- Users - oVirt List Archives

Re: [ovirt-users] Migrate machines in unknown state?
by Nicolás 10 Aug '16

10 Aug '16

El 04/08/16 a las 15:25, Arik Hadas escribió: > > ----- Original Message ----- >> El 2016-08-04 08:24, Arik Hadas escribió: >>> ----- Original Message ----- >>>> >>>> El 04/08/16 a las 07:18, Arik Hadas escribió: >>>>> ----- Original Message ----- >>>>>> Hi, >>>>>> >>>>>> We're running oVirt 4.0.1 and today I found out that one of our hosts >>>>>> has all its VMs in an unknown state. I actually don't know how (and >>>>>> when) did this happen, but I'd like to restore service possibly without >>>>>> turning off these machines. The host is up, the VMs are up, 'qemu' >>>>>> process exists, no errors, it's just the VMs running on it that have a >>>>>> '?' where status is defined. >>>>>> >>>>>> Is it safe in this case to simply modify database and set those VM's >>>>>> status to 'up'? I remember having to do this a time ago when we faced >>>>>> storage issues, it didn't break anything back then. If not, is there a >>>>>> "safe" way to migrate those VMs to a different host and restart the >>>>>> host >>>>>> that marked them as unknown? >>>>> Hi Nicolás, >>>>> >>>>> I assume that the host these VMs are running on is empty in the >>>>> webadmin, >>>>> right? if that is the case then you've probably hit [1]. Changing their >>>>> status to up is not the way to go since these VMs will not be monitored. >>>> Hi Arik, >>>> >>>> By "empty" you mean the webadmin reports the host being running 0 VMs? >>>> If so, that's not the case, actually the VM count seems to be correct >>>> in >>>> relation to "qemu-*" processes (about 32 VMs), I can even see the >>>> machines in the "Virtual machines" tab of the host, it's just they are >>>> all marked with the '?' mark. >>> No, I meant the 'Host' column in the Virtual Machines tab but if you >>> see >>> the VMs in the "Virtual machines" sub-tab of the host then run_on_vds >>> points to the right host.. >>> >>> The host is up in the webadmin as well? >>> Can you share the engine log? >>> >> Yes, the host is up in the webadmin, there are no issues with it, just >> the VMs running on it have the '?' mark. I've made 3 tests: >> >> 1) Restart engine: did not help >> 2) Check firewall, seems to be ok. >> 2) PostgreSQL: UPDATE vm_dynamic SET status = 1 WHERE status = 8; : >> After a while, I see lots of entries like this: >> >> 2016-08-04 09:23:10,910 WARN >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (DefaultQuartzScheduler4) [6ad135b8] Correlation ID: null, Call Stack: >> null, Custom Event ID: -1, Message: VM xxx is not responding. >> >> I'm attaching the engine log, but I don't know when did this happen for >> the first time, though. If there's a manual way/command to migrate VMs >> to a different host I'd appreciate a hint about it. >> >> Is it safe to restart vdsmd on this host? > The engine log looks fine - the VMs are reported as not-responding for > some reason. I would restart libvirtd and vdsmd then Is restarting those two daemons safe? I mean, will that stop all qemu-* processes, so the VMs marked as unknown will stop? >> Thanks. >> >>>> Thanks. >>>> >>>>> Yes, there is no other way to resolve it other than changing the DB but >>>>> the change should be to update run_on_vds field of these VMs to the host >>>>> you know they are running on. Their status will then be updates in 15 >>>>> sec. >>>>> >>>>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1354494 >>>>> >>>>> Arik. >>>>> >>>>>> Thanks. >>>>>> >>>>>> Nicolás >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users(a)ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>

