- Users - oVirt List Archives

VMs hang periodically: gluster problem?
by Diego Ercolani 22 Sep '22

22 Sep '22

Hello, I have a cluster made by 3 nodes in a "self-hosted-engine" topology. I implemented the storage with gluster implementation in 2 replica + arbiter topology. I have two gluster volumes glen - is the volume used by hosted-engine vm gv0 - is the volume used by VMs The physical disks are 4TB SSD used only to accomodate VMs (also hosted-engine) I have continuos VMs hangs, even hosted-engine, this give full of troubles as I have continuous hangs by hosted-engine and this happen asyncrounosly even while there is management operation on VMs (mobility, cloning...) after a while it happens that the VM is freed but in the VMs I have in console kernel complaining by CPU hang or timer hangs and the solution is only to shutdown/poweroff the VM... even hosted engine in fact it happens that hosted-engine -vm-status give "state=EngineUpBadHealth" This is the log during the event in the host while there is the event: Sep 01 07:48:58 ovirt-node3.ovirt NetworkManager[1923]: <info> [1662018538.0166] device (vnet73): state change: activated -> unmanaged (reason 'unmanaged', sys-iface-state: 'removed') Sep 01 07:48:58 ovirt-node3.ovirt NetworkManager[1923]: <info> [1662018538.0168] device (vnet73): released from master device ovirtmgmt Sep 01 07:48:58 ovirt-node3.ovirt libvirtd[2496]: Unable to read from monitor: Connection reset by peer Sep 01 07:48:58 ovirt-node3.ovirt libvirtd[2496]: internal error: qemu unexpectedly closed the monitor: 2022-09-01T07:48:57.930955Z qemu-kvm: -device virtio-blk-pci,iothread=iothread1,bus=pci.6,addr=0x0,drive=libvirt-1-format,id=ua-0a1a501c-fc45-430f-bfd3-076172cec406,bootindex=1,write-cache=on,serial=0a1a501c-fc45-430f-bfd3-076172cec406,werror=stop,rerror=stop: Failed to get "write" lock Is another process using the image [/run/vdsm/storage/3577c21e-f757-4405-97d1-0f827c9b4e22/0a1a501c-fc45-430f-bfd3-076172cec406/f65dab86-67f1-46fa-87c0-f9076f479741]? Sep 01 07:48:58 ovirt-node3.ovirt kvm[268578]: 5 guests now active Sep 01 07:48:58 ovirt-node3.ovirt systemd[1]: machine-qemu\x2d67\x2dHostedEngine.scope: Succeeded. Sep 01 07:48:58 ovirt-node3.ovirt systemd-machined[1613]: Machine qemu-67-HostedEngine terminated. Sep 01 07:49:08 ovirt-node3.ovirt systemd[1]: NetworkManager-dispatcher.service: Succeeded. Sep 01 07:49:08 ovirt-node3.ovirt ovirt-ha-agent[3338]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Engine VM stopped on localhost Sep 01 07:49:14 ovirt-node3.ovirt vdsm[3335]: WARN Failed to retrieve Hosted Engine HA info: timed out Sep 01 07:49:18 ovirt-node3.ovirt vdsm[3335]: WARN Failed to retrieve Hosted Engine HA info: timed out Sep 01 07:49:18 ovirt-node3.ovirt vdsm[3335]: WARN Failed to retrieve Hosted Engine HA info: timed out Sep 01 07:49:28 ovirt-node3.ovirt vdsm[3335]: WARN Failed to retrieve Hosted Engine HA info: timed out Sep 01 07:49:28 ovirt-node3.ovirt sanlock[1633]: 2022-09-01 07:49:28 1706161 [5083]: s4 delta_renew long write time 11 sec Sep 01 07:49:28 ovirt-node3.ovirt sanlock[1633]: 2022-09-01 07:49:28 1706161 [5033]: s3 delta_renew long write time 11 sec Sep 01 07:49:34 ovirt-node3.ovirt libvirtd[2496]: Domain id=65 name='ocr-Brain-28-ovirt.dmz.ssis' uuid=00425fb1-c24b-4eaa-9683-534d66b2cb04 is tainted: custom-ga-command Sep 01 07:49:47 ovirt-node3.ovirt sudo[268984]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/privsep-helper --privsep_context os_brick.privileged.default --privsep_sock_path /tmp/tmp1iolt06i/privsep.sock This is the indication I have on gluster: [root@ovirt-node3 ~]# gluster volume heal gv0 info Brick ovirt-node2.ovirt:/brickgv0/_gv0 Status: Connected Number of entries: 0 Brick ovirt-node3.ovirt:/brickgv0/gv0_1 Status: Connected Number of entries: 0 Brick ovirt-node4.ovirt:/dati/_gv0 Status: Connected Number of entries: 0 [root@ovirt-node3 ~]# gluster volume heal glen info Brick ovirt-node2.ovirt:/brickhe/_glen Status: Connected Number of entries: 0 Brick ovirt-node3.ovirt:/brickhe/glen Status: Connected Number of entries: 0 Brick ovirt-node4.ovirt:/dati/_glen Status: Connected Number of entries: 0 So it seem healty. I don't know how to address the issue but this is a great problem.

