 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode: both 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type: NFS 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-remote-install: local 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass: ******** 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp: /firebackup/********/iso 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name: ISO_DOMAIN 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-firewall: IPTables 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone: yes 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path: /firebackup/********/vms 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass: ******** 2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most recent call last): File "/bin/engine-setup", line 2363, in <module> main(confFile) File "/bin/engine-setup", line 2146, in main runSequences() File "/bin/engine-setup", line 2068, in runSequences controller.runAllSequences() File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in runAllSequences sequence.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in run step.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 294, in waitForHostUp utils.retry(isHostUp, tries=120, timeout=600, sleep=5) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in retry raise e RetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs. Thnkz for attention. Marcelo Barbosa *mr.marcelo.barbosa(a)gmail.com*

3 14

[Users] otopi needed on oVirt node?
by Gianluca Cecchi 19 Mar '13

19 Mar '13

Hello, comparing rpm packages installed on two f18 systems that are nodes of a 3.2 cluster, I notice this difference: > otopi-1.0.0-1.fc18.noarch > ovirt-host-deploy-1.0.1-1.fc18.noarch I think ovirt-host-deploy is not necessary and that I can remove from the only node where it is installed. What about otopi? Thanks, Gianluca

3 6

Re: [Users] BUG: soft lockup
by suporte＠logicworks.pt 19 Mar '13

19 Mar '13

------=_Part_259_6936283.1363686391577 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Yes the newer kernels does not work.=20 I installed kernel kernel-3.6.11-3.fc18.x86_64.rpm and everything works now= =20 Thanks=20 Jose=20 ----- Mensagem original ----- De: "Joop van de Wege" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt=20 Enviadas: S=C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt schreef:=20 So, there is not a solid solution for this?=20 ----- Mensagem original -----=20 De: "Joop" <jvdwege(a)xs4all.nl>=20 Para: suporte(a)logicworks.pt, Users(a)ovirt.org=20 Enviadas: Sexta-feira, 15 Mar=C3=A7o, 2013 21:57:35=20 Assunto: Re: [Users] BUG: soft lockup=20 suporte(a)logicworks.pt wrote:=20 I have a host that have this error BUG: soft lockup - CPU#4 stuck for 22s! = [sh: 1534], and the host died=20 this host was installed from fedora18 minimum installation, kernel version = 3.8.2-206.fc18.x86_64. I have another host with the same configuration, and= have no errors, until now.=20 Any idea?=20 Users mailing list=20 Users(a)ovirt.org=20 http://lists.ovirt.org/mailman/listinfo/users=20 Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk.=20 Hosts are HP ML110G5, HP DL360 G6, from memory=20 Joop=20 Sticking to the 3.6 kernel works each and every time. I still try new kerne= ls once in a while but it seems that anything after it isnt stable.=20 ------=_Part_259_6936283.1363686391577 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: verdana,helvetica,sans-serif; font-size: 10pt; co= lor: #330066'>Yes the newer kernels does not work.<br>I installed  ker= nel <span style=3D"font-size: 16pt; line-height: 115%; font-family:= "Calibri","sans-serif";" lang=3D"EN-US">kernel-3.6.11-= 3.fc18.x86_64.rpm and everything works now<br><br>Thanks<br><br>Jose<br></s= pan><br><hr id=3D"zwchr"><div style=3D"color: rgb(0, 0, 0); font-weight: no= rmal; font-style: normal; text-decoration: none; font-family: Helvetica,Ari= al,sans-serif; font-size: 12pt;"><b>De: </b>"Joop van de Wege" <jvdwege@= xs4all.nl><br><b>Para: </b>suporte(a)logicworks.pt<br><b>Enviadas: </b>S= =C3=A1bado, 16 de Mar=C3=A7o de 2013 8:06:25<br><b>Assunto: </b>Re: [Users]= BUG: soft lockup<br><br><div class=3D"gmail_quote">suporte(a)logicworks.pt s= chreef:<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt 0.8ex= ; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"> <pre style=3D"white-space: pre-wrap; word-wrap: break-word; font-family: sa= ns-serif; margin-top: 0px;">So, there is not a solid solution for this?<br>= <br>----- Mensagem original -----<br>De: "Joop" <jvdwege(a)xs4all.nl><b= r>Para: suporte(a)logicworks.pt, Users(a)ovirt.org<br>Enviadas: Sexta-feira, 15= Mar=C3=A7o, 2013 21:57:35<br>Assunto: Re: [Users] BUG: soft lockup<br><br>= suporte(a)logicworks.pt wrote: <br><br><br>I have a host that have this error= BUG: soft lockup - CPU#4 stuck for 22s! [sh: 1534], and the host died <br>= <br>this host was installed from fedora18 minimum installation, kernel vers= ion 3.8.2-206.fc18.x86_64. I have another host with the same configuration,= and have no errors, until now. <br><br>Any idea? <br><br><br><br><br><br>U= sers mailing list <br>Users(a)ovirt.org <br><a href=3D"http://lists.ovirt.org= /mailman/listinfo/users" target=3D"_blank">http://lists.ovirt.org/mailman/l= istinfo/users</a> <br><br>Just to let you know you're not alone. I ! have a few hosts which have the same problem. F18 minimal install, started at 3.6.= x kernel. Every upgrade since has had this. Some reboots! at higher version= s work, mostly not. Disabling multipath might help but then vdsm doesn't wo= rk. <br>Hosts are HP ML110G5, HP DL360 G6, from memory <br><br>Joop </pre><= /blockquote></div><br clear=3D"all">Sticking to the 3.6 kernel works each a= nd every time. I still try new kernels once in a while but it seems that an= ything after it isnt stable.<br> </div><br></div></body></html> ------=_Part_259_6936283.1363686391577--

