- Users - oVirt List Archives

Network problem with bonding and Windows guests
by Maxence Sartiaux 26 May '16

26 May '16

------=_Part_1435_2021536601.1464168519260 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hello, I've a problem, all my ovirt hosts are linked with a bonding mode 4 (802.3ad LACP) 2x10Gbps Eveything is okay with unix guest but with Windows guest, i can ping but internet browsing is impossible (sometime i have a part of the page, very rare case) If i remove the bonding and bridge one interface, windows work good. I've tried with windows 7 and windows 10, guest additions are installed VirtIO / rtl3189 tested, same problem My bonding opts : mode=4 lacp_rate=1 miimon=100 Interface MTU 9000 Bonding mode 2 also tested ------=_Part_1435_2021536601.1464168519260 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: arial, helvetica, sans-serif; font-s= ize: 12pt; color: #000000"><div>Hello, </div><div><br data-mce-bogus= =3D"1"></div><div>I've a problem, all my ovirt hosts are linked with a bond= ing mode 4 (802.3ad LACP) 2x10Gbps</div><div>Eveything is okay with unix&nb= sp;guest but with Windows guest, i can ping but internet browsing is i= mpossible (sometime i have a part of the page, very rare case)</div><div><b= r data-mce-bogus=3D"1"></div><div>If i remove the bonding and bridge one in= terface, windows work good.</div><div><br data-mce-bogus=3D"1"></div><div>I= 've tried with windows 7 and windows 10, guest additions are installed</div= ><div>VirtIO / rtl3189 tested, same problem</div><div><br data-mce-bogus=3D= "1"></div><div>My bonding opts : mode=3D4 lacp_rate=3D1 miimon=3D100</div><= div>Interface MTU 9000</div><div><br data-mce-bogus=3D"1"></div><div>Bondin= g mode 2 also tested</div></div></body></html> ------=_Part_1435_2021536601.1464168519260--

3 3

Could not connect to the optimizer service
by Kapetanakis Giannis 25 May '16

25 May '16

Hi, I've just setup optimizer service following http://www.ovirt.org/develop/release-management/features/sla/optaplanner/ and https://github.com/oVirt/ovirt-optimizer I can access optimizer's interface and get the the solution result from both http and https. I can access it from both my pc and from ovirt-engine host with a browser at url ovirt-optimizer/result/Cluster_ID However in ovirt-engine interface I see Status: Could not connect to the optimizer service [status code: 0] Also I see no connection attempt from ovirt-engine to optimizer (with logging on optimizer's firewall). Engine is loading the conf: 2016-05-25 13:54:40,395 INFO [org.ovirt.engine.ui.frontend.server.gwt.plugin.PluginDataManager] (default task-20) [] Reading UI plugin configuration '/etc/ovirt-engine/ui-plugins/ovirt-optimizer-config.json' /etc/ovirt-engine/ui-plugins/ovirt-optimizer-config.json: "config": { "baseurl": "https://optimizer.example.com/ovirt-optimizer/result/" tried also "config": { "baseurl": "http://optimizer.example.com/ovirt-optimizer/result/" incase there was a problem with optimizer's certificate. Any ideas? How can I debug why the engine is not doing any attempt to get optimizer's result? best regards, Giannis

