- Users - oVirt List Archives

Storage domain issue
by Koen Vanoppen 04 Dec '14

04 Dec '14

Dear All, After we updated our hypervisors to : vdsm-4.16.7-1.gitdb83943.el6.x86_64 vdsm-python-4.16.7-1.gitdb83943.el6.noarch vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el6.noarch vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-cli-4.16.7-1.gitdb83943.el6.noarch We don't have access to our storage domain anymore. He jsut doesn't see the disks anymore... I added the vdsm log and engine log. I'm clueless... BEfore he did see the storage domains, now after the system update he doesn't anymore... Thanks in advance, Kind regards, Koen

1 1

Re: [ovirt-users] ovirt-guest-agent on windows : what Python env. needed?
by Lev Veyde 04 Dec '14

04 Dec '14

Hi Nicolas, If the agent is compiled with py2exe (and as you got .exe files it means it was compiled with py2exe) then the executables are self contained, and you don't need to install Python separately in each VM. All you need is to download and install VC runtime, which you can download from here: http://www.microsoft.com/en-us/download/details.aspx?id=5582 That should resolve the issue. BTW, we have oVirt WGT (Windows Guest Tools) RPM, with ISO which contains the installer that will install the oVirt Guest Agent (including VC Runtime), as well as drivers etc. automatically for you. Thanks in advance, Lev Veyde. ----- Original Message ----- From: "Sandro Bonazzola" <sbonazzo(a)redhat.com> To: "Lev Veyde" <lveyde(a)redhat.com> Sent: Wednesday, December 3, 2014 1:49:00 PM Subject: Fwd: [ovirt-users] ovirt-guest-agent on windows : what Python env. needed? -------- Messaggio Inoltrato -------- Oggetto: [ovirt-users] ovirt-guest-agent on windows : what Python env. needed? Data: Wed, 03 Dec 2014 11:49:06 +0100 Mittente: Nicolas Ecarnot <nicolas(a)ecarnot.net> Organizzazione: Si peu... A: Users(a)ovirt.org <Users(a)ovirt.org> Hello, I read the following page : http://www.ovirt.org/OVirt_Guest_Agent_For_Windows and applied it on a server, and it ran very well. I obtained the two executables, copied them into "program files" according to the doc, along with the .ini as stated here : https://www.mail-archive.com/users@ovirt.org/msg18561.html - the "-install", the start, and the enabling went fine - rebooting the server runs OK too, and the agent is seen by oVirt What I don't understand is the following sentence of https://github.com/oVirt/ovirt-guest-agent/blob/master/ovirt-guest-agent/RE… "Optionally install py2exe if you want to build an executable file which doesn't require Python installation for running" As I don't know python at all, I thought this was building some sort of "self-executable" binary that I could copy-paste into another VM, and do the same install/enable/run. And WITHOUT installing any Python environnement. I'm sorry for such a weak question, but if this is not the case, does that mean I have to install a Pyhton env on each of my windows VMs? BTW, I tried to copy-paste the programfiles/guestagent... into another server, and when running the install, it gives a message [in french, :( ] L'application n'a pas pu démarrer car sa configuration côte-à-côte est incorrecte. That could be translated by : The application could not start because its side-by-side (?) config is incorrect. PS : Time is not anymore at launching windows_vs_linux war, but I just installed the guest agent on 17 _linux_ VMs in 3 minutes... -- Nicolas Ecarnot _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

2 1

Re: [ovirt-users] Hypervisor won't assign default gateway
by Aslam, Usman 03 Dec '14