2 2

[Users] Behavior when putting SPM node into mainenance
by Gianluca Cecchi 19 Mar '13

19 Mar '13

Hello 3.2 oVirt cluster based on f18 nodes One node is SPM (f18ovn03) I put the other node (f18ovn01) into maintenance and stop vdsmd and update, so that I take it to 3.2.1 (engine already updated and restarted before) It correctly joins the cluster and I live migrate my 5 VM to it: fedora 18 w7 2 x centos 5.6 slackware 32bit I then put into maintenance the SPM node that doesn't have any VM. I stop vdsmd on it and update packages I see these messages in the gui, because I think the surviving node takes some time to become the SPM now. Apparently no problems at my side. Are these messages expected? Or did I have to make anything before putting the SPM node into maintenance (something like elect the other one as SPM if it exist...)? Any operational test to prove correct SPM role now for f18ovn01 ? Thanks Gianluca 2013-Mar-19, 14:47 Storage Pool Manager runs on Host f18ovn01 (Address: 10.4.4.58). 2013-Mar-19, 14:47 Storage Pool Manager runs on Host f18ovn01 (Address: 10.4.4.58). 2013-Mar-19, 14:47 Invalid status on Data Center Default. Setting status to Non-Responsive. 2013-Mar-19, 14:47 Host f18ovn03 was switched to Maintenance mode by admin@internal.

2 1

Re: [Users] Failed to Start VM (Run Once) due to internal spice channel error
by Omer Frenkel 19 Mar '13