3 4

Maintenance on the Mailing-Lists
by Marc Dequènes (Duck) 25 May '16

25 May '16

This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --icFP63IMAedXNj60fBmf2k8l0p6AQh860 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Quack, I'm working in the OSAS team and arrived recently. Yoroshiku onegai shima= su. With the oVirt infra team we're working on the Mailing-Lists. In the past there was SPF problems leading to mails being classified as SPAM, especially affecting GMail users. A workaround was made, but it's not nice and history of this time was mostly lost. I'm then going to make some changes which I believe would work, but just in case I'm sending this message to the main Mailing-Lists so you can check your SPAM box and break my head on #ovirt@freenode if it fails :-).= Regards. --icFP63IMAedXNj60fBmf2k8l0p6AQh860 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAEBCgAGBQJXRpcnAAoJEFXp+fesHEQ/RfwP/RITPBFocGzccVi4W4eDVciS UCKSbESd3qM0SBfy9dcvX6+XOUDYOGGHr1n8IolJUCgUwisGgyTrP1vSgFugg1Jm pASltqVz6hhds6xxLVxOSdFsQmSW5EoPkgvzti0xryjlagIuS+zKb9gUtt48N2Tv LdypjmMJeeu4VcSFJi5fKnE7kidOf8rLU0UlvG7GwPc6cByV/oFPD5aQB/iGu3on 5w9E9y8oZ1YYDdMOxmu+wX3bMxlQzm3GPl7vLMHX/M3IS4jolY2+tFLbmTcCIq0R fFoY7kcCdvprtPSKwY7vDy8hu8+uir3ritH3joCZW1lCKifT2IWES4cI2wop8dEr U6lJqetTW+pJLOVVWGTXoD1uKSjIthUBzFXYGwEtiPPrV33L9A/ZijySmVlwhCKn mZ4gCwHB8GvksRV1wnNWFD+/xpETG184c67lh/LdPDo7BbUzoDAyIxJBaWy8dOxX BhANF41/VxbK2TEdP9aZ5msB0vK4A/wVqh02a404EumLIJSyhxbjzYAaHyezkvYP 7N2rVyMeJq1elYEOpD/xKLSY8ZzkaD0PzDqhC3FQfypGMn03K755O632RJ/XnHok WjHQ9QzkOxFQRFN3fnExGhWztDvb4NB4MwNXS/rZfikm4dxlHnnFDJsto/MgPi9L NjDPpahBTYv9LxOYFHlw =vadV -----END PGP SIGNATURE----- --icFP63IMAedXNj60fBmf2k8l0p6AQh860--

2 1

On 3.6.6, tried doing a live VM storage migration... didn't work
by Christopher Cox 25 May '16

25 May '16

In our old 3.4 ovirt, I know I've migrated storage on live VMs and everything seemed to work. However on 3.6.6, I tried this and I saw the warning about moving storage on a live VM (it wasn't doing much of anything) and I went ahead and migrated the storage from one storage domain to another. But when it was through, even though the VM was still alive, when I tried to write to a virtual disk that was part of the move, it paused the VM saying there wasn't enough storage. I could unpause the VM, but in a few seconds, with things writing to the virtual disk, again it was paused with the same out of space message. Vdsm logs showed the enospc return code... so it made sense, it's just that the VM shows plenty of storage there. Once I rebooted the VM, everything went back to normal. So is moving storage for a live VM not supported? I guess we got lucky in our 3.4 system (?)

