- Users - oVirt List Archives

Trying hosted-engine on ovirt-3.6 beta
by Joop 03 Sep '15

03 Sep '15

Hi All, I have been trying the above and keep getting an error at the end about unable to write to HEConfImage, see attached log. Host is Fedora22 (clean system), engine is Centos-7.1, followed the readme from the 3.6beta release notes but in short: - setup a nfs server on the fedora22 host - exported /nfs/ovirt-he/data - installed yum, installed the 3.6 beta repo - installed hosted engine - ran setup - installed centos7.1, ran engine-setup Tried with and without selinux/iptables/firewalld. Regards, Joop

3 2

Videoes on 3.6 features
by Eli Mesika 03 Sep '15

03 Sep '15

Hi all The following 3.6 videos on new features were omitted from last Brian P report: oVirt 3.6 power management UI changes : https://www.youtube.com/watch?v=AkfAMpEykdU&html5=1 oVirt 3.6 external status for host & storage domain : https://www.youtube.com/watch?v=xUIbNeN-AxA&html5=1 Thanks Eli Mesika

1 0

ovirt 3.6 Failed to execute stage 'Environment setup'
by Richard Neuboeck 02 Sep '15

02 Sep '15

This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --3W6fXveMv22FLGti6dq6jEIOIdx6nU7sR Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi, I'm trying to test a self hosted engine oVirt 3.6 setup on a CentOS 7.1 minimal installation. But it fails quite early after running hosted-engine --deploy with [ ERROR ] Failed to execute stage 'Environment setup': <Fault 1: "<type 'exceptions.TypeError'>:cannot marshal None unless allow_none is enabled"> So far I've followed the repository installation instructions as mentioned on http://www.ovirt.org/OVirt_3.6_Release_Management, and added the current gluster repo to the default minimal CentOS 7.1 setup. The output of hosted-engine --deploy is as follows: # hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-201508311232= 58-w2syys.log Version: otopi-1.4.0_master (otopi-1.4.0-0.0.master.20150727232243.git04fa8c9.el7) It has been detected that this program is executed through an SSH connection without using screen. Continuing with the installation may lead to broken installation if the network connection fails. It is highly recommended to abort the installation and run it inside a screen session using command "screen". Do you want to continue anyway? (Yes, No)[No]: yes [ INFO ] Hardware supports virtualization [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ ERROR ] Failed to execute stage 'Environment setup': <Fault 1: "<type 'exceptions.TypeError'>:cannot marshal None unless allow_none is enabled"> [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150831123315.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination The VDSM log shows that it fails to run dmidecode to gather hardware information. I've had the same issue with oVirt 3.5 but the access restriction to /dev/mem is kernel imposed so I'm not sure what to make of it since this kernel option is enabled on all the systems I've tested by default. There seem to be some gluster packages missing but I'm guessing that's not the problem at hand. I'm not sure what to search for in the logs so I'm kind of stuck as to what to try next. Any help is greatly appreciated. All the best Richard The rest of the VDSM log during the hosted-engine setup is as follows: BindingXMLRPC::INFO::2015-08-31 12:32:33,395::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47391 Thread-51::INFO::2015-08-31 12:32:33,396::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47391 started Thread-51::INFO::2015-08-31 12:32:33,399::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47391 stopped Reactor thread::INFO::2015-08-31 12:32:48,416::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47392 Reactor thread::DEBUG::2015-08-31 12:32:48,428::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:32:48,429::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47392 Reactor thread::DEBUG::2015-08-31 12:32:48,429::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47392) BindingXMLRPC::INFO::2015-08-31 12:32:48,429::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47392 Thread-52::INFO::2015-08-31 12:32:48,430::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47392 started Thread-52::INFO::2015-08-31 12:32:48,434::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47392 stopped Reactor thread::INFO::2015-08-31 12:33:03,452::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47393 Reactor thread::DEBUG::2015-08-31 12:33:03,464::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:03,465::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47393 Reactor thread::DEBUG::2015-08-31 12:33:03,465::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47393) BindingXMLRPC::INFO::2015-08-31 12:33:03,465::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47393 Thread-53::INFO::2015-08-31 12:33:03,466::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47393 started Thread-53::INFO::2015-08-31 12:33:03,469::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47393 stopped Reactor thread::INFO::2015-08-31 12:33:04,772::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47394 Reactor thread::DEBUG::2015-08-31 12:33:04,783::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:04,783::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47394 Reactor thread::DEBUG::2015-08-31 12:33:04,784::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47394) BindingXMLRPC::INFO::2015-08-31 12:33:04,784::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47394 Thread-54::INFO::2015-08-31 12:33:04,786::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47394 started Thread-54::DEBUG::2015-08-31 12:33:04,787::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-54::ERROR::2015-08-31 12:33:04,791::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-54::DEBUG::2015-08-31 12:33:04,793::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-54::INFO::2015-08-31 12:33:04,795::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47394 stopped Reactor thread::INFO::2015-08-31 12:33:05,798::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47395 Reactor thread::DEBUG::2015-08-31 12:33:05,812::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:05,812::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47395 Reactor thread::DEBUG::2015-08-31 12:33:05,812::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47395) BindingXMLRPC::INFO::2015-08-31 12:33:05,813::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47395 Thread-55::INFO::2015-08-31 12:33:05,814::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47395 started Thread-55::DEBUG::2015-08-31 12:33:05,815::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-55::ERROR::2015-08-31 12:33:05,818::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-55::DEBUG::2015-08-31 12:33:05,818::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-55::INFO::2015-08-31 12:33:05,821::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47395 stopped Reactor thread::INFO::2015-08-31 12:33:06,824::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47396 Reactor thread::DEBUG::2015-08-31 12:33:06,836::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:06,836::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47396 Reactor thread::DEBUG::2015-08-31 12:33:06,837::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47396) BindingXMLRPC::INFO::2015-08-31 12:33:06,837::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47396 Thread-56::INFO::2015-08-31 12:33:06,838::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47396 started Thread-56::DEBUG::2015-08-31 12:33:06,839::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-56::ERROR::2015-08-31 12:33:06,842::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-56::DEBUG::2015-08-31 12:33:06,842::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-56::INFO::2015-08-31 12:33:06,844::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47396 stopped Reactor thread::INFO::2015-08-31 12:33:07,847::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47397 Reactor thread::DEBUG::2015-08-31 12:33:07,859::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:07,859::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47397 Reactor thread::DEBUG::2015-08-31 12:33:07,860::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47397) BindingXMLRPC::INFO::2015-08-31 12:33:07,860::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47397 Thread-57::INFO::2015-08-31 