- Users - oVirt List Archives

[Users] Power state of vm not in sync with real state
by Gianluca Cecchi 21 Apr '13

21 Apr '13

Hello, oVirt 3.2.1 Installed rhev-agent-2.3.16-6.el6.x86_64 on CentOS 6.4 VM. I click shutdown button (red square icon that implies 1 minutes timeout before actual shutdown). After a few seconds the icon at left of the VM becomes "stopped" (red square), but actually shutdown has not benn taking palce yet at all..... Could it be possible to have the icon in sync with real stae? See this image where I have a spice console opened at VM. shutdown not yet beagun and icon in web admin gui that shows the VM as powered off..... https://docs.google.com/file/d/0BwoPbcrMv8mvUmdTM3lnZGVOYk0/edit?usp=sharing Thanks, Gianluca

3 3

Re: [Users] usb pass-through
by Einav Cohen 21 Apr '13

21 Apr '13

> ----- Original Message ----- > From: "Ryan Wilkinson" <ryanwilk(a)gmail.com> > Sent: Saturday, April 20, 2013 10:58:49 AM > > Thanks for the response. Is the master release accessible via a repo.? from your question I understand that you are currently using ovirt 3.2.1 rather than master [to answer Itamar's question from the previous e-mail], and that explains the slowness of the portals on IE8 that you are experiencing. Please note that on oVirt master, the performance improvement patches for IE8 affect only the user portal; unfortunately, the admin portal still suffers from performance problems on IE8. with regards to the master release accessibility: I am not sure if we have a master release; you can build oVirt-engine directly from the code-repo by following the instructions in the following wiki-page: http://www.ovirt.org/Build_and_Install_Engine_RPM @Itamar/others: do we have some kind of a nightly/weekly/occasionally repository of ovirt builds/rpms? the IE8 performance patches were introduced to oVirt master on March 1 (almost 2 months ago), so anything rebased from ovirt master at that point in time or afterwards would be helpful. > I've been using Fedora 18. Is usb pass-through not supported for Windows > clients? as Itamar mentioned below, spice-devel mailing-list members (CC'd) should be able to answer this question. > > > On Sat, Apr 20, 2013 at 8:00 AM, Einav Cohen <ecohen(a)redhat.com> wrote: > > > > ----- Original Message ----- > > > From: "Itamar Heim" <iheim(a)redhat.com> > > > Sent: Saturday, April 20, 2013 9:32:39 AM > > > > > > On 04/20/2013 01:26 AM, Ryan Wilkinson wrote: > > > > Does the Windows spice client not support usb pass-through? Also, is > > > > extremely slow with IE 8. Any advice on speeding the user or admin > > > > console up in IE8? > > > > > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users(a)ovirt.org > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > adding spice-devel for the usb question. > > > for the IE8 - some improvements went to master for IE8 performance, but > > > i don't think they are in ovirt 3.2.1 (einav?). > > > > that's right: the recent IE8 improvements are not included in ovirt 3.2.1, > > they are only in master. > > > > > are you using master or 3.2.1? > > > > > >