1 0

Cinder Snapshot Issues
by Kevin Hrpcek 25 May '16

25 May '16

Hello, I'm running into a problem with live snapshots not working when using cinder/ceph disks. There are different failures for including and not including memory, but in each case cinder/ceph creates a new snapshot that can be seen in cinder and ceph. When doing a memory/disk snapshot the VM ends up in a paused state and I need to kill -9 the qemu process to be able to boot the vm again. The engine seems to be losing connection with the vdsm process on the VM host after freezing the guest's filesystems. The guest never receives the thaw command and it fails in the logs. I am pasting in some log snippets. 2016-04-12 19:24:58,851 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-27) [5c4493e] Ending command 'org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand' successfully. 2016-04-12 19:27:56,873 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-27) [4d97ca06] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM OVCL1A command failed: Message timeout which can be caused by communication issues 2016-04-12 19:27:56,873 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler_Worker-27) [4d97ca06] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand' return value 'StatusOnlyReturnForXmlRpc [status=StatusForXmlRpc [code=5022, message=Message timeout which can be caused by communication issues]]' 2016-04-12 19:27:56,874 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler_Worker-27) [4d97ca06] HostName = OVCL1A 2016-04-12 19:27:56,874 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler_Worker-27) [4d97ca06] Command 'SnapshotVDSCommand(HostName = OVCL1A, SnapshotVDSCommandParameters:{runAsync='true', hostId='9bdfaedc-34a8-4a08-ad8a-c117835a6094', vmId='040609f6-cfe0-4763-8b32-08ffad158c93'})' execution failed: VDSGenericException: VDSNetworkException: Message timeout which can be caused by communication issues 2016-04-12 19:27:56,875 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (org.ovirt.thread.pool-8-thread-16) [4d97ca06] Host 'OVCL1A' is not responding. Disk only live snapshots freeze the guest file systems, the vm receives the thaw command, but the VM is no longer responsive. The VM pings on the network but it is hung and it also needs a kill -9 to the qemu process so that it can be booted again. jsonrpc.Executor/0::DEBUG::2016-04-12 19:41:58,342::__init__::503::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'VM.snapshot' in bridge with {u'frozen': True, u'vmID': u'040609f6-cfe0-4763-8b32-08ffad158c93', u'snapDrives': []} jsonrpc.Executor/0::INFO::2016-04-12 19:41:58,343::vm::3237::virt.vm::(snapshot) vmId=`040609f6-cfe0-4763-8b32-08ffad158c93`::<domainsnapshot> <disks/> </domainsnapshot> jsonrpc.Executor/0::ERROR::2016-04-12 19:41:58,346::vm::3252::virt.vm::(snapshot) vmId=`040609f6-cfe0-4763-8b32-08ffad158c93`::Unable to take snapshot Traceback (most recent call last): File "/usr/share/vdsm/virt/vm.py", line 3250, in snapshot self._dom.snapshotCreateXML(snapxml, snapFlags) File "/usr/share/vdsm/virt/virdomain.py", line 68, in f ret = attr(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 124, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 1313, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 2581, in snapshotCreateXML if ret is None:raise libvirtError('virDomainSnapshotCreateXML() failed', dom=self) libvirtError: unsupported configuration: nothing selected for snapshot jsonrpc.Executor/7::DEBUG::2016-04-12 19:41:58,391::__init__::503::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'VM.thaw' in bridge with {u'vmID': u'040609f6-cfe0-4763-8b32-08ffad158c93'} jsonrpc.Executor/7::INFO::2016-04-12 19:41:58,391::vm::3041::virt.vm::(thaw) vmId=`040609f6-cfe0-4763-8b32-08ffad158c93`::Thawing guest filesystems jsonrpc.Executor/7::INFO::2016-04-12 19:41:58,396::vm::3056::virt.vm::(thaw) vmId=`040609f6-cfe0-4763-8b32-08ffad158c93`::6 guest filesystems thawed Everything else is working well with cinder for running VMs (making disks, running VMs, live migration, etc...). I was able to get live snapshots when using a CephFS Posix storage domain. Versions.. Ceph 9.2.0 oVirt Latest CentOS 7.2 Cinder 7.0.1-1.el7 Any help would be appreciated. Thanks, Kevin

2 4

Re: [ovirt-users] How to setup host network to link ovirtmgmt with eth0 automatically?
by Ondřej Svoboda 25 May '16

