- Users - oVirt List Archives

integrate iSCSI and FC on the same oVirt datacenter
by Kapetanakis Giannis 20 Oct '15

20 Oct '15

Hi, Not sure if this is the right place to ask but maybe someone can provide directions for my problem. I have a full FC setup with FC switch and FC HBAs on Linux (Centos) to access my storage. However we cannot afford expanding our FC infrastructure thus making it hard for us to add more nodes in the oVirt setup. FCoE requires compatible switches and adapters (correct?) which is also out of budget. Our storage supports only FC. I thought something like this might work: node[1]: FC - ISCSI <-> node[2]: ISCSI - FC share the FC block device over iscsi and then create a new FC target+initiator on the new node with same FC lun as the original? Could this work? How? Other ideas? regards, Giannis ps. a) a solution would also be to migrate completely to iSCSI but I'm trying to avoid that atm. b) another one would be to create a second datacenter for iSCSI but also trying to avoid that if I can

3 7

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 20 Oct '15

20 Oct '15

------=_Part_258573_264923491.1445347258533 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi Salifou, OK, i see now, then you have two options: a) To extend the sdk: 1. extend java-sdk by allowing to inject custom headers in every request=C2= =A0(not trivial as all ovirt SDKs are auto-generated,but if its common case= , you may find yourself getting help from community/maintainers) 2. fork java-sdk customizing it for your needs I'd recommend the former as fork will leave you with no support/maintenance= from community plus you'll haveto implement new=C2=A0features by your own = (what will become a moving target very quickly)=20 b) Proxying the sdk You can implement dynamic proxy wrapping SDK's HttpProxy.java#execute and i= ntercept the context from there,but you've to stay tuned as backward compat= ibility is for interface and not for SDK internals,so "potentially" you can= find your code broken in one of the following upgrades hope it helps.=C2=A0 On Monday, October 19, 2015 6:05 PM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, Thanks for replying. Unfortunately the headers are dynamic ... Here is the story: We implemented a custom RHEV-M AAA module for a client in order to allow their custom portal to make RHEV-M API=20 calls.=20 The custom AAA module requires extra dynamic data in the HTTP=20 request (as request headers for now but request parameters=20 should be fine too).=20 Their is no problem if they go with the REST API, I am just=20 trying to anticipate/identify potential integration problem ... It seems like they will have to use the REST API or modify the=20 java sdk ...=C2=A0=20 Thanks a lot, Salifou ----- Original Message ----- From: "Michael Pasternak" <mishka8520(a)yahoo.com> To: "Salifou Sidi M. Malick" <ssidimah(a)redhat.com> Cc: "Users" <users(a)ovirt.org> Sent: Sunday, October 18, 2015 5:45:05 AM Subject: Re: Question about the ovirt-engine-sdk-java Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 =C2=A0 =C2=A0 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <= ssidimah(a)redhat.com> wrote: =C2=A0=20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_258573_264923491.1445347258533 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yiv936631= 0362"><div id=3D"yui_3_16_0_1_1445338067930_7276"><div style=3D"color:#000;= background-color:#fff;font-family:HelveticaNeue-Light, Helvetica Neue Light= , Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:13p= x;" id=3D"yui_3_16_0_1_1445338067930_7275"><div dir=3D"ltr" id=3D"yiv936631= 0362yui_3_16_0_1_1445338067930_4283"><span class=3D"yiv9366310362" id=3D"yi= v9366310362yui_3_16_0_1_1445338067930_4296" style=3D"font-family:'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;">Hi Sali= fou,</span><span></span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_= 0_1_1445338067930_4283"><span class=3D"yiv9366310362" style=3D"font-family:= 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif= ;"><br clear=3D"none"></span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_= 3_16_0_1_1445338067930_4283"><span class=3D"yiv9366310362" id=3D"yiv9366310= 362yui_3_16_0_1_1445338067930_4547" style=3D"font-family:'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;">OK, i see now, = then you have two options:</span></div><div dir=3D"ltr" id=3D"yiv9366310362= yui_3_16_0_1_1445338067930_4283"><span class=3D"yiv9366310362" style=3D"fon= t-family:'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', s= ans-serif;"><br