12:33:07,861::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47397 started Thread-57::DEBUG::2015-08-31 12:33:07,862::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-57::ERROR::2015-08-31 12:33:07,865::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-57::DEBUG::2015-08-31 12:33:07,865::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-57::INFO::2015-08-31 12:33:07,867::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47397 stopped Reactor thread::INFO::2015-08-31 12:33:08,870::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47398 Reactor thread::DEBUG::2015-08-31 12:33:08,881::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:08,882::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47398 Reactor thread::DEBUG::2015-08-31 12:33:08,882::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47398) BindingXMLRPC::INFO::2015-08-31 12:33:08,882::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47398 Thread-58::INFO::2015-08-31 12:33:08,884::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47398 started Thread-58::DEBUG::2015-08-31 12:33:08,885::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-58::ERROR::2015-08-31 12:33:08,887::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-58::DEBUG::2015-08-31 12:33:08,888::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-58::INFO::2015-08-31 12:33:08,890::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47398 stopped Reactor thread::INFO::2015-08-31 12:33:09,892::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47399 Reactor thread::DEBUG::2015-08-31 12:33:09,904::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:09,904::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47399 Reactor thread::DEBUG::2015-08-31 12:33:09,905::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47399) BindingXMLRPC::INFO::2015-08-31 12:33:09,905::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47399 Thread-59::INFO::2015-08-31 12:33:09,906::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47399 started Thread-59::DEBUG::2015-08-31 12:33:09,907::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-59::ERROR::2015-08-31 12:33:09,909::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-59::DEBUG::2015-08-31 12:33:09,910::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-59::INFO::2015-08-31 12:33:09,912::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47399 stopped Reactor thread::INFO::2015-08-31 12:33:10,914::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47400 Reactor thread::DEBUG::2015-08-31 12:33:10,926::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:10,926::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47400 Reactor thread::DEBUG::2015-08-31 12:33:10,927::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47400) BindingXMLRPC::INFO::2015-08-31 12:33:10,927::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47400 Thread-60::INFO::2015-08-31 12:33:10,928::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47400 started Thread-60::DEBUG::2015-08-31 12:33:10,929::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-60::ERROR::2015-08-31 12:33:10,931::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-60::DEBUG::2015-08-31 12:33:10,932::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-60::INFO::2015-08-31 12:33:10,934::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47400 stopped Reactor thread::INFO::2015-08-31 12:33:11,936::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47401 Reactor thread::DEBUG::2015-08-31 12:33:11,948::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:11,948::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47401 Reactor thread::DEBUG::2015-08-31 12:33:11,948::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47401) BindingXMLRPC::INFO::2015-08-31 12:33:11,949::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47401 Thread-61::INFO::2015-08-31 12:33:11,949::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47401 started Thread-61::DEBUG::2015-08-31 12:33:11,950::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-61::ERROR::2015-08-31 12:33:11,953::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-61::DEBUG::2015-08-31 12:33:11,954::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-61::INFO::2015-08-31 12:33:11,955::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47401 stopped Reactor thread::INFO::2015-08-31 12:33:12,958::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47402 Reactor thread::DEBUG::2015-08-31 12:33:12,969::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:12,970::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47402 Reactor thread::DEBUG::2015-08-31 12:33:12,970::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47402) BindingXMLRPC::INFO::2015-08-31 12:33:12,970::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47402 Thread-62::INFO::2015-08-31 12:33:12,971::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47402 started Thread-62::DEBUG::2015-08-31 12:33:12,972::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-62::ERROR::2015-08-31 12:33:12,975::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-62::DEBUG::2015-08-31 12:33:12,976::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-62::INFO::2015-08-31 12:33:12,977::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47402 stopped Reactor thread::INFO::2015-08-31 12:33:13,980::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47403 Reactor thread::DEBUG::2015-08-31 12:33:13,991::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:13,992::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47403 Reactor thread::DEBUG::2015-08-31 12:33:13,992::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47403) BindingXMLRPC::INFO::2015-08-31 12:33:13,993::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47403 Thread-63::INFO::2015-08-31 12:33:13,994::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47403 started Thread-63::DEBUG::2015-08-31 12:33:13,995::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getHardwareInfo with () {} Thread-63::ERROR::2015-08-31 12:33:13,998::API::1328::vds::(getHardwareInfo) failed to retrieve hardware info Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1325, in getHardwareInfo hw =3D supervdsm.getProxy().getHardwareInfo() File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ return callMethod() File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> **kwargs) File "<string>", line 2, in getHardwareInfo File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) RuntimeError: [src/dmidecodemodule.c:317] Error decoding DMI data Thread-63::DEBUG::2015-08-31 12:33:13,998::bindingxmlrpc::1263::vds::(wrapper) return getHardwareInfo with {'status': {'message': 'Failed to read hardware information', 'code': 57}} Thread-63::INFO::2015-08-31 12:33:14,000::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47403 stopped Reactor thread::INFO::2015-08-31 12:33:15,042::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47404 Reactor thread::DEBUG::2015-08-31 12:33:15,054::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:15,054::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47404 Reactor thread::DEBUG::2015-08-31 12:33:15,054::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47404) BindingXMLRPC::INFO::2015-08-31 12:33:15,055::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47404 Thread-64::INFO::2015-08-31 12:33:15,056::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47404 started Thread-64::DEBUG::2015-08-31 12:33:15,057::bindingxmlrpc::1256::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-64::DEBUG::2015-08-31 12:33:15,111::utils::661::root::(execCmd) /usr/sbin/tc qdisc show (cwd None) Thread-64::DEBUG::2015-08-31 12:33:15,124::utils::679::root::(execCmd) SUCCESS: <err> =3D ''; <rc> =3D= 0 Thread-64::DEBUG::2015-08-31 12:33:15,127::utils::661::root::(execCmd) /usr/bin/sudo -n /usr/sbin/dmidecode -s system-uuid (cwd None) Thread-64::DEBUG::2015-08-31 12:33:15,153::utils::679::root::(execCmd) FAILED: <err> =3D '/dev/mem: Operation not permitted\n'; <rc> =3D 1 Thread-64::WARNING::2015-08-31 12:33:15,154::utils::812::root::(getHostUUID) Could not find host UUID. Thread-64::DEBUG::2015-08-31 12:33:15,156::caps::780::root::(_getKeyPackages) rpm package ('glusterfs-rdma',) not found Thread-64::DEBUG::2015-08-31 12:33:15,158::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift',) not found Thread-64::DEBUG::2015-08-31 