- Users - oVirt List Archives

[Users] test day: using VM has host for vdsm
by Ryan Harper 19 Jan '12

19 Jan '12

I've created some f16 VMs that contain both ovirt-engine and a few to run vdsm as nodes. When I add in the VM host into the engine and it attempts to install vdsm (even though I've already installed vdsm) the install fails because the vdsm install script is checking to see if the host has virt capabilities; since I'm not running nested KVM, this fails. Is there a way to work around this can enable a VM to be a host in oVirt? I had heard in the past there was a way to create fake VMs when attempting to do ovirt-engine stress testing, wondering if that might be of help here. Also, are their vdsm rpms built for RHEL6.x available? Thanks! -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ryanh(a)us.ibm.com

6 11

[Users] oVirt test day
by André Felício 19 Jan '12

19 Jan '12

Hi all, I found some problems installing the oVirt. Engine on F16 e using ovirt-node I did the installation of a engine in Fedora 16 minimum. Problem #1: No suporte on ovirt-node to UEFI machine. You must run in legacy mode Problem #2: I run the engine-setup and I get the following error in the log. Certificate was added to keystore ./SignReq.sh: line 79: /var/lock/ovirt-engine/.openssl.exclusivelock: No such file or directoryfile certs/engine.cer does not exist! The /var/lock/ovirt-engine folder does not exist. After creating the folder the engine-setup ran without problem. Problem #3: Add oVirt node from Webadmin engine. # cat /tmp/vds_installer.455167.log Wed, 18 Jan 2012 19:25:37 DEBUG **** Start VDS Installation **** Wed, 18 Jan 2012 19:25:37 DEBUG get_id_line: read line oVirt Node Hypervisor release 2.2.1 (3.6.fc16). Wed, 18 Jan 2012 19:25:37 DEBUG lsb_release: input line oVirt Node Hypervisor release 2.2.1 (3.6.fc16). Wed, 18 Jan 2012 19:25:37 DEBUG lsb_release: return: oVirtNodeHypervisor. Wed, 18 Jan 2012 19:25:37 ERROR Unsupported platform: oVirtNodeHypervisor Wed, 18 Jan 2012 19:25:37 DEBUG <BSTRAP component='INSTALLER' status='FAIL' message='Unsupported platform: oVirtNodeHypervisor'/> Wed, 18 Jan 2012 19:25:37 ERROR Failed platform test. I tried the changes documented in http://www.ovirt.org/wiki/Node_Release_Notes but it still fails. On engine show "Pending Approval", I'm aprove but it still erro. I hope I have helped with this report. Tomorrow I continue the "Test Week" with Red Hat Enterprise Virtualization Node V3 beta and another configurations. -- At.te, André Felício http://www.felicio.com.br