clear=3D"none"></span></div><div dir=3D"ltr" id=3D"yiv93663= 10362yui_3_16_0_1_1445338067930_4283"><span class=3D"yiv9366310362" style= =3D"font-family:'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Gra= nde', sans-serif;" id=3D"yui_3_16_0_1_1445338067930_7286">a) To extend the = sdk:</span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_144533806= 7930_4283"><span class=3D"yiv9366310362" style=3D"font-family:'Helvetica Ne= ue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;"><br clear= =3D"none"></span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_144= 5338067930_4283"><span class=3D"yiv9366310362" id=3D"yiv9366310362yui_3_16_= 0_1_1445338067930_4800" style=3D"font-family:'Helvetica Neue', 'Segoe UI', = Helvetica, Arial, 'Lucida Grande', sans-serif;">1. extend java-sdk by allow= ing to inject custom headers in every request</span><span class=3D"yiv93663= 10362" style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial= , 'Lucida Grande', sans-serif;"> </span><span id=3D"yui_3_16_0_1_14453= 38067930_8082" class=3D"" style=3D"font-family: 'Helvetica Neue', 'Segoe UI= ', Helvetica, Arial, 'Lucida Grande', sans-serif;">(not trivial as all ovir= t SDKs are auto-generated</span><span style=3D"font-family: 'Helvetica Neue= ', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;">,</span></di= v><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4283"><spa= n style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lu= cida Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445338067930_9090= ">but if its common case, you may find yourself getting help from community= /maintainers)</span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_= 1445338067930_4283"><span style=3D"font-family: 'Helvetica Neue', 'Segoe UI= ', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br></span></= div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4283"><s= pan class=3D"yiv9366310362" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4= 801" style=3D"font-family:'Helvetica Neue', 'Segoe UI', Helvetica, Arial, '= Lucida Grande', sans-serif;">2. fork java-sdk customizing it for your needs= </span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930= _4283"><span class=3D"yiv9366310362" style=3D"font-family:'Helvetica Neue',= 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;"><br clear=3D"n= one"></span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_14453380= 67930_4283"><span class=3D"yiv9366310362" id=3D"yiv9366310362yui_3_16_0_1_1= 445338067930_4974" style=3D"font-family:'Helvetica Neue', 'Segoe UI', Helve= tica, Arial, 'Lucida Grande', sans-serif;">I'd recommend the former as fork= will leave you with no support/maintenance from community plus you'll have= </span></div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930= _4283"><span class=3D"yiv9366310362" style=3D"font-family:'Helvetica Neue',= 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16= _0_1_1445338067930_7285">to implement new </span><span id=3D"yiv936631= 0362yui_3_16_0_1_1445338067930_5162" style=3D"font-family:'Helvetica Neue',= 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;">features by yo= ur own (what will become a moving target very quickly)</span></div> <br cl= ear=3D"none"><div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1= 445338067930_7274" dir=3D"ltr">b) Proxying the sdk</div><div class=3D"yiv93= 66310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"ltr"><= br></div><div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_14453= 38067930_7274" dir=3D"ltr">You can implement dynamic proxy wrapping SDK's H= ttpProxy.java#execute and intercept the context from there,</div><div class= =3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir= =3D"ltr">but you've to stay tuned as backward compatibility is for interfac= e and not for SDK internals,</div><div class=3D"yiv9366310362qtdSeparateBR"= id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"ltr">so "potentially" you ca= n find your code broken in one of the following upgrades</div><div class=3D= "yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"= ltr"><br></div><div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1= _1445338067930_7274" dir=3D"ltr">hope it helps. <br clear=3D"none"><br= clear=3D"none"></div><div class=3D"yiv9366310362yqt0562777282" id=3D"yiv93= 66310362yqt81591"></div></div></div></div><div class=3D".yiv9366310362yahoo= _quoted" id=3D"yui_3_16_0_1_1445338067930_8533"> <div