12:33:15,160::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-object',) not found Thread-64::DEBUG::2015-08-31 12:33:15,161::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-plugin',) not found Thread-64::DEBUG::2015-08-31 12:33:15,164::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-account',) not found Thread-64::DEBUG::2015-08-31 12:33:15,164::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-proxy',) not found Thread-64::DEBUG::2015-08-31 12:33:15,165::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-doc',) not found Thread-64::DEBUG::2015-08-31 12:33:15,165::caps::780::root::(_getKeyPackages) rpm package ('gluster-swift-container',) not found Thread-64::DEBUG::2015-08-31 12:33:15,170::bindingxmlrpc::1263::vds::(wrapper) return getCapabilities with {'status': {'message': 'Done', 'code': 0}, 'info': {'HBAInventory': {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:aa2f33e6faca'}], 'FC': []}, 'packages2': {'kernel': {'release': '229.el7.x86_64', 'buildtime': 1425638202.0, 'version': '3.10.0'}, 'glusterfs-fuse': {'release': '1.el7', 'buildtime': 1438093544L, 'version': '3.7.3'}, 'spice-server': {'release': '9.el7', 'buildtime': 1426031557L, 'version': '0.12.4'}, 'librbd1': {'release': '2.el7', 'buildtime': 1425594433L, 'version': '0.80.7'}, 'vdsm': {'release': '0.el7.centos', 'buildtime': 1440055696L, 'version': '4.17.3'}, 'qemu-kvm': {'release': '23.el7_1.6.1', 'buildtime': 1438078890L, 'version': '2.1.2'}, 'qemu-img': {'release': '23.el7_1.6.1', 'buildtime': 1438078890L, 'version': '2.1.2'}, 'libvirt': {'release': '16.el7_1.3', 'buildtime': 1431461920L, 'version': '1.2.8'}, 'glusterfs': {'release': '1.el7', 'buildtime': 1438093544L, 'version': '3.7.3'}, 'mom': {'release': '1.el7.centos', 'buildtime': 1436814841L, 'version': '0.5.0'}, 'glusterfs-server': {'release': '1.el7', 'buildtime': 1438093544L, 'version': '3.7.3'}, 'glusterfs-geo-replication': {'release': '1.el7', 'buildtime': 1438093544L, 'version': '3.7.3'}}, 'numaNodeDistance': {'1': [21, 10], '0': [10, 21]}, 'cpuModel': 'Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz', 'liveMerge': 'true', 'hooks': {'before_vm_start': {'50_hostedengine': {'md5': '2a6d96c26a3599812be6cf1a13d9f485'}}}, 'vmTypes': ['kvm'], 'selinux': {'mode': '1'}, 'liveSnapshot': 'true', 'kdumpStatus': 0, 'networks': {}, 'bridges': {}, 'uuid': None, 'onlineCpus': '0,1,2,3,4,5,6,7,8,9,20,21,22,23,24,25,26,27,28,29,10,11,12,13,14,15,16,1= 7,18,19,30,31,32,33,34,35,36,37,38,39', 'nics': {'eno1': {'permhwaddr': '00:1e:67:b9:33:f9', 'addr': '', 'ipv6gateway': '::', 'ipv6addrs': [], 'mtu': '1500', 'dhcpv4': False, 'netmask': '', 'dhcpv6': False, 'ipv4addrs': [], 'cfg': {'SLAVE': 'yes', 'BOOTPROTO': 'none', 'MASTER': 'bond0', 'DEVICE': 'eno1', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, 'hwaddr': '00:1e:67:b9:33:f9', 'speed': 1000, 'gateway': ''}, 'eno2': {'permhwaddr': '00:1e:67:b9:33:fa', 'addr': '', 'ipv6gateway': '::', 'ipv6addrs': [], 'mtu': '1500', 'dhcpv4': False, 'netmask': '', 'dhcpv6': False, 'ipv4addrs': [], 'cfg': {'SLAVE': 'yes', 'BOOTPROTO': 'none', 'MASTER': 'bond0', 'DEVICE': 'eno2', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, 'hwaddr': '00:1e:67:b9:33:f9', 'speed': 1000, 'gateway': ''}, 'eno3': {'permhwaddr': '00:1e:67:b9:33:fb', 'addr': '', 'ipv6gateway': '::', 'ipv6addrs': [], 'mtu': '1500', 'dhcpv4': False, 'netmask': '', 'dhcpv6': False, 'ipv4addrs': [], 'cfg': {'SLAVE': 'yes', 'BOOTPROTO': 'none', 'MASTER': 'bond0', 'DEVICE': 'eno3', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, 'hwaddr': '00:1e:67:b9:33:f9', 'speed': 1000, 'gateway': ''}, 'eno4': {'permhwaddr': '00:1e:67:b9:33:fc', 'addr': '', 'ipv6gateway': '::', 'ipv6addrs': [], 'mtu': '1500', 'dhcpv4': False, 'netmask': '', 'dhcpv6': False, 'ipv4addrs': [], 'cfg': {'SLAVE': 'yes', 'BOOTPROTO': 'none', 'MASTER': 'bond0', 'DEVICE': 'eno4', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, 'hwaddr': '00:1e:67:b9:33:f9', 'speed': 1000, 'gateway': ''}}, 'software_revision': '0', 'hostdevPassthrough': 'false', 'clusterLevels': ['3.4', '3.5', '3.6'], 'cpuFlags': 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,= clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp= ,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_ts= c,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2= ,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_t= imer,aes,xsave,avx,f16c,rdrand,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dthe= rm,tpr_shadow,vnmi,flexpriority,ept,vpid,fsgsbase,smep,erms,model_Nehalem= ,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,mo= del_n270,model_SandyBridge', 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:aa2f33e6faca', 'netConfigDirty': 'False', 'supportedENGINEs': ['3.4', '3.5', '3.6'], 'autoNumaBalancing': 1, 'additionalFeatures': ['GLUSTER_SNAPSHOT', 'GLUSTER_GEO_REPLICATION', 'GLUSTER_BRICK_MANAGEMENT'], 'reservedMem': '321', 'bondings': {'bond0': {'ipv4addrs': ['131.130.44.101/24'], 'addr': '131.130.44.101', 'cfg': {'IPV6INIT': 'no', 'BONDING_MASTER': 'yes', 'IPADDR': '131.130.44.101', 'IPV4_FAILURE_FATAL': 'no', 'PREFIX': '24', 'BOOTPROTO': 'none', 'BONDING_OPTS': 'miimon=3D100 mode=3D802.3ad', 'DEVICE': 'bond0', 'TYPE': 'Bond', 'ONBOOT': 'yes', 'NAME': 'Bond connection bond0'}, 'ipv6addrs': ['fe80::21e:67ff:feb9:33f9/64'], 'active_slave': '', 'mtu': '1500', 'dhcpv4': False, 'netmask': '255.255.255.0', 'dhcpv6': False, 'slaves': ['eno1', 'eno2', 'eno3', 'eno4'], 'hwaddr': '00:1e:67:b9:33:f9', 'ipv6gateway': '::', 'gateway': '131.130.44.1', 'opts': {'miimon': '100', 'mode': '4'}}}, 'software_version': '4.17', 'memSize': '515720', 'cpuSpeed': '1272.304', 'numaNodes': {'1': {'totalMemory': '262144', 'cpus': [10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39]}, '0': {'totalMemory': '262065', 'cpus': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29]}}, 'cpuSockets': '2', 'vlans': {}, 'lastClientIface': 'lo', 'cpuCores': '20', 'kvmEnabled': 'true', 'guestOverhead': '65', 'version_name': 'Snow Man', 'cpuThreads': '40', 'emulatedMachines': ['pc-i440fx-rhel7.1.0', 'rhel6.3.0', 'pc-q35-rhel7.0.0', 'rhel6.1.0', 'rhel6.6.0', 'rhel6.2.0', 'pc', 'pc-q35-rhel7.1.0', 'q35', 'rhel6.4.0', 'rhel6.0.0', 'rhel6.5.0', 'pc-i440fx-rhel7.0.0'], 'rngSources': ['random'], 'operatingSystem': {'release': '1.1503.el7.centos.2.8', 'version': '7', 'name': 'RHEL'}, 'lastClient': '127.0.0.1'}} Thread-64::INFO::2015-08-31 12:33:15,298::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47404 stopped Reactor thread::INFO::2015-08-31 12:33:18,486::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47405 Reactor thread::DEBUG::2015-08-31 12:33:18,498::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:18,499::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47405 Reactor thread::DEBUG::2015-08-31 12:33:18,499::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47405) BindingXMLRPC::INFO::2015-08-31 12:33:18,499::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47405 Thread-65::INFO::2015-08-31 12:33:18,501::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47405 started Thread-65::INFO::2015-08-31 12:33:18,504::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47405 stopped Reactor thread::INFO::2015-08-31 12:33:33,520::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handl= e_accept) Accepting connection from 127.0.0.1:47406 Reactor thread::DEBUG::2015-08-31 12:33:33,532::protocoldetector::82::ProtocolDetector.Detector::(__init__)= Using required_size=3D11 Reactor thread::INFO::2015-08-31 12:33:33,533::protocoldetector::118::ProtocolDetector.Detector::(handle_r= ead) Detected protocol xml from 127.0.0.1:47406 Reactor thread::DEBUG::2015-08-31 12:33:33,533::bindingxmlrpc::1296::XmlDetector::(handle_socket) xml over http detected from ('127.0.0.1', 47406) BindingXMLRPC::INFO::2015-08-31 12:33:33,533::xmlrpc::73::vds.XMLRPCServer::(handle_request) Starting request handler for 127.0.0.1:47406 Thread-66::INFO::2015-08-31 12:33:33,535::xmlrpc::84::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47406 started Thread-66::INFO::2015-08-31 12:33:33,538::xmlrpc::92::vds.XMLRPCServer::(_process_requests) Request handler for 127.0.0.1:47406 stopped --=20 /dev/null --3W6fXveMv22FLGti6dq6jEIOIdx6nU7sR Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlXkND4ACgkQnGohgOrO9GEHSQCfS+zyjah2+6JV0GVK1MzIfESJ POYAoNOeh/pz1DIE7wKZOLKAXJfXdB79 =JwoY -----END PGP SIGNATURE----- --3W6fXveMv22FLGti6dq6jEIOIdx6nU7sR--