4 3

Re: [Users] test day: using VM has host for vdsm
by Ryan Harper 18 Jan '12

18 Jan '12

* Haim Ateya <hateya(a)redhat.com> [2012-01-18 07:13]: > On Wed 18 Jan 2012 02:59:01 PM IST, Ryan Harper wrote: > >I've created some f16 VMs that contain both ovirt-engine and a few > >to run vdsm as nodes. When I add in the VM host into the engine and it > >attempts to install vdsm (even though I've already installed vdsm) the > >install fails because the vdsm install script is checking to see if the > >host has virt capabilities; since I'm not running nested KVM, this > >fails. Is there a way to work around this can enable a VM to be a host > >in oVirt? I had heard in the past there was a way to create fake VMs > >when attempting to do ovirt-engine stress testing, wondering if that > >might be of help here. > > > >Also, are their vdsm rpms built for RHEL6.x available? > > > >Thanks! > > > > Hi Rayn, > > - login to your ovirt-engine machine > - edit > /usr/share/ovirt-engine/engine.ear/components.war/vds/vds_bootstrap.py > - comment out the following: > > 836 if not oDeploy.virtExplorer(random_num): > 837 logging.error('virtExplorer test failed') > 838 return False > - reinstall host So I'm getting further, but now the bootstrap.log has more errors below. If I follow the test day instructions, it indicates to install vdsm and includes instructions, but it's clear that ovirt-engine is configured by default to push out vdsm and install it. If I've already configured and installed vdsm on the node is there any way to not attempting to bootstrap vdsm at all and just attempt to have it connect? Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='VDS PACKAGES' status='OK' result='qemu-kvm-tools' message='qemu-kvm-tools-0.15.1-3.fc16.x86_64 '/> Wed, 18 Jan 2012 08:35:37 DEBUG Basic configuration found, skipping this step Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='CreateConf' status='OK' message='Basic configuration found, skipping this step'/> Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='CheckLocalHostname' status='OK' message='Local hostname is correct.'/> Wed, 18 Jan 2012 08:35:37 DEBUG Bridge ovirtmgmt not found, need to create it. Wed, 18 Jan 2012 08:35:37 DEBUG getAddress Entry. url=http://ichigo-dom223.phx.austin.ibm.com:8080/Components/vds/ Wed, 18 Jan 2012 08:35:37 DEBUG getAddress return. address=ichigo-dom223.phx.austin.ibm.com port=8080 Wed, 18 Jan 2012 08:35:37 DEBUG makeBridge begin. Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface: read host name: ichigo-dom223.phx.austin.ibm.com Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface: using host name ichigo-dom223.phx.austin.ibm.com strIP= 192.168.68.223 Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface IP=192.168.68.223 strIface=engine Wed, 18 Jan 2012 08:35:37 ERROR makeBridge found existing bridge named: engine Wed, 18 Jan 2012 08:35:37 ERROR makeBridge errored: out= err=None ret=None Wed, 18 Jan 2012 08:35:37 DEBUG makeBridge return. Wed, 18 Jan 2012 08:35:37 ERROR addNetwork error trying to add management bridge Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='SetNetworking' status='FAIL' message='addNetwork error trying to add management bridge'/> Wed, 18 Jan 2012 08:35:37 DEBUG getAddress Entry. url=http://ichigo-dom223.phx.austin.ibm.com:8080/Components/vds/ Wed, 18 Jan 2012 08:35:37 DEBUG getAddress return. address=ichigo-dom223.phx.austin.ibm.com port=8080 Wed, 18 Jan 2012 08:35:37 DEBUG getRemoteFile start. IP = ichigo-dom223.phx.austin.ibm.com port = 8080 fileName = "/engine.ssh.key.txt" Wed, 18 Jan 2012 08:35:37 DEBUG /engine.ssh.key.txt failed in HTTPS. Retrying using HTTP. Traceback (most recent call last): File "/tmp/deployUtil.py", line 1334, in getRemoteFile conn.sock = getSSLSocket(sock, certPath) File "/tmp/deployUtil.py", line 1178, in getSSLSocket cert_reqs=ssl.CERT_REQUIRED) File "/usr/lib64/python2.7/ssl.py", line 372, in wrap_socket ciphers=ciphers) File "/usr/lib64/python2.7/ssl.py", line 132, in __init__ ciphers) SSLError: [Errno 185090050] _ssl.c:340: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib Wed, 18 Jan 2012 08:35:37 DEBUG getRemoteFile end. Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey start Wed, 18 Jan 2012 08:35:37 DEBUG Failed to read /root/.ssh/authorized_keys Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey: failed to chmod authorized_keys Traceback (most recent call last): File "/tmp/deployUtil.py", line 608, in handleSSHKey silentRestoreCon(P_ROOT_AUTH_KEYS) File "/tmp/deployUtil.py", line 576, in silentRestoreCon import selinux File "/usr/lib64/python2.7/site-packages/selinux/__init__.py", line 26, in <module> _selinux = swig_import_helper() File "/usr/lib64/python2.7/site-packages/selinux/__init__.py", line 22, in swig_import_helper _mod = imp.load_module('_selinux', fp, pathname, description) ImportError: /usr/lib64/python2.7/site-packages/selinux/_selinux.so: undefined symbol: selinux_check_access Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey end Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='SetSSHAccess' status='FAIL' message='Failed to write server~s SSH key.'/> Wed, 18 Jan 2012 08:35:37 ERROR setSSHAccess test failed Wed, 18 Jan 2012 08:35:37 DEBUG <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Wed, 18 Jan 2012 08:35:37 DEBUG **** End VDS Validation **** > - add fake_kvm_support = True to your vdsm.conf under > /etc/vdsm/vdsm.conf > - restart vdsmd service -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ryanh(a)us.ibm.com