style=3D"font-family:= HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial= , Lucida Grande, sans-serif;font-size:13px;" id=3D"yui_3_16_0_1_14453380679= 30_8532"> <div style=3D"font-family:HelveticaNeue, Helvetica Neue, Helvetic= a, Arial, Lucida Grande, sans-serif;font-size:16px;" id=3D"yui_3_16_0_1_144= 5338067930_8531"> <div dir=3D"ltr" id=3D"yui_3_16_0_1_1445338067930_8554"> = <font size=3D"2" face=3D"Arial" id=3D"yui_3_16_0_1_1445338067930_8559"> On = Monday, October 19, 2015 6:05 PM, Salifou Sidi M. Malick <ssidimah@redha= t.com> wrote:<br clear=3D"none"> </font> </div> <br clear=3D"none"><br = clear=3D"none"> <div class=3D"yiv9366310362y_msg_container" id=3D"yui_3_16_= 0_1_1445338067930_8712">Hi Micheal,<br clear=3D"none"><br clear=3D"none">Th= anks for replying. Unfortunately the headers are dynamic ...<br clear=3D"no= ne"><br clear=3D"none">Here is the story:<br clear=3D"none"><br clear=3D"no= ne">We implemented a custom RHEV-M AAA module for a client<br clear=3D"none= ">in order to allow their custom portal to make RHEV-M API <br clear=3D"non= e">calls. <br clear=3D"none"><br clear=3D"none">The custom AAA module requi= res extra dynamic data in the HTTP <br clear=3D"none">request (as request h= eaders for now but request parameters <br clear=3D"none">should be fine too= ). <br clear=3D"none"><br clear=3D"none">Their is no problem if they go wit= h the REST API, I am just <br clear=3D"none">trying to anticipate/identify = potential integration problem ...<br clear=3D"none"><br clear=3D"none">It s= eems like they will have to use the REST API or modify the <br clear=3D"non= e">java sdk ...  <br clear=3D"none"><br clear=3D"none">Thanks a lot,<b= r clear=3D"none">Salifou<br clear=3D"none"><br clear=3D"none"><div class=3D= "yiv9366310362yqt8023103542" id=3D"yiv9366310362yqtfd83808"><br clear=3D"no= ne">----- Original Message -----<br clear=3D"none">From: "Michael Pasternak= " <<a rel=3D"nofollow" shape=3D"rect" ymailto=3D"mailto:mishka8520@yahoo= .com" target=3D"_blank" href=3D"mailto:mishka8520@yahoo.com">mishka8520@yah= oo.com</a>><br clear=3D"none">To: "Salifou Sidi M. Malick" <<a rel=3D= "nofollow" shape=3D"rect" ymailto=3D"mailto:ssidimah@redhat.com" target=3D"= _blank" href=3D"mailto:ssidimah@redhat.com">ssidimah(a)redhat.com</a>><br = clear=3D"none">Cc: "Users" <<a rel=3D"nofollow" shape=3D"rect" ymailto= =3D"mailto:users@ovirt.org" target=3D"_blank" href=3D"mailto:users@ovirt.or= g">users(a)ovirt.org</a>><br clear=3D"none">Sent: Sunday, October 18, 2015= 5:45:05 AM<br clear=3D"none">Subject: Re: Question about the ovirt-engine-= sdk-java<br clear=3D"none"><br clear=3D"none">Hi Salifou,<br clear=3D"= none">Actually java sdk is intentionally hiding transport level i= nternals so developers could stay in java domain,if your headers are static= , easiest way would be using reverse proxy in a middle to intercept request= s, <br clear=3D"none"><br clear=3D"none">can you tell me why do you ne= ed this?<br clear=3D"none"> <br clear=3D"none"><br clear=3D"none"><br clear= =3D"none">    On Friday, October 16, 2015 1:14 AM, Salifou Sidi = M. Malick <<a rel=3D"nofollow" shape=3D"rect" ymailto=3D"mailto:ssidimah= @redhat.com" target=3D"_blank" href=3D"mailto:ssidimah@redhat.com">ssidimah= @redhat.com</a>> wrote:<br clear=3D"none">  <br clear=3D"none"><br= clear=3D"none"> Hi Micheal,<br clear=3D"none"><br clear=3D"none">I have a = question about the ovirt-engine-sdk-java.<br clear=3D"none"><br clear=3D"no= ne">Is there a way to add custom request headers to each RHEVM API call?<br= clear=3D"none"><br clear=3D"none">Here is an example of a request that I w= ould like to do:<br clear=3D"none"><br clear=3D"none">$ curl -v -k \<br cle= ar=3D"none">          -H "ID: <a rel=3D"nofollow" = shape=3D"rect" ymailto=3D"mailto:user1@ad.xyz.com" target=3D"_blank" href= =3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br clear=3D"none">&nbs= p;         -H "PASSWORD: Pwssd" \<br clear=3D"none">&nb= sp;         -H "TARGET: kobe" \<br clear=3D"none">&nbsp= ;         <a rel=3D"nofollow" shape=3D"rect" target=3D"= _blank" href=3D"https://vm0.smalick.com/api/hosts">https://vm0.smalick.com/= api/hosts</a><br clear=3D"none"><br clear=3D"none"><br clear=3D"none">I wou= ld like to add ID, PASSWORD and TARGET as HTTP request header. <br clear=3D= "none"><br clear=3D"none">Thanks,<br clear=3D"none">Salifou<br clear=3D"non= e"><br clear=3D"none"><br clear=3D"none"></div><br clear=3D"none"><br clear= =3D"none"></div> </div> </div> </div></div></body></html> ------=_Part_258573_264923491.1445347258533--