3 9

Re: [ovirt-users] oVirt 3.5.3.1 - Snapshot Failure with Error creating a new volume, code = 205
by Christian Rebel 01 Sep '15

01 Sep '15

This is a multipart message in MIME format. ------=_NextPart_000_033A_01D0E4E6.F69CDA30 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit This issue is also blocking me to perform a Clone, Export and so on, does anyone have an idea what is wrong with this VM and how I can fix it? From: Christian Rebel [mailto:christian.rebel@gmx.at] Sent: Freitag, 28. August 2015 15:45 To: users(a)ovirt.org Subject: oVirt 3.5.3.1 - Snapshot Failure with Error creating a new volume, code = 205 Hi all, I have a problem to perform a Snapshot on one of my important VMs, can anyone please be so kind and assist me. #### start of problematic vm snapshot #### 2015-08-28 15:36:08,172 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (ajp--127.0.0.1-8702-6) [439efb74] Lock Acquired to object EngineLock [exclusiveLocks= key: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c value: VM , sharedLocks= ] 2015-08-28 15:36:08,224 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-45) Command 44173a42-970f-42b3-8d09-ca113c58b5df persisting async task placeholder for child command be3c1922-aca6-4caf-a432-34fe95043446 2015-08-28 15:36:08,367 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-45) Command 44173a42-970f-42b3-8d09-ca113c58b5df persisting async task placeholder for child command 03a43c66-0fed-4a82-9139-7b89328f4ae4 2015-08-28 15:36:08,517 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-45) Running command: CreateAllSnapshotsFromVmCommand internal: false. Entities affected : ID: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c Type: VMAction group MANIPULATE_VM_SNAPSHOTS with role type USER 2015-08-28 15:36:08,550 INFO [org.ovirt.engine.core.bll.CreateSnapshotCommand] (org.ovirt.thread.pool-8-thread-45) [86e8aad] Running command: CreateSnapshotCommand internal: true. Entities affected : ID: 00000000-0000-0000-0000-000000000000 Type: Storage 2015-08-28 15:36:08,560 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [86e8aad] START, CreateSnapshotVDSCommand( storagePoolId = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit = false, storageDomainId = 937822d9-8a59-490f-95b7-48371ae32253, imageGroupId = e7e99288-ad83-406e-9cb6-7a5aa443de9b, imageSizeInBytes = 21474836480, volumeFormat = COW, newImageId = 2013aa82-6316-4b54-851b-88bf7f523b9c, newImageDescription = , imageId = c5762dec-d9d1-4842-84d1-05896d4d27fb, sourceImageGroupId = e7e99288-ad83-406e-9cb6-7a5aa443de9b), log id: d1ffce0 2015-08-28 15:36:08,567 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [86e8aad] -- executeIrsBrokerCommand: calling 'createVolume' with two new parameters: description and UUID 2015-08-28 15:36:08,655 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [86e8aad] FINISH, CreateSnapshotVDSCommand, return: 2013aa82-6316-4b54-851b-88bf7f523b9c, log id: d1ffce0 2015-08-28 15:36:08,668 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-8-thread-45) [86e8aad] CommandAsyncTask::Adding CommandMultiAsyncTasks object for command 44173a42-970f-42b3-8d09-ca113c58b5df 2015-08-28 15:36:08,670 INFO [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] (org.ovirt.thread.pool-8-thread-45) [86e8aad] CommandMultiAsyncTasks::AttachTask: Attaching task 0221e559-0eec-468b-bc4f-a7aaa487661a to command 44173a42-970f-42b3-8d09-ca113c58b5df. 2015-08-28 15:36:08,734 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (org.ovirt.thread.pool-8-thread-45) [86e8aad] Adding task 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters), polling hasn't started yet.. 2015-08-28 15:36:08,793 INFO [org.ovirt.engine.core.bll.CreateSnapshotCommand] (org.ovirt.thread.pool-8-thread-45) [53768935] Running command: CreateSnapshotCommand internal: true. Entities affected : ID: 00000000-0000-0000-0000-000000000000 Type: Storage 2015-08-28 15:36:08,797 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [53768935] START, CreateSnapshotVDSCommand( storagePoolId = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit = false, storageDomainId = 937822d9-8a59-490f-95b7-48371ae32253, imageGroupId = 6281b597-020d-4ea7-a954-bb798a0ca4f1, imageSizeInBytes = 161061273600, volumeFormat = COW, newImageId = fd9c6e36-90ca-488a-8cbd-534a0caf6886, newImageDescription = , imageId = 2a2015a1-f62c-4e32-8b04-77ece2ba4cc1, sourceImageGroupId = 6281b597-020d-4ea7-a954-bb798a0ca4f1), log id: 4bc33f2e 2015-08-28 15:36:08,799 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [53768935] -- executeIrsBrokerCommand: calling 'createVolume' with two new parameters: description and UUID 2015-08-28 15:36:09,000 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] (org.ovirt.thread.pool-8-thread-45) [53768935] FINISH, CreateSnapshotVDSCommand, return: fd9c6e36-90ca-488a-8cbd-534a0caf6886, log id: 4bc33f2e 2015-08-28 15:36:09,011 INFO [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] (org.ovirt.thread.pool-8-thread-45) [53768935] CommandMultiAsyncTasks::AttachTask: Attaching task c502e058-4b72-4d7f-9c97-a264866289e2 to command 44173a42-970f-42b3-8d09-ca113c58b5df. 2015-08-28 15:36:09,076 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (org.ovirt.thread.pool-8-thread-45) [53768935] Adding task c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters), polling hasn't started yet.. 2015-08-28 15:36:09,235 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-45) Correlation ID: 439efb74, Job ID: 760f7564-fb7f-4bec-8ef7-5a1d3b7651fc, Call Stack: null, Custom Event ID: -1, Message: Snapshot 'before upg' creation for VM 'Katello_2.2' was initiated by admin@internal. 2015-08-28 15:36:09,237 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-45) BaseAsyncTask::startPollingTask: Starting to poll task 0221e559-0eec-468b-bc4f-a7aaa487661a. 2015-08-28 15:36:09,237 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-45) BaseAsyncTask::startPollingTask: Starting to poll task c502e058-4b72-4d7f-9c97-a264866289e2. 2015-08-28 15:36:11,279 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (DefaultQuartzScheduler_Worker-80) Polling and updating Async Tasks: 2 tasks, 2 tasks to poll now 2015-08-28 15:36:11,309 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] (DefaultQuartzScheduler_Worker-80) Failed in HSMGetAllTasksStatusesVDS method 2015-08-28 15:36:11,311 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-80) SPMAsyncTask::PollTask: Polling task 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned status finished, result 'cleanFailure'. 2015-08-28 15:36:11,343 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-80) BaseAsyncTask::logEndTaskFailure: Task 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with failure: -- Result: cleanFailure -- Message: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205, -- Exception: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205 2015-08-28 15:36:11,349 INFO [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] (DefaultQuartzScheduler_Worker-80) Task with DB Task ID 639c5e5b-2713-4d9f-b95c-6dd7ed2fc370 and VDSM Task ID c502e058-4b72-4d7f-9c97-a264866289e2 is in state Polling. End action for command 44173a42-970f-42b3-8d09-ca113c58b5df will proceed when all the entitys tasks are completed. 2015-08-28 15:36:11,352 WARN [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-80) SPMAsyncTask::PollTask: Polling task c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned status aborting. 2015-08-28 15:36:11,355 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (DefaultQuartzScheduler_Worker-80) Finished polling Tasks, will poll again in 10 seconds. 