- Users - oVirt List Archives

No utilization data collected Ovirt reports 3.5.1
by Punit Dambiwal 02 Feb '15

02 Feb '15

Hi, I have updated Ovirt 3.5 to Ovirt 3.5.1...engine,dwh and reports on the same server...and added 5 hostnode...i have created some vm's but no utilization data collected by reports server.... i haven't seen any error in the reports and dwh logs.... Thanks, Punit

2 3

Installation on HP/IBM Server
by Mohd Zainal Abidin 01 Feb '15

01 Feb '15

Hi, Does anyone have success and full operate on those hardware? We have a client that want to migrate it from VMware. I hope can get good feedback. Thanks.

1 0

Adding multiple NFS storage and migrate volumes to other
by mad Engineer 01 Feb '15

01 Feb '15

Hello All, We are using NFS shared storage between hosts,and have running vms. Now we are planning to remove existing disks and replace it with with different disks. Is there any way we can add one more NFS say NFS2 and migrate all volumes to NFS2 while we upgrade primary NFS,is it supported?

4 4

oVirt 3.6 Feature: Cumulative Network Usage Statistics
by Lior Vernia 01 Feb '15

01 Feb '15

Hello users and developers, Just put up a feature page for the aforementioned feature; in summary, to report total RX/TX statistics for hosts and VMs in oVirt. This has been requested several times on the users mailing list, and is especially useful for accounting in VDI deployments. You're more than welcome to review the feature page: http://www.ovirt.org/Features/Cumulative_RX_TX_Statistics Note that this only deals with network usage - it'll be great if we have similar features for CPU and disk usage! Yours, Lior.

3 6

Re: [ovirt-users] oVirt 3.5.1 user permissions
by Itamar Heim 01 Feb '15

01 Feb '15

On 01/29/2015 05:20 PM, Donny Davis wrote: > You are assigning permissions at too high of a level. > > Set the following permissions for users to be able to only see what they create > > Add a new set of permissions in the config menu > > > Login to system > Create instance > Attach to storage domains giving PowerUserRole at DC level is fastest/simplest way. if you need lower granularity then that, you need to give the PowerUserRole for specific clusters / storage domains / (networks?) (at the more granular level you can use DiskCreator/VmCreator(/VnicProfileUser?), but just using PowerUserRole is simplest. > > Then assign that permission at the datacenter level, or even better the cluster level > > And add permissions as needed > > I will get you some screen shots when I get home > > > > On Jan 29, 2015 7:13 AM, Yaniv Dary <ydary(a)redhat.com> wrote: >> >> WebAdmin is for admin and has permissions to see anything in the system. >> For power users please use the power user portal. >> >> On 01/29/2015 10:35 AM, Nikolai Bochev wrote: >>> Hello, >>> >>> I've been running ovirt hosted engine for around a month already >>> without any major interruptions. Last week i tied it to freeipa, to be >>> able to give permissions to other people, but so far no success >>> because of the following problem : >>> >>> All users can see all VM's. I tried clearing all permission entries ( >>> leaving the admin only ) and the re-adding and it didn't help at all. >>> >>> I am attaching a few screenshots to better describe : >>> >>> >>> >>> >>> >>> >>> Most of the vm's have no permissions attached to them, but they are >>> still visible to everyone that logs from the userpanel >>> What am i doing wrong ? >>> >>> Regards, >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> -- >> Yaniv Dary >> Red Hat Israel Ltd. >> 34 Jerusalem Road >> Building A, 4th floor >> Ra'anana, Israel 4350109 >> >> Tel : +972 (9) 7692306 >> 8272306 >> Email: ydary(a)redhat.com >> IRC : ydary >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

1 0

reverse lookup failure during overt engine configuration
by Faraday, Kriparam 31 Jan '15