3 2

[Users] AllInOne installation issue
by Georg Troxler 20 Apr '13

20 Apr '13

> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3447176736_606486 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable When running the AllInOne installation =A8engine-setup --config-allinone=3Dyes=A8 the last step of my installation always fails. I freshly setup a fedora 18 box (minimal) and directly installed ovirt: sudo yum localinstall http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm sudo yum install ovirt-engine-setup-plugin-allinone engine-setup --config-allinone=3Dyes I also tried with the nightly build which did not solve the issue for me. Any idea how to fix this? This is the end of my install log: 2013-03-26 20:28:07::DEBUG::engine-setup::1965::root:: *** The following params were used as user input: 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: override-httpd-config: yes 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: http-port: 80 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: https-port: 443 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: random-passwords: no 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: mac-range: 00:1A:4A:A8:02:00-00:1A:4A:A8:02:FF 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: host-fqdn: localhost.localdomain 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: auth-pass: ******** 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: org-name: localdomai= n 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: application-mode: both 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: default-dc-type: NFS 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-remote-install: local 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-host: localhost 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-local-pass: ******** 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: nfs-mp: /var/lib/exports/iso 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: iso-domain-name: ISO_DOMAIN 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: config-nfs: yes 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: override-firewall: None 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: config-allinone: yes 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: storage-path: /var/lib/images 2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: superuser-pass: ******** 2013-03-26 20:28:07::ERROR::engine-setup::2385::root:: Traceback (most recent call last): File "/bin/engine-setup", line 2379, in <module> main(confFile) File "/bin/engine-setup", line 2162, in main runSequences() File "/bin/engine-setup", line 2085, in runSequences controller.runAllSequences() File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in runAllSequences sequence.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in run step.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in ru= n function() File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 300, in waitForHostUp utils.retry(isHostUp, tries=3D120, timeout=3D600, sleep=3D5) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in retry raise e RetryFailException: Error: Host was found in a 'Failed' state. Please check engine and bootstrap installation logs. --B_3447176736_606486 Content-type: text/html; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable <html><head></head><body style=3D"word-wrap: break-word; -webkit-nbsp-mode: s= pace; -webkit-line-break: after-white-space; color: rgb(0, 0, 0); font-size:= 14px; font-family: Calibri, sans-serif; "><div>When running the AllInOne in= stallation =A8engine-setup --config-allinone=3Dyes=A8 the last step of my installa= tion always fails. I freshly setup a fedora 18 box (minimal) and directly in= stalled ovirt:</div><div><br></div><div>sudo yum localinstall http://ovirt.o= rg/releases/ovirt-release-fedora.noarch.rpm</div><div>sudo yum install ovirt= -engine-setup-plugin-allinone</div>engine-setup --config-allinone=3Dyes<div><b= r></div><div>I also tried with the nightly build which did not solve the iss= ue for me. Any idea how to fix this?</div><div><br></div><div>This is the en= d of my install log:</div><div><br></div><div><div>2013-03-26 20:28:07::DEBU= G::engine-setup::1965::root:: *** The following params were used as user inp= ut:</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: overrid= e-httpd-config: yes</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970= ::root:: http-port: 80</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1= 970::root:: https-port: 443</div><div>2013-03-26 20:28:07::DEBUG::engine-set= up::1970::root:: random-passwords: no</div><div>2013-03-26 20:28:07::DEBUG::= engine-setup::1970::root:: mac-range: 00:1A:4A:A8:02:00-00:1A:4A:A8:02:FF</d= iv><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: host-fqdn: lo= calhost.localdomain</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970= ::root:: auth-pass: ********</div><div>2013-03-26 20:28:07::DEBUG::engine-se= tup::1970::root:: org-name: localdomain</div><div>2013-03-26 20:28:07::DEBUG= ::engine-setup::1970::root:: application-mode: both</div><div>2013-03-26 20:= 28:07::DEBUG::engine-setup::1970::root:: default-dc-type: NFS</div><div>2013= -03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-remote-install: local<= /div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-host: lo= calhost</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: db-= local-pass: ********</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::197= 0::root:: nfs-mp: /var/lib/exports/iso</div><div>2013-03-26 20:28:07::DEBUG:= :engine-setup::1970::root:: iso-domain-name: ISO_DOMAIN</div><div>2013-03-26= 20:28:07::DEBUG::engine-setup::1970::root:: config-nfs: yes</div><div>2013-= 03-26 20:28:07::DEBUG::engine-setup::1970::root:: override-firewall: None</d= iv><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: config-allino= ne: yes</div><div>2013-03-26 20:28:07::DEBUG::engine-setup::1970::root:: sto= rage-path: /var/lib/images</div><div>2013-03-26 20:28:07::DEBUG::engine-setu= p::1970::root:: superuser-pass: ********</div><div>2013-03-26 20:28:07::ERRO= R::engine-setup::2385::root:: Traceback (most recent call last):</div><div>&= nbsp; File "/bin/engine-setup", line 2379, in <module></div><div>&nbsp= ;   main(confFile)</div><div>  File "/bin/engine-setup", line 2162= , in main</div><div>    runSequences()</div><div>  File "/bin= /engine-setup", line 2085, in runSequences</div><div>    controlle= r.runAllSequences()</div><div>  File "/usr/share/ovirt-engine/scripts/s= etup_controller.py", line 54, in runAllSequences</div><div>    seq= uence.run()</div><div>  File "/usr/share/ovirt-engine/scripts/setup_seq= uences.py", line 154, in run</div><div>    step.run()</div><div>&n= bsp; File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in = run</div><div>    function()</div><div>  File "/usr/share/ovi= rt-engine/scripts/plugins/all_in_one_100.py", line 300, in waitForHostUp</di= v><div>    utils.retry(isHostUp, tries=3D120, timeout=3D600, sleep=3D5)<= /div><div>  File "/usr/share/ovirt-engine/scripts/common_utils.py", lin= e 1009, in retry</div><div>    raise e</div><div>RetryFailExceptio= n: Error: Host was found in a 'Failed' state. Please check engine and bootst= rap installation logs.</div></div></body></html> --B_3447176736_606486--

