- Users - oVirt List Archives

oVirt Nested Virtualization
by Markus Schaufler 13 Dec '18

13 Dec '18

Hi! I'd like to try the HCI Rollout https://ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyper… on my oVirt Infrastructure. The hosts have "nested virtualization" active, but when starting the Hosted Engine deployment from cockpit an the error "Hardware virtualization is not supported on this host" occurs. cat /sys/module/kvm_intel/parameters/nested Y Any ideas on this?

4 7

Not able to install HostedEngine
by Stefan Wolf 13 Dec '18

13 Dec '18

Hello, i like to setup a complete new cluster I install the version 4.2.1.7 I set up ip during installation process After reboot I enable by changing /etc/sysconfig/network-scripts/ifcfg-ens1f0 from ONBOOT=no to yes Than I try to install hosted-engine as described here: https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_… I prepare the installation process with yum install ovirt-engine-appliance then i 've tried both variants grafical installation with cockpit and the cli after setting up the network, the network is no longer working and the installtion will break everything seems fine but network isn't running a reboot will not help thx stefan [image: image.png]

1 0

Ovirt 4.3 Alpha AMD 2970WX Windows VM creation and NUMA
by Darin Schmidt 13 Dec '18

13 Dec '18

Not sure if Users is the best place for this as Im using 4.3 to test support for my AMD 2970WX Threadripper but While trying to setup a Windows VM, it fails. I have a working CentOS 7 running. Heres what I get when I try to startup the VM. VM Windows-Darin is down with error. Exit message: internal error: process exited while connecting to monitor: WARNING: Image format was not specified for '/dev/sg0' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. 2018-12-02T18:43:05.358741Z qemu-kvm: warning: CPU(s) not present in any NUMA nodes: CPU 10 [socket-id: 10, core-id: 0, thread-id: 0], CPU 11 [socket-id: 11, core-id: 0, thread-id: 0], CPU 12 [socket-id: 12, core-id: 0, thread-id: 0], CPU 13 [socket-id: 13, core-id: 0, thread-id: 0], CPU 14 [socket-id: 14, core-id: 0, thread-id: 0], CPU 15 [socket-id: 15, core-id: 0, thread-id: 0] 2018-12-02T18:43:05.358791Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future 2018-12-02T18:43:05.359052Z qemu-kvm: can't apply global EPYC-x86_64-cpu.hv-synic=on: Property '.hv-synic' not found. NUMA doesnt seem to resolve the issue any even if I set NUMA to be 1 and place it on a NUMA that has 12 cores and 64GB ram. I also dont fully understand NUMA because it creates 4 NUMA sockets even though technically there should be 2 correct? I dont get how NUMA is setup, but either way it doesnt help resolve any issues. [root@ovirt ~]# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 24 25 26 27 28 29 node 0 size: 65429 MB node 0 free: 54322 MB node 1 cpus: 12 13 14 15 16 17 36 37 38 39 40 41 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: 6 7 8 9 10 11 30 31 32 33 34 35 node 2 size: 32754 MB node 2 free: 27699 MB node 3 cpus: 18 19 20 21 22 23 42 43 44 45 46 47 node 3 size: 0 MB node 3 free: 0 MB node distances: node 0 1 2 3 0: 10 16 16 16 1: 16 10 16 16 2: 16 16 10 16 3: 16 16 16 10 link to my messages and vdsm log https://drive.google.com/open?id=1v-Wjcj7xLZIcR2GKR-P659yE14r1-hsz https://drive.google.com/open?id=1BHvcS2Dgan68hQkVdOmme1gP1ciSsejL

3 6

removal of 3 vdsm hooks
by Dan Kenigsberg 13 Dec '18

13 Dec '18

I've identified 3 ancient vdsm-hooks that have been obsoleted by proper oVirt features. vdsm-hook-isolatedvlan: obsoleted in ovirt-4.2.6 by clean-traffic-gateway filter https://gerrit.ovirt.org/#/q/I396243e1943eca245ab4da64bb286da19f9b47ec vdsm-hook-qos: obsoleted in ovirt-3.3 by https://www.ovirt.org/documentation/sla/network-qos/ vdsm-hook-noipspoof: obsoleted in ovirt-4.0 by choosing the "clean-traffic" filter https://ovirt.org/feature/networkfilter I would like to remove this code from vdsm-4.30, destined for ovirt-4.3. Is there any objection for that? Is anybody still using them? Regards, Dan.

