- Users - oVirt List Archives

ovirt (two nodes & iscsi san)
by edp＠maddalena.it 16 Jul '21

16 Jul '21

Hi. i am trying to set up an environment with two ovirt nodes connected to a san in iscsi. every node has a direct connection to the san (with a point-to-point connection). so every node talks with the san on a different iscsi channel with a different ip. in this case (i have just tried) when I shut down ovirt-node1 the ovirt-engine cannot restart automatically on ovirt-node2. maybe this because when I have configured hosted engine I have moved the engine storage to the iscsi lun that only the node1 can see (the ovirt-engine-setup asks for the iscsi ip address). In this case how can I resovle my problem? other than moving the ovirt-engine from one node to the other I have also to publish other luns to both ovirt nodes. but if every node talks only with one channel of the iscsi san I think that this won't working. If i put a 10 gb switch between ovirt-nodes and san channels can working? what I would like to do is connect the two ovirt nodes to the switch and also the two iscsi channels of the san to the switch. in this way each node should be able to talk to the san on both ip (iscsi channels) thank you

1 1

How to limit number of snapshots per vm
by dhanaraj.ramesh＠yahoo.com 16 Jul '21

16 Jul '21

Hi Team, How do I limit snapshots to certain number within the cluster, or Global setting level. Any help appreciated

1 0

random adapter (NIC) resets on oVirt Node 4.4.6
by Tivon Häberlein 15 Jul '21

15 Jul '21

Hi, I've been trying to get oVirt Node 4.4.6 up and running on my Dell r620 hosts but am facing a strange issue where seemingly all network adapters get reset at random times after install. The interfaces reset as soon as a bit of traffic is flowing through them. Also the logs show nfs timeouts. This only happens after I have installed the host using the oVirt engine and it also only happens when the host is connected to the engine. When the host is in maintenance mode it also seems to work fine. The host and networks work fine when its by itself (I tested right after install using the ISO and also after I have removed the host from the cluster) I cant figure why this is happening. Am I missing something? I've been stuck on this for the last couple of weeks, a bit of help would be much appreciated. Thank you! My cluster is looking like this: Engine: oVirt 4.4.6 - CentOS Linux release 8.3.2011 host1: oVirt 4.4 repository on CentOS Linux release 8.4.2105 host2: oVirt 4.4 repository on CentOS Linux release 8.4.2105 host3 (this is the one I'm trying to install): oVirt node 4.4.6 -- Best regards Tivon Häberlein