6 15

[Users] snapshots, checkpoints etc...
by Jiri Belka 20 Apr '13

20 Apr '13

Probably not the best list for this question but anyway... * "snapshot" as it is done with 'savevm' from qemu monitor saves disk, cpu, memory state of running VM... but 1. it must be qcow2 image 2. it pauses the VM for couple of seconds is this right? * snapshots is only for block devices, are done offline * live snapshot is only for block devices, can be done online * snapshot tree with branches is not supported now am I right? So my understanding there is no way to have a "photo", in qemu language _checkpoint_, in VMWare language _snapshot_ without interupting the VM. Am I right? Any comments? This topic is quite confusing while searching Internet. jbelka

2 1

[Users] How to force remove hosts, storage, datacenters
by Gianluca Cecchi 20 Apr '13

20 Apr '13

Hello, I have some inconsistencies so that I would like to reinitialize my datacenter. It is 3.2.1 on f18 engine and f18 host it consists of one host and one local_on_host storage domain I'm not able to delete the host. It results as unassigned and so I cannot delete it, but if I try to remove storage or datacenter I get: storage: destroy --> approve Error while executing action: Cannot destroy the master Storage Domain from the Data Center without another active Storage Domain to take its place. -Either activate another Storage Domain in the Data Center, or remove the Data Center. -If you have problems with the master Data Domain, consider following the recovery process described in the documentation, or contact your system administrator. datacenter: force remove --> approve Error: Cannot remove Repository while there are Hosts that are not in Maintenance mode. what can I do to force remove a host? The maintenance label is greyed out and it results as unassigned.... Thanks, Gianluca

3 5

[Users] oVirt 3.2.1 and node 2.6.1
by martin.kralicek＠accenture.com 20 Apr '13

20 Apr '13

--_000_A14EC602F2E1DD4984ABE308D49EA2D226D04B14048CH1MPN116204_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello I would like to ask if anybody have problem with add ovirt node 2.6.1 to ov= irt 3.2.1 I am able to add host base on Fedora 18. This issue is not important for me= . But for someone can be. So, is it possible right now to add node 2.6.1 to ovirt 3.2.1 or is it bug = or...? :) Thanks ________________________________ This message is for the designated recipient only and may contain privilege= d, proprietary, or otherwise confidential information. If you have received= it in error, please notify the sender immediately and delete the original.= Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and it= s affiliates, including e-mail and instant messaging (including content), m= ay be scanned by our systems for the purposes of information security and a= ssessment of internal compliance with Accenture policy. ___________________________________________________________________________= ___________ www.accenture.com --_000_A14EC602F2E1DD4984ABE308D49EA2D226D04B14048CH1MPN116204_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 12 (filtered medium)"> <style></style> </head> <body lang=3D"CS" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hello<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I would like to ask if anybody have problem with add= ovirt node 2.6.1 to ovirt 3.2.1<o:p></o:p></p> <p class=3D"MsoNormal">I am able to add host base on Fedora 18. This issue = is not important for me. But for someone can be.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">So, is it possible right now to add node 2.6.1 to ov= irt 3.2.1 or is it bug or...? <span style=3D"font-family:Wingdings">J</span><o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks<o:p></o:p></p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1">This message is for the desi= gnated recipient only and may contain privileged, proprietary, or otherwise= confidential information. If you have received it in error, please notify = the sender immediately and delete the original. Any other use of the e-mail by you is prohibited.<br> <br> Where allowed by local law, electronic communications with Accenture and it= s affiliates, including e-mail and instant messaging (including content), m= ay be scanned by our systems for the purposes of information security and a= ssessment of internal compliance with Accenture policy.<br> <br> ___________________________________________________________________________= ___________<br> <br> www.accenture.com<br> </font> </body> </html> --_000_A14EC602F2E1DD4984ABE308D49EA2D226D04B14048CH1MPN116204_--

