- Users - oVirt List Archives

Data recovery from (now unused, but still mounted) Gluster Volume for a single VM
by David White 06 Aug '21

06 Aug '21

My hyperconverged cluster was running out of space. The reason for that is a good problem to have - I've grown more in the last 4 months than in the past 4-5 years combined. But the downside was, I had to go ahead and upgrade my storage, and it became urgent to do so. I began that process last week. I have 3 volumes: [root@cha2-storage dwhite]# gluster volume list data engine vmstore I did the following on all 3 of my volumes: 1) Converted cluster from Replica 3 to Replica 2, arbiter 1 - I did run into an issue where some VMs were paused, but I was able to poweroff and power on those VMs again with no issue 2) Ran the following on Host 2: # gluster volume remove-brick data replica 1 cha1-storage.mgt.my-domain.com:/gluster_bricks/data/data force # gluster volume remove-brick vmstore replica 1 cha1-storage.mgt.my-domain.com:/gluster_bricks/vmstore/vmstore force # gluster volume remove-brick engine replica 1 cha1-storage.mgt.my-domain.com:/gluster_bricks/engine/engine force (rebuilt the array & reboot the server -- when I rebooted, I commented out the original UUIDs from /etc/fstab for the gluster storage) # lvcreate -L 2157G --zero n -T gluster_vg_sdb/gluster_thinpool_gluster_vg_sdb # lvcreate -L 75G -n gluster_lv_engine gluster_vg_sdb # lvcreate -V 600G --thin -n gluster_lv_data gluster_vg_sdb/gluster_thinpool_gluster_vg_sdb # lvcreate -V 1536G --thin -n gluster_lv_vmstore gluster_vg_sdb/gluster_thinpool_gluster_vg_sdb # mkfs.xfs /dev/gluster_vg_sdb/gluster_lv_engine # mkfs.xfs /dev/gluster_vg_sdb/gluster_lv_data # mkfs.xfs /dev/gluster_vg_sdb/gluster_lv_vmstore At this point, I ran lsblk --fs to get the new UUIDs, and put them into /etc/fstab # mount -a # gluster volume add-brick engine replica 2 cha2-storage.mgt.my-domain.com:/gluster_bricks/engine/engine force # gluster volume add-brick vmstore replica 2 cha2-storage.mgt.my-domain.com:/gluster_bricks/vmstore/vmstore force # gluster volume add-brick data replica 2 cha2-storage.mgt.my-domain.com:/gluster_bricks/data/data force So far so good. 3) I was running critically low on disk space on the replica, so I:- Let the gluster volume heal - Then I removed the Host 1 bricks from the volumes When I removed the Host 1 bricks, I made sure that there were no additional healing tasks, then proceeded to do so:# gluster volume remove-brick data replica 1 cha1-storage.mgt.my-domain.com:/gluster_bricks/data/data force # gluster volume remove-brick vmstore replica 1 cha1-storage.mgt.my-domain.com:/gluster_bricks/vmstore/vmstore force At this point, I ran into problems. All of my VMs went into a Paused state, and I had to reboot all of them. All VMs came back online, but two VMs were corrupted. I wound up re-building them from scratch. Unfortunately, we lost a lot of data on 1 of the VMs, as I didn't realize backups were broken on that particular VM. Is there a way for me to go into those disks (that are still mounted to Host 1), examine the Gluster content, and somehow mount / recover the data from the VM that we lost? Sent with ProtonMail Secure Email.

4 9

non-critical request - Disk volume label - Web-ui
by Jorge Visentini 06 Aug '21

06 Aug '21

Hi everyone! Firstly, congratulations for the evolution of the oVirt 4.4.7. A *non-critical* request for a future version... if possible, add a label in disk volumes, in Web-ui. Thank you all! [image: image.png] -- Att, Jorge Visentini +55 55 98432-9868

1 0

Wondering a way to create a universal USB Live OS to connect to VM Portal
by eta.entropy＠gmail.com 06 Aug '21

06 Aug '21

Hi All, once oVirt Infrastracture has been setup, VMs created, assigned to users and they manage them through VM Portal, I'm wondering if there is an easy way to provide to end users a USB key that will just > plug into any computer or boot from it > connect to given VM Portal to manage assigned VMs > connect to given SPICE console to enter assigned VMs Just like a Linux Live USB with preconfigured service to be started and to connect to VM Portal or SPICE console Is there something already available to start from ? Is this something doable or am I dreaming ? Thanks for any input

1 0

Question about PCI storage passthrough for a single guest VM
by Tony Pearce 06 Aug '21