5 10

Re: [Users] test day: using VM has host for vdsm
by Ryan Harper 18 Jan '12

18 Jan '12

* Haim Ateya <hateya(a)redhat.com> [2012-01-18 11:15]: > > > > > On Jan 18, 2012, at 19:10, Ryan Harper <ryanh(a)us.ibm.com> wrote: > > > * Rami Vaknin <rvaknin(a)redhat.com> [2012-01-18 10:49]: > >> On 01/18/2012 06:39 PM, Ryan Harper wrote: > >>> * Ayal Baron<abaron(a)redhat.com> [2012-01-18 10:35]: > >>>> > >>>> ----- Original Message ----- > >>>>> * Haim Ateya<hateya(a)redhat.com> [2012-01-18 10:15]: > >>>>>> On Wed 18 Jan 2012 06:09:46 PM IST, Ryan Harper wrote: > >>>>>>> * Haim Ateya<hateya(a)redhat.com> [2012-01-18 08:02]: > >>>>>>>> On Wed 18 Jan 2012 03:48:08 PM IST, Ryan Harper wrote: > >>>>>>>>> * Haim Ateya<hateya(a)redhat.com> [2012-01-18 07:13]: > >>>>>>>>>> On Wed 18 Jan 2012 02:59:01 PM IST, Ryan Harper wrote: > >>>>>>>>>>> I've created some f16 VMs that contain both ovirt-engine and a > >>>>>>>>>>> few > >>>>>>>>>>> to run vdsm as nodes. When I add in the VM host into the > >>>>>>>>>>> engine and it > >>>>>>>>>>> attempts to install vdsm (even though I've already installed > >>>>>>>>>>> vdsm) the > >>>>>>>>>>> install fails because the vdsm install script is checking to > >>>>>>>>>>> see if the > >>>>>>>>>>> host has virt capabilities; since I'm not running nested KVM, > >>>>>>>>>>> this > >>>>>>>>>>> fails. Is there a way to work around this can enable a VM to > >>>>>>>>>>> be a host > >>>>>>>>>>> in oVirt? I had heard in the past there was a way to create > >>>>>>>>>>> fake VMs > >>>>>>>>>>> when attempting to do ovirt-engine stress testing, wondering > >>>>>>>>>>> if that > >>>>>>>>>>> might be of help here. > >>>>>>>>>>> > >>>>>>>>>>> Also, are their vdsm rpms built for RHEL6.x available? > >>>>>>>>>>> > >>>>>>>>>>> Thanks! > >>>>>>>>>>> > >>>>>>>>>> Hi Rayn, > >>>>>>>>>> > >>>>>>>>>> - login to your ovirt-engine machine > >>>>>>>>>> - edit > >>>>>>>>>> /usr/share/ovirt-engine/engine.ear/components.war/vds/vds_bootstrap.py > >>>>>>>>>> - comment out the following: > >>>>>>>>>> > >>>>>>>>>> 836 if not oDeploy.virtExplorer(random_num): > >>>>>>>>>> 837 logging.error('virtExplorer test failed') > >>>>>>>>>> 838 return False > >>>>>>>>>> - reinstall host > >>>>>>>>> So I'm getting further, but now the bootstrap.log has more > >>>>>>>>> errors below. > >>>>>>>>> If I follow the test day instructions, it indicates to install > >>>>>>>>> vdsm and > >>>>>>>>> includes instructions, but it's clear that ovirt-engine is > >>>>>>>>> configured by > >>>>>>>>> default to push out vdsm and install it. If I've already > >>>>>>>>> configured and > >>>>>>>>> installed vdsm on the node is there any way to not attempting to > >>>>>>>>> bootstrap > >>>>>>>>> vdsm > >>>>>>>>> at all and just attempt to have it connect? > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP component='VDS PACKAGES' > >>>>>>>>> status='OK' result='qemu-kvm-tools' > >>>>>>>>> message='qemu-kvm-tools-0.15.1-3.fc16.x86_64 '/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG Basic configuration found, > >>>>>>>>> skipping > >>>>>>>>> this step > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP component='CreateConf' > >>>>>>>>> status='OK' > >>>>>>>>> message='Basic configuration found, skipping this step'/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP > >>>>>>>>> component='CheckLocalHostname' > >>>>>>>>> status='OK' message='Local hostname is correct.'