- Users - oVirt List Archives

Re: hosted engine setup error
by dhy336＠sina.com 27 May '18

27 May '18

Hi thanks for your reponse, I try to do by your guide, but it is not work. my kernel version is 3.10.0-693.11.1.el7.x86_64.besides, I try to do hosted-engine --deploy in my Virtual machine is work. but it is not work in Physical Machine ----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted engine setup error Date: 2018-05-24 18:35 Hi There is a BZ with a similar issue: https://bugzilla.redhat.com/show_bug.cgi?id=1546839 To sum things up, try stopping the network manager and restarting your network if you are using a RH distribution, e,g. : systemctl stop NetworkManager systemctl restart networkAnd check what is your kernel version. On Wed, May 23, 2018 at 5:03 PM, <dhy336(a)sina.com> wrote: hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources vdsm.log 2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908) [root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

2 1

Upload Image Error
by Peter Harman 27 May '18

27 May '18

Ovirt Users, I am running into a strange problem with uploading images through the webUI. When I test the connection on an upload I get “Connection to ovirt-imageio-proxy service has failed. Make sure the service is installed, configured, and ovirt-engine certificate is registered as a valid CA in the browser.” I have conducted this operation on several computers using both chrome and firefox and ensuring the certs were loaded into the browsers. I went to this page: https://ovirt.org/develop/release-management/features/infra/pki/ to find cert info and checked both the engine and hosts for the certificates and the identity of the certificates - everything seemed to match up. Next thing I looked at was the ovirt-imageio-proxy service. I checked it and restarted it below is a status output from one of the failed operations: [root@hpm-engine ~]# systemctl status ovirt-imageio-proxy ● ovirt-imageio-proxy.service - oVirt ImageIO Proxy Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-proxy.service; enabled; vendor preset: disabled) Active: active (running) since Thu 2018-05-24 13:25:38 CDT; 1h 13min ago Main PID: 21239 (ovirt-imageio-p) Tasks: 2 CGroup: /system.slice/ovirt-imageio-proxy.service └─21239 /usr/bin/python /usr/bin/ovirt-imageio-proxy May 24 13:25:38 hpm-engine.server.local systemd[1]: Starting oVirt ImageIO Proxy... May 24 13:25:38 hpm-engine.server.local systemd[1]: Started oVirt ImageIO Proxy. May 24 14:38:02 hpm-engine.server.local ovirt-imageio-proxy[21239]: 127.0.0.1 - - [24/May/2018 14:38:02] "PUT /tickets/ HTTP/1.1" 200 0 ovirt-imageio-proxy service seems to check out. So, next step was checking out VDSM process output is below (NOTE: I redacted a bunch of unrelated warnings): [root@mothership ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2018-05-24 08:12:40 CDT; 6h ago Main PID: 3359 (vdsmd) Tasks: 58 CGroup: /system.slice/vdsmd.service ├─3359 /usr/bin/python2 /usr/share/vdsm/vdsmd └─6731 /usr/libexec/ioprocess --read-pipe-fd 68 --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10 So VDSM doesn’t seem to be the issue. I changed a few settings here and there but mostly forget what I did (I changed it all back to defult) Some background information - I am using /etc/hosts for all the FQDN components - which seems to be working well. I checked the times to be sure the time matched up (I know this important for some security related issues.) In a somewhat funny note I disabled SSL on VDSM in one attempt at the issue and now know why you should not do that when engine is using SSL. Any help is appreciated. I am learning a lot and really thank everyone who develops Ovirt - it’s awesome. Peter Harman - Systems and Safety Cordinator | Homeyer Precision Manufacturing [Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] 16051 State Hwy 47, Marthasville, MO 63357| E pharman(a)homeyertool.com |<mailto:pharman@homeyertool.com%20%7C> P 636.433.2244 | F 636.433.5257

3 3

Failing to install self hosted engine - 4.2.4
by Maton, Brett 26 May '18

26 May '18

Hi, I can't see in the log what the problem is, I expect it's something simple though... Hoping that someone can see what the problem is. engine setup log attached. Regards, Brett

2 1

Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
by Karli Sjöberg 26 May '18