1 0

just joined the list
by Johan Vermeulen 20 Oct '15

20 Oct '15

Hello All, I just joined the list and I can't wait to get " acquainted" with Ovirt I have about 150 people for who I have to provide a workstation, Internet access and accounts, and solve all their problems. About 40 work on laptops, the others use disk-less thin clients and ltsp. I hope to replace the ltps-part with Ovirt and Spice. The users are dispersed over some 15 locations. The entire setup runs on Centos. So far I've been looking at the Quick Start Guide, and got as far as setting up nfs. One thing would help a lot in this testing fase: I've set up the Ovirt-engine in Virtualbox. Is it also possible to configure and attach a ( Centos) host in Virtualbox? Greetings, J.

5 6

Creating a Instance
by Budur Nagaraju 18 Oct '15

18 Oct '15

HI , While a deploying a vm from the template ,its taking minimum 15 minutes is there any ways to solve the issues ? Thanks, Nagaraju

2 5

This VM is not managed by the engine
by Jaret Garcia 18 Oct '15

18 Oct '15

--=_223255a2b9290ae41a14342812244984 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi everyone,=0A=0AAfew weeks ago we had a problem with the SPM and all h= ost in the=0Acluster got stocked in contending, we restarted hosts one b= y one, and=0Athe issue was solved. Howerver we didn't notice that one se= rver even=0Ait never stop running, it changed its state some way and the= n no=0Achanges could be done to the VM, we tried to add more RAM and we= saw=0Athe message "Cannot run VM. This VM is not managed by the engine"= , so=0Awe ssh the VM an send it to reboot, and once we did that the VM n= ever=0Acame back, we still see the VM in the engine administration but i= t=0Adoes not show any information regarding to network, disk, and so. We= =0Acreated another VM to replace the services in the one we lost, howeve= r=0Awe need to recover the files in the lost VM, we believe the image=0A= should be in the storage but we haven't found a way to recover it,=0Asom= e time ago we came across a similar situation but at that time it=0Awas= a NFS data domain, so it was easier for us to go inside the=0Astorage s= erver an search for the VM ID to scp the image and mount it=0Asomewhere= else, this time the storage is iscsi and even we found that=0Athe hosts= mount the target in /rhev/data-center/mnt/blockSD/=C2=A0=C2=A0 we=0Aonl= y see there the active images for the cluster, can anyone point us=0Ahow= we can recover the lost image?=C2=A0 We know the VM ID and the Disk ID= =0Afrom Ovirt.=0A=0AOur Setup=0Aovirt version: 3.5.4 hosted engine=0A4 s= upermicro hosts running centos 7.1=0A1 iscsi storage server running Open= -E DSS v7 Lite=0A=0AThanks in advance=0A=0AJaret=0AEmail sent using Pack= et Mail - Email, Groupware and Calendaring for=0Athe cloud! --=_223255a2b9290ae41a14342812244984 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><body style=3D"font-family: Helvetica,Arial,sans-serif; font-size:= 12px;">Hi everyone,<br><br>Afew weeks ago we had a problem with the SPM= and all host in the cluster got stocked in contending, we restarted hos= ts one by one, and the issue was solved. Howerver we didn't notice that= one server even it never stop running, it changed its state some way an= d then no changes could be done to the VM, we tried to add more RAM and= we saw the message "Cannot run VM. This VM is not managed by the engine= ", so we ssh the VM an send it to reboot, and once we did that the VM ne= ver came back, we still see the VM in the engine administration but it d= oes not show any information regarding to network, disk, and so. We crea= ted another VM to replace the services in the one we lost, however we ne= ed to recover the files in the lost VM, we believe the image should be i= n the storage but we haven't found a way to recover it, some time ago we= came across a similar situation but at that time it was a NFS data doma= in, so it was easier for us to go inside the storage server an search fo= r the VM ID to scp the image and mount it somewhere else, this time the= storage is iscsi and even we found that the hosts mount the target in /= rhev/data-center/mnt/blockSD/=C2=A0=C2=A0 we only see there the active i= mages for the cluster, can anyone point us how we can recover the lost i= mage?=C2=A0 We know the VM ID and the Disk ID from Ovirt.<br><br>Our Set= up<br>ovirt version: 3.5.4 hosted engine<br>4 supermicro hosts running c= entos 7.1<br>1 iscsi storage server running Open-E DSS v7 Lite<br><br>Th= anks in advance<br><br>Jaret<br>Email sent using Packet Mail - Email, Gr= oupware and Calendaring for the cloud!</body></html> --=_223255a2b9290ae41a14342812244984--