03 Dec '14

--_000_EAAAA4A70A749B408A0B58DBB90543531174F881SSVMEXDAG01MB02_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I've worked around this issue by Flipping the DEFROUTE parameter on both vlans AND Adding "net_persistence =3D ifcfg" to "/etc/vdsm/vdsm.conf" I'm sure this isn't ideal but it works. If I update configuration using the= web UI, it requires me to manually edit and flip the DEFROUTE argument aga= in. Is there a way to control how this flag is setup? Thanks, Usman From: Aslam, Usman Sent: Wednesday, December 03, 2014 12:44 PM To: 'users(a)ovirt.org' Subject: Hypervisor won't assign default gateway I have a couple of bonded nics with two bridged vlans. Ovirtmgmt and Primar= y. Primary vlan also has a gateway setup (all using the ovirt UI). The gatewa= y shows up in the ifcfg file and I've added it to /etc/sysconfig/network as= well. Problem: Upon a reboot the default gateway does not show up (route -n) One thing did notice is that VDSM is inserting DEFROUTE=3Dno in ifcfg-primary And DEFROUTE=3Dyes in ifcfg-ovirtmgmt If is issue the "route add default gateway x.x.x.x" command, it starts work= ing as expected and the default route also shows up (route -n) Any ideas? Thanks, Usman --_000_EAAAA4A70A749B408A0B58DBB90543531174F881SSVMEXDAG01MB02_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">I’ve worked arou= nd this issue by<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Flipping the DEFROUTE = parameter on both vlans<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">AND<o:p></o:p></span><= /p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Adding “net_pers= istence =3D ifcfg” to “/etc/vdsm/vdsm.conf”<o:p></o:p></s= pan></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">I’m sure this is= n’t ideal but it works. If I update configuration using the web UI, i= t requires me to manually edit and flip the DEFROUTE argument again.<o:p></= o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Is there a way to cont= rol how this flag is setup?<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Thanks,<o:p></o:p></sp= an></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Usman<o:p></o:p></span= ></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <div> <div style=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in = 0in 0in"> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:&quot= ;Tahoma","sans-serif"">From:</span></b><span style=3D"font-s= ize:10.0pt;font-family:"Tahoma","sans-serif""> Aslam, U= sman <br> <b>Sent:</b> Wednesday, December 03, 2014 12:44 PM<br> <b>To:</b> 'users(a)ovirt.org'<br> <b>Subject:</b> Hypervisor won't assign default gateway<o:p></o:p></span></= p> </div> </div> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I have a couple of bonded nics with two bridged vlan= s. Ovirtmgmt and Primary.<o:p></o:p></p> <p class=3D"MsoNormal">Primary vlan also  has a gateway setup (all usi= ng the ovirt UI). The gateway shows up in the ifcfg file and I’ve add= ed it to /etc/sysconfig/network as well.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Problem: Upon a reboot the default gateway does not = show up (route -n)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">One thing did notice is that VDSM is inserting <o:p>= </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">DEFROUTE=3Dno      &nb= sp;           in ifcfg-pr= imary<o:p></o:p></p> <p class=3D"MsoNormal">And <o:p></o:p></p> <p class=3D"MsoNormal">DEFROUTE=3Dyes      &n= bsp;          in ifcfg-ovirtmg= mt<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">If is issue the “route add default gateway x.x= .x.x” command, it starts working as expected and the default route al= so shows up (route -n)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Any ideas?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks,<o:p></o:p></p> <p class=3D"MsoNormal">Usman<o:p></o:p></p> </div> </body> </html> --_000_EAAAA4A70A749B408A0B58DBB90543531174F881SSVMEXDAG01MB02_--

1 0

Hypervisor won't assign default gateway
by Aslam, Usman 03 Dec '14

03 Dec '14

--_000_EAAAA4A70A749B408A0B58DBB90543531174E155SSVMEXDAG01MB02_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have a couple of bonded nics with two bridged vlans. Ovirtmgmt and Primar= y. Primary vlan also has a gateway setup (all using the ovirt UI). The gatewa= y shows up in the ifcfg file and I've added it to /etc/sysconfig/network as= well. Problem: Upon a reboot the default gateway does not show up (route -n) One thing did notice is that VDSM is inserting DEFROUTE=3Dno in ifcfg-primary And DEFROUTE=3Dyes in ifcfg-ovirtmgmt If is issue the "route add default gateway x.x.x.x" command, it starts work= ing as expected and the default route also shows up (route -n) Any ideas? Thanks, Usman --_000_EAAAA4A70A749B408A0B58DBB90543531174E155SSVMEXDAG01MB02_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">I have a couple of bonded nics with two bridged vlan= s. Ovirtmgmt and Primary.<o:p></o:p></p> <p class=3D"MsoNormal">Primary vlan also  has a gateway setup (all usi= ng the ovirt UI). The gateway shows up in the ifcfg file and I’ve add= ed it to /etc/sysconfig/network as well.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Problem: Upon a reboot the default gateway does not = show up (route -n)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">One thing did notice is that VDSM is inserting <o:p>= </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">DEFROUTE=3Dno      &nb= sp;           in ifcfg-pr= imary<o:p></o:p></p> <p class=3D"MsoNormal">And <o:p></o:p></p> <p class=3D"MsoNormal">DEFROUTE=3Dyes      &n= bsp;          in ifcfg-ovirtmg= mt<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">If is issue the “route add default gateway x.x= .x.x” command, it starts working as expected and the default route al= so shows up (route -n)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Any ideas?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks,<o:p></o:p></p> <p class=3D"MsoNormal">Usman<o:p></o:p></p> </div> </body> </html> --_000_EAAAA4A70A749B408A0B58DBB90543531174E155SSVMEXDAG01MB02_--