2 19

iSCSI domain not seen by a node if the topology differ from the topology of the other nodes?
by Diego Ercolani 21 Sep '22

21 Sep '22

Hello, I think I0ve found another issue: I have the three node that are under heavy test and, after having problem with gluster I configured them to use with iSCSI (without multipath now) so I configured via the gui a new iscsi data domain using a single target under a single VLAN. I suspect there is an issue reporting the correct volume in my case: I try to explain. This are the scsi devices in the three nodes: [root@ovirt-node2 ~]# lsscsi [4:0:0:0] disk ATA ST4000NM000A-2HZ TN02 /dev/sda [5:0:0:0] disk ATA Samsung SSD 870 2B6Q /dev/sdb [6:0:0:0] disk IBM 2145 0000 /dev/sdc [N:0:1:1] disk Force MP600__1 /dev/nvme0n1 [root@ovirt-node3 ~]# lsscsi [0:0:0:0] disk ATA Samsung SSD 870 2B6Q /dev/sda [6:0:0:0] disk IBM 2145 0000 /dev/sdb [N:0:0:1] disk WD Blue SN570 500GB__1 /dev/nvme0n1 [root@ovirt-node4 ~]# lsscsi [3:0:0:0] disk ATA ST4000NM000A-2HZ TN02 /dev/sda [4:0:0:0] disk ATA KINGSTON SA400S3 1103 /dev/sdb [5:0:0:0] disk IBM 2145 0000 /dev/sdc So you see, the SCSI target (IBM 2145) are mapped as /dev/sdc in node2 and node4, but in node3 is mapped as /dev/sdb. In vdsm log of node3 I can find: 2022-09-21 15:53:57,831+0000 INFO (monitor/aac7917) [storage.storagedomaincache] Looking up domain aac79175-ab2b-4b5b-a6e4-9feef9ce17ab (sdc:171) 2022-09-21 15:53:57,899+0000 INFO (monitor/aac7917) [storage.storagedomaincache] Looking up domain aac79175-ab2b-4b5b-a6e4-9feef9ce17ab: 0.07 seconds (utils:390) 2022-09-21 15:53:57,899+0000 ERROR (monitor/aac7917) [storage.monitor] Setting up monitor for aac79175-ab2b-4b5b-a6e4-9feef9ce17ab failed (monitor:363) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/monitor.py", line 360, in _setupLoop self._setupMonitor() File "/usr/lib/python3.6/site-packages/vdsm/storage/monitor.py", line 382, in _setupMonitor self._setupDomain() File "/usr/lib/python3.6/site-packages/vdsm/utils.py", line 153, in wrapper value = meth(self, *a, **kw) File "/usr/lib/python3.6/site-packages/vdsm/storage/monitor.py", line 598, in _setupDomain domain = sdCache.produce(self.sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 115, in produce domain.getRealDomain() File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 51, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 139, in _realProduce domain = self._findDomain(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 156, in _findDomain return findMethod(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 186, in _findUnfetchedDomain raise se.StorageDomainDoesNotExist(sdUUID) vdsm.storage.exception.StorageDomainDoesNotExist: Storage domain does not exist: ('aac79175-ab2b-4b5b-a6e4-9feef9ce17ab',) So the node is kicked out of the ovirt cluster telling that it's not possible to connect to iSCSI domain.....