25 May '16

This is a multi-part message in MIME format. --------------C1E2D94265E0210FD5646D84 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Kai, The symptoms after removal of vdsm-hook-ovs look just like the ovirtmgmt bridged network was not created. The log to look in would be supervdsm.log, but it looks like yours has been rotated after supervdsmd was restarted (the warning is benign). Can you dig out "supervdsm.log.1"? OVS started to be supported by the hook initially (this was the first attempt at supporting OVS). Currently, proper OVS support is in development and should appear in 4.0 as a tech-preview. Thanks, Ondra (osvoboda(a)redhat.com) On 25.5.2016 11:01, Kai Kang wrote: > > > On Tue, May 24, 2016 at 8:43 PM, Ondřej Svoboda <ondrej(a)svobodasoft.cz > <mailto:ondrej@svobodasoft.cz>> wrote: > > Hi again, (correcting myself a bit) > > are using the Open vSwitch hook intentionally? If not, you can > |yum remove vdsm-hook-ovs| for a while. What is your exact VDSM > version? > > > My VDSM version is 4.17.24 and ovirt-engine is 3.6.4. When after > remove ovs hooks, it still fails with: > > "Host node3 does not comply with the cluster Default networks, the > following networks are missing on host: 'ovirtmgmt'". > > I checked vdsm.log it seems no erros there. And in supervdsm.log, it > shows warnings: > > sourceRoute::INFO::2016-05-25 > 07:57:41,779::sourceroutethread::60::root::(process_IN_CLOSE_WRITE_filePath) > interface ovirtmgmt is not a libvirt interface > sourceRoute::WARNING::2016-05-25 > 07:57:41,780::utils::140::root::(rmFile) File: > /var/run/vdsm/trackedInterfaces/ovirtmgmt already removed > > > What should I check next? Thanks. > > I uploaded vdsm.log to: > > https://gist.github.com/parr0tr1ver/1e38171b5d12cf77321101530276d368 > > and supervdsm.log: > > https://gist.github.com/parr0tr1ver/97805698a485f1cd49ded2b095297531 > > > Also, can you give a little more context from your vdsm.log, and > also from supervdsm.log? I think the vdsm.log failure is only > related to stats reporting, and is not the root problem. > > If you don't have any confidential information in the logs (or you > can remove it), I suggest that you open a bug on product=vdsm at > https://bugzilla.redhat.com/ Have no fear about naming the bug, it > can be renamed if necessary. > > > > I find there is a bug on > https://bugzilla.redhat.com/show_bug.cgi?id=1234867. The "Target > Milestone" to "support ovs via vdsm hook" is ovirt-3.6.7. Does that > mean ovs does not work actually in previous versions? > > Thanks a lot. > > --Kai > > > > Thanks, Ondra > >> On 24.5.2016 11:47, Kai Kang wrote: >>> Hi, >>> >>> I checked vdsm.log, it show error: >>> >>> jsonrpc.Executor/0::DEBUG::2016-05-24 >>> 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset >>> --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs >>> (cwd None) >>> jsonrpc.Executor/0::DEBUG::2016-05-24 >>> 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = >>> 'Traceback (most recent call last):\n File >>> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in >>> <module>\n main()\n File >>> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in >>> main\n >>> stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: >>> \'network\'\n\n'; <rc> = 2 >>> jsonrpc.Executor/0::INFO::2016-05-24 >>> 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most >>> recent call last): >>> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line >>> 72, in <module> >>> main() >>> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line >>> 66, in main >>> stats['network'].update(ovs_networks_stats(stats['network'])) >>> KeyError: 'network' >>> >>> >>> I'm checking what wrong with it. >>> >>> Thanks, >>> Kai >>> >>> >>> >>> On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang(a)gmail.com >>> <mailto:kai.7.kang@gmail.com>> wrote: >>> >>> And network configurations on node: >>> >>> [root at ovirt-node] # brctl show >>> bridge name bridge id STP enabled interfaces >>> docker0 8000.0242ae1de711 no >>> ovirtmgmt 8000.001320ff73aa no eth0 >>> >>> [root at ovirt-node] # ifconfig -a >>> docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11 >>> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 >>> UP BROADCAST MULTICAST MTU:1500 Metric:1 >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:2866 errors:0 dropped:0 overruns:0 >>> carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:762182 (744.3 KiB) TX bytes:210611 >>> (205.6 KiB) >>> Interrupt:20 Memory:d1100000-d1120000 >>> >>> lo Link encap:Local Loopback >>> inet addr:127.0.0.1 Mask:255.0.0.0 >>> inet6 addr: ::1/128 Scope:Host >>> UP LOOPBACK RUNNING MTU:65536 Metric:1 >>> RX packets:36 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB) >>> >>> ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa >>> inet addr:128.224.165.170 Bcast:128.224.165.255 >>> Mask:255.255.255.0 >>> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link >>> inet6 addr: >>> 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0 >>> TX packets:2831 errors:0 dropped:0 overruns:0 >>> carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:644421 (629.3 KiB) TX bytes:177616 >>> (173.4 KiB) >>> >>> sit0 Link encap:UNSPEC HWaddr >>> 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00 >>> NOARP MTU:1480 Metric:1 >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf >>> BROADCAST MULTICAST MTU:1500 Metric:1 >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> >>> Thanks, >>> Kai >>> >>> >>> >>> On Tue, May 24, 2016 at 3:36 PM, Kai Kang >>> <kai.7.kang(a)gmail.com <mailto:kai.7.kang@gmail.com>> wrote: >>> >>> Hi, >>> >>> When I install a host, it fails with: >>> >>> 2016-05-24 07:00:01,749 ERROR >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] >>> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host >>> 'node3' is set to Non-Operational, it is missing the >>> following networks: 'ovirtmgmt' >>> 2016-05-24 07:00:01,781 WARN >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation >>> ID: 1bf36cd4, Job ID: >>> db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, >>> Custom Event ID: -1, Message: Host node3 does not comply >>> with the cluster Default networks, the following >>> networks are missing on host: 'ovirtmgmt' >>> >>> After I click the "Hosts" -> subtab "Network Interfaces" >>> -> "Setup Host Networks" on the web ui and drag >>> ovirtmgmt to "Assigned Logical" to link with eth0, then >>> activate host "node3" successfully. >>> >>> My question is how to make such manual operation >>> automatically? Then I can run some automatic tests. >>> >>> Thanks a lot. >>> >>> --Kai >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> >>> http://lists.ovirt.org/mailman/listinfo/users >> > > --------------C1E2D94265E0210FD5646D84 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Kai,<br> <br> The symptoms after removal of vdsm-hook-ovs look just like the ovirtmgmt bridged network was not created. The log to look in would be supervdsm.log, but it looks like yours has been rotated after supervdsmd was restarted (the warning is benign). Can you dig out "supervdsm.log.1"?<br> <br> OVS started to be supported by the hook initially (this was the first attempt at supporting OVS). Currently, proper OVS support is in development and should appear in 4.0 as a tech-preview.<br> <br> Thanks,<br> Ondra (<a class="moz-txt-link-abbreviated" href="mailto:osvoboda@redhat.com">osvoboda(a)redhat.com</a>)<br> <br> </p> <div class="moz-cite-prefix">On 25.5.2016 11:01, Kai Kang wrote:<br> </div> <blockquote cite="mid:CADC9KmpRk=ZhEt==Q5nWaKGdS-NGbibCJmSp01CbK1Cx=utP0w@mail.gmail.com" type="cite"> <div dir="ltr"><br> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 8:43 PM, Ondřej Svoboda <span dir="ltr"><<a moz-do-not-send="true" href="mailto:ondrej@svobodasoft.cz" target="_blank"><a class="moz-txt-link-abbreviated" href="mailto:ondrej@svobodasoft.cz">ondrej(a)svobodasoft.cz</a></a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex"> <div text="#000000" bgcolor="#FFFFFF"> Hi again, (correcting myself a bit)<br> <br> are using the Open vSwitch hook intentionally? If not, you can <code>yum remove vdsm-hook-ovs</code> for a while. What is your exact VDSM version?<br> </div> </blockquote> <div><br> </div> <div>My VDSM version is 4.17.24 and ovirt-engine is 3.6.4. When after remove ovs hooks, it still fails with:</div> <div><br> </div> <div> "Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'".</div> <div><br> </div> <div>I checked vdsm.log it seems no erros there. And in supervdsm.log, it shows warnings:</div> <div><br> </div> <div> <div>sourceRoute::INFO::2016-05-25 07:57:41,779::sourceroutethread::60::root::(process_IN_CLOSE_WRITE_filePath) interface ovirtmgmt is not a libvirt interface</div> <div>sourceRoute::WARNING::2016-05-25 07:57:41,780::utils::140::root::(rmFile) File: /var/run/vdsm/trackedInterfaces/ovirtmgmt already removed</div> </div> <div><br> </div> <div><br> </div> <div>What should I check next? Thanks.</div> <div><br> </div> <div>I uploaded vdsm.log to:</div> <div><br> </div> <div><a moz-do-not-send="true" href="https://gist.github.com/parr0tr1ver/1e38171b5d12cf77321101530276d368">https://gist.github.com/parr0tr1ver/1e38171b5d12cf77321101530276d368</a><br> </div> <div><br> </div> <div>and supervdsm.log:</div> <div><br> </div> <div><a moz-do-not-send="true" href="https://gist.github.com/parr0tr1ver/97805698a485f1cd49ded2b095297531">https://gist.github.com/parr0tr1ver/97805698a485f1cd49ded2b095297531</a><br> </div> <div> </div> <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex"> <div text="#000000" bgcolor="#FFFFFF"> <br> Also, can you give a little more context from your vdsm.log, and also from supervdsm.log? I think the vdsm.log failure is only related to stats reporting, and is not the root problem.