3 11

[Users] debug engine error
by bigclouds 20 Apr '13

20 Apr '13

------=_Part_299157_803925047.1365729265408 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit i think Building oVirt engine is too old. who could give a more detailed docoment, begin build from source code. 2013-04-11 17:38:49,580 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:49,581 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:49,587 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property AdminPassword will be used encrypted value 2013-04-11 17:38:49,606 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:49,611 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:49,615 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property LocalAdminPassword will be used encrypted value 2013-04-11 17:38:50,123 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:50,124 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big. 2013-04-11 17:38:50,136 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property TruststorePass will be used encrypted value ------=_Part_299157_803925047.1365729265408 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"><div><h1 style="font: 36px/40px "Venturis Sans", "Open Sans", sans-serif; margin: 10px 0px 30px; color: rgb(46, 52, 54); text-transform: none; text-indent: 0px; letter-spacing: normal; padding-top: 0px; padding-bottom: 9px; word-spacing: 0px; border-bottom-color: rgb(238, 238, 238); border-bottom-width: 1px; border-bottom-style: solid; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: rgb(255, 255, 255); -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; text-rendering: optimizelegibility;" id="firstHeading" class="firstHeading page-header"><span style="font-size: 16px;" dir="auto">i think Building oVirt engine  is too old.</span></h1><h1 style="font: 36px/40px "Venturis Sans", "Open Sans", sans-serif; margin: 10px 0px 30px; color: rgb(46, 52, 54); text-transform: none; text-indent: 0px; letter-spacing: normal; padding-top: 0px; padding-bottom: 9px; word-spacing: 0px; border-bottom-color: rgb(238, 238, 238); border-bottom-width: 1px; border-bottom-style: solid; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: rgb(255, 255, 255); -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; text-rendering: optimizelegibility;" class="firstHeading page-header"><span style="font-size: 16px;" dir="auto">who could give a more detailed docoment,  begin build from source code.</span></h1><h1 style="font: 36px/40px "Venturis Sans", "Open Sans", sans-serif; margin: 10px 0px 30px; color: rgb(46, 52, 54); text-transform: none; text-indent: 0px; letter-spacing: normal; padding-top: 0px; padding-bottom: 9px; word-spacing: 0px; border-bottom-color: rgb(238, 238, 238); border-bottom-width: 1px; border-bottom-style: solid; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: rgb(255, 255, 255); -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; text-rendering: optimizelegibility;" class="firstHeading page-header"><span style="font-size: 16px;" dir="auto"></span> </h1></div><div> </div><div>2013-04-11 17:38:49,580 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:49,581 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:49,587 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property AdminPassword will be used encrypted value<br>2013-04-11 17:38:49,606 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:49,611 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:49,615 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property LocalAdminPassword will be used encrypted value<br>2013-04-11 17:38:50,123 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Can't load keystore from file "/etc/pki/ovirt-engine/ca/.keystore". IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:50,124 ERROR [org.ovirt.engine.core.utils.crypt.EncryptionUtils] (MSC service thread 1-2) Failed to decrypt java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big.<br>2013-04-11 17:38:50,136 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-2) Failed to decrypt value for property TruststorePass will be used encrypted value</div></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_299157_803925047.1365729265408--