3 3

4.2.7 & centos 7.6 dependency problems
by Demeter Tibor 13 Dec '18

13 Dec '18

Dear All, I would like to upgrade my ovirt 4.2.5 to 4.2.7. The hosted engine upgrade was success, but on the nodes i've got an dependency error: ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: mesa-libgbm-18.0.5-3.el7.x86_64 --> Processing Dependency: libwayland-server.so.0()(64bit) for package: mesa-libgbm-18.0.5-3.el7.x86_64 ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed --> Running transaction check ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution --> Running transaction check ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 Available: nbdkit-1.2.6-1.el7.x86_64 (base) nbdkit(x86-64) = 1.2.6-1.el7 Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) nbdkit(x86-64) = 1.2.6-1.el7_6.2 Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) nbdkit(x86-64) = 1.2.7-2.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I solve this? Thanks in advance, Regards, Tibor

4 6

Network Setup after ovirt node Install and before add node to cluster
by Stefan Wolf 12 Dec '18

12 Dec '18

Hello, I ve downloaded an installed OVIRT NODE 4.2.7.1. During the installation I ‘ve setup a static ip (I ‘ve also tried dhcp, both work) The installation passes and after the reboot ovirt node starts without any problems. BUT the network is not configured. I know https://www.ovirt.org/documentation/install-guide/chap-oVirt_Nodes/ and I know https://www.ovirt.org/documentation/admin-guide/chap-Hosts/ and now I am between these two documents oVirt is installed but network is not configured to add it to datacenter of course I know the scripts under /etc/sysconfig/network-scripts do I really have do edit it manuel? if I change ip in command line ip a add … dev.. and ip route add … it fails to add node to datacenter - with one of the last version I ‘ve added the IP address in bash - added the host to datacenter, - after reboot readd the ip address in bash after reboot - an then I could change network settings in oVirt Manger What is best practices for adding a node to datacenter when the ip address is not assigned after installation Thx shb

5 5

Ovirt Maximums
by Brian Wilson 12 Dec '18

12 Dec '18

Is there a resource available that would describe the configurable maximums for the Ovirt Engine and Ovirt Nodes. Things like: How many Logical Networks per host? If one does not exist does anyone have any experiences with reaching limits that caused issues specifically with regards to the number of networks on hosts.

2 2

Ovirt Node Installation issue on Ovirt 4.2
by Hemant Gupta 12 Dec '18

12 Dec '18

Hi, I have downloaded the ISO on physical server but I am unable to attach to my ovirt engine as it showing vdsm error but during update on CentosOS launched with ISO its giving below : [root@r yum.repos.d]# sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, vdsmupgrade Examining /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: ovirt-release42-4.2.7-1.el7.noarch /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: does not update installed package. Error: Nothing to do Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id Cannot upload enabled repos report, is this client registered?

1 0

Configuring Gluster Hyperconverged on Cloud
by pawan.ratwani＠tcs.com 11 Dec '18

11 Dec '18

Hi, I would like to do hands-on on Gluster Hyperconverged environment, and as per my understanding compute and storage has to be on the same hosts. Since I don't have physical infra to support such configuration, I would like to setup 3-node cluster on Cloud e.g. AWS, or Azure. I would like to know if I create an EC2 instance on AWS (or on Azure) with the desired Compute, Storage and Network capacity, is Gluster-hyperconverged cluster setup supported for such deployment ? I am referring https://www.ovirt.org/documentation/gluster-hyperconverged/ for this. Thanks.

2 1

[ANN] oVirt 4.2.8 Second Release Candidate is now available
by Sandro Bonazzola 11 Dec '18

11 Dec '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.8 Second Release Candidate, as of December 11th, 2018. This update is a release candidate of the eighth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node will be available soon due to build issues causing a delay [2] Additional Resources: * Read more about the oVirt 4.2.8 release highlights: http://www.ovirt.org/release/4.2.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.8/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0