2015-08-28 15:36:21,367 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] (DefaultQuartzScheduler_Worker-4) Failed in HSMGetAllTasksStatusesVDS method 2015-08-28 15:36:21,369 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] (DefaultQuartzScheduler_Worker-4) Failed in HSMGetAllTasksStatusesVDS method 2015-08-28 15:36:21,402 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-4) BaseAsyncTask::logEndTaskFailure: Task 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with failure: -- Result: cleanFailure -- Message: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205, -- Exception: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205 2015-08-28 15:36:21,409 INFO [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] (DefaultQuartzScheduler_Worker-4) Task with DB Task ID 639c5e5b-2713-4d9f-b95c-6dd7ed2fc370 and VDSM Task ID c502e058-4b72-4d7f-9c97-a264866289e2 is in state Polling. End action for command 44173a42-970f-42b3-8d09-ca113c58b5df will proceed when all the entitys tasks are completed. 2015-08-28 15:36:21,412 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-4) SPMAsyncTask::PollTask: Polling task c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned status finished, result 'cleanFailure'. 2015-08-28 15:36:21,427 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler_Worker-4) BaseAsyncTask::logEndTaskFailure: Task c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command CreateAllSnapshotsFromVm, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with failure: -- Result: cleanFailure -- Message: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205, -- Exception: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = Error creating a new volume, code = 205 2015-08-28 15:36:21,433 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (DefaultQuartzScheduler_Worker-4) CommandAsyncTask::endActionIfNecessary: All tasks of command 44173a42-970f-42b3-8d09-ca113c58b5df has ended -> executing endAction 2015-08-28 15:36:21,436 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (DefaultQuartzScheduler_Worker-4) CommandAsyncTask::endAction: Ending action for 2 tasks (command ID: 44173a42-970f-42b3-8d09-ca113c58b5df): calling endAction . 2015-08-28 15:36:21,438 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-8-thread-21) CommandAsyncTask::endCommandAction [within thread] context: Attempting to endAction CreateAllSnapshotsFromVm, executionIndex: 0 2015-08-28 15:36:21,510 ERROR [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-21) Ending command with failure: org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand 2015-08-28 15:36:21,527 ERROR [org.ovirt.engine.core.bll.CreateSnapshotCommand] (org.ovirt.thread.pool-8-thread-21) [53768935] Ending command with failure: org.ovirt.engine.core.bll.CreateSnapshotCommand 2015-08-28 15:36:21,660 ERROR [org.ovirt.engine.core.bll.CreateSnapshotCommand] (org.ovirt.thread.pool-8-thread-21) [86e8aad] Ending command with failure: org.ovirt.engine.core.bll.CreateSnapshotCommand 2015-08-28 15:36:21,703 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-8-thread-21) Lock freed to object EngineLock [exclusiveLocks= key: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c value: VM , sharedLocks= ] 2015-08-28 15:36:21,719 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-21) Correlation ID: 439efb74, Job ID: 760f7564-fb7f-4bec-8ef7-5a1d3b7651fc, Call Stack: null, Custom Event ID: -1, Message: Failed to complete snapshot 'before upg' creation for VM 'Katello_2.2'. 2015-08-28 15:36:21,723 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-8-thread-21) CommandAsyncTask::HandleEndActionResult [within thread]: endAction for action type CreateAllSnapshotsFromVm completed, handling the result. 2015-08-28 15:36:21,725 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-8-thread-21) CommandAsyncTask::HandleEndActionResult [within thread]: endAction for action type CreateAllSnapshotsFromVm hasn't succeeded, clearing tasks. 2015-08-28 15:36:21,735 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-21) SPMAsyncTask::ClearAsyncTask: Attempting to clear task c502e058-4b72-4d7f-9c97-a264866289e2 2015-08-28 15:36:21,738 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) START, SPMClearTaskVDSCommand( storagePoolId = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit = false, taskId = c502e058-4b72-4d7f-9c97-a264866289e2), log id: 60494436 2015-08-28 15:36:21,768 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) START, HSMClearTaskVDSCommand(HostName = itsatltovirtaio.domain.local, HostId = b783a2ee-4a63-46ca-9afc-b3b74f0e10ce, taskId=c502e058-4b72-4d7f-9c97-a264866289e2), log id: 6a1d669c 2015-08-28 15:36:21,788 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) FINISH, HSMClearTaskVDSCommand, log id: 6a1d669c 2015-08-28 15:36:21,790 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) FINISH, SPMClearTaskVDSCommand, log id: 60494436 2015-08-28 15:36:21,802 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-21) BaseAsyncTask::removeTaskFromDB: Removed task c502e058-4b72-4d7f-9c97-a264866289e2 from DataBase 2015-08-28 15:36:21,804 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-21) SPMAsyncTask::ClearAsyncTask: Attempting to clear task 0221e559-0eec-468b-bc4f-a7aaa487661a 2015-08-28 15:36:21,806 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) START, SPMClearTaskVDSCommand( storagePoolId = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit = false, taskId = 0221e559-0eec-468b-bc4f-a7aaa487661a), log id: 76547de3 2015-08-28 15:36:21,836 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) START, HSMClearTaskVDSCommand(HostName = itsatltovirtaio.domain.local, HostId = b783a2ee-4a63-46ca-9afc-b3b74f0e10ce, taskId=0221e559-0eec-468b-bc4f-a7aaa487661a), log id: 2514fec6 2015-08-28 15:36:21,856 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) FINISH, HSMClearTaskVDSCommand, log id: 2514fec6 2015-08-28 15:36:21,858 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (org.ovirt.thread.pool-8-thread-21) FINISH, SPMClearTaskVDSCommand, log id: 76547de3 2015-08-28 15:36:21,869 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (org.ovirt.thread.pool-8-thread-21) BaseAsyncTask::removeTaskFromDB: Removed task 0221e559-0eec-468b-bc4f-a7aaa487661a from DataBase 2015-08-28 15:36:21,871 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-8-thread-21) CommandAsyncTask::HandleEndActionResult [within thread]: Removing CommandMultiAsyncTasks object for entity 44173a42-970f-42b3-8d09-ca113c58b5df ------=_NextPart_000_033A_01D0E4E6.F69CDA30 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DDE-AT link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>This issue is also blocking me to = perform a Clone, Export and so on, does anyone have an idea what is = wrong with this VM and how I can fix it?