3 3

[Users] iSCSI storage domain - expand disk
by martin.kralicek＠accenture.com 20 Apr '13

20 Apr '13

--_000_A14EC602F2E1DD4984ABE308D49EA2D226D0E665048CH1MPN116204_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, Is there any possible way, how to expand iSCSI disk on engine 3.2.1? Simple scene: I have already created iSCSI disk with 100GB and I can use it= as master storage, but now I expand this this via physical storage managem= ent to 150GB. OK engine now detected that disk has capacity 150GB but the usable disk spa= ce is still only 100GB. I think that issue is with partition on this disk. It is possible to do? What file system is used for iSCSI disk? Thanks Martin ________________________________ This message is for the designated recipient only and may contain privilege= d, proprietary, or otherwise confidential information. If you have received= it in error, please notify the sender immediately and delete the original.= Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and it= s affiliates, including e-mail and instant messaging (including content), m= ay be scanned by our systems for the purposes of information security and a= ssessment of internal compliance with Accenture policy. ___________________________________________________________________________= ___________ www.accenture.com --_000_A14EC602F2E1DD4984ABE308D49EA2D226D0E665048CH1MPN116204_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hi,<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Is there any possible way, how to expand iSCSI disk = on engine 3.2.1?<o:p></o:p></p> <p class=3D"MsoNormal">Simple scene: I have already created iSCSI disk with= 100GB and I can use it as master storage, but now I expand this this via p= hysical storage management to 150GB.<o:p></o:p></p> <p class=3D"MsoNormal">OK engine now detected that disk has capacity 150GB = but the usable disk space is still only 100GB.<o:p></o:p></p> <p class=3D"MsoNormal">I think that issue is with partition on this disk. I= t is possible to do?<o:p></o:p></p> <p class=3D"MsoNormal">What file system is used for iSCSI disk?<o:p></o:p><= /p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Martin<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal" style=3D"margin-bottom:12.0pt"><b><span style=3D"fon= t-size:7.5pt;font-family:"Arial","sans-serif";color:#1F= 497D"><o:p> </o:p></span></b></p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1">This message is for the desi= gnated recipient only and may contain privileged, proprietary, or otherwise= confidential information. If you have received it in error, please notify = the sender immediately and delete the original. Any other use of the e-mail by you is prohibited.<br> <br> Where allowed by local law, electronic communications with Accenture and it= s affiliates, including e-mail and instant messaging (including content), m= ay be scanned by our systems for the purposes of information security and a= ssessment of internal compliance with Accenture policy.<br> <br> ___________________________________________________________________________= ___________<br> <br> www.accenture.com<br> </font> </body> </html> --_000_A14EC602F2E1DD4984ABE308D49EA2D226D0E665048CH1MPN116204_--

2 1

[Users] Fail to attach user to VM from VMPool when VM's are prestarted
by Karli Sjöberg 20 Apr '13