06 Aug '21

I have configured a host with pci passthrough for GPU pass through. Using this knowledge I went ahead and configured nvme SSD pci pass through. On the guest, I partitioned and mounted the SSD without any issues. Searching google for this exact setup I only see results about "local storage" where local storage = using a disk image on the hosts storage. So I have come here to try and find out if there are any concerns or gripes or issues with using nvme pci pass through compared to local storage. Some more detail about the setup: I have 2 identical hosts (nvidia gpu and also nvme pci SSD). A few weeks ago when I started researching converting one of these systems over (from native ubuntu) to ovirt using gpu pci pass through I found the information about local storage. I have 1 host (host #1) set up with local storage mode and the guest VM is using a disk image on this local storage. Host 2 has an identical hardware setup but I did not configure local storage for this host. Instead, I have the ovirt host OS installed on a SATA HDD and the nvme SSD is in pci pass through to a different guest instance. What I notice is Host 2 disk performance is approx. +30% increase over host #1 when running simple dd tests to write data to the disk. So at first glance it appears the nvme pci pass through gives better performance and this is desired, but I have not seen any ovirt documentation that explains that this is supported or any guidelines on configuring such a setup. Aside from the usual caveats when running pci pass through, are there any other gotchya's when running this type of setup (pci nvme ssd pass through)? I am trying to discover any unknowns about this before I use this for real data. I have no previous experience with this and this is my main reason for emailing the group. Any insight appreciated. Kind regards, Tony Pearce

2 3

glance.ovirt.org planned outage: 10.08.2021 at 01:00 UTC
by Evgheni Dereveanchin 06 Aug '21

06 Aug '21

Hi everyone, There's an outage scheduled in order to move glance.ovirt.org to new hardware. This will happen after midnight the upcoming Tuesday between 1AM and 3AM UTC. It will not be possible to pull images from our Glance image registry during this period. Other services will not be affected. If you see any CI jobs failing on Glance tests - please re-run them in the morning after the planned outage window is over. If issues persist please report it via JIRA or reach out to me personally. -- Regards, Evgheni Dereveanchin

1 0

[ANN] oVirt 4.4.8 Fourth Release Candidate is now available for testing
by Sandro Bonazzola 06 Aug '21

06 Aug '21

oVirt 4.4.8 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.8 Fourth Release Candidate for testing, as of August 6th, 2021. This update is the eighth in a series of stabilization updates to the 4.4 series. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.8 release highlights: http://www.ovirt.org/release/4.4.8/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.8/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

Is there a way to support Mellanox OFED with oVirt/RHV?
by Vinícius Ferrão 05 Aug '21

05 Aug '21

Hello, Is there a way to keep Mellanox OFED and oVirt/RHV playing nice with each other? The real issue is regarding GlusterFS. It seems to be a Mellanox issue, but I would like to know if there's something that we can do make both play nice on the same machine: [root@rhvepyc2 ~]# dnf update --nobest Updating Subscription Management repositories. Last metadata expiration check: 0:14:25 ago on Wed 04 Aug 2021 02:01:11 AM -03. Dependencies resolved. Problem: both package mlnx-ofed-all-user-only-5.4-1.0.3.0.rhel8.4.noarch and mlnx-ofed-all-5.4-1.0.3.0.rhel8.4.noarch obsolete glusterfs-rdma - cannot install the best update candidate for package glusterfs-rdma-6.0-49.1.el8.x86_64 - package ovirt-host-4.4.7-1.el8ev.x86_64 requires glusterfs-rdma, but none of the providers can be installed - package mlnx-ofed-all-5.4-1.0.3.0.rhel8.4.noarch obsoletes glusterfs-rdma provided by glusterfs-rdma-6.0-49.1.el8.x86_64 - package glusterfs-rdma-3.12.2-40.2.el8.x86_64 requires glusterfs(x86-64) = 3.12.2-40.2.el8, but none of the providers can be installed - package glusterfs-rdma-6.0-15.el8.x86_64 requires glusterfs(x86-64) = 6.0-15.el8, but none of the providers can be installed - package glusterfs-rdma-6.0-20.el8.x86_64 requires glusterfs(x86-64) = 6.0-20.el8, but none of the providers can be installed - package glusterfs-rdma-6.0-37.el8.x86_64 requires glusterfs(x86-64) = 6.0-37.el8, but none of the providers can be installed - package glusterfs-rdma-6.0-37.2.el8.x86_64 requires glusterfs(x86-64) = 6.0-37.2.el8, but none of the providers can be installed - cannot install both glusterfs-3.12.2-40.2.el8.x86_64 and glusterfs-6.0-49.1.el8.x86_64 - cannot install both glusterfs-6.0-15.el8.x86_64 and glusterfs-6.0-49.1.el8.x86_64 - cannot install both glusterfs-6.0-20.el8.x86_64 and glusterfs-6.0-49.1.el8.x86_64 - cannot install both glusterfs-6.0-37.el8.x86_64 and glusterfs-6.0-49.1.el8.x86_64 - cannot install both glusterfs-6.0-37.2.el8.x86_64 and glusterfs-6.0-49.1.el8.x86_64 - cannot install the best update candidate for package ovirt-host-4.4.7-1.el8ev.x86_64 - cannot install the best update candidate for package glusterfs-6.0-49.1.el8.x86_64 ============================================================================================================================================================= Package Architecture Version Repository Size ============================================================================================================================================================= Installing dependencies: openvswitch x86_64 2.14.1-1.54103 mlnx_ofed_5.4-1.0.3.0_base 17 M ovirt-openvswitch noarch 2.11-1.el8ev rhv-4-mgmt-agent-for-rhel-8-x86_64-rpms 8.7 k replacing rhv-openvswitch.noarch 1:2.11-7.el8ev unbound x86_64 1.7.3-15.el8 rhel-8-for-x86_64-appstream-rpms 895 k Skipping packages with conflicts: (add '--best --allowerasing' to command line to force their upgrade): glusterfs x86_64 3.12.2-40.2.el8 rhel-8-for-x86_64-baseos-rpms 558 k glusterfs x86_64 6.0-15.el8 rhel-8-for-x86_64-baseos-rpms 658 k glusterfs x86_64 6.0-20.el8 rhel-8-for-x86_64-baseos-rpms 659 k glusterfs x86_64 6.0-37.el8 rhel-8-for-x86_64-baseos-rpms 663 k glusterfs x86_64 6.0-37.2.el8 rhel-8-for-x86_64-baseos-rpms 662 k Skipping packages with broken dependencies: glusterfs-rdma x86_64 3.12.2-40.2.el8 rhel-8-for-x86_64-baseos-rpms 49 k glusterfs-rdma x86_64 6.0-15.el8 rhel-8-for-x86_64-baseos-rpms 46 k glusterfs-rdma x86_64 6.0-20.el8 rhel-8-for-x86_64-baseos-rpms 46 k glusterfs-rdma x86_64 6.0-37.2.el8 rhel-8-for-x86_64-baseos-rpms 48 k glusterfs-rdma x86_64 6.0-37.el8 rhel-8-for-x86_64-baseos-rpms 48 k Transaction Summary ============================================================================================================================================================= Install 3 Packages Skip 10 Packages Total size: 18 M Is this ok [y/N]: I really don't care for GlusterFS on this cluster, but Mellanox OFED is much more relevant do me. Thank you all, Vinícius.