<o:p></o:p><o:p> </o:p><div><div = style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm = 0cm 0cm'>From: Christian Rebel [mailto:christian.rebel@gmx.at] = Sent: Freitag, 28. August 2015 15:45 To: = users(a)ovirt.org Subject: oVirt 3.5.3.1 - Snapshot Failure with = Error creating a new volume, code =3D = 205<o:p></o:p></div></div><o:p> </o:p>Hi all,<o:p></o:p><o:p> </o:p>I have a = problem to perform a Snapshot on one of my important VMs, can anyone = please be so kind and assist me…<o:p></o:p><o:p> </o:p>#### start = of problematic vm snapshot ####<o:p></o:p>2015-08-28 = 15:36:08,172 INFO  = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (ajp--127.0.0.1-8702-6) [439efb74] Lock Acquired to object EngineLock = [exclusiveLocks=3D key: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c value: = VM<o:p></o:p>, sharedLocks=3D ]<o:p></o:p>2015-08-28 = 15:36:08,224 INFO  = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (org.ovirt.thread.pool-8-thread-45) Command = 44173a42-970f-42b3-8d09-ca113c58b5df persisting async task placeholder = for child command = be3c1922-aca6-4caf-a432-34fe95043446<o:p></o:p>2015-08-28 = 15:36:08,367 INFO  = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (org.ovirt.thread.pool-8-thread-45) Command = 44173a42-970f-42b3-8d09-ca113c58b5df persisting async task placeholder = for child command = 03a43c66-0fed-4a82-9139-7b89328f4ae4<o:p></o:p>2015-08-28 = 15:36:08,517 INFO  = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (org.ovirt.thread.pool-8-thread-45) Running command: = CreateAllSnapshotsFromVmCommand internal: false. Entities affected = :  ID: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c Type: VMAction group = MANIPULATE_VM_SNAPSHOTS with role type USER<o:p></o:p>2015-08-28 = 15:36:08,550 INFO  = [org.ovirt.engine.core.bll.CreateSnapshotCommand] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] Running command: = CreateSnapshotCommand internal: true. Entities affected :  ID: = 00000000-0000-0000-0000-000000000000 Type: = Storage<o:p></o:p>2015-08-28 15:36:08,560 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] START, = CreateSnapshotVDSCommand( storagePoolId =3D = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit =3D false, = storageDomainId =3D 937822d9-8a59-490f-95b7-48371ae32253, imageGroupId = =3D e7e99288-ad83-406e-9cb6-7a5aa443de9b, imageSizeInBytes =3D = 21474836480, volumeFormat =3D COW, newImageId =3D = 2013aa82-6316-4b54-851b-88bf7f523b9c, newImageDescription =3D , imageId = =3D c5762dec-d9d1-4842-84d1-05896d4d27fb, sourceImageGroupId =3D = e7e99288-ad83-406e-9cb6-7a5aa443de9b), log id: = d1ffce0<o:p></o:p>2015-08-28 15:36:08,567 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] -- = executeIrsBrokerCommand: calling 'createVolume' with two new parameters: = description and UUID<o:p></o:p>2015-08-28 15:36:08,655 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] FINISH, = CreateSnapshotVDSCommand, return: 2013aa82-6316-4b54-851b-88bf7f523b9c, = log id: d1ffce0<o:p></o:p>2015-08-28 15:36:08,668 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] CommandAsyncTask::Adding = CommandMultiAsyncTasks object for command = 44173a42-970f-42b3-8d09-ca113c58b5df<o:p></o:p>2015-08-28 = 15:36:08,670 INFO  = [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] = CommandMultiAsyncTasks::AttachTask: Attaching task = 0221e559-0eec-468b-bc4f-a7aaa487661a to command = 44173a42-970f-42b3-8d09-ca113c58b5df.<o:p></o:p>2015-08-28 = 15:36:08,734 INFO  = [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] = (org.ovirt.thread.pool-8-thread-45) [86e8aad] Adding task = 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters), polling = hasn't started yet..<o:p></o:p>2015-08-28 15:36:08,793 INFO  = [org.ovirt.engine.core.bll.CreateSnapshotCommand] = (org.ovirt.thread.pool-8-thread-45) [53768935] Running command: = CreateSnapshotCommand internal: true. Entities affected :  ID: = 00000000-0000-0000-0000-000000000000 Type: = Storage<o:p></o:p>2015-08-28 15:36:08,797 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [53768935] START, = CreateSnapshotVDSCommand( storagePoolId =3D = 00000002-0002-0002-0002-000000000021, ignoreFailoverLimit =3D false, = storageDomainId =3D 937822d9-8a59-490f-95b7-48371ae32253, imageGroupId = =3D 6281b597-020d-4ea7-a954-bb798a0ca4f1, imageSizeInBytes =3D = 161061273600, volumeFormat =3D COW, newImageId =3D = fd9c6e36-90ca-488a-8cbd-534a0caf6886, newImageDescription =3D , imageId = =3D 2a2015a1-f62c-4e32-8b04-77ece2ba4cc1, sourceImageGroupId =3D = 6281b597-020d-4ea7-a954-bb798a0ca4f1), log id: = 4bc33f2e<o:p></o:p>2015-08-28 15:36:08,799 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [53768935] -- = executeIrsBrokerCommand: calling 'createVolume' with two new parameters: = description and UUID<o:p></o:p>2015-08-28 15:36:09,000 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] = (org.ovirt.thread.pool-8-thread-45) [53768935] FINISH, = CreateSnapshotVDSCommand, return: fd9c6e36-90ca-488a-8cbd-534a0caf6886, = log id: 4bc33f2e<o:p></o:p>2015-08-28 15:36:09,011 INFO  = [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] = (org.ovirt.thread.pool-8-thread-45) [53768935] = CommandMultiAsyncTasks::AttachTask: Attaching task = c502e058-4b72-4d7f-9c97-a264866289e2 to command = 44173a42-970f-42b3-8d09-ca113c58b5df.<o:p></o:p>2015-08-28 = 15:36:09,076 INFO  = [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] = (org.ovirt.thread.pool-8-thread-45) [53768935] Adding task = c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters), polling = hasn't started yet..<o:p></o:p>2015-08-28 15:36:09,235 INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (org.ovirt.thread.pool-8-thread-45) Correlation ID: 439efb74, Job ID: = 760f7564-fb7f-4bec-8ef7-5a1d3b7651fc, Call Stack: null, Custom Event ID: = -1, Message: Snapshot 'before upg' creation for VM 'Katello_2.2' was = initiated by admin@internal.<o:p></o:p>2015-08-28 = 15:36:09,237 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-45) BaseAsyncTask::startPollingTask: = Starting to poll task = 0221e559-0eec-468b-bc4f-a7aaa487661a.<o:p></o:p>2015-08-28 = 15:36:09,237 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-45) BaseAsyncTask::startPollingTask: = Starting to poll task = c502e058-4b72-4d7f-9c97-a264866289e2.<o:p></o:p>2015-08-28 = 15:36:11,279 INFO  = [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] = (DefaultQuartzScheduler_Worker-80) Polling and updating Async Tasks: 2 = tasks, 2 tasks to poll now<o:p></o:p>2015-08-28 = 15:36:11,309 ERROR = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSComma= nd] (DefaultQuartzScheduler_Worker-80) Failed in = HSMGetAllTasksStatusesVDS method<o:p></o:p>2015-08-28 = 15:36:11,311 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-80) SPMAsyncTask::PollTask: Polling task = 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned = status finished, result 'cleanFailure'.<o:p></o:p>2015-08-28 = 15:36:11,343 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-80) BaseAsyncTask::logEndTaskFailure: = Task 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with = failure:<o:p></o:p>-- Result: cleanFailure<o:p></o:p>-- Message: = VDSGenericException: VDSErrorException: Failed to = HSMGetAllTasksStatusesVDS, error =3D Error creating a new volume, code = =3D 205,<o:p></o:p>-- Exception: VDSGenericException: = VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error =3D Error = creating a new volume, code =3D 205<o:p></o:p>2015-08-28 = 15:36:11,349 INFO  = [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] = (DefaultQuartzScheduler_Worker-80) Task with DB Task ID = 639c5e5b-2713-4d9f-b95c-6dd7ed2fc370 and VDSM Task ID = c502e058-4b72-4d7f-9c97-a264866289e2 is in state Polling. End action for = command 44173a42-970f-42b3-8d09-ca113c58b5df will proceed when all the = entitys tasks are completed.<o:p></o:p>2015-08-28 = 15:36:11,352 WARN  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-80) SPMAsyncTask::PollTask: Polling task = c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned = status aborting.<o:p></o:p>2015-08-28 15:36:11,355 INFO  = [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] = (DefaultQuartzScheduler_Worker-80) Finished polling Tasks, will poll = again in 10 seconds.