19 Mar '13

------=_Part_21945715_1396613307.1363700583069 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit ----- Original Message ----- > From: "Tom Rogers" <trogers1884(a)gmail.com> > To: "Omer Frenkel" <ofrenkel(a)redhat.com> > Sent: Tuesday, March 19, 2013 3:29:03 PM > Subject: Re: [Users] Failed to Start VM (Run Once) due to internal > spice channel error > Thanks Omer > I'm attaching the vdsm log and the libvirt log. They both pretty much > say the same thing, but from the vdsm.log, it looks like to us that > the data is being pulled from the database ok but is being parsed > incorrectly for spice. > Thanks again. > Tom Rogers well following David's comment, looking at http://gerrit.ovirt.org/#/c/12697 it seems that the name change some how caused this. Ravi, how did you verify this? what is missing? is it a bug in vdsm parsing? > On Tue, Mar 19, 2013 at 3:58 AM, Omer Frenkel < ofrenkel(a)redhat.com > > wrote: > > > From: "Tom Rogers" < trogers1884(a)gmail.com > > > > > > > To: users(a)ovirt.org > > > > > > Sent: Monday, March 18, 2013 10:22:52 PM > > > > > > Subject: [Users] Failed to Start VM (Run Once) due to internal > > > spice > > > channel error > > > > > > When trying to run a first time (Run Once) VM install, the vm > > > session > > > fails to start. When we look into the libvirtd.log on the host, > > > we > > > find the following error: > > > > > > virDomainGraphicsDefParseXML:6566 : internal error unknown spice > > > channel name ain > > > > > > in the lines right above message, contained in the xmlDESC we > > > find > > > the following snippet: > > > > > > <channel type="spicevmc"> > > > > > > <target name="com.redhat.spice.0" type="virtio"/> > > > > > > </channel> > > > > > > <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" > > > passwdValidTo="1970-01-01T00:00:01" port="-1" tlsPort="-1" > > > type="spice"> > > > > > > <channel mode="secure" name="ain"/> > > > > > > <channel mode="secure" name="nputs"/> > > > > > > <channel mode="secure" name="ursor"/> > > > > > > <channel mode="secure" name="layback"/> > > > > > > <channel mode="secure" name="ecord"/> > > > > > > <channel mode="secure" name="isplay"/> > > > > > > <channel mode="secure" name="sbredir"/> > > > > > > <channel mode="secure" name="martcard"/> > > > > > > </graphics> > > > > > > It looks to us that the xml may be malformed due to the seemingly > > > first character missing in the channel names. > > > > > > Does this make any sense to anyone? > > > > > > On master: > > > > > > Ovirt-engine 3.3.0-0.2.master.20130313215708 > > > > > > On node: > > > > > > qemu-kvm 1.2.2-7.fc18 > > > > > > vdsm-xmlrpc 4.10.3-10.fc18 > > > > > > libvirt-daemon 0.10.2.3-1.fc18 > > > > > > ------------------------------------------ > > > > > > Tom Rogers > > > > > > _______________________________________________ > > > > > > Users mailing list > > > > > > Users(a)ovirt.org > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > indeed looks like first letter is missing, this is what the engine > > sends: > > > engine=# select * from vdc_options where option_name = > > 'SpiceSecureChannels'; > > > option_id | option_name | option_value | version > > > -----------+---------------------+---------------------------------------------------------------+--------- > > > 345 | SpiceSecureChannels | smain,sinputs | 3.0 > > > 346 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.1 > > > 347 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.2 > > > 348 | SpiceSecureChannels | > > main,inputs,cursor,playback,record,display,usbredir,smartcard | 3.3 > > > can you please attach relevant vdsm log for this run? > > > Thanks > > -- > ------------------------------------------ > Tom Rogers ------=_Part_21945715_1396613307.1363700583069 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: times new roman,new york,times,serif; font-size: = 12pt; color: #000000'><br><br><hr id=3D"zwchr"><blockquote style=3D"border-= left:2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000= ;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helv= etica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Tom Rogers" <troge= rs1884(a)gmail.com><br><b>To: </b>"Omer Frenkel" <ofrenkel(a)redhat.com&g= t;<br><b>Sent: </b>Tuesday, March 19, 2013 3:29:03 PM<br><b>Subject: </b>Re= : [Users] Failed to Start VM (Run Once) due to internal spice channel error= <br><br><div dir=3D"ltr"><div><div><div>Thanks Omer<br><br></div>I'm attach= ing the vdsm log and the libvirt log. They both pretty much say the same th= ing, but from the vdsm.log, it looks like to us that the data is being pull= ed from the database ok but is being parsed incorrectly for spice.<br> <br></div>Thanks again.