3 3

Ha cluster 3 nodes but 1 slow
by Nicolas LIENARD 18 Oct '15

18 Oct '15

------LR35WVKSJTP2ZE0S9J713PVY1DHYNC Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Hi Currently, i ve 3 nodes, 2 in same DC and a third in another DC. They are all bridged together through a vpn. I know a cluster is at least 3 nodes to satisfy the quorum. My question is to know if i can have my VM balancing on the 2 fast nodes with HA and glusterfs replica 2. And use the slow third node to satisfy quorum and a gluster geo-replication to act as a Backup. Let me know if this is technically suitable with Ovirt. Thanks a lot Regards Nico ------LR35WVKSJTP2ZE0S9J713PVY1DHYNC Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit Hi<br> <br> Currently, i ve 3 nodes, 2 in same DC and a third in another DC. <br> <br> They are all bridged together through a vpn. <br> <br> I know a cluster is at least 3 nodes to satisfy the quorum. <br> <br> My question is to know if i can have my VM balancing on the 2 fast nodes with HA and glusterfs replica 2.<br> <br> And use the slow third node to satisfy quorum and a gluster geo-replication to act as a Backup.<br> <br> Let me know if this is technically suitable with Ovirt.<br> <br> Thanks a lot <br> Regards <br> Nico ------LR35WVKSJTP2ZE0S9J713PVY1DHYNC--