/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG Bridge ovirtmgmt not found, > >>>>>>>>> need to > >>>>>>>>> create it. > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getAddress Entry. > >>>>>>>>> url=http://ichigo-dom223.phx.austin.ibm.com:8080/Components/vds/ > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getAddress return. > >>>>>>>>> address=ichigo-dom223.phx.austin.ibm.com port=8080 > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG makeBridge begin. > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface: read host name: > >>>>>>>>> ichigo-dom223.phx.austin.ibm.com > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface: using host name > >>>>>>>>> ichigo-dom223.phx.austin.ibm.com strIP= 192.168.68.223 > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG _getMGTIface > >>>>>>>>> IP=192.168.68.223 > >>>>>>>>> strIface=engine > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 ERROR makeBridge found existing > >>>>>>>>> bridge > >>>>>>>>> named: > >>>>>>>>> engine > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 ERROR makeBridge errored: out= > >>>>>>>>> err=None > >>>>>>>>> ret=None > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG makeBridge return. > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 ERROR addNetwork error trying to > >>>>>>>>> add > >>>>>>>>> management bridge > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP component='SetNetworking' > >>>>>>>>> status='FAIL' message='addNetwork error trying to add management > >>>>>>>>> bridge'/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getAddress Entry. > >>>>>>>>> url=http://ichigo-dom223.phx.austin.ibm.com:8080/Components/vds/ > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getAddress return. > >>>>>>>>> address=ichigo-dom223.phx.austin.ibm.com port=8080 > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getRemoteFile start. IP = > >>>>>>>>> ichigo-dom223.phx.austin.ibm.com port = 8080 fileName = > >>>>>>>>> "/engine.ssh.key.txt" > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG /engine.ssh.key.txt failed in > >>>>>>>>> HTTPS. > >>>>>>>>> Retrying using HTTP. > >>>>>>>>> Traceback (most recent call last): > >>>>>>>>> File "/tmp/deployUtil.py", line 1334, in getRemoteFile > >>>>>>>>> conn.sock = getSSLSocket(sock, certPath) > >>>>>>>>> File "/tmp/deployUtil.py", line 1178, in getSSLSocket > >>>>>>>>> cert_reqs=ssl.CERT_REQUIRED) > >>>>>>>>> File "/usr/lib64/python2.7/ssl.py", line 372, in wrap_socket > >>>>>>>>> ciphers=ciphers) > >>>>>>>>> File "/usr/lib64/python2.7/ssl.py", line 132, in __init__ > >>>>>>>>> ciphers) > >>>>>>>>> SSLError: [Errno 185090050] _ssl.c:340: error:0B084002:x509 > >>>>>>>>> certificate > >>>>>>>>> routines:X509_load_cert_crl_file:system lib > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG getRemoteFile end. > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey start > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG Failed to read > >>>>>>>>> /root/.ssh/authorized_keys > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey: failed to chmod > >>>>>>>>> authorized_keys > >>>>>>>>> Traceback (most recent call last): > >>>>>>>>> File "/tmp/deployUtil.py", line 608, in handleSSHKey > >>>>>>>>> silentRestoreCon(P_ROOT_AUTH_KEYS) > >>>>>>>>> File "/tmp/deployUtil.py", line 576, in silentRestoreCon > >>>>>>>>> import selinux > >>>>>>>>> File > >>>>>>>>> "/usr/lib64/python2.7/site-packages/selinux/__init__.py", > >>>>>>>>> line > >>>>>>>>> 26, > >>>>>>>>> in<module> > >>>>>>>>> _selinux = swig_import_helper() > >>>>>>>>> File > >>>>>>>>> "/usr/lib64/python2.7/site-packages/selinux/__init__.py", > >>>>>>>>> line > >>>>>>>>> 22, > >>>>>>>>> in swig_import_helper > >>>>>>>>> _mod = imp.load_module('_selinux', fp, pathname, > >>>>>>>>> description) > >>>>>>>>> ImportError: > >>>>>>>>> /usr/lib64/python2.7/site-packages/selinux/_selinux.so: > >>>>>>>>> undefined symbol: selinux_check_access > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG handleSSHKey end > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP component='SetSSHAccess' > >>>>>>>>> status='FAIL' message='Failed to write server~s SSH key.'