4 4

problem setting up bonding via rest in ovirt 3.6.6.2
by Sven Kieske 09 Aug '16

09 Aug '16

--j9oOhf6Grf0fFqlEVUxQMWAcfqJklkQI7 Content-Type: multipart/mixed; boundary="T7QE2T6V8U03TuXieVjo1CtXdRsCW5TA8" From: Sven Kieske <s.kieske(a)mittwald.de> To: users(a)ovirt.org Cc: devel <devel(a)ovirt.org> Message-ID: <69e3d02d-ac52-37d7-e8f6-5bc8be8c0d40(a)mittwald.de> X-Authenticated-mymxserver.com: Yes Subject: problem setting up bonding via rest in ovirt 3.6.6.2 --T7QE2T6V8U03TuXieVjo1CtXdRsCW5TA8 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi, I'd like to setup host network in the following way: I have 4 interfaces: eth0, eno1, eno2, eno3 ovirtmgmt network resides on eth0 and is working. Now I want to setup a bonding with the slave interfaces eno2 and eno3 via the hosts "setupnetworks" function: URL: https://engine-fqdn/api/hosts/9cdcc85b-dd87-4dcf-9275-b993ee5b5e9c/nics/s= etupnetworks Request: { "modified_bonds": { "host_nic": [{ "name": "bond0", "bonding": { "options": { "option": [{ "name": "mode", "value": "1" }, { "name": "miimon", "value": "100" }] }, "slaves": { "host_nic": [{ "name": "eno2" }, { "name": "eno3" }] } } }] } } Response from ovirt-engine: <?xml version=3D"1.0" encoding=3D"UTF-8" standalone=3D"yes"?> <fault> <reason>Incomplete parameters</reason> <detail>Action [hostNics] required for setupNetworks</detail> </fault> When I look at the rsdl docs this seems perfectly fine. I tried google with this error condition but it didn't return anything useful unfortunately. Your help would be greatly appreciated. The official RH docs also do not mention anything else: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html-single/REST_API_Guide/index.html#Multiple_Network_Setup_A= ction https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html-single/REST_API_Guide/index.html#Bonded_Interfaces Also this tool doesn't seem to mention anything else: https://jhernand.fedorapeople.org/ovirt-api-explorer/#/services/host/meth= ods/setup_networks --=20 Mit freundlichen Gr=C3=BC=C3=9Fen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG K=C3=B6nigsberger Stra=C3=9Fe 6 32339 Espelkamp T: +495772 293100 F: +495772 293333 https://www.mittwald.de Gesch=C3=A4ftsf=C3=BChrer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhause= n Komplement=C3=A4rin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oey= nhausen --T7QE2T6V8U03TuXieVjo1CtXdRsCW5TA8-- --j9oOhf6Grf0fFqlEVUxQMWAcfqJklkQI7 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBAgAGBQJXqfNTAAoJEMby9TMDAbQR9NwQAJ4xm0JeDqRnjW8DuAae6wCz RLWbGMyhn5jqcL7bRQAU/oppW0FAFGo+So72kwvX29AkII+qRZJnHyHWMo6nnO3s XnCR23uAk33KH02jmyzVNq9cA6VmckTHX3CWU6cq6WxTA8jhDKNSu7SLkUvOD3/u pUDGNvoYZJTsN2DU6qQJiROMkIu+zgm0LF9RXKdVcA+tE1G9XuOwz+QBqgAfiWgc bCD3mWIF+OBfwQoN1GIhe7sxZm3TxJs+Y7UtpotN/hYULXIJffsjU/Lo6e5pEYJY aPIfPUscPlAr51alEiR11zN9pgzhShqvRW61GHxsxkxTXPn8JVsch2uD4sCe8pQn 8C8Tz9+gdq0tM/gvM3nyYTIcHmMr7ZDn44lyd+x98uJWsUNOuraQH18nAIrs+kaw TfonDACJKM5t8DQM1FgmUA0nWdS3X5UCcY8LSIHpA5dhLk9sRUWehfvqPl1zDrpJ uTcOF5/POD7vgpf4Aja9vOlcgrKZJGrKPWGDq2IJkX1OoaeGe2KsIf3VqzqxFG0g l8UlR9zIeXwslLcfvRpt4YUJT27l3zHkaC6glZo+vkXbvb0fUPVwKfV3Xcyaz9G+ BIs1dC1iYrVGUURaDu8yZ/SZQ5zigD/I/wudKvTgelR8Wd8Y3MStmpkADozqBwY3 hQG0y+cMX/7gvpOsD7cw =0XKM -----END PGP SIGNATURE----- --j9oOhf6Grf0fFqlEVUxQMWAcfqJklkQI7--