<o:p></o:p>2015-08-28 15:36:21,367 ERROR = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSComma= nd] (DefaultQuartzScheduler_Worker-4) Failed in = HSMGetAllTasksStatusesVDS method<o:p></o:p>2015-08-28 = 15:36:21,369 ERROR = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSComma= nd] (DefaultQuartzScheduler_Worker-4) Failed in = HSMGetAllTasksStatusesVDS method<o:p></o:p>2015-08-28 = 15:36:21,402 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-4) BaseAsyncTask::logEndTaskFailure: Task = 0221e559-0eec-468b-bc4f-a7aaa487661a (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with = failure:<o:p></o:p>-- Result: cleanFailure<o:p></o:p>-- Message: = VDSGenericException: VDSErrorException: Failed to = HSMGetAllTasksStatusesVDS, error =3D Error creating a new volume, code = =3D 205,<o:p></o:p>-- Exception: VDSGenericException: = VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error =3D Error = creating a new volume, code =3D 205<o:p></o:p>2015-08-28 = 15:36:21,409 INFO  = [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] = (DefaultQuartzScheduler_Worker-4) Task with DB Task ID = 639c5e5b-2713-4d9f-b95c-6dd7ed2fc370 and VDSM Task ID = c502e058-4b72-4d7f-9c97-a264866289e2 is in state Polling. End action for = command 44173a42-970f-42b3-8d09-ca113c58b5df will proceed when all the = entitys tasks are completed.<o:p></o:p>2015-08-28 = 15:36:21,412 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-4) SPMAsyncTask::PollTask: Polling task = c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) returned = status finished, result 'cleanFailure'.<o:p></o:p>2015-08-28 = 15:36:21,427 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (DefaultQuartzScheduler_Worker-4) BaseAsyncTask::logEndTaskFailure: Task = c502e058-4b72-4d7f-9c97-a264866289e2 (Parent Command = CreateAllSnapshotsFromVm, Parameters Type = org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with = failure:<o:p></o:p>-- Result: cleanFailure<o:p></o:p>-- Message: = VDSGenericException: VDSErrorException: Failed to = HSMGetAllTasksStatusesVDS, error =3D Error creating a new volume, code = =3D 205,<o:p></o:p>-- Exception: VDSGenericException: = VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error =3D Error = creating a new volume, code =3D 205<o:p></o:p>2015-08-28 = 15:36:21,433 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (DefaultQuartzScheduler_Worker-4) = CommandAsyncTask::endActionIfNecessary: All tasks of command = 44173a42-970f-42b3-8d09-ca113c58b5df has ended -> executing = endAction<o:p></o:p>2015-08-28 15:36:21,436 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (DefaultQuartzScheduler_Worker-4) CommandAsyncTask::endAction: Ending = action for 2 tasks (command ID: 44173a42-970f-42b3-8d09-ca113c58b5df): = calling endAction .<o:p></o:p>2015-08-28 15:36:21,438 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (org.ovirt.thread.pool-8-thread-21) CommandAsyncTask::endCommandAction = [within thread] context: Attempting to endAction = CreateAllSnapshotsFromVm, executionIndex: 0<o:p></o:p>2015-08-28 = 15:36:21,510 ERROR = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (org.ovirt.thread.pool-8-thread-21) Ending command with failure: = org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand<o:p></o:p></spa= n>2015-08-28 15:36:21,527 ERROR = [org.ovirt.engine.core.bll.CreateSnapshotCommand] = (org.ovirt.thread.pool-8-thread-21) [53768935] Ending command with = failure: = org.ovirt.engine.core.bll.CreateSnapshotCommand<o:p></o:p>2015-08-28 = 15:36:21,660 ERROR [org.ovirt.engine.core.bll.CreateSnapshotCommand] = (org.ovirt.thread.pool-8-thread-21) [86e8aad] Ending command with = failure: = org.ovirt.engine.core.bll.CreateSnapshotCommand<o:p></o:p>2015-08-28 = 15:36:21,703 INFO  = [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] = (org.ovirt.thread.pool-8-thread-21) Lock freed to object EngineLock = [exclusiveLocks=3D key: ee2ea036-2af3-4a18-9329-08a7b0e7ce7c value: = VM<o:p></o:p>, sharedLocks=3D ]<o:p></o:p>2015-08-28 = 15:36:21,719 ERROR = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (org.ovirt.thread.pool-8-thread-21) Correlation ID: 439efb74, Job ID: = 760f7564-fb7f-4bec-8ef7-5a1d3b7651fc, Call Stack: null, Custom Event ID: = -1, Message: Failed to complete snapshot 'before upg' creation for VM = 'Katello_2.2'.<o:p></o:p>2015-08-28 15:36:21,723 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (org.ovirt.thread.pool-8-thread-21) = CommandAsyncTask::HandleEndActionResult [within thread]: endAction for = action type CreateAllSnapshotsFromVm completed, handling the = result.<o:p></o:p>2015-08-28 15:36:21,725 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (org.ovirt.thread.pool-8-thread-21) = CommandAsyncTask::HandleEndActionResult [within thread]: endAction for = action type CreateAllSnapshotsFromVm hasn't succeeded, clearing = tasks.<o:p></o:p>2015-08-28 15:36:21,735 INFO  = [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-21) SPMAsyncTask::ClearAsyncTask: = Attempting to clear task = c502e058-4b72-4d7f-9c97-a264866289e2<o:p></o:p>2015-08-28 = 15:36:21,738 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) START, SPMClearTaskVDSCommand( = storagePoolId =3D 00000002-0002-0002-0002-000000000021, = ignoreFailoverLimit =3D false, taskId =3D = c502e058-4b72-4d7f-9c97-a264866289e2), log id: = 60494436<o:p></o:p>2015-08-28 15:36:21,768 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) START, = HSMClearTaskVDSCommand(HostName =3D itsatltovirtaio.domain.local, HostId = =3D b783a2ee-4a63-46ca-9afc-b3b74f0e10ce, = taskId=3Dc502e058-4b72-4d7f-9c97-a264866289e2), log id: = 6a1d669c<o:p></o:p>2015-08-28 15:36:21,788 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) FINISH, HSMClearTaskVDSCommand, log = id: 6a1d669c<o:p></o:p>2015-08-28 15:36:21,790 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) FINISH, SPMClearTaskVDSCommand, log = id: 60494436<o:p></o:p>2015-08-28 15:36:21,802 INFO  = [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-21) BaseAsyncTask::removeTaskFromDB: = Removed task c502e058-4b72-4d7f-9c97-a264866289e2 from = DataBase<o:p></o:p>2015-08-28 15:36:21,804 INFO  = [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-21) SPMAsyncTask::ClearAsyncTask: = Attempting to clear task = 0221e559-0eec-468b-bc4f-a7aaa487661a<o:p></o:p>2015-08-28 = 15:36:21,806 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) START, SPMClearTaskVDSCommand( = storagePoolId =3D 00000002-0002-0002-0002-000000000021, = ignoreFailoverLimit =3D false, taskId =3D = 0221e559-0eec-468b-bc4f-a7aaa487661a), log id: = 76547de3<o:p></o:p>2015-08-28 15:36:21,836 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) START, = HSMClearTaskVDSCommand(HostName =3D itsatltovirtaio.domain.local, HostId = =3D b783a2ee-4a63-46ca-9afc-b3b74f0e10ce, = taskId=3D0221e559-0eec-468b-bc4f-a7aaa487661a), log id: = 2514fec6<o:p></o:p>2015-08-28 15:36:21,856 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) FINISH, HSMClearTaskVDSCommand, log = id: 2514fec6<o:p></o:p>2015-08-28 15:36:21,858 INFO  = [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] = (org.ovirt.thread.pool-8-thread-21) FINISH, SPMClearTaskVDSCommand, log = id: 76547de3<o:p></o:p>2015-08-28 15:36:21,869 INFO  = [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] = (org.ovirt.thread.pool-8-thread-21) BaseAsyncTask::removeTaskFromDB: = Removed task 0221e559-0eec-468b-bc4f-a7aaa487661a from = DataBase<o:p></o:p>2015-08-28 15:36:21,871 INFO  = [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] = (org.ovirt.thread.pool-8-thread-21) = CommandAsyncTask::HandleEndActionResult [within thread]: Removing = CommandMultiAsyncTasks object for entity = 44173a42-970f-42b3-8d09-ca113c58b5df<o:p></o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p></div></body></html> ------=_NextPart_000_033A_01D0E4E6.F69CDA30--