1 0

VM Down With "Bad Volume Specification"
by Clint Boggio 21 Sep '22

21 Sep '22

I had occasion to shutdown a VM for the purpose of adding RAM and processor to it and the VM willnot boot back up. I'm seeing "VM Issabel_PBX is down with error. Exit message: Bad volume specification {'address': {'bus': '0', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'serial': '6af66318-e6f8-45d7-8b4e-2183faf0a917', 'index': 0, 'iface': 'scsi', 'apparentsize': '5706743808', 'specParams': {}, 'cache': 'none', 'imageID': '6af66318-e6f8-45d7-8b4e-2183faf0a917', 'truesize': '5950070784', 'type': 'disk', 'domainID': '24c4dc1b-c843-4ae2-963f-9d0548305192', 'reqsize': '0', 'format': 'cow', 'poolID': '31fdd642-6b06-11ea-a4c4-00163e333bd2', 'device': 'disk', 'path': '/rhev/data-center/31fdd642-6b06-11ea-a4c4-00163e333bd2/24c4dc1b-c843-4ae2-963f-9d0548305192/images/6af66318-e6f8-45d7-8b4e-2183faf0a917/576b2761-a5bc-427b-95a9-0594447f0705', 'propagateErrors': 'off', 'name': 'sda', 'bootOrder': '1', 'volumeID': '576b2761-a5bc-427b-95a9-0594447f0705', 'diskType': 'file', 'a lias': 'ua-6af66318-e6f8-45d7-8b4e-2183faf0a917', 'discard': False}." in the log. I tried to move the VMs disk from one gluster datastore to another to see if the problem would clear and now the disk is locked and the move is stuck at %10. In the engine logs I have "2022-09-19 12:48:25,614-05 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task '4b96a8e1-ab65-4d1c-97dd-e985ab7816c6' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2022-09-19 12:48:25,614-05 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] Task id '4b96a8e1-ab65-4d1c-97dd-e985ab7816c6' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2022-09-19 12:48:25,631-05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] EVENT_ID: TASK_CLEARING_ASYNC_TASK(9,501), Clearing asynchronous task Unknown that started at Tue Jul 12 12:19:21 CDT 2022 2022-09-19 12:48:25,631-05 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] Cleaning zombie tasks: Clearing async task 'Unknown' that started at 'Tue Jul 12 12:19:21 CDT 2022' since it reached a timeout of 3000 minutes 2022-09-19 12:48:25,631-05 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task '4b96a8e1-ab65-4d1c-97dd-e985ab7816c6' 2022-09-19 12:48:25,632-05 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='31fdd642-6b06-11ea-a4c4-00163e333bd2', ignoreFailoverLimit='false', taskId='4b96a8e1-ab65-4d1c-97dd-e985ab7816c6'}), log id: 40d6d67f 2022-09-19 12:48:25,633-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] START, HSMClearTaskVDSCommand(HostName = hprvsr00.locacore.com, HSMTaskGuidBaseVDSCommandParameters:{hostId='6c910725-fb42-4a64-b614-2a29bf0800e2', taskId='4b96a8e1-ab65-4d1c-97dd-e985ab7816c6'}), log id: 22c28060 2022-09-19 12:48:25,638-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] FINISH, HSMClearTaskVDSCommand, return: , log id: 22c28060 2022-09-19 12:48:25,639-05 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] FINISH, SPMClearTaskVDSCommand, return: , log id: 40d6d67f 2022-09-19 12:48:25,639-05 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task '4b96a8e1-ab65-4d1c-97dd-e985ab7816c6' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2022-09-19 12:48:25,876-05 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-98) [149db168-34c0-4814-869e-1ca0fdbde768] Command 'CopyImageGroupWithData' (id: '9e73adde-e485-461a-b349-7fd814890aa6') waiting on child command id: '5b4d0a00-7e40-4016-bf5c-0db013e22983' type:'CopyImageGroupVolumesData' to complete 2022-09-19 12:48:26,878-05 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-84) [149db168-34c0-4814-869e-1ca0fdbde768] Command 'CopyImageGroupVolumesData' (id: '5b4d0a00-7e40-4016-bf5c-0db013e22983') waiting on child command id: '1b496e55-9407-4fd7-a2f2-bb70bf4e7aa0' type:'CopyData' to complete 2022-09-19 12:48:27,886-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHostJobsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [149db168-34c0-4814-869e-1ca0fdbde768] START, GetHostJobsVDSCommand(HostName = hprvsr00.locacore.com, GetHostJobsVDSCommandParameters:{hostId='6c910725-fb42-4a64-b614-2a29bf0800e2', type='storage', jobIds='[06208564-b66d-4947-a96f-4d163ef2fbe0]'}), log id: 75ca6198 2022-09-19 12:48:27,894-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHostJobsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [149db168-34c0-4814-869e-1ca0fdbde768] FINISH, GetHostJobsVDSCommand, return: {06208564-b66d-4947-a96f-4d163ef2fbe0=HostJobInfo:{id='06208564-b66d-4947-a96f-4d163ef2fbe0', type='storage', description='copy_data', status='running', progress='null', error='null'}}, log id: 75ca6198 2022-09-19 12:48:27,902-05 INFO [org.ovirt.engine.core.bll.StorageJobCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [149db168-34c0-4814-869e-1ca0fdbde768] Command CopyData id: '1b496e55-9407-4fd7-a2f2-bb70bf4e7aa0': waiting for job '06208564-b66d-4947-a96f-4d163ef2fbe0' on host 'hprvsr00.locacore.com' (id: '6c910725-fb42-4a64-b614-2a29bf0800e2') to complete 2022-09-19 12:48:29,911-05 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-57) [149db168-34c0-4814-869e-1ca0fdbde768] Command 'MoveOrCopyDisk' (id: '2ec06560-b552-4418-abd7-e2945cd98c12') waiting on child command id: '80a2481e-707f-49bf-b469-33cd90c1a51c' type:'MoveImageGroup' to complete 2022-09-19 12:48:29,915-05 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-57) [149db168-34c0-4814-869e-1ca0fdbde768] Command 'MoveImageGroup' (id: '80a2481e-707f-49bf-b469-33cd90c1a51c') waiting on child command id: '9e73adde-e485-461a-b349-7fd814890aa6' type:'CopyImageGroupWithData' to complete" Any help would be appreciated as the client's PBX is currently down as a result.