1 0

Re: [ovirt-users] [ovirt-devel] hosted-engine setup/migration features for 3.6
by Yedidyah Bar David 03 Dec '14

03 Dec '14

----- Original Message ----- > From: "Bob Doolittle" <bob(a)doolittle.us.com> > To: "Yedidyah Bar David" <didi(a)redhat.com> > Sent: Wednesday, December 3, 2014 2:50:12 PM > Subject: Re: [ovirt-devel] hosted-engine setup/migration features for 3.6 > > Another issue with that page is that it assumes a remote database. I am not > sure what percentage of cases have remote databases but clearly many > (most?) do not, since that's not default behavior. I agree. > So that page definitely > needs attention. See: > https://bugzilla.redhat.com/show_bug.cgi?id=1099995 Indeed. Note that this isn't specific to hosted-engine, it's the same for any migration using engine-backup to backup/restore, therefore there is a link to its page in the top, where this is more detailed. We also have a bug [3] to automate this. [3] https://bugzilla.redhat.com/show_bug.cgi?id=1064503 > https://bugzilla.redhat.com/show_bug.cgi?id=1099998 > > Some of us have wanted to disable global maintenance upon bootup by adding > a systemd service on Fedora 20 (since you must enable global maintenance to > shut it down cleanly), and have found it impossible to create the necessary > systemd dependencies. It seems that (at least with 3.4) hosted-engine > --set-maintenance --mode=none will return an error for several seconds > after all other services have started and it's not clear what can be waited > upon in order to issue the command with assurance it will complete > successfully. This isn't strictly a setup/migration issue but it is an > issue with setting up a desired configuration with hosted-engine. The way > to reproduce this is simply to wait until gdm-greeter displays the login > prompt, ssh into the system and execute hosted-engine --set-maintenance > --mode=none and observe the error. Or create a systemd service that depends > upon (waits for) the latest-possible service, try executing the command > there, and observe the error. Ideally there would be some external > observable event which a systemd service could depend upon, when > hosted-engine is ready to do its thing. Adding Jiri for that. Do you have an open bug? Thanks, > > Regards, > Bob > > > On Wed, Dec 3, 2014 at 2:59 AM, Yedidyah Bar David <didi(a)redhat.com> wrote: > > > Hi all, > > > > We already have quite a lot of open ovirt-hosted-engine-setup bugs for 3.6 > > [1]. > > > > Yesterday I tried helping someone on irc who planned to migrate to > > hosted-engine > > manually, and without knowing (so it seems) that such a feature exists. He > > had > > an engine set up on a physical host, prepared a VM for it, and asked about > > migrating > > the engine to the VM. In principle this works, but the final result will > > be a > > hosted-engine, where the engine manages a VM the runs itself, without > > knowing it, > > and without HA. > > > > The current recommended migration flow is described in [2]. This page is > > perhaps > > a bit outdated, perhaps missing some details etc., but principally works. > > The main > > issue with it, AFAICT after discussing this a bit with few people, is that > > it > > requires a new clean host. > > > > I'd like to hear what people here think about such and similar flows. > > > > If you already had an engine and migrated to hosted-engine, what was good, > > what > > was bad, what would you like to change? > > > > If you plan such a migration, what do you find missing currently? > > > > [1] http://red.ht/1vle8Vv > > [2] http://www.ovirt.org/Migrate_to_Hosted_Engine > > > > Best, > > -- > > Didi > > _______________________________________________ > > Devel mailing list > > Devel(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/devel > > > -- Didi

1 1

Re: [ovirt-users] [ovirt-devel] hosted-engine setup/migration features for 3.6
by Bob Doolittle 03 Dec '14