2 1

3.6 : Hosted_Storage unattached
by Alexis HAUSER 09 Aug '16

09 Aug '16

Hi, I installed a new node with a new hosted engine, version 3.6, added a data domain, but I can't see the hosted_storage. I tried to use the "import storage" on it but it keeps having unattached status, and in the logs I can see : "2016-08-09 05:39:32,821 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp-/127.0.0.1:8702-1) [] Correlation ID: 1d9c8f67, Job ID: 6e75d61e-3140-4f1c-a301-e683ddc28b1f, Call Stack: null, Custom Event ID: -1, Message: This Data center compatibility version does not support importing a data domain with its entities (VMs and Templates). The imported domain will be imported without them." Any ideas ?

2 2

oVirt 4 and Gluster network
by Arsène Gschwind 09 Aug '16

09 Aug '16

Hi, We have setup an oVirt 4 cluster using Gluster as storage backend. I've setup a separate 10 Gb Network for Gluster traffic and tried to use that network as written in : https://www.ovirt.org/develop/release-management/features/network/select-ne… But I'm not able to find the "Edit - Brick" menu to be able to set the IP to use for existing bricks. Is this not implemented yet? The feature status says "done". I've been able to create new bricks using that network and it seems the traffic is going trough the right nics. Thanks for any hint. regards, Arsène

2 1

Hosted Engine Storage Domain Stuck and no Volumes tab?
by Dan Lavu 09 Aug '16

09 Aug '16

So this is on 4.0.1, Fedora 23, the engine is running fine on glusterfs, on a 3 replica arbiter 1 volume, the hosted_engine attached storage domain is *stuck* in offline, wondernig if there is anyway to fix that? Since the domain cannot be managed inside the engine. Also I have gluster enabled for one of my clusters but I'm missing a volumes tab to manage the gluster volumes? The hosts, when putting them into maintenaince, I have the option to turn off gluster... I know in 3.5-3.6 volume management was a feature, did this change? Thanks, Dan

2 2

Cannot locate vdsm package, possible cause is incorrect channels
by Huan He (huhe) 08 Aug '16

08 Aug '16

I have ovirt engine 3.6 on centos 6.5 and tried to add centos 6.5 host. I used the command below to install the host yum localinstall http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm The ovirt repo are listed below. I tried to uncomment out the baseurl, still got the same issue. Any idea? It looks to me it failed to find the vdsm pkgs. Thanks, Huan [root@host-182 yum.repos.d]# more ovirt-3.6*.repo :::::::::::::: ovirt-3.6-dependencies.repo :::::::::::::: [ovirt-3.6-epel] name=Extra Packages for Enterprise Linux 6 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$bas… failovermethod=priority enabled=1 includepkgs=epel-release,python-uinput,puppet,python-lockfile,python-cpopen,python-ordereddict,python-pthreading,python-inotify,python-argparse,novnc,python-ply, python-kitchen,python-daemon,python-websockify,livecd-tools,spice-html5,mom,python-IPy,python-ioprocess,ioprocess,safelease,rubygem-rgen,ovirt-guest-agent,pyxatt r,userspace-rcu gpgcheck=1 gpgkey=https://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL-6 [ovirt-3.6-jpackage-6.0-generic] name=JPackage 6.0, for generic mirrorlist=http://www.jpackage.org/mirrorlist.php?dist=generic&type=free&re… enabled=1 gpgcheck=1 includepkgs=dom4j,isorelax,jaxen,jdom,msv,msv-xsdlib,relaxngDatatype,servicemix-specs,tomcat5-servlet-2.4-api,ws-jaxme,xalan-j2,xml-commons,xml-commons-jaxp-1.2- apis,xml-commons-resolver11,xom,xpp2,xpp3,antlr3,stringtemplate gpgkey=http://www.jpackage.org/jpackage.asc [ovirt-3.6-centos-gluster37] name=CentOS-$releasever - Gluster 3.7 baseurl=http://mirror.centos.org/centos/$releasever/storage/$basearch/glust… gpgcheck=1 enabled=1 gpgkey=https://raw.githubusercontent.com/CentOS-Storage-SIG/centos-release-… [ovirt-3.6-patternfly1-noarch-epel] name=Copr repo for patternfly1 owned by patternfly baseurl=http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfl… enabled=1 skip_if_unavailable=1 gpgcheck=0 [virtio-win-stable] name=virtio-win builds roughly matching what was shipped in latest RHEL baseurl=http://fedorapeople.org/groups/virt/virtio-win/repo/stable enabled=1 skip_if_unavailable=1 gpgcheck=0 :::::::::::::: ovirt-3.6.repo :::::::::::::: [ovirt-3.6] name=Latest oVirt 3.6 Release #baseurl=http://resources.ovirt.org/pub/ovirt-3.6/rpm/el$releasever/ mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.6-el$… enabled=1 skip_if_unavailable=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-3.6 [root@host-182 yum.repos.d]#