/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 ERROR setSSHAccess test failed > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG<BSTRAP component='RHEV_INSTALL' > >>>>>>>>> status='FAIL'/> > >>>>>>>>> Wed, 18 Jan 2012 08:35:37 DEBUG **** End VDS Validation **** > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>>> - add fake_kvm_support = True to your vdsm.conf under > >>>>>>>>>> /etc/vdsm/vdsm.conf > >>>>>>>>>> - restart vdsmd service > >>>>>>>> please make sure selinux is set at least on permissive mode; > >>>>>>>> > >>>>>>>> sed -i 's/SELINUX=disabled/SELINUX=permissive/g' > >>>>>>>> /etc/sysconfig/selinux > >>>>>>>> > >>>>>>>> reboot and reinstall. > >>>>>>>> > >>>>>>>> anyhow, if this is the case, its a known issue and patch is > >>>>>>>> pending > >>>>>>>> upstream. > >>>>>>> I did this, but I was also able to just re-run the installer and > >>>>>>> bootstrap completed. However, now I have another issue. > >>>>>>> > >>>>>>> THe host is marked unresponsive in engine, engine.log shows a > >>>>>>> connectivity issue, but both hosts can ping and share data. > >>>>>>> > >>>>>>> . Stage completed. (Stage: Running second installation script on > >>>>>>> Host) > >>>>>>> 2012-01-18 09:58:08,550 INFO > >>>>>>> [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > >>>>>>> (pool-5-thread-49) RunSSHCommand returns true > >>>>>>> 2012-01-18 09:58:08,550 INFO > >>>>>>> [org.ovirt.engine.core.bll.VdsInstaller] > >>>>>>> (pool-5-thread-49) FinishCommand ended:true > >>>>>>> 2012-01-18 09:58:08,554 INFO > >>>>>>> [org.ovirt.engine.core.bll.InstallVdsCommand] (pool-5-thread-49) > >>>>>>> After > >>>>>>> Installation pool-5-thread-49 > >>>>>>> 2012-01-18 09:58:08,555 INFO > >>>>>>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>>>>>> (pool-5-thread-49) START, SetVdsStatusVDSCommand(vdsId = > >>>>>>> 8c627fa8-41d8-11e1-8d2f-00fffe0000df, status=Reboot, > >>>>>>> nonOperationalReason=NONE), log id: 703c3cbd > >>>>>>> 2012-01-18 09:58:08,560 INFO > >>>>>>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>>>>>> (pool-5-thread-49) FINISH, SetVdsStatusVDSCommand, log id: > >>>>>>> 703c3cbd > >>>>>>> 2012-01-18 09:58:08,560 INFO > >>>>>>> [org.ovirt.engine.core.bll.VdsCommand] > >>>>>>> (pool-5-thread-50) Waiting 300 seconds, for server to finish > >>>>>>> reboot > >>>>>>> process. > >>>>>>> 2012-01-18 10:03:08,561 INFO > >>>>>>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>>>>>> (pool-5-thread-50) START, SetVdsStatusVDSCommand(vdsId = > >>>>>>> 8c627fa8-41d8-11e1-8d2f-00fffe0000df, status=NonResponsive, > >>>>>>> nonOperationalReason=NONE), log id: 3e57bdd2 > >>>>>>> 2012-01-18 10:03:08,570 INFO > >>>>>>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>>>>>> (pool-5-thread-50) FINISH, SetVdsStatusVDSCommand, log id: > >>>>>>> 3e57bdd2 > >>>>>>> 2012-01-18 10:03:10,201 ERROR > >>>>>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand] > >>>>>>> (QuartzScheduler_Worker-35) XML RPC error in command > >>>>>>> GetCapabilitiesVDS ( > >>>>>>> Vds: ichigo-dom224 ), the error was: > >>>>>>> java.util.concurrent.ExecutionException: > >>>>>>> java.lang.reflect.InvocationTargetException > >>>>>>> > >>>>>>> > >>>>>>> I can query vdsm on the on the node: > >>>>>>> > >>>>>>> [root@f16-node1 ~]# vdsClient -s 0 getVdsCaps > >>>>>>> HBAInventory = {'iSCSI': [{'InitiatorName': > >>>>>>> 'iqn.1994-05.com.redhat:2abcda43e16d'}], 'FC': []} > >>>>>>> ISCSIInitiatorName = iqn.1994-05.com.redhat:2abcda43e16d > >>>>>>> bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': > >>>>>>> {}, > >>>>>>> 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': > >>>>>>> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', > >>>>>>> 'slaves': > >>>>>>> []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, > >>>>>>> 'netmask': > >>>>>>> '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': > >>>>>>> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', > >>>>>>> 'slaves': > >>>>>>> []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, > >>>>>>> 'netmask': > >>>>>>> '', 'addr': '', 'slaves': []}} > >>>>>>> clusterLevels = ['3.0'] > >>>>>>> cpuCores = 1 > >>>>>>> cpuFlags = > >>>>>>> pge,clflush,sep,syscall,tsc,vmx,cmov,nx,constant_tsc,pat,sse4_1,lm,msr,fpu,fxsr,pae,nopl,mmx,cx8,mce,de,mca,pse,pni,popcnt,apic,sse,sse4_2,lahf_lm,sse2,hypervisor,up,ssse3,cx16,pse36,mtrr,x2apicmodel_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Opteron_G1 > >>>>>>> cpuModel = Intel(Fake) CPU > >>>>>>> cpuSockets = 1 > >>>>>>> cpuSpeed = 2800.482 > >>>>>>> emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', > >>>>>>> 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] > >>>>>>> guestOverhead = 65 > >>>>>>> hooks = {} > >>>>>>> kvmEnabled = true > >>>>>>> management_ip = > >>>>>>> memSize = 7988 > >>>>>>> networks = {'ovirtmgmt': {'addr': '192.168.68.224', 'cfg': > >>>>>>> {'DEVICE': > >>>>>>> 'ovirtmgmt', 'DELAY': '0', 'BOOTPROTO': 'dhcp', 'TYPE': > >>>>>>> 'Bridge', > >>>>>>> 'ONBOOT': 'yes'}, 'ports': ['eth0'], 'netmask': > >>>>>>> '255.255.192.0', > >>>>>>> 'stp': 'off', 'gateway': '192.168.68.1'}} > >>>>>>> nics = {'eth0': {'hwaddr': '00:FF:FE:00:00:E0', 'netmask': > >>>>>>> '', > >>>>>>> 'speed': 0, 'addr': ''}} > >>>>>>> operatingSystem = {'release': '1', 'version': '16', 'name': > >>>>>>> 'Fedora'} > >>>>>>> packages2 = {'kernel': {'release': '7.fc16.x86_64', > >>>>>>> 'buildtime': > >>>>>>> 1320196248.0, 'version': '3.1.0'}, 'spice-server': > >>>>>>> {'release': > >>>>>>> '1.fc16', 'buildtime': '1321276111', 'version': '0.10.0'}, > >>>>>>> 'vdsm': > >>>>>>> {'release': '0.fc16', 'buildtime': '1326734129', 'version': > >>>>>>> '4.9.3.1'}, 'qemu-kvm': {'release': '3.fc16', 'buildtime': > >>>>>>> '1321651456', 'version': '0.15.1'}, 'libvirt': {'release': > >>>>>>> '4.fc16', > >>>>>>> 'buildtime': '1324326688', 'version': '0.9.6'}, 'qemu-img': > >>>>>>> {'release': '3.fc16', 'buildtime': '1321651456', 'version': > >>>>>>> '0.15.1'}} > >>>>>>> reservedMem = 321 > >>>>>>> software_revision = 0 > >>>>>>> software_version = 4.9 > >>>>>>> supportedProtocols = ['2.2', '2.3'] > >>>>>>> supportedRHEVMs = ['3.0'] > >>>>>>> uuid = 922F4AE6-8EEA-4B11-44C4-EA1E1D665AC2_00:FF:FE:00:00:E0 > >>>>>>> version_name = Snow Man > >>>>>>> vlans = {} > >>>>>>> vmTypes = ['kvm'] > >>>>>>> > >>>>>>> > >>>>>> can you check if problem is solved if you run iptables -F ? > >>>>> It doesn't. > >>>> can you also post the vdsm.log to see if the request made it and was > >>>> rejected for some reason? > >>> yes, I think this is the issue: > >>> > >>> Thread-1016::ERROR::2012-01-18 > >>> 11:36:50,986::SecureXMLRPCServer::73::root::(handle_error) client > >>> ('192.168.68.223', 58819) > >>> Traceback (most recent call last): > >>> File "/usr/lib64/python2.7/SocketServer.py", line 582, in > >>> process_request_thread > >>> self.finish_request(request, client_address) > >>> File "/usr/share/vdsm/SecureXMLRPCServer.py", line 66, in > >>> finish_request > >>> request.do_handshake() > >>> File "/usr/lib64/python2.7/ssl.py", line 296, in do_handshake > >>> self._sslobj.do_handshake() > >>> > >>> I have vdsm.conf with ssl=true, however, if I set ssl=false, then I > >>> cannot query vdsm from the localhost client: > >>> > >>> [root@f16-node1 vdsm]# vdsClient -s 0 getVdsCaps > >>> > >>> with ssl=false, that returns connection refused. > >>> > >>> > >> Indeed. If you want to work without ssl, you need to also change the > >> "UseSecureConnectionWithServers" option_name to "false" in vdc_options > >> table in ovirt-engine database and restart jboss-as service , so it will > >> query vdsm without SSL. > > > > ok, now with ssl=false, and the database updated and jboss-as restart, > > engine sees the host as up, but the local query of the capabilities > > fails. > > > You should run the command without the "-s" (which stands for secure). I learn something new every day. vdsClient 0 getVdsCaps works fine now. -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ryanh(a)us.ibm.com