31 Jan '15

--_000_D0F1754F1616Bkfaradayverisigncom_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hi, I am trying to configure ovirt(ver 3.5). The fqdn I provide during the step= "Host fully qualified DNS name of this server=94 is reverse resolvable. I = am able to verify that with nslookup of the IP address. But, I keep getting the following error: Host fully qualified DNS name of this server [localhost.localdomain]: xyz.x= yz.xyz.com [ ERROR ] Host name is not valid: The following addresses: 10.xx.xx.xx did = not reverseresolve into xyz.xyz.xyz.com How is ovirt-engine trying to reverse lookup the domain? If I know that, I = could probably fix the issue. Thanks, Kripa =93This message (including any attachments) is intended only for the use of= the individual or entity to which it is addressed, and may contain informa= tion that is non-public, proprietary, privileged, confidential and exempt f= rom disclosure under applicable law or may be constituted as attorney work = product. If you are not the intended recipient, you are hereby notified tha= t any use, dissemination, distribution, or copying of this communication is= strictly prohibited. If you have received this message in error, notify se= nder immediately and delete this message immediately.=94 --_000_D0F1754F1616Bkfaradayverisigncom_ Content-Type: text/html; charset="Windows-1252" Content-ID: <FA94EC580C44704B9A0087CA1BCA7549(a)verisign.com> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin= e-break: after-white-space; color: rgb(0, 0, 0); font-size: 14px; font-fami= ly: Calibri, sans-serif;"> <div>Hi,</div> <div>I am trying to configure ovirt(ver 3.5). The fqdn I provide during the= step "Host fully qualified DNS name of this server=94 is reverse reso= lvable. I am able to verify that with nslookup of the IP address. </di= v> <div><br> </div> <div>But, I keep getting the following error:</div> <div>Host fully qualified DNS name of this server [localhost.localdomain]: = xyz.xyz.xyz.com</div> <div>[ ERROR ] Host name is not valid: The following addresses: 10.xx.xx.xx= did not reverseresolve into xyz.xyz.xyz.com</div> <div><br> </div> <div>How is ovirt-engine trying to reverse lookup the domain? If I know tha= t, I could probably fix the issue.</div> <div><br> </div> <div>Thanks,</div> <div>Kripa</div> <h5><font color=3D"gray">=93This message (including any attachments) is int= ended only for the use of the individual or entity to which it is addressed= , and may contain information that is non-public, proprietary, privileged, = confidential and exempt from disclosure under applicable law or may be constituted as attorney work product. If yo= u are not the intended recipient, you are hereby notified that any use, dis= semination, distribution, or copying of this communication is strictly proh= ibited. If you have received this message in error, notify sender immediately and delete this message immedi= ately.=94 </h5> </font> </body> </html> --_000_D0F1754F1616Bkfaradayverisigncom_--

3 5

3.5 -> 3.5.1 upgrade issue
by Alan Murrell 31 Jan '15

31 Jan '15

I noticed I didn't have the reports installed, and thought in addition to installing thm I would upgrade my 3.5.0.1 installation to 3.5.1. I did a 'yum install engine-setup-dwh engine-setup-reports' and when those installed, I ran 'yum upgrade engine-setup'. This may have been my mistake. Anyway, once everything got downloaded and installed, I ran a screen session then ran 'engine-setup'. I answered the questions (leaving mostly the defaults) and let it go. The process usually gets to '[ INFO ] Deploying Jasper' then I lose my SSH session. No problem, I can just log right back in and connect to my screen session, right? Unfortunately, whatever causes my SSH session to drop also seems to kill my screen session, as there are none to be found. I cannot see anything useful in the logs for why the sessions got killed, but even after I lose the session, I can connect tot he webGUI, though it is still on 3.5.0.1 and if I click on the "Reports" link, it says the Reports module is not installed. I tried connecting to the console of the Engine (did I mention it is a self-hosted engine?), but the VNC connection cannot seem to connect, so I can't even run it from the console (even though the 'engine-setup' process shuts down the engine services, at least running it from the console should allow it to finish since it won't kill an SSH session) Any ideas on either what could be going on here and/or how to successfully run 'engine-setup'? Thanks! :-) -Alan

2 1

Foreman intergration
by Karli Sjöberg 30 Jan '15

30 Jan '15

Hey all! One thing I am keen on exploring is the Foreman/oVirt integration. I have a vision were that could be used to, as a first step, manage the updating/patching of the Hosts in our datacenter, and if that turns out successful, remove our current Puppet Dashboard as ENC in our main Puppet Master and trade it in for The Foreman. The flow I imagined was to have Foreman tell oVirt engine to set a Host in Maintenance, update all packages and reboot it, then when it´s back, put it back to Active and move on to the next Host. Is that something that´s been worked on? /K

1 0

Where can I get the ovirt-engine MIB?
by Nathanaël Blanchet 30 Jan '15

30 Jan '15

Hello, According to https://bugzilla.redhat.com/show_bug.cgi?id=1136818, we are now able to get snmtraps with the custom MIB. This thread provides the sample redhat MIB but where can I get the full ovirt-enfine mib txt file?

2 1

restore state is very long after suspending
by Nathanaël Blanchet 30 Jan '15

30 Jan '15

Hello, Suspending one vm (2 GB RAM) is quite short (about 1 minute) while restoring it is over 20 minutes... This make the suspend feature unusable. Is it a regular work? ovirt 3.5, el6 vdsm 4.16.

1 0