<br> <br> If you don't have any confidential information in the logs (or you can remove it), I suggest that you open a bug on product=vdsm at <a moz-do-not-send="true" href="https://bugzilla.redhat.com/" target="_blank">https://bugzilla.redhat.com/</a> Have no fear about naming the bug, it can be renamed if necessary.</div> </blockquote> <div><br> </div> <div><br> </div> <div>I find there is a bug on <a moz-do-not-send="true" href="https://bugzilla.redhat.com/show_bug.cgi?id=1234867">https://bugzilla.redhat.com/show_bug.cgi?id=1234867</a>. The "Target Milestone" to <span class="" style="white-space:pre">"support ovs via vdsm hook" is </span>ovirt-3.6.7. Does that mean ovs does not work actually in previous versions?</div> <div><br> </div> <div>Thanks a lot.</div> <div><br> </div> <div>--Kai</div> <div> </div> <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex"> <div text="#000000" bgcolor="#FFFFFF"> <div> <div class="h5"><br> <br> Thanks, Ondra<br> <blockquote type="cite"> </blockquote> <br> <blockquote type="cite"> <div>On 24.5.2016 11:47, Kai Kang wrote:<br> </div> <blockquote type="cite"> <div dir="ltr">Hi, <div><br> </div> <div>I checked vdsm.log, it show error:</div> <div><br> </div> <div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)</div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2</div> <div>jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last):</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module></div> <div> main()</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main</div> <div> stats['network'].update(ovs_networks_stats(stats['network']))</div> <div>KeyError: 'network'</div> </div> <div><br> </div> <div><br> </div> <div>I'm checking what wrong with it.</div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:57 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" href="mailto:kai.7.kang@gmail.com" target="_blank"><a class="moz-txt-link-abbreviated" href="mailto:kai.7.kang@gmail.com">kai.7.kang(a)gmail.com</a></a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex"> <div dir="ltr">And network configurations on node: <div><br> </div> <div>[root at ovirt-node] # brctl show<br> </div> <div>bridge name bridge id STP enabled interfaces</div> <div>docker0 8000.0242ae1de711 no</div> <div>ovirtmgmt 8000.001320ff73aa no eth0</div> <div><br> </div> <div>[root at ovirt-node] # ifconfig -a<br> </div> <div> <div>docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11</div> <div> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0</div> <div> UP BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)</div> <div> Interrupt:20 Memory:d1100000-d1120000</div> <div><br> </div> <div>lo Link encap:Local Loopback</div> <div> inet addr:127.0.0.1 Mask:255.0.0.0</div> <div> inet6 addr: ::1/128 Scope:Host</div> <div> UP LOOPBACK RUNNING MTU:65536 Metric:1</div> <div> RX packets:36 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)</div> <div><br> </div> <div>ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0</div> <div> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link</div> <div> inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0</div> <div> TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)</div> <div><br> </div> <div>sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00</div> <div> NOARP MTU:1480 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf</div> <div> BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> </div> <div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> </div> <div><br> </div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div> <div> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:36 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" href="mailto:kai.7.kang@gmail.com" target="_blank"><a class="moz-txt-link-abbreviated" href="mailto:kai.7.kang@gmail.com">kai.7.kang(a)gmail.com</a></a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex"> <div dir="ltr">Hi, <div><br> </div> <div>When I install a host, it fails with:</div> <div><br> </div> <div> <div>2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt'</div> <div>2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'</div> </div> <div><br> </div> <div>After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.</div> <div><br> </div> <div>My question is how to make such manual operation automatically? Then I can run some automatic tests.</div> <div><br> </div> <div>Thanks a lot.</div> <span><font color="#888888"> <div><br> </div> <div>--Kai</div> </font></span></div> </blockquote> </div> <br> </div> </div> </div> </blockquote> </div> <br> </div> <br> <fieldset></fieldset> <br> <pre>_______________________________________________ Users mailing list <a moz-do-not-send="true" href="mailto:Users@ovirt.org" target="_blank">Users(a)ovirt.org</a> <a moz-do-not-send="true" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> <br> </blockquote> <br> </div> </div> </div> </blockquote> </div> <br> </div> </div> </blockquote> <br> </body> </html> --------------C1E2D94265E0210FD5646D84--