4 4

how to remove orphaned image
by Jiří Sléžka 16 Oct '15

16 Oct '15

This is a cryptographically signed message in MIME format. --------------ms000507050905000209040402 Content-Type: multipart/mixed; boundary="------------050403050401030004020607" This is a multi-part message in MIME format. --------------050403050401030004020607 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable Hello, I have some orphaned images on a storage domain which are not visible=20 from manager and I would like to remove them. I found one proposed feature which would be useful but seems not exists=20 yet - http://www.ovirt.org/Features/Orphaned_Images Also I found this feature http://www.ovirt.org/Features/Domain_Scan but=20 there is no documentation how to use it. Could you suggest me safe manual steps to remove an orphaned image? btw. I know all info about this image - sdUUID, spUUID, imgUUID,=20 volUUID, volume path, logical volume on which is stored,... I am using=20 oVirt3.5.4 Thanks in advance, Jiri Slezka --------------050403050401030004020607 Content-Type: text/x-vcard; charset=utf-8; name="jiri_slezka.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="jiri_slezka.vcf" begin:vcard fn;quoted-printable:Ing. Ji=3DC5=3D99=3DC3=3DAD Sl=3DC3=3DA9=3DC5=3DBEka n;quoted-printable;quoted-printable:Sl=3DC3=3DA9=3DC5=3DBEka;Ji=3DC5=3D99= =3DC3=3DAD org;quoted-printable;quoted-printable:Slezsk=3DC3=3DA1 univerzita v Opav=3D= C4=3D9B;Centrum informa=3DC4=3D8Dn=3DC3=3DADch technologi=3DC3=3DAD adr;quoted-printable;quoted-printable:Na Rybn=3DC3=3DAD=3DC4=3D8Dku 1;;CI= T, Slezsk=3DC3=3DA1 univerzita v Opav=3DC4=3D9B;Opava;;74601;Czech Republ= ic email;internet:jiri.slezka@slu.cz title;quoted-printable:Spr=3DC3=3DA1vce s=3DC3=3DADt=3DC4=3D9B a aplikac=3D= C3=3DAD tel;work:+420 553 684 696 x-mozilla-html:FALSE url:http://www.slu.cz version:2.1 end:vcard --------------050403050401030004020607-- --------------ms000507050905000209040402 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: Elektronicky podpis S/MIME MIAGCSqGSIb3DQEHAqCAMIACAQExDzANBglghkgBZQMEAgEFADCABgkqhkiG9w0BBwEAAKCC CWcwggScMIIDhKADAgECAhEAuOSLPwlcx/l5IqBlguM0fDANBgkqhkiG9w0BAQUFADA7MQsw CQYDVQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwg Q0EwHhcNMTQxMTEwMDAwMDAwWhcNMTYxMTA5MjM1OTU5WjBlMQswCQYDVQQGEwJDWjElMCMG A1UECgwcU2xlenNrw6EgdW5pdmVyeml0YSB2IE9wYXbEmzEYMBYGA1UEAwwPSmnFmcOtIFNs w6nFvmthMRUwEwYJKoZIhvcNAQkCFgZzbGV6a2EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw ggEKAoIBAQDNcPHUXg4ZfD3shn/1zeMf8tyn/ZplDk1756hc+PVHYNO2VRP2p1HKRdtcfj1i 2V87na0EfMmfxM77dJJklSnAsCXrs0by2eHzdCz746vErs5VkSnZ1nhOWH7FViKadiyxmAv+ zXL+jkzb678GHsT2jPWdHjfhgQXAzd0hE5AqkQ3sRGRspsfruRmfgStEoE2+Ubq4jC69pBYW i80zdAUOc+9Kl5Zfolfo/TpFViXIo4i1FMgDRNYZAhBKpHz70zN/7VUqTl/7x9z3a6ytNC8J TbbMdj8SdWhRV0oyOOhYlFHL+1ZS0KtQ0iz5yWs9dCkq77LrTXCXaWSGBRlQ8H/5AgMBAAGj ggFvMIIBazAfBgNVHSMEGDAWgBRjTUNaGUg/xEbBArq/7g7lgrdmpjAdBgNVHQ4EFgQUNHjX Vei/P0DdklwoP8A3Tkq0XTYwDgYDVR0PAQH/BAQDAgWgMAwGA1UdEwEB/wQCMAAwHQYDVR0l BBYwFAYIKwYBBQUHAwQGCCsGAQUFBwMCMBgGA1UdIAQRMA8wDQYLKwYBBAGyMQECAh0wPwYD VR0fBDgwNjA0oDKgMIYuaHR0cDovL2NybC50Y3MudGVyZW5hLm9yZy9URVJFTkFQZXJzb25h bENBLmNybDByBggrBgEFBQcBAQRmMGQwOgYIKwYBBQUHMAKGLmh0dHA6Ly9jcnQudGNzLnRl cmVuYS5vcmcvVEVSRU5BUGVyc29uYWxDQS5jcnQwJgYIKwYBBQUHMAGGGmh0dHA6Ly9vY3Nw