<br></div>Tom Rogers<br></div><div id=3D"DWT2674" cl= ass=3D"gmail_extra"><br></div></blockquote>well following David's comment,<= br>looking at <br>http://gerrit.ovirt.org/#/c/12697<br>it seems that the na= me change some how caused this.<br>Ravi, how did you verify this? what is m= issing?<br>is it a bug in vdsm parsing?<br><blockquote style=3D"border-left= :2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000;fon= t-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetic= a,Arial,sans-serif;font-size:12pt;"><div class=3D"gmail_extra"><br><div cla= ss=3D"gmail_quote">On Tue, Mar 19, 2013 at 3:58 AM, Omer Frenkel <span dir= =3D"ltr"><<a href=3D"mailto:ofrenkel@redhat.com" target=3D"_blank">ofren= kel(a)redhat.com</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p= x #ccc solid;padding-left:1ex"><div><div style=3D"font-size:12pt;font-famil= y:times new roman,new york,times,serif"><br><br><hr><blockquote style=3D"pa= dding-left:5px;font-size:12pt;font-style:normal;margin-left:5px;font-family= :Helvetica,Arial,sans-serif;text-decoration:none;font-weight:normal;border-= left:2px solid rgb(16,16,255)"> <b>From: </b>"Tom Rogers" <<a href=3D"mailto:trogers1884@gmail.com" targ= et=3D"_blank">trogers1884(a)gmail.com</a>><br><b>To: </b><a href=3D"mailto= :users@ovirt.org" target=3D"_blank">users(a)ovirt.org</a><br><b>Sent: </b>Mon= day, March 18, 2013 10:22:52 PM<br> <b>Subject: </b>[Users] Failed to Start VM (Run Once) due to internal spice= channel        error<div><div clas= s=3D"h5"><br><br><div dir=3D"ltr"><br clear=3D"all">When trying to run a fi= rst time (Run Once) VM install, the vm session fails to start. When we look= into the libvirtd.log on the host, we find the following error:<br> <br>virDomainGraphicsDefParseXML:6566 : internal error unknown spice channe= l name ain<br> <br>in the lines right above message, contained in the xmlDESC we find the = following snippet:<br><br>        &= nbsp;       <channel type=3D"spicevmc">= <br>           &nbsp= ;            <tar= get name=3D"com.redhat.spice.0" type=3D"virtio"/><br>             &nb= sp;   </channel><br>      &nb= sp;         <graphics autoport= =3D"yes" keymap=3D"en-us" listen=3D"0" passwd=3D"*****" passwdValidTo=3D"19= 70-01-01T00:00:01" port=3D"-1" tlsPort=3D"-1" type=3D"spice"><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"ain"/><br>      &= nbsp;           &nbs= p;     <channel mode=3D"secure" name=3D"nputs"/><= br>            =             <chan= nel mode=3D"secure" name=3D"ursor"/><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"layback"/><br>     &nb= sp;            =       <channel mode=3D"secure" name=3D"ecord"/&= gt;<br>           &n= bsp;            <= channel mode=3D"secure" name=3D"isplay"/><br>             &nb= sp;           <channel= mode=3D"secure" name=3D"sbredir"/><br>     &nb= sp;            =       <channel mode=3D"secure" name=3D"martcard= "/><br>          &nbsp= ;     </graphics><br> <br><br><br>It looks to us that the xml may be malformed due to the seeming= ly first character missing in the channel names.<br><br>Does this make any = sense to anyone?<br><br><br>On master:<br>Ovirt-engine   3.3.0-0.= 2.master.20130313215708<br> <br>On node:<br>qemu-kvm 1.2.2-7.fc18<br>vdsm-xmlrpc 4.10.3-10.fc18<br>libv= irt-daemon 0.10.2.3-1.fc18<br><br><br><br>---------------------------------= ---------<br>Tom Rogers<br> </div> <br></div></div>_______________________________________________<br>Users ma= iling list<br><a href=3D"mailto:Users@ovirt.org" target=3D"_blank">Users@ov= irt.org</a><br><a href=3D"http://lists.ovirt.org/mailman/listinfo/users" ta= rget=3D"_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br> </blockquote>indeed looks like first letter is missing, this is what the en= gine sends:<br><br>engine=3D# select * from vdc_options where option_name = =3D 'SpiceSecureChannels';<br> option_id |     opt= ion_name     |      &nbsp= ;            &n= bsp;     option_value     &nbs= p;            &= nbsp;       | version <br> -----------+---------------------+-----------------------------------------= ----------------------+---------<br>       34= 5 | SpiceSecureChannels | smain,sinputs      =             &nb= sp;            =             &nb= sp;     | 3.0<br>       3= 46 | SpiceSecureChannels | main,inputs,cursor,playback,record,display,usbre= dir,smartcard | 3.1<br>        347 | SpiceSecureChannels | main,input= s,cursor,playback,record,display,usbredir,smartcard | 3.2<br>  &n= bsp;    348 | SpiceSecureChannels | main,inputs,cursor,playb= ack,record,display,usbredir,smartcard | 3.3<br><br>can you please attach re= levant vdsm log for this run?<br> Thanks<br></div></div></blockquote></div><br><br clear=3D"all"><br>-- <br><= br>------------------------------------------<br>Tom Rogers<br> </div> </blockquote><br></div></body></html> ------=_Part_21945715_1396613307.1363700583069--