3 7

import from vmware provider always failis
by edp＠maddalena.it 05 Aug '21

05 Aug '21

Hi. I have created a new vmware provider to connet to my vmware esxi node. But I have this problem. If I choose to import a vm from that provider, the process always fails. But the errror message is generic: "failed to import vm xyz to Data Center Default, Cluster Default" I have tried to import both Linux and Windows Vms without success. I can see that the import phase go on through importing virtual disk and then when the import process comes almost to the end I get the generic error stated above. There is a place where I can see more detailed logs to solve this problem? Thank you

3 2

Terrible Disk Performance on Windows 10 VM
by regloff＠gmail.com 05 Aug '21

05 Aug '21

I recently installed a Windows 10 VM under oVirt 4.4.5.11-1.el8 Also installed the drivers using "virtio-win-1.9.16.iso" (Then re-installed them after updates just in case it helped) I found a similar complaint with VMWare (https://communities.vmware.com/t5/VMware-Workstation-Pro/vmware-workstation…) So I looked into that and made a registry change for the AHCI controller, as well as setting the 'viodiskcache' to write-back (Seen in another thread on here) - those two changes seemed to help.. marginally. But not much at all. When I do just about anything, disk usage spikes to 100% and stays there for quite a while. Write speeds rarely break 100kb/sec. Not even sure what to look for next. My Linux VMs don't seem to have this issue and the host it's running on is barely working at all. CPU and memory stay close to unused. oVirt didn't show a lot, but in task manager in the Windows VM - you can see disk queue just pegged completely. I've given the VM 6GB of RAM, so that's not it. I even turned off paging in the Windows VM as well, to no avail. This is an example of disk usage, just opening 'Groove Music' for the first time. https://i.postimg.cc/FRLq28Mw/Disk-Activity.png Any ideas? :)

6 13

Question about pci passthrough for guest (SSD passthrough) ?
by Tony Pearce 05 Aug '21

05 Aug '21

I have recently added a fresh installed host on 4.4, with 3 x nvidia gpu's which have been passed through to a guest VM instance. This went very smoothly and the guest can use all 3 host GPUs. The next thing we did was to configure "local storage" so that the single guest instance can make use of faster nvme storage (100,000 iops) compared to the network iscsi storage which is rated at 35,000 iops. The caveat with local storage is that I can only use the remaining free space in /var/ for disk images. The result is the 1TB SSD has around 700GB remaining free space. So I was wondering about simply passing through the nvme ssd (PCI) to the guest, so the guest can utilise the fill SSD. Are there any "gotcha's" with doing this other than the usual gpu passthrough ones? Also my apologies if this is duplicated. I originally asked this [1] a couple of days ago but I am not sure what happened. Kind regards, Tony Pearce [1] Question about pci pass-thru - Users - Ovirt List Archives <https://lists.ovirt.org/archives/list/users@ovirt.org/thread/BN7XHUN2DP6RQG…>

3 2