LnRjcy50ZXJlbmEub3JnMB0GA1UdEQQWMBSBEmppcmkuc2xlemthQHNsdS5jejANBgkqhkiG 9w0BAQUFAAOCAQEAJy6bixJ53paigwWwnXfipRly2TTkICwf4PtXw9hOBoYC17PbPpAoGBtT Dvz6pQW4woSJ4JbkkD9JKGPlZXt0fQgZKgbfQ7sRFQ54goOhvJYm+CFJUPiSXrZ/i1CUzI40 U3kXYbWOq99yKid5aUEaIub9E6cJY6fybt7ireTV2IKVNIm/AXWjjf6jxGVavQ1QzTxmRvfE sXpQis5jgCeJjRHhZ4BhwRChkIThLYfWTSYId9rbtuj3yjLjtJipDhHJEuIckgV8sCDbjbyt xo0WNLQmfL0KUVxvpfMfdZ3McGKwn7nQiqBcpsGI3+9pfmHkMzy4+rDGZCHkeyNNxEUpLDCC BMMwggOroAMCAQICEHP+V/rfuMUIgXtmuWvwLe8wDQYJKoZIhvcNAQEFBQAwga4xCzAJBgNV BAYTAlVTMQswCQYDVQQIEwJVVDEXMBUGA1UEBxMOU2FsdCBMYWtlIENpdHkxHjAcBgNVBAoT FVRoZSBVU0VSVFJVU1QgTmV0d29yazEhMB8GA1UECxMYaHR0cDovL3d3dy51c2VydHJ1c3Qu Y29tMTYwNAYDVQQDEy1VVE4tVVNFUkZpcnN0LUNsaWVudCBBdXRoZW50aWNhdGlvbiBhbmQg RW1haWwwHhcNMDkwNTE4MDAwMDAwWhcNMjgxMjMxMjM1OTU5WjA7MQswCQYDVQQGEwJOTDEP MA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EwggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIFdn1M2ojoZANz7sFRMOrH0o1hRohhaBP+PBA4kpD m/5bsbC/tFfcdYBBS2Qa9ttPb4/QJUU1+erLSvr72tPtRYgRlDbkzKgN78U9N+0We+PClZ5Y M38i+/j/7Oa+264KZSUih9pvhItG6ECGKD+/VgjiSumDouki+y36tigfkcHDcftTwCtOpAyh bp1V7ezhJIc6COINHOTETdDLJ/qEZObRl51WJFuTuykuQ+JBaj3iSmX8ml9ahoe8h8d5gJaZ UcaQD2SRmX0Q3awsAyrheGT+zj1O9CtQEUvRWNSbA/B/9TtTsFND+8UvxAQpGjqs11Xp0Q6V 0Tsxf3hPriktAgMBAAGjggFNMIIBSTAfBgNVHSMEGDAWgBSJgmd9xJ0mcABLtFBIfN49rgRu fTAdBgNVHQ4EFgQUY01DWhlIP8RGwQK6v+4O5YK3ZqYwDgYDVR0PAQH/BAQDAgEGMBIGA1Ud EwEB/wQIMAYBAf8CAQAwGAYDVR0gBBEwDzANBgsrBgEEAbIxAQICHTBYBgNVHR8EUTBPME2g S6BJhkdodHRwOi8vY3JsLnVzZXJ0cnVzdC5jb20vVVROLVVTRVJGaXJzdC1DbGllbnRBdXRo ZW50aWNhdGlvbmFuZEVtYWlsLmNybDBvBggrBgEFBQcBAQRjMGEwOAYIKwYBBQUHMAKGLGh0 dHA6Ly9jcnQudXNlcnRydXN0LmNvbS9VVE5BQUFDbGllbnRfQ0EuY3J0MCUGCCsGAQUFBzAB hhlodHRwOi8vb2NzcC51c2VydHJ1c3QuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQAGK6lTLxPc XDkWzIafXkx7cvvsjVWKXpoK/1NMdvQGPVDPV/Ciz6+ZjKr+oBl2PpkDMvp1gziKu2uapQwT stQbduaULmeYWeORbAKQmpzIYEtVq8qIWo0r5WmVAwfR1A78JCIuWbFjpF/t2SNy5JzOOlxs H0+pAMkd/vp/RS22LoTdDyegWRhO1XYlRfSZJnnbb58j90O7Kw8Eo4EmLLd7Nfk9d19AIeZ/ HaWWWr3QyxY6bLthi4r9BDlECsss4cvOLhCYGtvgk+1JZGQIIJ+3o1Dwot3KtMZ8DD3nXhXc J4bkOjtSWherqQZTK50Jc2QcAcP9MNKHA2/kFQN6OV9oMYIDGjCCAxYCAQEwUDA7MQswCQYD VQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EC EQC45Is/CVzH+XkioGWC4zR8MA0GCWCGSAFlAwQCAQUAoIIBmzAYBgkqhkiG9w0BCQMxCwYJ KoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xNTEwMDkwOTQ1MzBaMC8GCSqGSIb3DQEJBDEi BCCYcSUAVFdAShoH0mmivtJN8Z8pW2c+7b2W1UXeTxD46TBfBgkrBgEEAYI3EAQxUjBQMDsx CzAJBgNVBAYTAk5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25h bCBDQQIRALjkiz8JXMf5eSKgZYLjNHwwYQYLKoZIhvcNAQkQAgsxUqBQMDsxCzAJBgNVBAYT Ak5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25hbCBDQQIRALjk iz8JXMf5eSKgZYLjNHwwbAYJKoZIhvcNAQkPMV8wXTALBglghkgBZQMEASowCwYJYIZIAWUD BAECMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggqhkiG9w0DAgIBQDAHBgUrDgMC BzANBggqhkiG9w0DAgIBKDANBgkqhkiG9w0BAQEFAASCAQBeI5MXcqkzETdtdwbgPQ7ZynGY CTIYL/ktD7tSIuXQJ1LpGtruy1wgmk4Pik7iLPS4ZcDfbxkp+QGet258a24rXu4lbgM5oZep E2K+GdNJVuqsMRh+8u9GZw95BigAJpu3N7Zx2WLJyiBc9OIAZof6olE3dlgTTAt9/stlFetW E+Znfm96sBbb9QZ9Sl1ww1IiaXN9dxZ6UvOG8Dz77rF/jkbix1T2nrySWUKahq71wWCqyTD8 jNWV+3fyx1rzRwYtXovH5PnDWQFXx/dK8/OawUzhAN/9HigtWQPX4lGq5bk+5JbjGxznNGPi 2p4SxZFhG8WzsPEPW6axu0b77VqmAAAAAAAA --------------ms000507050905000209040402--