1 0

Migrating old VMWare VM to oVirt?
by Chris Adams 01 Sep '15

01 Sep '15

I have an ancient VM that I need to migrate to oVirt if possible. It is Windows 2000 Server on VMWare ESXi 4.1 (yeah, I know, please don't laugh). Is there any possiblity of making this work? Reinstalling the Windows system (or upgrading) is just not practical at this time, and I need to get this thing off of the old VMWare box. -- Chris Adams <cma(a)cmadams.net>

3 3

mirrorlist-ovirt-3.4-fc$releasever not available
by Пузиков Константин 01 Sep '15

01 Sep '15

http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.4-fc$releasever Error: Cannot find a valid baseurl for repo: ovirt-3.4-stable

1 0

Migration from all-in-one to self hosted engine tips?
by Gianluca Cecchi 01 Sep '15

01 Sep '15

Hello, considering that all-in-one could become deprecated, any tips in migrating from: workstation with Fedora 20 + oVirt 3.5.3 All-In-One and local disks to (when 3.6 released): same workstation with Fedora 22 + oVirt 3.6.0 Self Hosted Engine ? I already tested direct migration from Fedora 20 to Fedora 22 on another workstation (without oVirt). Only bugs found in that case: - default kernel after migration is not the updated one (and had a bug with Intel ICH8 sound modules) --> update of grub2 default kernel solves it - nvidia kernel modules don't load and no graphic environment available due to this --> solved booting in init 3 and making a "depmod -a" and then kernel modules are correctly loaded So it would be nice to get any suggestion, that I can eventually test on a dev environment. Thanks in advance, Gianluca

2 1

Feature request: bind mounting filesystems
by Steve Kilduff 01 Sep '15

01 Sep '15

Hi, Bind mounting paths would be a great feature. It would hopefully make storage backends transparent and not tie us to nfs or gluster. Idea is shared storage is available on all servers at /mnt/share, ovirt would bind mount this source on all servers. Maybe this even works, but in that case I cant find documentation or examples. Cheers, Steve Kilduff

2 1

[ANN] Release Process changes
by Sandro Bonazzola 01 Sep '15

01 Sep '15

The oVirt Team strive to provide a stable solution and provide timely updates to improve on that solution. After GA of every major release we try to provide updates to discovered issues on a monthly basis. In the current process we announce a release date just after the previous release (usually a month ahead) and aim to fix to scoped issues for this date. Sometimes we fail to meet that date when we see that the scope was not met or that the stability is not up to the release standard. This means that we have to change the announced date and this might happen several times. In order to improve on this process, maintenance (not like major) releases will not have a declared date and will be released when ready. We will remain attentive to needs of urgent issues and will continue to aim for monthly release, but instead we will provide weekly updates on current status of development and testing of maintenance releases and gaps we are working to close for that release. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

oVirt 3.5.3 and Network Unified Persistence issues?
by Simon Barrett 01 Sep '15

01 Sep '15

--_000_D86C48DF8800164BBE50B87623F7AC9580A16459ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I'm running into a problem with my upgrades to oVirt 3.5.3 and wanted to ch= eck if the following is a known issue. I have multiple vlan tagged interfaces configured. The files are being gen= erated as expected by vdsm. The vlan 108 interface below is used by the ovi= rtmgmt bridge. The uatdev_ben, bond0.192, dev_office, bond0.124 interface d= efinitions all have ONBOOT=3Dno. root@host> grep -i onboot ifcfg* | grep -v bak ifcfg-bond0:ONBOOT=3Dyes ifcfg-bond0.108:ONBOOT=3Dyes ifcfg-bond0.124:ONBOOT=3Dno ifcfg-bond0.192:ONBOOT=3Dno ifcfg-dev_office:ONBOOT=3Dno ifcfg-eth0:ONBOOT=3Dyes ifcfg-eth1:ONBOOT=3Dyes ifcfg-eth2:ONBOOT=3Dno ifcfg-eth3:ONBOOT=3Dno ifcfg-lo:ONBOOT=3Dyes ifcfg-ovirtmgmt:ONBOOT=3Dyes ifcfg-uatdev_ben:ONBOOT=3Dno The persistence configuration files are where they should be (I think): root@host> ls -l /var/lib/vdsm/persistence/netconf/nets/ total 12 -rw-r--r-- 1 root root 121 Aug 24 22:44 dev_office -rw-r--r-- 1 root root 173 Aug 24 22:44 ovirtmgmt -rw-r--r-- 1 root root 121 Aug 24 22:44 uatdev_ben If I were to do a "service network restart" on the node, the uatdev_ben, de= v_office, bond0.124 & bond0.192 are removed and then not restored as the "O= NBOOT=3Dno". I assumed that vdsmd would re-create the dev_office and uatdev= _ben interfaces so restarted vdsmd but they were not restored. I tried a "v= dsm-tool restore-nets" to see if that would restore the interfaces but no j= oy. Am I missing something? Is there another method I should use to recover the= missing interfaces? Should the ifcfg files all be configured with "ONBOOT= =3Dyes" just in case someone does run a "service network restart"? My oVirt nodes are CentOS 6.5, I'm not using the node iso. Many thanks in advance for any assistance. Regards, Simon Barrett --_000_D86C48DF8800164BBE50B87623F7AC9580A16459ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I’m running into a problem with my upgrades to= oVirt 3.5.3 and wanted to check if the following is a known issue.<o:p></o= :p> <o:p> </o:p> I have  multiple vlan tagged interfaces configu= red. The files are being generated as expected by vdsm. The vlan 108 interf= ace below is used by the ovirtmgmt bridge. The uatdev_ben, bond0.192, dev_o= ffice, bond0.124 interface definitions all have ONBOOT=3Dno.<o:p></o:p> <o:p> </o:p> root@host> grep -i o= nboot ifcfg* | grep -v bak<o:p></o:p> ifcfg-bond0:ONBOOT=3Dye= s<o:p></o:p> ifcfg-bond0.108:ONBOOT= =3Dyes<o:p></o:p> ifcfg-bond0.124:ONBOOT= =3Dno<o:p></o:p> ifcfg-bond0.192:ONBOOT= =3Dno<o:p></o:p> ifcfg-dev_office:ONBOOT= =3Dno<o:p></o:p> ifcfg-eth0:ONBOOT=3Dyes= <o:p></o:p> ifcfg-eth1:ONBOOT=3Dyes= <o:p></o:p> ifcfg-eth2:ONBOOT=3Dno<= o:p></o:p> ifcfg-eth3:ONBOOT=3Dno<= o:p></o:p> ifcfg-lo:ONBOOT=3Dyes<o= :p></o:p> ifcfg-ovirtmgmt:ONBOOT= =3Dyes<o:p></o:p> ifcfg-uatdev_ben:ONBOOT= =3Dno<o:p></o:p> <o:p> </o:p> The persistence configuration files are where they s= hould be (I think):<o:p></o:p> <o:p> </o:p> root@host> ls -l /va= r/lib/vdsm/persistence/netconf/nets/<o:p></o:p> total 12<o:p></o:p> -rw-r--r-- 1 root root = 121 Aug 24 22:44 dev_office<o:p></o:p> -rw-r--r-- 1 root root = 173 Aug 24 22:44 ovirtmgmt<o:p></o:p> -rw-r--r-- 1 root root = 121 Aug 24 22:44 uatdev_ben<o:p></o:p> <o:p> </o:p> If I were to do a “service network restart&#82= 21; on the node, the uatdev_ben, dev_office, bond0.124 & bond0.192 are = removed and then not restored as the “ONBOOT=3Dno”. I assumed t= hat vdsmd would re-create the dev_office and uatdev_ben interfaces so restarted vdsmd but they were not restored. I tried a “vdsm-tool = restore-nets” to see if that would restore the interfaces but no joy.= <o:p></o:p> <o:p> </o:p> Am I missing something? Is there another method I sh= ould use to recover the missing interfaces? Should the ifcfg files all be c= onfigured with “ONBOOT=3Dyes” just in case someone does run a &= #8220;service network restart”?<o:p></o:p> <o:p> </o:p> My oVirt nodes are CentOS 6.5, I’m not using t= he node iso. <o:p> </o:p> <o:p> </o:p> Many thanks in advance for any assistance.<o:p></o:p= > <o:p> </o:p> Regards,<o:p></o:p> <o:p> </o:p> Simon Barrett<o:p></o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC9580A16459ln2wio001devtra_--

3 3