2 4

Re: Self-hosted-engine timeout and recovering time
by Yedidyah Bar David 21 Sep '22

21 Sep '22

On Wed, Sep 21, 2022 at 12:22 AM Marcos Sungaila <marcos.sungaila(a)oracle.com> wrote: > > Hi all, > > I have a cluster running the 4.4.10 release with 6 KVM hosts and Self-Hosted-Engine. What storage? > I'm testing some network outage scenarios, and I faced strange behavior. I suppose you have redundancy in your network. It's important to clarify (for yourself, mainly) what exactly you test, what's important, what's expected, etc. > After disconnecting the KVM hosts hosting the SHE, there was a long timeout until switching the Self-Hosted-Engine to another host as expected. I suggest studying the ha-agent logs, /var/log/ovirt-hosted-engine-ha/agent.log. Much of the relevant code is in ovirt_hosted_engine_ha/agent/states.py (in the git repo, or under /usr/lib/python3.6/site-packages/ on your machine). > Also, there took a relatively long time to take over the HA VMs from the failing server. That's a separate issue, about which I personally know very little. You might want to start a separate thread about it. I do know, though, that if you keep the storage connected, the host might be able to keep updating VM leases on the storage. See e.g.: https://www.ovirt.org/develop/release-management/features/storage/vm-leases… I didn't check the admin guide, but I suppose it has some material about HA VMs. > Is there a configuration where I can reduce the SHE timeout to make this recover process faster? IIRC there is nothing user-configurable. You can see most relevant constants in ovirt_hosted_engine_ha/agent/constants.py{,.in}. Nothing stops you from changing them, but please note that this is somewhat risky, and I strongly suggest to do very careful testing with your new settings. It might make sense to try to methodically go through all the possible state changes in the above state machine. The general assumption is that network and storage, for critical setups, are redundant, and that the engine itself is not considered critical, in the sense that if it's dead, all your VMs are still alive. And also, that it's more important to not corrupt VM disk images (e.g. by starting the VM concurrently on two hosts) than to keep the VM alive. Best regards, -- Didi