03 Dec '14

Resending - inadvertently dropped CCs. On Wed, Dec 3, 2014 at 7:50 AM, Bob Doolittle <bob(a)doolittle.us.com> wrote: > Another issue with that page is that it assumes a remote database. I am > not sure what percentage of cases have remote databases but clearly many > (most?) do not, since that's not default behavior. So that page definitely > needs attention. See: > https://bugzilla.redhat.com/show_bug.cgi?id=1099995 > https://bugzilla.redhat.com/show_bug.cgi?id=1099998 > > Some of us have wanted to disable global maintenance upon bootup by adding > a systemd service on Fedora 20 (since you must enable global maintenance to > shut it down cleanly), and have found it impossible to create the necessary > systemd dependencies. It seems that (at least with 3.4) hosted-engine > --set-maintenance --mode=none will return an error for several seconds > after all other services have started and it's not clear what can be waited > upon in order to issue the command with assurance it will complete > successfully. This isn't strictly a setup/migration issue but it is an > issue with setting up a desired configuration with hosted-engine. The way > to reproduce this is simply to wait until gdm-greeter displays the login > prompt, ssh into the system and execute hosted-engine --set-maintenance > --mode=none and observe the error. Or create a systemd service that depends > upon (waits for) the latest-possible service, try executing the command > there, and observe the error. Ideally there would be some external > observable event which a systemd service could depend upon, when > hosted-engine is ready to do its thing. > > Regards, > Bob > > > On Wed, Dec 3, 2014 at 2:59 AM, Yedidyah Bar David <didi(a)redhat.com> > wrote: > >> Hi all, >> >> We already have quite a lot of open ovirt-hosted-engine-setup bugs for >> 3.6 [1]. >> >> Yesterday I tried helping someone on irc who planned to migrate to >> hosted-engine >> manually, and without knowing (so it seems) that such a feature exists. >> He had >> an engine set up on a physical host, prepared a VM for it, and asked >> about migrating >> the engine to the VM. In principle this works, but the final result will >> be a >> hosted-engine, where the engine manages a VM the runs itself, without >> knowing it, >> and without HA. >> >> The current recommended migration flow is described in [2]. This page is >> perhaps >> a bit outdated, perhaps missing some details etc., but principally works. >> The main >> issue with it, AFAICT after discussing this a bit with few people, is >> that it >> requires a new clean host. >> >> I'd like to hear what people here think about such and similar flows. >> >> If you already had an engine and migrated to hosted-engine, what was >> good, what >> was bad, what would you like to change? >> >> If you plan such a migration, what do you find missing currently? >> >> [1] http://red.ht/1vle8Vv >> [2] http://www.ovirt.org/Migrate_to_Hosted_Engine >> >> Best, >> -- >> Didi >> _______________________________________________ >> Devel mailing list >> Devel(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/devel >> > >

1 0

ovirt-guest-agent on windows : what Python env. needed?
by Nicolas Ecarnot 03 Dec '14

03 Dec '14

Hello, I read the following page : http://www.ovirt.org/OVirt_Guest_Agent_For_Windows and applied it on a server, and it ran very well. I obtained the two executables, copied them into "program files" according to the doc, along with the .ini as stated here : https://www.mail-archive.com/users@ovirt.org/msg18561.html - the "-install", the start, and the enabling went fine - rebooting the server runs OK too, and the agent is seen by oVirt What I don't understand is the following sentence of https://github.com/oVirt/ovirt-guest-agent/blob/master/ovirt-guest-agent/RE… "Optionally install py2exe if you want to build an executable file which doesn't require Python installation for running" As I don't know python at all, I thought this was building some sort of "self-executable" binary that I could copy-paste into another VM, and do the same install/enable/run. And WITHOUT installing any Python environnement. I'm sorry for such a weak question, but if this is not the case, does that mean I have to install a Pyhton env on each of my windows VMs? BTW, I tried to copy-paste the programfiles/guestagent... into another server, and when running the install, it gives a message [in french, :( ] L'application n'a pas pu démarrer car sa configuration côte-à-côte est incorrecte. That could be translated by : The application could not start because its side-by-side (?) config is incorrect. PS : Time is not anymore at launching windows_vs_linux war, but I just installed the guest agent on 17 _linux_ VMs in 3 minutes... -- Nicolas Ecarnot