20 Apr '13

--_000_5F9E965F5A80BC468BE5F40576769F09255073F0exchange21_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGV5IGFsbCwNCg0KYWZ0ZXIgZmluYWxseSBiZWluZyBhYmxlIHRvIHVzZSBTUElDRSBjb25zb2xl IHRocm91Z2ggdGhlIFVzZXIgcG9ydGFsLCBJIGhhdmUgY3JlYXRlZCBhIFZNUG9vbCB0byBzdGFy dCB0ZXN0aW5nIG91dCBvVmlydMK0cyBWREkgY2FwYWJpbGl0aWVzLiBPbmUgYnVnIEnCtHZlIG5v dGljZWQgaXMgdGhhdCBpZiB5b3Ugc2V0IFZNJ3MgdG8gYmUgcHJlc3RhcnRlZCwgdXNlcnMgY2Fu bm90ICJUYWtlIFZNIiBhdCBhbGwsIGl0IGJvbWJzIG91dCB3aXRoIGVycm9yOiAiRmFpbGVkIHRv IGF0dGFjaCBVc2VyIHRlc3R1c2VyIHRvIFZNIGZyb20gVk0gUG9vbCBUZXN0aW5nIChVc2VyOiB0 ZXN0dXNlcikiLiBXaXRob3V0IGhhdmluZyBWTSdzIHByZXN0YXJ0ZWQgbWFrZXMgdGhlIHByb2Nl c3MgY29tcGxldGUgYXMgZXhwZWN0ZWQsIGJ1dCB0aGVuIHVzZXJzIGhhdmUgdG8gd2FpdCBmb3Ig Vk0gdG8gc3RhcnQgYmVmb3JlIGhhdmluZyBhY2Nlc3MgdG8gdGhlIGNvbnNvbGUuIEnCtHZlIHBh c3RlZCBzbmlwcGV0cyBmcm9tIGVuZ2luZS5sb2cgb3V0IG9uIHBhc3RlYmluLg0KDQpTdWNjZXNz ZnVsICJUYWtlIiB3aXRoIGNvbGRzdGFydDoNCmh0dHA6Ly9wYXN0ZWJpbi5jb20vNEF3OURIbWQN Cg0KRmFpbGVkICJUYWtlIiB3aXRoIHByZXN0YXJ0Og0KaHR0cDovL3Bhc3RlYmluLmNvbS9FUzVG M3NEMQ0KDQojIHJwbSAtcWEgfCBncmVwIGVuZ2luZQ0Kb3ZpcnQtZW5naW5lLWNvbmZpZy0zLjEu MC00LmZjMTcubm9hcmNoDQpvdmlydC1lbmdpbmUtZGJzY3JpcHRzLTMuMS4wLTQuZmMxNy5ub2Fy Y2gNCm92aXJ0LWVuZ2luZS1yZXN0YXBpLTMuMS4wLTQuZmMxNy5ub2FyY2gNCm92aXJ0LWVuZ2lu ZS1nZW5lcmljYXBpLTMuMS4wLTQuZmMxNy5ub2FyY2gNCm92aXJ0LWVuZ2luZS13ZWJhZG1pbi1w b3J0YWwtMy4xLjAtNC5mYzE3Lm5vYXJjaA0Kb3ZpcnQtZW5naW5lLXNldHVwLTMuMS4wLTQuZmMx Ny5ub2FyY2gNCm92aXJ0LWVuZ2luZS1zZGstMy4yLjAuMi0xLmZjMTcubm9hcmNoDQpvdmlydC1l bmdpbmUtYmFja2VuZC0zLjEuMC00LmZjMTcubm9hcmNoDQpvdmlydC1lbmdpbmUtdG9vbHMtY29t bW9uLTMuMS4wLTQuZmMxNy5ub2FyY2gNCm92aXJ0LWVuZ2luZS0zLjEuMC00LmZjMTcubm9hcmNo DQpvdmlydC1lbmdpbmUtdXNlcnBvcnRhbC0zLjEuMC00LmZjMTcubm9hcmNoDQpvdmlydC1lbmdp bmUtbm90aWZpY2F0aW9uLXNlcnZpY2UtMy4xLjAtNC5mYzE3Lm5vYXJjaA0KDQpJcyB0aGVyZSBh bnl0aGluZyBlbHNlIEkgY2FuIGJyaW5nIHRvIGhlbHAgaXJvbiBvdXQgdGhpcyBraW5rPw0KDQot LQ0KDQpNZWQgVsOkbmxpZ2EgSMOkbHNuaW5nYXINCi0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0NCkth cmxpIFNqw7ZiZXJnDQpTd2VkaXNoIFVuaXZlcnNpdHkgb2YgQWdyaWN1bHR1cmFsIFNjaWVuY2Vz