2 3

oVirt - High Availability
by Indunil Jayasooriya 16 Oct '15

16 Oct '15

Hi users, I have setup OVIRT 3.5 with* 2 REDHAT 7.1 hosts.* Everything is ok other than HA ( High Availability). To test HA, Documentation says, *Power Management is needed. * Could you pls let me know if this Power Management is a separate Device or does it come with a BRANDED Server such as HP, IBM or Dell? I have seen a* ILO* port in HP servers. Can I use it for HA ( High Availability) in ovirt? If *power management* is *present in Branded Servers*, Could you pls let me know some *Branded RHEL 7.1/CentOS 7.1 supported servers?* Then, I can use it for Production use. *This is an YOU TUBE video for HA.* https://www.youtube.com/watch?v=uHCnXGUMaS0 Is this a correct video for HA? I did some research. a few URLs. http://lists.ovirt.org/pipermail/users/2013-January/011519.html http://www.ovirt.org/OVirt_Administration_Guide#Host_Resilience https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualiza… *what is **Soft-Fencing Hosts ?* ovirt doc gives below . ( http://www.ovirt.org/OVirt_Administration_Guide#Host_Resilience ) Soft-Fencing Hosts Sometimes a host becomes non-responsive due to an unexpected problem, and though VDSM is unable to respond to requests, the virtual machines that depend upon VDSM remain alive and accessible. In these situations, restarting VDSM returns VDSM to a responsive state and resolves this issue. oVirt 3.3 introduces "soft-fencing over SSH". Prior to oVirt 3.3, non-responsive hosts were fenced only by external fencing devices. In oVirt 3.3, the fencing process has been expanded to include "SSH Soft Fencing", a process whereby oVirt attempts to restart VDSM via SSH on non-responsive hosts. If oVirt fails to restart VDSM via SSH, the responsibility for fencing falls to the external fencing agent if an external fencing agent has been configured. *BUT, It does NOT say how to set it up? * *is there any step by step doc for it? * HOPE TO hear from you? -- cat /etc/motd Thank you Indunil Jayasooriya http://www.theravadanet.net/ http://www.siyabas.lk/sinhala_how_to_install.html - Download Sinhala Fonts

2 4

glusterfsd is not not default enabled after a host installation
by Nathanaël Blanchet 15 Oct '15

15 Oct '15

Hello, I noticed after several different installations that the glusterd daemon was not configured as "systemctl enabled" during a host installation. Is it a known bug? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

3 2

permission
by Budur Nagaraju 15 Oct '15

15 Oct '15

HI I have given permissions "vmcreator and Diskprofileruser" to users ,whenever user remove the vm will the disk get deleted from the storage ? Thanks, Nagaraju

2 1