1 0

[Users] 回复： Can't start ovirt-node
by Laurence 18 Jan '12

18 Jan '12

This is a multi-part message in MIME format. ------=_NextPart_4F1653B7_DCF7DA90_06D0EB90 Content-Type: text/plain; charset="gbk" Content-Transfer-Encoding: base64 SSd2ZSBlbmNvdW50ZXJlZCB0aGUgc2FtZSBwcm9ibGVtIQ0KIA0KIA0KLS0tLS0tLS0tLS0t LS0tLS0tINStyrzTyrz+IC0tLS0tLS0tLS0tLS0tLS0tLQ0Kt6K8/sjLOiAib3ZpcnQiPG92 aXJ0QHFpcC5ydT47DQq3osvNyrG85DogMjAxMsTqMdTCMTbI1SjQx8ba0rspIM/Czuc1OjI4 DQrK1bz+yMs6ICJ1c2VycyI8dXNlcnNAb3ZpcnQub3JnPjsgDQoNCtb3zOI6IFtVc2Vyc10g Q2FuJ3Qgc3RhcnQgb3ZpcnQtbm9kZQ0KDQogDQpIaSwgQUxMDQoNCnRvZGF5IGkgdHJ5IHRv IGluc3RhbGwgb3ZpcnQtbm9kZSBmcm9tIGlzbw0KDQpodHRwOi8vd3d3Lm92aXJ0Lm9yZy9y ZWxlYXNlcy9uaWdodGx5L2JpbmFyeS9vdmlydC1ub2RlLWltYWdlLTIuMi4xLTMuMy5mYzE2 Lmlzbw0KDQppIGluc3RhbGxlZCB0byB1c2IgZmxhc2ggMTZnYiwgaW5zdGFsbGF0aW9uIHBy b2Nlc3MgaXMgT0ssIGJ1dCAgdGhlIGZpcnN0IGJvb3QgZmluaXNoZWQgd2l0aCBtZXNzYWdl Og0KDQpkcmFjdXQgV2FybmluZzogTm8gcm9vdCBkZXZpY2UgImxpdmU6L2Rldi9kaXNrL2J5 X2xhYmVsL1Jvb3QiIGZvdW5kDQoNCkRyb3BwaW5nIHRvIGRlYnVnIHNoZWxsDQoNCkJ5ZSwN ClZhZGltDQoNCg0KDQoNCi0t ------=_NextPart_4F1653B7_DCF7DA90_06D0EB90 Content-Type: text/html; charset="gbk" Content-Transfer-Encoding: base64 PGRpdj5JJ3ZlIGVuY291bnRlcmVkIHRoZSBzYW1lIHByb2JsZW0hPC9kaXY+PGRpdj48aW5j bHVkZXRhaWw+PGRpdj4mbmJzcDs8L2Rpdj48ZGl2PiZuYnNwOzwvZGl2PjxkaXYgc3R5bGU9 ImZvbnQ6VmVyZGFuYSBub3JtYWwgMTRweDtjb2xvcjojMDAwOyI+PGRpdiBzdHlsZT0iRk9O VC1TSVpFOiAxMnB4O0ZPTlQtRkFNSUxZOiBBcmlhbCBOYXJyb3c7cGFkZGluZzoycHggMCAy cHggMDsiPi0tLS0tLS0tLS0tLS0tLS0tLSZuYnNwO9StyrzTyrz+Jm5ic3A7LS0tLS0tLS0t LS0tLS0tLS0tPC9kaXY+PGRpdiBzdHlsZT0iRk9OVC1TSVpFOiAxMnB4O2JhY2tncm91bmQ6 I2VmZWZlZjtwYWRkaW5nOjhweDsiPjxkaXYgaWQ9Im1lbnVfc2VuZGVyIj48Yj63orz+yMs6 PC9iPiZuYnNwOyJvdmlydCImbHQ7b3ZpcnRAcWlwLnJ1Jmd0Ozs8L2Rpdj48ZGl2PjxiPrei y83KsbzkOjwvYj4mbmJzcDsyMDEyxOox1MIxNsjVKNDHxtrSuykgz8LO5zU6Mjg8L2Rpdj48 ZGl2PjxiPsrVvP7Iyzo8L2I+Jm5ic3A7InVzZXJzIiZsdDt1c2Vyc0BvdmlydC5vcmcmZ3Q7 OyA8d2JyPjwvZGl2PjxkaXY+PC9kaXY+PGRpdj48Yj7W98ziOjwvYj4mbmJzcDtbVXNlcnNd IENhbid0IHN0YXJ0IG92aXJ0LW5vZGU8L2Rpdj48L2Rpdj48ZGl2PiZuYnNwOzwvZGl2Pkhp LCBBTEw8YnI+PGJyPnRvZGF5IGkgdHJ5IHRvIGluc3RhbGwgb3ZpcnQtbm9kZSBmcm9tIGlz bzxicj48YnI+aHR0cDovL3d3dy5vdmlydC5vcmcvcmVsZWFzZXMvbmlnaHRseS9iaW5hcnkv b3ZpcnQtbm9kZS1pbWFnZS0yLjIuMS0zLjMuZmMxNi5pc288YnI+PGJyPmkgaW5zdGFsbGVk IHRvIHVzYiBmbGFzaCAxNmdiLCBpbnN0YWxsYXRpb24gcHJvY2VzcyBpcyBPSywgYnV0Jm5i c3A7IHRoZSBmaXJzdCBib290IGZpbmlzaGVkIHdpdGggbWVzc2FnZTo8YnI+PGJyPmRyYWN1 dCBXYXJuaW5nOiBObyByb290IGRldmljZSAibGl2ZTovZGV2L2Rpc2svYnlfbGFiZWwvUm9v dCIgZm91bmQ8YnI+PGJyPkRyb3BwaW5nIHRvIGRlYnVnIHNoZWxsPGJyPjxicj5CeWUsPGJy PlZhZGltPGJyPjxicj48YnI+PGJyPjxicj4tLTxicj48YnI+DQoNCjwvZGl2PjwvaW5jbHVk ZXRhaWw+PC9kaXY+ ------=_NextPart_4F1653B7_DCF7DA90_06D0EB90--