DQpCb3ggNzA3OSAoVmlzaXRpbmcgQWRkcmVzcyBLcm9uw6VzdsOkZ2VuIDgpDQpTLTc1MCAwNyBV cHBzYWxhLCBTd2VkZW4NClBob25lOiAgKzQ2LSgwKTE4LTY3IDE1IDY2DQprYXJsaS5zam9iZXJn QHNsdS5zZTxtYWlsdG86a2FybGkuc2pvYmVyZ0BhZG0uc2x1LnNlPg0K --_000_5F9E965F5A80BC468BE5F40576769F09255073F0exchange21_ Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUUkFOU0lUSU9OQUwv L0VOIj4NCjxodG1sPg0KPGhlYWQ+DQo8bWV0YSBodHRwLWVxdWl2PSJDb250ZW50LVR5cGUiIGNv bnRlbnQ9InRleHQvaHRtbDsgY2hhcnNldD11dGYtOCI+DQo8bWV0YSBuYW1lPSJHRU5FUkFUT1Ii IGNvbnRlbnQ9Ikd0a0hUTUwvNC40LjQiPg0KPC9oZWFkPg0KPGJvZHk+DQpIZXkgYWxsLDxicj4N Cjxicj4NCmFmdGVyIGZpbmFsbHkgYmVpbmcgYWJsZSB0byB1c2UgU1BJQ0UgY29uc29sZSB0aHJv dWdoIHRoZSBVc2VyIHBvcnRhbCwgSSBoYXZlIGNyZWF0ZWQgYSBWTVBvb2wgdG8gc3RhcnQgdGVz dGluZyBvdXQgb1ZpcnTCtHMgVkRJIGNhcGFiaWxpdGllcy4gT25lIGJ1ZyBJwrR2ZSBub3RpY2Vk IGlzIHRoYXQgaWYgeW91IHNldCBWTSdzIHRvIGJlIHByZXN0YXJ0ZWQsIHVzZXJzIGNhbm5vdCAm cXVvdDtUYWtlIFZNJnF1b3Q7IGF0IGFsbCwgaXQgYm9tYnMgb3V0IHdpdGggZXJyb3I6DQogJnF1 b3Q7RmFpbGVkIHRvIGF0dGFjaCBVc2VyIHRlc3R1c2VyIHRvIFZNIGZyb20gVk0gUG9vbCBUZXN0 aW5nIChVc2VyOiB0ZXN0dXNlcikmcXVvdDsuIFdpdGhvdXQgaGF2aW5nIFZNJ3MgcHJlc3RhcnRl ZCBtYWtlcyB0aGUgcHJvY2VzcyBjb21wbGV0ZSBhcyBleHBlY3RlZCwgYnV0IHRoZW4gdXNlcnMg aGF2ZSB0byB3YWl0IGZvciBWTSB0byBzdGFydCBiZWZvcmUgaGF2aW5nIGFjY2VzcyB0byB0aGUg Y29uc29sZS4gScK0dmUgcGFzdGVkIHNuaXBwZXRzIGZyb20NCiBlbmdpbmUubG9nIG91dCBvbiBw YXN0ZWJpbi48YnI+DQo8YnI+DQpTdWNjZXNzZnVsICZxdW90O1Rha2UmcXVvdDsgd2l0aCBjb2xk c3RhcnQ6PGJyPg0KPGEgaHJlZj0iaHR0cDovL3Bhc3RlYmluLmNvbS80QXc5REhtZCI+aHR0cDov L3Bhc3RlYmluLmNvbS80QXc5REhtZDwvYT48YnI+DQo8YnI+DQpGYWlsZWQgJnF1b3Q7VGFrZSZx dW90OyB3aXRoIHByZXN0YXJ0Ojxicj4NCjxhIGhyZWY9Imh0dHA6Ly9wYXN0ZWJpbi5jb20vRVM1 RjNzRDEiPmh0dHA6Ly9wYXN0ZWJpbi5jb20vRVM1RjNzRDE8L2E+PGJyPg0KPGJyPg0KIyBycG0g LXFhIHwgZ3JlcCBlbmdpbmU8YnI+DQpvdmlydC1lbmdpbmUtY29uZmlnLTMuMS4wLTQuZmMxNy5u b2FyY2g8YnI+DQpvdmlydC1lbmdpbmUtZGJzY3JpcHRzLTMuMS4wLTQuZmMxNy5ub2FyY2g8YnI+ DQpvdmlydC1lbmdpbmUtcmVzdGFwaS0zLjEuMC00LmZjMTcubm9hcmNoPGJyPg0Kb3ZpcnQtZW5n aW5lLWdlbmVyaWNhcGktMy4xLjAtNC5mYzE3Lm5vYXJjaDxicj4NCm92aXJ0LWVuZ2luZS13ZWJh