- Users - oVirt List Archives

Host install failed - cannot set maintenance or remove
by Callum Smith 13 May '18

13 May '18

Dear All, There appears to be an issue with the host install on these, there's quite a lot of errors being kicked out into the logs as they cycle through attempting to activate, failing, and then failing to go into maintenance. I can't remove the hosts from the engine to attempt to reinstall them. Issue presented from having a statically configured network on the ovritmgmt network on the hosts before running the host install. There are SQL errors (FK missing) and assorted goodness in there. Any help greatly appreciated, not sure what the next step forward is from here Engine.log on dropbox: https://www.dropbox.com/s/82iem0ov869yh32/engine.log-20180508.zip?dl=0 Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

2 2

oVirt 4.2 Upgrade
by KSNull Zero 13 May '18

13 May '18

Hello! Let's assume that we have 2 clusters in a shared Datacenter running version 4.1. Is it possible to have one cluster running v4.2 and another one running v4.1 in the same Datacenter (what version will it be, by the way ?) during transitioning to oVirt 4.2 ? Thank you.

2 1

Unsubscribe
by Shashwat shagun 13 May '18

13 May '18

Admin I had unsubscribed from ovirt months ago. Why am I subscribed again?

3 2

repo issues
by Fernando Fuentes 13 May '18

13 May '18

I am trying to upgrade my ovirt cluster and came across a repo 404. http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repom…: [Errno 14] HTTP Error 404 - Not Found Trying other mirror. Any ideas how to fix it? TIA! -- Fernando Fuentes ffuentes(a)darktcp.net

2 1

routing
by Justin Zygmont 13 May '18

13 May '18

--_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I don't understand why you would want this unless the ovirtnode itself was = actually the router, wouldn't you want to only have an IP on the management= network, and leave the rest of the VLANS blank so they depend on the route= r to route the traffic: NIC1 -> ovirt-mgmt - gateway set NIC2 -> VLAN3, VLAN4, etc... https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/ Viewing or Editing the Gateway for a Logical Network Users can define the gateway, along with the IP address and subnet mask, fo= r a logical network. This is necessary when multiple networks exist on a ho= st and traffic should be routed through the specified network, rather than = the default gateway. If multiple networks exist on a host and the gateways are not defined, retu= rn traffic will be routed through the default gateway, which may not reach = the intended destination. This would result in users being unable to ping t= he host. oVirt handles multiple gateways automatically whenever an interface goes up= or down. --_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I don’t understand why you would want this unl= ess the ovirtnode itself was actually the router, wouldn’t you want t= o only have an IP on the management network, and leave the rest of the VLAN= S blank so they depend on the router to route the traffic:<o:p></o:p> <o:p> </o:p> NIC1  -> ovirt-mgmt  - gateway set<o:p>= </o:p> NIC2  -> VLAN3, VLAN4, etc…<o:p></o:p>= <o:p> </o:p> <o:p> </o:p> <a href=3D"https://www.ovirt.org/documentation/admin= -guide/chap-Logical_Networks/">https://www.ovirt.org/documentation/admin-gu= ide/chap-Logical_Networks/</a><o:p></o:p> <o:p> </o:p> Viewing or Editing the Gateway for a Logical Network<o:p></= o:p> Users can define the gateway, along with the IP address and su= bnet mask, for a logical network. This is necessary when multiple networks exist on a host and traffic should be routed throug= h the specified network, rather than the default gateway.<o:p></o:p>= If multiple networks exist on a host and the gateways are not = defined, return traffic will be routed through the default gateway, which may not reach the intended destination. This would = result in users being unable to ping the host.<o:p></o:p> oVirt handles multiple gateways automatically whenever an inte= rface goes up or down.<o:p></o:p> <o:p> </o:p> <o:p> </o:p> </div> </body> </html> --_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_--

2 5

4.2.3 -- No Snapshot Restore on GUI?
by mrnervus＠gmail.com 13 May '18

13 May '18

Struggling to identify where on the GUI I can navigate to in order to perform a snapshot restore. Is this functionality not available anymore?