1 0

add user permissions to a template
by Nathanaël Blanchet 25 May '16

25 May '16

Hi all, I don't want to add permission to manage a template, but I want to set permission to this template so as to each new vm created from this template inherits of the same permissions. Many thanks. -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 1

[ANN] oVirt 3.6.7 First Release Candidate is now available for testing
by Sandro Bonazzola 25 May '16

25 May '16

The oVirt Project is pleased to announce the availability of the First Release Candidate of oVirt 3.6.7 for testing, as of May 25th, 2016 This release is available now for: * Fedora 22 * Red Hat Enterprise Linux 6.7 or later * CentOS Linux (or similar) 6.7 or later * Red Hat Enterprise Linux 7.2 or later * CentOS Linux (or similar) 7.2 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.2 or later * CentOS Linux (or similar) 7.2 or later * Fedora 22 This release candidate includes the following updated packages: * ovirt-engine * ovirt-hosted-engine-setup * ovirt-hosted-engine-ha * vdsm See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: * A new oVirt Live ISO will be available soon [2]. * A new oVirt Node Next Install ISO will be available soon[3] * Mirrors[4] might need up to one day to synchronize. Additional Resources: * Read more about the oVirt 3.6.7 release highlights: http://www.ovirt.org/release/3.6.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/3.6.7/ [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-live/ [3] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-node-ng-installer/ [4] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Cannot sync networks
by Roderick Mooi 24 May '16

24 May '16

Good day On oVirt 3.6.4 HE. I manually reconfigured host networks by doing the following: 1. Changed to global maintenance mode 2. Shutdown the hosted engine 3. on each host: a. systemctl stop ovirt-ha-agent && systemctl stop ovirt-ha-broker && systemctl stop vdsmd b. updated /var/lib/vdsm/persistence/netconf/nets to match the required config c. updated ifcfg files to match d. rebooted each host 4. When all is up and running again, verified network connectivity and settings on each host - ok. 5. Logged into engine web UI - all hosts detected but show network out-of-sync (see attached example). 6. Individual sync / sync all networks runs for a while till login time out. Log back in and go to host - still shows out-of-sync (even next day or after rebooting again). 7. Eventually got one host to sync (not hosting any VMs and rebooted). 8. Whatever I try cannot get the other hosts to sync (even when moving all VMs off and rebooting). Any ideas? Do I have to manually edit the database and change the network settings for the DC - if so, how do I do this? (the host config is what I want - DC is old config.) Alternatively, if I have to start all over again, what is the correct way for changing networks post HE install (I need this as the network for installation and testing looks different to the final production network)? Thanks very much, Roderick

2 4

How to change host networks?
by Roderick Mooi 24 May '16

24 May '16

Good day I would like to change the IP addresses of the host networks used by Ovirt including the ovirtmgmt bridge. I need to move them to a different subnet post installation. What is the best/safest way to do this? Thanks, Roderick Mooi Senior Engineer: South African National Research Network (SANReN) Meraka Institute, CSIR roderick(a)sanren.ac.za | +27 12 841 4111 | www.sanren.ac.za

2 3