ZG1pbi1wb3J0YWwtMy4xLjAtNC5mYzE3Lm5vYXJjaDxicj4NCm92aXJ0LWVuZ2luZS1zZXR1cC0z LjEuMC00LmZjMTcubm9hcmNoPGJyPg0Kb3ZpcnQtZW5naW5lLXNkay0zLjIuMC4yLTEuZmMxNy5u b2FyY2g8YnI+DQpvdmlydC1lbmdpbmUtYmFja2VuZC0zLjEuMC00LmZjMTcubm9hcmNoPGJyPg0K b3ZpcnQtZW5naW5lLXRvb2xzLWNvbW1vbi0zLjEuMC00LmZjMTcubm9hcmNoPGJyPg0Kb3ZpcnQt ZW5naW5lLTMuMS4wLTQuZmMxNy5ub2FyY2g8YnI+DQpvdmlydC1lbmdpbmUtdXNlcnBvcnRhbC0z LjEuMC00LmZjMTcubm9hcmNoPGJyPg0Kb3ZpcnQtZW5naW5lLW5vdGlmaWNhdGlvbi1zZXJ2aWNl LTMuMS4wLTQuZmMxNy5ub2FyY2g8YnI+DQo8YnI+DQpJcyB0aGVyZSBhbnl0aGluZyBlbHNlIEkg Y2FuIGJyaW5nIHRvIGhlbHAgaXJvbiBvdXQgdGhpcyBraW5rPzxicj4NCjxicj4NCjx0YWJsZSBj ZWxsc3BhY2luZz0iMCIgY2VsbHBhZGRpbmc9IjAiIHdpZHRoPSIxMDAlIj4NCjx0Ym9keT4NCjx0 cj4NCjx0ZD4tLSA8YnI+DQo8YnI+DQpNZWQgVsOkbmxpZ2EgSMOkbHNuaW5nYXI8YnI+DQotLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tPGJyPg0KS2FybGkgU2rDtmJlcmc8YnI+DQpTd2VkaXNoIFVuaXZl cnNpdHkgb2YgQWdyaWN1bHR1cmFsIFNjaWVuY2VzPGJyPg0KQm94IDcwNzkgKFZpc2l0aW5nIEFk ZHJlc3MgS3JvbsOlc3bDpGdlbiA4KTxicj4NClMtNzUwIDA3IFVwcHNhbGEsIFN3ZWRlbjxicj4N ClBob25lOiAmbmJzcDsmIzQzOzQ2LSgwKTE4LTY3IDE1IDY2PGJyPg0KPGEgaHJlZj0ibWFpbHRv OmthcmxpLnNqb2JlcmdAYWRtLnNsdS5zZSI+a2FybGkuc2pvYmVyZ0BzbHUuc2U8L2E+IDwvdGQ+ DQo8L3RyPg0KPC90Ym9keT4NCjwvdGFibGU+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_5F9E965F5A80BC468BE5F40576769F09255073F0exchange21_--

3 4

[Users] Lun snapshots by a san
by pierre Labanowski 20 Apr '13

20 Apr '13

Hello everybody, I have a question, or more precisely information or best practice. I use oVirt 3.1 with an attachment on fiber channel on my SAN. Makes it even the San snapshots that are replicated on a remote site. it's a procedure for adding a new "Storage" Domain to another Data Centers (oVirt) in order to recover the state of a VM snapshoted by the SAN? I've read the documentation on Disaster Recovery but it's for the site-to-site failover (i don't have dual architecture of ovirt) while my demand here is for the state recovered a current domain. And only to export the VM(snapshoted by a san) for restore in the current storage (production). thank you Pierre

3 3