1 0

Is PostgreSQL 9.5 required now as of oVirt 4.2?
by Lacey Powers 13 May '18

13 May '18

Hi All, I have a setup of oVirt on 4.1 that has been working brilliantly for over a year, serving the production workloads at my dayjob without complaint. Originally, I had set it up with a custom PostgreSQL version, 9.6, from the PGDG repositories, since the suggested 9.2 was already quite old, and it allowed me to keep consistent versions of PostgreSQL across all the infrastructure I have. Now that I am trying to upgrade to oVirt 4.2, when I run engine-setup per the directions in the release notes documentation, engine-setup insists on PostgreSQL 9.5 from Software Collections, comparing the postgresql versions and then aborting. I don't see a way to tell it that I have a different running version of PostgreSQL that's greater than 9.5 already. Does this mean that no other versions than 9.5 are supported, and I need to downgrade and use the Software Collections version exclusively? Or is there a custom setting that I am missing that will enable me to continue using the 9.6 install I already have. Thank you for your time. Best, Lacey

2 2

Hosted Engine dependency issue
by Peter Harman 12 May '18

12 May '18

Hello, I am new to Ovirt (and linux) , I successfully installed a working hosted engine twice but am now running into a dependency issue. I keep getting the below message: Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged-iscsi >= 2.1.1 Available: storaged-iscsi-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-iscsi = 2.5.2-2.el7 Available: storaged-iscsi-2.5.2-4.el7.x86_64 (extras) storaged-iscsi = 2.5.2-4.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged >= 2.1.1 Available: storaged-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged = 2.5.2-2.el7 Available: storaged-2.5.2-4.el7.x86_64 (extras) storaged = 2.5.2-4.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged-lvm2 >= 2.1.1 Available: storaged-lvm2-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-lvm2 = 2.5.2-2.el7 Available: storaged-lvm2-2.5.2-4.el7.x86_64 (extras) storaged-lvm2 = 2.5.2-4.el7 I wiped the machine and tried again with no luck. Does anybody know what I am doing wrong? Peter Harman - Systems and Safety Cordinator | Homeyer Precision Manufacturing [Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] 16051 State Hwy 47, Marthasville, MO 63357| E pharman(a)homeyertool.com |<mailto:pharman@homeyertool.com%20%7C> P 636.433.2244 | F 636.433.5257

2 1

ONN v4.2.3 Hosted Engine Deployment - Auto addition of Gluster Hosts
by glenn.farmer＠netfortris.com 12 May '18

12 May '18

The new Ovirt Node installation script in v4.2.3 automatically adds the gluster hosts after initial hosted engine setup. This caused major problems as I had used different FQDNs on a different VLAN to initially setup my gluster nodes [to isolate storage traffic] - but then put them onto the "ovirtmgmt" network. Because they were gluster nodes - I could not remove them from the ovirtmgmt network to re-install on the proper management VLAN. I recommend removing the auto-installation of the other gluster nodes - or at least provide an option to decline the automatic addition of the other nodes.

2 1

unable to upgrade Centos 7.5 due to ovirt package dependencies
by Vineet Khandpur 11 May '18

11 May '18

Hello. Attempting to upgrade our ovirt hypervisors, getting the following error: --> Finished Dependency Resolution Error: Package: cockpit-storaged-160-1.el7.centos.noarch (@extras) Requires: storaged-iscsi >= 2.1.1 Removing: storaged-iscsi-2.5.2-4.el7.x86_64 (@extras) storaged-iscsi = 2.5.2-4.el7 Obsoleted By: udisks2-iscsi-2.7.3-6.el7.x86_64 (base) Not found Available: storaged-iscsi-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-iscsi = 2.5.2-2.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (@extras) Requires: storaged-lvm2 >= 2.1.1 Removing: storaged-lvm2-2.5.2-4.el7.x86_64 (@extras) storaged-lvm2 = 2.5.2-4.el7 Obsoleted By: udisks2-lvm2-2.7.3-6.el7.x86_64 (base) Not found Available: storaged-lvm2-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-lvm2 = 2.5.2-2.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (@extras) Requires: storaged >= 2.1.1 Removing: storaged-2.5.2-4.el7.x86_64 (@extras) storaged = 2.5.2-4.el7 Obsoleted By: udisks2-2.7.3-6.el7.x86_64 (base) Not found Available: storaged-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged = 2.5.2-2.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Would like to avoid using the --skip-broken option. Does the dependency for the various storaged packages need to be updated to instead require udisks2? Thanks. vk -------------------------------- Vineet Khandpur UNIX System Administrator Information Technology Services University of Alberta Libraries +1-780-492-4718

1 0