3 3

management interface
by Fernando Fuentes 08 Aug '16

08 Aug '16

Team, Is it possible to move the ovirt management interface to a separate vlan and keep it from been on the same interface as my LAN? IE: assign a tag to ovirtmanagement and keep another interface as untag for my LAN to use with the VM's Thoughts ideas? TIA! Regards, -- Fernando Fuentes ffuentes(a)txweather.org http://www.txweather.org

3 8

2 NIC Configuration
by Michael Cooper 08 Aug '16

08 Aug '16

Hello Everyone, I am new to oVirt actively, however I am a long time follower. I apologize if this question has been asked before but i am not finding good info on it or I am looking in the worng place or search terms are poor. I have installed oVirt on a Dell SC1435 Server with 16 gb of ram and a 1 tb drive. It also has 2 nics however I am only seeing one in the Web UI, how would I go about adding my second NIC to this configration? My reasoning for this NIC 1 is used for VM communication and internet and NIC 2 is used for Storage and management. Hopefully that makes sense. Thank you so very much for time and pardon me for asking a dumb question. Michael Cooper http://coopfire.com Linux/VMWare Certified Professional

2 1

oVirt 4.0 Hosted Engine
by Arsène Gschwind 08 Aug '16

08 Aug '16

This is a multi-part message in MIME format. --------------7EEE0783432E5837A1C9C9DB Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 8bit Hi, I have an oVirt setup with 2 server using hosted-engine, both server resgistered properly the hosted-engine using : # hosted-engine --deploy but for some reason the second isn't recognized as a host for hosted-engine and I'm not able to migrate the hosted-engine. The error I get when trying to migrate: * Cannot migrate VM. There is no host that satisfies current scheduling constraints. See below for details: * The host xxxxxx did not satisfy internal filter HA because it is not a Hosted Engine host.. I've tried to redeploy the hosted-engine but this will fail since the host already exists in the management DB. I've tried to redeploy the host using the GUI when editing the Host and set DEPLOY at Hosted Engine but in that case the Event just says the configuration was updated but nothing happens. Is there a way to check if the host is registered as hosted-engine host? How could I register it correctly? Let me know if you need any logs. Thanks for any hint. Regards, Arsène --------------7EEE0783432E5837A1C9C9DB Content-Type: text/html; charset=windows-1252 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=windows-1252"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, I have an oVirt setup with 2 server using hosted-engine, both server resgistered properly the hosted-engine using : # hosted-engine --deploy but for some reason the second isn't recognized as a host for hosted-engine and I'm not able to migrate the hosted-engine. The error I get when trying to migrate: <meta http-equiv="content-type" content="text/html; charset=windows-1252"> <ul style="box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; color: rgb(0, 0, 0); font-family: "Arial Unicode MS", Arial, sans-serif; font-size: small; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; line-height: 21.6667px; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255);"> <li style="box-sizing: border-box;">Cannot migrate VM. There is no host that satisfies current scheduling constraints. See below for details:</li> <li style="box-sizing: border-box;">The host xxxxxx did not satisfy internal filter HA because it is not a Hosted Engine host..</li> </ul> I've tried to redeploy the hosted-engine but this will fail since the host already exists in the management DB. I've tried to redeploy the host using the GUI when editing the Host and set DEPLOY at Hosted Engine but in that case the Event just says the configuration was updated but nothing happens. Is there a way to check if the host is registered as hosted-engine host? How could I register it correctly? Let me know if you need any logs. Thanks for any hint. Regards, Arsène </body> </html> --------------7EEE0783432E5837A1C9C9DB--