26 May '18

1 0

hosted engine deploy failed , engine vm is shudown
by dhy336＠sina.com 26 May '18

26 May '18

Hi I deploy hosted engine face some errors.[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004175", "end": "2018-05-26 17:41:11.892218", "rc": 0, "start": "2018-05-26 17:41:11.888043", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir] I find when hosted-engine -deloy run [Get ovirtmgmt route table id], my enginen VM is shutdown,and /var/log/message show my engine vm is powered down by guest-shutdown, May 26 09:32:23 engine systemd: Reloading.May 26 09:32:24 engine python: ansible-file Invoked with directory_mode=None force=False remote_src=None path=/root/heanswers.conf owner=None follow=False group=None unsafe_writes=None state=absent content=NOT_LOGGING_PARAMETER serole=None diff_peek=None setype=None selevel=None original_basename=None regexp=None validate=None src=None seuser=None recurse=False delimiter=None mode=None attributes=None backup=NoneMay 26 09:32:38 engine systemd-logind: Removed session 3.May 26 09:32:48 engine qemu-ga: info: guest-shutdown called, mode: powerdownMay 26 09:32:48 engine systemd: Started Delayed Shutdown Service.May 26 09:32:48 engine systemd: Starting Delayed Shutdown Service...May 26 09:32:48 engine systemd-shutdownd: Shutting down at Sat 2018-05-26 17:32:48 CST (poweroff)...May 26 09:32:48 engine systemd-shutdownd: Creating /run/nologin, blocking further logins...May 26 09:32:48 engine systemd: Stopping QEMU Guest Agent...May 26 09:32:48 engine systemd: Stopping Session 1 of user root.May 26 09:32:48 engine systemd: Stopped target Multi-User System.May 26 09:32:48 engine systemd: Stopping Multi-User System.May 26 09:32:48 engine systemd: Stopped Execute cloud user/final scripts.May 26 09:32:48 engine systemd: Stopping Execute cloud user/final scripts...May 26 09:32:48 engine systemd: Stopping oVirt Engine...May 26 09:32:48 engine sshd[24523]: Received signal 15; terminating.May 26 09:32:48 engine systemd: Stopping OpenSSH server daemon...May 26 09:32:48 engine systemd: Stopping The Apache HTTP Server...

1 0

Problems with configuring ovirt and neotron network integration
by Pym 25 May '18

25 May '18

Hi: Environmental information： 4.2.0 ovirt version, according to "https://www.ovirt.org/documentation/how-to/networking/overlay-networks-with…" document of it services. Both services are accessible from the browser. After the above environment is configured according to the document, I need to execute the following command "engine-config --set keyauthstoneurl =http://< host-fqdn >:35357/v2.0" on the ovirt-engine side. The following information appears: "Error setting KeystoneAuthUrl's value. No such entry." When I execute "engine-config-a | grep-i 'KeystoneAuthUrl'", there is no return value, and there is no such configuration item in the current version of ovirt. Now how do I proceed next? Thanks！

1 0

hosted-engine 4.2.3.7-1 "engine-setup"
by femi adegoke 25 May '18

25 May '18

This is oVirt 4.2.3 + Gluster. I ran yum -y update on the hosted engine. It installed 1 package & upgraded 16. Is it necessary to run "engine-setup" again after the yum update?

2 1

Hosted Engine failed
by shamilkpm＠gmail.com 25 May '18

25 May '18

I am hosting ovirt node as VM under VMware. when try to run engine setup, it getting fails and error [ INFO ] TASK [Create cloud init user-data and meta-data files] [ INFO ] TASK [Create ISO disk] [ INFO ] changed: [localhost] [ INFO ] TASK [Create local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Get local VM IP] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3E:6A:7A:F9 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.095336", "end": "2018-05-25 00:52:21.390980", "rc": 0, "start": "2018-05-25 00:52:21.295644", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} ANYONE CAN HELP ME ?? -SHAMZ

2 1

oVirt 4.2 host actions dropdown truncated
by Gianluca Cecchi 25 May '18

25 May '18

example of full list in oVirt 4.2.3.5 with only one host https://drive.google.com/file/d/12fj3uorno9UjBL_aNQOG0mUSqEFn-Ol4/view?usp=… example of truncated list in oVirt 4.2.3.7 with 3 hosts https://drive.google.com/file/d/1Es3YSAhcB_L-feaHdkAvwZz8BTB3sYiS/view?usp=… if I select with the mouse into the column and then scroll with mouse, I can see also the items below in the list: STOP, SSH MANAGEMENT, ecc. but all in all it seems counter-intuitive to me... I think the .5 vs the .7 in version is not the culprit. Anyone can reproduce? BTW: I reproduced the same strange behavior also in an RHV environment with latest 4.2 (updated yesterday), with two hosts. Any comments? Gianluca

2 1

[ANN] oVirt 4.2.4 First Release Candidate is now available
by Sandro Bonazzola 24 May '18

24 May '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.4 First Release Candidate, as of May 24th, 2018 This update is a release candidate of the fourth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later Due to an issue with CentOS mirrors oVirt Node has not been built. We'll build and release oVirt Node as soon as the updated qemu-kvm-ev will be available on CentOS mirrors. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is not yet available, will be provided soon[2] Additional Resources: * Read more about the oVirt 4.2.4 release highlights: http://www.ovirt.org/release/4.2.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.4/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://redhat.com/summit>

2 3