1 0

supervdsmServer consumes 30% of host memory
by Demeter Tibor 03 Dec '14

03 Dec '14

------=_Part_670523_2123662085.1417548535072 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, We have a productive ovirt 3.5 cluster with 3 nodes. The first node has 40 gb of memory and running only one VM that use 8 gb of ram. But the supervdsmserver consumes 20% of host memory. On the second node has 32 GB of memory with 5 VMs. On this node the supervdsmserver using 30%(!) of memory! On the node3 there are 6 VMs with 72 GB of memory. But the supervdsm server use only 1.7% of memory. Does anyone know why? [root@node0 ~]# ps aux|grep supervdsmServer root 19549 0.2 20.8 26248348 8594352 ? S<l 06:00 1:59 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid [root@node1 ~]# ps aux|grep supervdsmServer root 32701 1.2 29.5 32463704 9717368 ? S<l 03:59 12:08 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid [root@node2 ~]# ps aux|grep supervdsmServer root 4613 0.0 1.7 6340572 1291476 ? S<l 18:26 0:04 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid Thanks in advance Tibor ------=_Part_670523_2123662085.1417548535072 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: times new roman, new york, times, se= rif; font-size: 12pt; color: #000000"><div>Hi,</div><div><br></div><div>We = have a productive ovirt 3.5 cluster with 3 nodes.</div><div><br></div><div>= The first node has 40 gb of memory and running only one VM that use 8 gb of= ram.</div><div>But the supervdsmserver consumes 20% of host memory.</div><= div>On the second node has 32 GB of memory with 5 VMs. On this node the sup= ervdsmserver using 30%(!) of memory!</div><div>On the node3 there are 6 VMs= with 72 GB of memory. But the supervdsm server use only 1.7% of memory.</d= iv><div><br></div><div>Does anyone know why?</div><div><br></div><div><br><= /div><div><p style=3D"margin: 0px;" data-mce-style=3D"margin: 0px;">[root@n= ode0 ~]# ps aux|grep supervdsmServer<br>root 19549 0.2 20.8 26248348 859435= 2 ? S<l 06:00 1:59 /usr/bin/python /usr/share/vdsm/supervdsmServer --soc= kfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid<br></= p><p style=3D"margin: 0px;" data-mce-style=3D"margin: 0px;"><br></p><p styl= e=3D"margin: 0px;" data-mce-style=3D"margin: 0px;">[root@node1 ~]# ps aux|g= rep supervdsmServer<br>root 32701 1.2 29.5 32463704 9717368 ? S<l 03:59 = 12:08 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/v= dsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid</p><p style=3D"margin= : 0px;" data-mce-style=3D"margin: 0px;"><br></p><p style=3D"margin: 0px;" d= ata-mce-style=3D"margin: 0px;">[root@node2 ~]# ps aux|grep supervdsmServer<= br>root 4613 0.0 1.7 6340572 1291476 ? S<l 18:26 0:04 /usr/bin/python /u= sr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile= /var/run/vdsm/supervdsmd.pid<br><span style=3D"font-size: 12pt;"></span></= p><p style=3D"margin: 0px;" data-mce-style=3D"margin: 0px;"><span style=3D"= font-size: 12pt;"><br></span></p><p style=3D"margin: 0px;" data-mce-style= =3D"margin: 0px;"><span style=3D"font-size: 12pt;">Thanks in advance</span>= </p><p style=3D"margin: 0px;" data-mce-style=3D"margin: 0px;"><br></p><p st= yle=3D"margin: 0px;" data-mce-style=3D"margin: 0px;">Tibor</p><p style=3D"m= argin: 0px;" data-mce-style=3D"margin: 0px;"><br></p></div><div><span name= =3D"x"></span><p style=3D"font-family: 'Times New Roman'; font-size: medium= ; margin: 0px;" data-mce-style=3D"font-family: 'Times New Roman'; font-size= : medium; margin: 0px;"><strong><span style=3D"font-size: medium;" data-mce= -style=3D"font-size: medium;"><span size=3D"5" color=3D"#2D67B0" style=3D"c= olor: rgb(45, 103, 176);" data-mce-style=3D"color: #2d67b0;"></span></span>= </strong></p></div></div></body></html> ------=_Part_670523_2123662085.1417548535072--

4 3

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status
by Sandro Bonazzola 03 Dec '14

03 Dec '14

Hi, We're going to start composing oVirt 3.5.1 RC on *2014-12-09 08:00 UTC* from 3.5 branch. In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-12-08 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-12-08 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. - Please provide an ETA for the pending blockers as soon as possible. Infra: - Please check Jenkins status for 3.5 jobs and sync with relevant maintainers if there are issues. There are still 68 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 45 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Replace Crashed Server
by Punit Dambiwal 03 Dec '14

03 Dec '14

Hi, I have the following architecture :- 1. 4*Ovirt Host node with gluster (Distributed replicated storage...replica=2)..with 8 bricks on each server i.e I am using same host for compute as well as storage purpose... My question is if any day one of my node completely dead...and seems i have one spare node with same configuration and disk space.... 1. How i can replaced this new host with failed host... 2. How the gluster bricks replaced ?? I found one url http://gluster.org/community/documentation/index.php/Gluster_3.2:_Brick_Res… But what the OVirt side...because every node has it's own key and UUID... Thanks, Punit

1 0