2 1

all active domains with status unknown in old 4.3 cluster
by Jorick Astrego 21 Sep '22

21 Sep '22

Hi, Currently I'm debugging a client's ovirt 4.3 cluster. I was adding two new gluster domains and got a timeout "VDSM command AttachStorageDomainVDS failed: Resource timeout: ()" and "Failed to attach Storage Domain *** to Data Center **". Then I had to restart ovirt-engine and now all the domains including NFS domains have status "unknown" and I see "VDSM command GetStoragePoolInfoVDS failed: Resource timeout: ()" in the events. Anyone fixed this before or have any tips? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

1 0

Snapshot task stuck at oVirt 4.4.8
by nicolas＠devels.es 21 Sep '22

21 Sep '22

Hi, We're running oVirt 4.4.8 and one of our users tried to create a snapshot on a VM. The snapshot task got stuck (not sure why) and since then a "locked" icon is being shown on the VM. We need to remove this VM, but since it has a pending task, we're unable. The ovirt-engine log shows hundreds of events like: [2022-09-20 09:23:09,286+01 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-27) [2769dad5-3ec3-4c46-90a2-924746ea8d97] Command 'CreateSnapshotForVm' (id: '4fcb6ab7-2cd7-4a0c-be97-f6979be25bb9') waiting on child command id: 'cbb7a2c0-2111-4958-a55d-d48bf2d8591b' type:'CreateLiveSnapshotForVm' to complete An ovirt-engine restart didn't make any difference. Is there a way to remove this task manually, even changing something in the DB? Thanks.

4 4

oVirt Engine VM On Rocky Linux
by Matthew J Black 21 Sep '22

21 Sep '22

Hi Everybody (Hi Dr. Nick), Has anyone attempted to migrate the oVirt Engine VM over to Rocky Linux (v8.6), and if so, any "gotchas" we need to know about? Cheers Dulux-Oz

1 0

oVirt & (Ceph) iSCSI
by Matthew J Black 21 Sep '22

21 Sep '22

Hi Everybody (Hi Dr. Nick), So, next question in my on-going saga: *somewhere* in the documentation I read that when using oVirt with multiple iSCSI paths (in my case, multiple Ceph iSCSI Gateways) we need to set up DM Multipath. My question is: Is this still relevant information when using oVirt v4.5.2? Relevant link referred to by the oVirt Documentation: - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/ht… Cheers Dulux-Oz

1 0

Self-hosted-engine timeout and recovering time
by Marcos Sungaila 20 Sep '22

20 Sep '22

Hi all, I have a cluster running the 4.4.10 release with 6 KVM hosts and Self-Hosted-Engine. I'm testing some network outage scenarios, and I faced strange behavior. After disconnecting the KVM hosts hosting the SHE, there was a long timeout until switching the Self-Hosted-Engine to another host as expected. Also, there took a relatively long time to take over the HA VMs from the failing server. Is there a configuration where I can reduce the SHE timeout to make this recover process faster? Regards, Marcos Sungaila

1 0

How do I migrate a running VM off unassigned host?
by David White 20 Sep '22

20 Sep '22

Ok, now that I'm able to (re)deploy ovirt to new hosts, I now need to migrate VMs that are running on hosts that are currently in an "unassigned" state in the cluser. This is the result of having moved the oVirt engine OUT of a hyperconverged environment onto its own stand-alone system, while simultaneously upgrading oVirt from v4.4 to the latest v4.5. See the following email threads: - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/TZAUCM3GB5ERST… - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/3IWXZ7VXM6CYYS… The oVirt engine knows about the VMs, and oVirt knows about the storage that those VMs are on. But the engine sees 2 of my hosts as "unassigned", and I've been unable to migrate the disks to new storage, nor live migrate a VM from an unassigned host, nor make a clone of an existing VM. Is there a way to recover from this scenario? I was thinking something along the lines of manually shutting down the VM on the unassigned host, and then somehow force the engine to bring the VM online again from a healthy host? Thanks, David Sent with Proton Mail secure email.

2 4