3 6

preallocated storage issue?
by Simon Barrett 08 Aug '16

08 Aug '16

--_000_D86C48DF8800164BBE50B87623F7AC9585F500F2ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable If I create a preallocated disk for a VM, I see the disk image file listing= as the size I requested (100G): cd /rhev/data-center/mnt/storage_host1:_vol_pa1__nas__01b__oVirt__prod__01/= 53560d43-874a-49c5-9c5a-8b90487c79f8/images/d97f7706-3662-40bf-9358-80e0dc5= 1bff4 root@ovirt_host> ls -l total 105064644 -rw-rw---- 1 vdsm kvm 107374182400 Aug 5 10:57 75c14559-e18f-4cc8-a3fe-bc0= de507720b -rw-rw---- 1 vdsm kvm 1048576 Aug 5 10:57 75c14559-e18f-4cc8-a3fe-bc0= de507720b.lease -rw-r--r-- 1 vdsm kvm 313 Aug 5 10:57 75c14559-e18f-4cc8-a3fe-bc0= de507720b.meta and the corresponding space used on disk matches root@ ovirt_host > du -sh * 101G 75c14559-e18f-4cc8-a3fe-bc0de507720b 1.1M 75c14559-e18f-4cc8-a3fe-bc0de507720b.lease 4.0K 75c14559-e18f-4cc8-a3fe-bc0de507720b.meta If I then migrate that storage (while the VM is shutdown) to a new storage = domain, the size on disk does not match the allocated size. In this case th= ere is nothing in the disk yet so it shows as 0. cd /rhev/data-center/mnt/storage_host2:_vol_pa1__ovirt__uatprod/1f2c2b48-1e= 77-4c98-a6da-5dc09b78cead/images/d97f7706-3662-40bf-9358-80e0dc51bff4 root@ ovirt_host> ls -l total 1032 -rw-rw---- 1 vdsm kvm 107374182400 Aug 5 11:06 75c14559-e18f-4cc8-a3fe-bc0= de507720b -rw-rw---- 1 vdsm kvm 1048576 Aug 5 11:06 75c14559-e18f-4cc8-a3fe-bc0= de507720b.lease -rw-r--r-- 1 vdsm kvm 313 Aug 5 11:06 75c14559-e18f-4cc8-a3fe-bc0= de507720b.meta root@ ovirt_host > du -sh * 0 75c14559-e18f-4cc8-a3fe-bc0de507720b 1.1M 75c14559-e18f-4cc8-a3fe-bc0de507720b.lease 4.0K 75c14559-e18f-4cc8-a3fe-bc0de507720b.meta oVirt still lists the disk as preallocated in the GUI but it is in fact thi= n provisioned. I see the same issue if I clone a preallocated VM. The size on disk ends up= being the equivalent of a thin-provisioned disk. I also had the issue when= importing VM's from an export domain when I had selected preallocated in t= he import dialog box. Is this a known issue? Should preallocated not mean preallocated on physica= l disk? Ovirt Engine is running 3.6.4.1-1.el6 The ovirt nodes are running: OS Version: RHEL - 7 - 2.1511.el7.centos.2.10 Kernel Version: 3.10.0 - 327.4.5.el7.x86_64 KVM Version: 2.3.0 - 31.el7_2.7.1 LIBVIRT Version: libvirt-1.2.17-13.el7_2.2 VDSM Version: vdsm-4.17.23.2-0.el7.centos SPICE Version: 0.12.4 - 15.el7 GlusterFS Version: [N/A] CEPH Version: librbd1-0.80.7-3.el7 Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC9585F500F2ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> If I create a preallocated disk for a VM, I see the = disk image file listing as the size I requested (100G):<o:p></o:p> <o:p> </o:p> cd /rhev/data-center/mnt/storage_host1:_vol_pa1__nas= __01b__oVirt__prod__01/53560d43-874a-49c5-9c5a-8b90487c79f8/images/d97f7706= -3662-40bf-9358-80e0dc51bff4<o:p></o:p> root@ovirt_host> ls -l<o:p></o:p> total 105064644<o:p></o:p> -rw-rw---- 1 vdsm kvm 107374182400 Aug  5 10:57= 75c14559-e18f-4cc8-a3fe-bc0de507720b<o:p></o:p> -rw-rw---- 1 vdsm kvm      = 1048576 Aug  5 10:57 75c14559-e18f-4cc8-a3fe-bc0de507720b.lease<o:p></= o:p> -rw-r--r-- 1 vdsm kvm     &= nbsp;    313 Aug  5 10:57 75c14559-e18f-4cc8-a3fe-bc0de= 507720b.meta<o:p></o:p> <o:p> </o:p> and the corresponding space used on disk matches<o:p= ></o:p> <o:p> </o:p> root@ ovirt_host > du -sh *<o:p></o:p> 101G    75c14559-e18f-4cc8-a3fe-bc0de= 507720b<o:p></o:p> 1.1M    75c14559-e18f-4cc8-a3fe-bc0de= 507720b.lease<o:p></o:p> 4.0K    75c14559-e18f-4cc8-a3fe-bc0de= 507720b.meta<o:p></o:p> <o:p> </o:p> If I then migrate that storage (while the VM is shut= down) to a new storage domain, the size on disk does not match the allocate= d size. In this case there is nothing in the disk yet so it shows as 0.<o:p= ></o:p> <o:p> </o:p> cd /rhev/data-center/mnt/storage_host2:_vol_pa1__ovi= rt__uatprod/1f2c2b48-1e77-4c98-a6da-5dc09b78cead/images/d97f7706-3662-40bf-= 9358-80e0dc51bff4<o:p></o:p> root@ ovirt_host> ls -l<o:p></o:p> total 1032<o:p></o:p> -rw-rw---- 1 vdsm kvm 107374182400 Aug  5 11:06= 75c14559-e18f-4cc8-a3fe-bc0de507720b<o:p></o:p> -rw-rw---- 1 vdsm kvm      = 1048576 Aug  5 11:06 75c14559-e18f-4cc8-a3fe-bc0de507720b.lease<o:p></= o:p> -rw-r--r-- 1 vdsm kvm     &= nbsp;    313 Aug  5 11:06 75c14559-e18f-4cc8-a3fe-bc0de= 507720b.meta<o:p></o:p> <o:p> </o:p> root@ ovirt_host > du -sh *<o:p></o:p> 0       75c14559-e18f-= 4cc8-a3fe-bc0de507720b<o:p></o:p> 1.1M    75c14559-e18f-4cc8-a3fe-bc0de= 507720b.lease<o:p></o:p> 4.0K    75c14559-e18f-4cc8-a3fe-bc0de= 507720b.meta<o:p></o:p> <o:p> </o:p> oVirt still lists the disk as preallocated in the GU= I but it is in fact thin provisioned.<o:p></o:p> <o:p> </o:p> I see the same issue if I clone a preallocated VM. T= he size on disk ends up being the equivalent of a thin-provisioned disk. I = also had the issue when importing VM’s from an export domain when I h= ad selected preallocated in the import dialog box.<o:p></o:p> <o:p> </o:p> Is this a known issue? Should preallocated not mean = preallocated on physical disk?<o:p></o:p> <o:p> </o:p> Ovirt Engine is running 3.6.4.1-1.el6<o:p></o:p> <o:p> </o:p> The ovirt nodes are running: <o:p></o:p> <o:p> </o:p> OS Version:      &nbsp= ;             &= nbsp;   RHEL - 7 - 2.1511.el7.centos.2.10<o:p></o:p> Kernel Version:       =           3.10.0 - 327.4.5.el7= .x86_64<o:p></o:p> KVM Version:       &nb= sp;            2.3.0= - 31.el7_2.7.1<o:p></o:p> LIBVIRT Version:      =          libvirt-1.2.17-13.el7_2.2<= o:p></o:p> VDSM Version:       &n= bsp;         vdsm-4.17.23.2-0.el7.c= entos<o:p></o:p> SPICE Version:       &= nbsp;          0.12.4 - 15.el7= <o:p></o:p> GlusterFS Version:     &nbs= p;     [N/A]<o:p></o:p> CEPH Version:       &n= bsp;           librbd1-0.= 80.7-3.el7<o:p></o:p> <o:p> </o:p> Many thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC9585F500F2ln2wio001devtra_--

2 6