2 1

[Users] Small errors on the wiki
by Jean-Francois Saucier 18 Jan '12

18 Jan '12

Hi everyone, I tried to install oVirt engine from RPM just a minute ago and found some small errors on the wiki page at : http://www.ovirt.org/wiki/Installing_ovirt-engine_from_rpm I know oVirt and RHEV pretty well but I am new to the project and has not yet contributed anything. The question I have is I wonder if I should change the wiki directly or refer to someone before doing it. This page seems to be an important one that is referred regularly and I don't want to break anything. The first error is that the ovirt-engine.repo is now at http://www.ovirt.org/releases/nightly/ovirt-engine.repo in the step "Configuring Ovirt's Repository". The second error is that you cannot run engine-cleanup at the first install you do. But the explanation state explicitly, and in bold, to run this command before _every_ installation. These are not big errors but I think they could cause some confusion to new users of oVirt. Thanks! -- Jean-Francois Saucier (djf_jeff) GPG key : 0xA9E6E953

2 1

[Users] http://bottomlineit.wordpress.com/tag/ovirt/
by Carl Trieloff 17 Jan '12

17 Jan '12

The oVirt Project bills itself as an open virtualization project providing a feature-rich server virtualization management system with advanced capabilities for hosts and guests, including high availability, live migration, storage management, system scheduler, and more. The oVirt goal is to develop a broad ecosystem of tools to make up a complete integrated platform and to deliver them on a well defined release schedule. These are components designed and tested to work together, and oVirt should become a central venue for user and developer cooperation.

1 0

[Users] oVirt node in a diskless environment
by Li, David 17 Jan '12

17 Jan '12

--_000_A0D5581BE022624487D06FF31DA39EAC46DBF15F82csmailcloudsh_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, I am totally new to this. But what I am looking for is to run oVirt nod= e on a diskless x86_64 server board. I have to pxeboot and then mount the i= nitramfs as the final root file systems. No disk or NFS is allowed. Is this possible with the current release? David --_000_A0D5581BE022624487D06FF31DA39EAC46DBF15F82csmailcloudsh_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 14 (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1>Hi, I am totally= new to this. But what I am looking for is to run oVirt node on a diskless = x86_64 server board. I have to pxeboot and then mount the initramfs as the = final root file systems. No disk or NFS is allowed. <o:p></o:p><o:p> </o:p>Is this possible wit= h the current release?<o:p></o:p><o:p> </o:p>= David<o:p></o:p><o:p>&nbs= p;</o:p></div></body></html>= --_000_A0D5581BE022624487D06FF31DA39EAC46DBF15F82csmailcloudsh_--

3 6

[Users] oVirt test day is coming tomorrow - Jan 18th - Reminder
by Moran Goldboim 17 Jan '12

17 Jan '12

This is a multi-part message in MIME format. --------------000607010809050506040100 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit All are invited to join and share your ideas, tests, and results. all details available at http://www.ovirt.org/wiki/Testing/OvirtTestDay IRC - #ovirt at irc.oftc.net hope to see you there. Moran. --------------000607010809050506040100 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#ffffff"> All are invited to join and share your ideas, tests, and results. all details available at <a class="moz-txt-link-freetext" href="http://www.ovirt.org/wiki/Testing/OvirtTestDay">http://www.ovirt.org/wiki/Testing/OvirtTestDay</a> <h2></h2> IRC - #ovirt at irc.oftc.net hope to see you there. Moran. </body> </html> --------------000607010809050506040100--

1 0

[Users] Can't start ovirt-node
by ovirt＠qip.ru 17 Jan '12

17 Jan '12

This is a message in Mime Format. If you see this, your mail reader does not support this format. --=_c0b4dde63c83b2cceb89c272f94eb284 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi, ALL=0A=0Atoday i try to install ovirt-node from iso=0A=0Ahttp://www.= ovirt.org/releases/nightly/binary/ovirt-node-image-2.2.1-3.3.fc16.iso=0A= =0Ai installed to usb flash 16gb, installation process is OK, but the f= irst boot finished with message:=0A=0Adracut Warning: No root device "li= ve:/dev/disk/by_label/Root" found=0A=0ADropping to debug shell=0A=0ABye,= =0AVadim=0A=0A-- --=_c0b4dde63c83b2cceb89c272f94eb284 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi, ALL today i try to install ovirt-node from iso http://= www.ovirt.org/releases/nightly/binary/ovirt-node-image-2.2.1-3.3.fc16.is= o i installed to usb flash 16gb, installation process is OK, but&= nbsp; the first boot finished with message: dracut Warning: No ro= ot device "live:/dev/disk/by_label/Root" found Dropping to debug= shell Bye, Vadim -- --=_c0b4dde63c83b2cceb89c272f94eb284--

2 1