1 0

[Users] Failed to Start VM (Run Once) due to internal spice channel error
by Tom Rogers 19 Mar '13

19 Mar '13

When trying to run a first time (Run Once) VM install, the vm session fails to start. When we look into the libvirtd.log on the host, we find the following error: virDomainGraphicsDefParseXML:6566 : internal error unknown spice channel name ain in the lines right above message, contained in the xmlDESC we find the following snippet: <channel type="spicevmc"> <target name="com.redhat.spice.0" type="virtio"/> </channel> <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" tlsPort="-1" type="spice"> <channel mode="secure" name="ain"/> <channel mode="secure" name="nputs"/> <channel mode="secure" name="ursor"/> <channel mode="secure" name="layback"/> <channel mode="secure" name="ecord"/> <channel mode="secure" name="isplay"/> <channel mode="secure" name="sbredir"/> <channel mode="secure" name="martcard"/> </graphics> It looks to us that the xml may be malformed due to the seemingly first character missing in the channel names. Does this make any sense to anyone? On master: Ovirt-engine 3.3.0-0.2.master.20130313215708 On node: qemu-kvm 1.2.2-7.fc18 vdsm-xmlrpc 4.10.3-10.fc18 libvirt-daemon 0.10.2.3-1.fc18 ------------------------------------------ Tom Rogers

3 2

[Users] Where is live block migration?
by nnex 18 Mar '13

18 Mar '13

This is a multi-part message in MIME format. --------------050807000403030104030500 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi all. I'm successfully install a oVirt 3.2(fedora 18 distr). I'm successfuly deploy cluster also with two NFS storage also. But I'm can't "move" block device in VM to 2nd storage? i can't locate "move" button according this http://www.ovirt.org/Features/Design/StorageLiveMigration guide. Please help anyone. --------------050807000403030104030500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi all.<br> I'm successfully install a oVirt 3.2(fedora 18 distr). I'm successfuly deploy cluster also with two NFS storage also. But I'm can't "move" block device in VM to 2nd storage? i can't locate "move" button according this <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <a href="http://www.ovirt.org/Features/Design/StorageLiveMigration">http://www.ovirt.org/Features/Design/StorageLiveMigration</a> guide.<br> Please help anyone.<br> </body> </html> --------------050807000403030104030500--

4 3