4 8

Re: oVirt and ARM
by Milan Zamazal 15 Jul '21

15 Jul '21

Marko Vrgotic <M.Vrgotic(a)activevideo.com> writes: > Dear Arik and Milan, > > In the meantime, I was asked to check if in current 4.4 version or > coming 4.5, are/will there any capabilities or options of emulating > aarch64 on x86_64 platform and if so, what would be the steps to > test/enable it. > > Can you provide some information? Hi Marko, I don't think there is a way to emulate a non-native architecture. Engine doesn't have ARM support and it cannot handle ARM (native or emulated) hosts. You could try to run emulated ARM VMs presented as x86 to Engine using Vdsm hooks but I doubt it would work. I'm afraid the only way is to add ARM support to oVirt. My former colleague has played with running oVirt on Raspberry Pi hosts some years ago (there are traces of that effort in Vdsm) and I think adding ARM support should be, at least in theory, possible. Particular features available would be mostly dependent on ARM support in QEMU and libvirt. Regards, Milan > ----- > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > ActiveVideo > o: +31 (35) 6774131 > m: +31 (65) 5734174 > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > w: www.activevideo.com<http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > > > From: Sandro Bonazzola <sbonazzo(a)redhat.com> > Date: Friday, 9 July 2021 at 15:37 > To: Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Arik Hadas > <ahadas(a)redhat.com>, Milan Zamazal <mzamazal(a)redhat.com> > Cc: Evgheni Dereveanchin <ederevea(a)redhat.com>, Zhenyu Zheng > <zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, > users(a)ovirt.org <users(a)ovirt.org> > Subject: Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do > not click links or open attachments unless you recognize the > sender!!!*** > > > Il giorno ven 9 lug 2021 alle ore 11:00 Marko Vrgotic > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > scritto: > Hi Sandro and the rest of oVirt gurus, > > My managers are positive regarding helping provide some ARM hardware, > but it would not happened earlier than three months from now, as we > are in process of establishing certain relationship with ARM HW > vendor. > > T news! > > > In the meantime, I was asked to check if in current 4.4 version or > coming 4.5, are/will there any capabilities or options of emulating > aarch64 on x86_64 platform and if so, what would be the steps to > test/enable it. > > +Arik Hadas<mailto:ahadas@redhat.com> , +Milan Zamazal<mailto:mzamazal@redhat.com> ? > > > Kindly awaiting your reply. > > Marko Vrgotic > > From: Marko Vrgotic <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> > Date: Monday, 28 June 2021 at 15:38 > To: Sandro Bonazzola > <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>>, Evgheni > Dereveanchin <ederevea(a)redhat.com<mailto:ederevea@redhat.com>> > Cc: Zhenyu Zheng > <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, Joey Ma > <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>>, > users(a)ovirt.org<mailto:users@ovirt.org> > <users(a)ovirt.org<mailto:users@ovirt.org>> > Subject: Re: [ovirt-users] oVirt and ARM > Hi Sandro, > > I will check with my managers if we have and could spare some hardware > to contribute developing for oVirt. > > > ----- > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > ActiveVideo > o: +31 (35) 6774131 > m: +31 (65) 5734174 > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > w: www.activevideo.com<http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > > > From: Sandro Bonazzola <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>> > Date: Friday, 25 June 2021 at 15:26 > To: Marko Vrgotic > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>>, Evgheni > Dereveanchin <ederevea(a)redhat.com<mailto:ederevea@redhat.com>> > Cc: Zhenyu Zheng > <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, Joey Ma > <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>>, > users(a)ovirt.org<mailto:users@ovirt.org> > <users(a)ovirt.org<mailto:users@ovirt.org>> > Subject: Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do > not click links or open attachments unless you recognize the > sender!!!*** > > > Il giorno ven 25 giu 2021 alle ore 14:20 Marko Vrgotic > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > scritto: > Hi Sandro, > > Thank you for the update. I am not equipped to help on development > side, but I can most certainly do test deployments, once there is > something available. > > We are big oVirt shop and moving to ARM64 with new product, it would > be great if oVirt would start supporting it. > > If we are able to help somehow, let me know. > > I guess a start could be adding some arm64 machine to oVirt > infrastructure so developers can build for it. > You can have a look at > https://ovirt.org/community/get-involved/donate-hardware.html<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.org…> > Looping in +Evgheni Dereveanchin<mailto:ederevea@redhat.com> in case you can share some resources. > > > > > ----- > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > ActiveVideo > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > w: www.activevideo.com<http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > > > From: Sandro Bonazzola <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>> > Date: Thursday, 24 June 2021 at 18:21 > To: Marko Vrgotic > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>>, Zhenyu > Zheng <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, > Joey Ma <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>> > Cc: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> > Subject: Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do > not click links or open attachments unless you recognize the > sender!!!*** > > > Il giorno gio 24 giu 2021 alle ore 16:34 Marko Vrgotic > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > scritto: > Hi oVirt, > > Where can I find if there are any information about oVirt supporting arm64 CPU architecture? > > Right now oVirt is not supporting arm64. There was an initiative about > supporting it started some time ago from openEuler ovirt SIG. > I didn't got any further updates on this topic, looping in those who I remember being looking into it. > I think that if someone contributes arm64 support it would also be a feature worth a 4.5 release :-) > > > ----- > kind regards/met vriendelijke groeten > > Marko Vrgotic > Sr. System Engineer @ System Administration > > ActiveVideo > o: +31 (35) 6774131 > m: +31 (65) 5734174 > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > w: www.activevideo.com<http://www.activevideo.com> > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > 1.1217 WJ Hilversum, The Netherlands. The information contained in > this message may be legally privileged and confidential. It is > intended to be read only by the individual or entity to whom it is > addressed or by their designee. If the reader of this message is not > the intended recipient, you are on notice that any distribution of > this message, in any form, is strictly prohibited. If you have > received this message in error, please immediately notify the sender > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > delete or destroy any copy of this message. > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> > Privacy Statement: > https://www.ovirt.org/privacy-policy.html<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQ3XND2NKIL7V…<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> > > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat > EMEA<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > Error! Filename not > specified.<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours. > > > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat > EMEA<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > Error! Filename not > specified.<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours. > > > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > [https://static.redhat.com/libs/redhat/brand-assets/2/corp/logo--200.png]<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmojo.redh…>

3 4

Blog post - Using Ceph only storage for oVirt datacenter
by Sandro Bonazzola 15 Jul '21

15 Jul '21

Hi, I just published the result of the testing of oVirt 4.4.7 with Ceph Pacific and RDO Victoria for deploying an oVirt datacenter using Ceph as storage with a blog post at https://blogs.ovirt.org/2021/07/using-ceph-only-storage-for-ovirt-datacente… Comments and suggestions are welcome. Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

4 7

Automatic Shutdown / Startup for Hosted-Engine
by Eugène Ngontang 14 Jul '21

14 Jul '21

Hi, I understood we have to put hosted-engine into maintenance mode and shutdown the VMs if we want to power off the host (otherwise it will reboot). I'm setting up a process to - put the HestedEngine in global maintenance mode (*hosted-engine --set-maintenance --mode=global*) - shutdown the HostedEngine (*hosted-engine --vm-shutdown*) - PowerOff the HostedEngine (*hosted-engine --vm-poweroff*) - Power off the server (*shutdown -P*) Everything works fine and I can start the server back up, remove the HostedEngine from maintenance mode, and it will start automatically running. The issue is when bringing up hosted-engine: all VMs come up but one (*BigIP*) and I am trying to see if there is way to bring it up without having to store the engine password (using the *ovirt_vm* API). At the moment, I am having to look for the BigIP VM and then use credentials to bring it up: it will not come up with 'hosted-engine --vm-start' Is there to make this specific VM start the same time as the others VM automatically when HostedEngine starts? Thanks for your help. Regards, Eugène NG -- LesCDN <http://lescdn.com> engontang(a)lescdn.com ------------------------------------------------------------ *Aux hommes il faut un chef, et au* * chef il faut des hommes!L'habit ne fait pas le moine, mais lorsqu'on te voit on te juge!*

1 1

[ANN] Async oVirt Node release for oVirt 4.4.7.1
by Lev Veyde 14 Jul '21

14 Jul '21

On July 14th 2021 the oVirt project released an async update of oVirt Node (4.4.7.1) Changes: - Updated ovirt-hosted-engine-setup-2.5.2 - Updated imgbased to 1.2.23 (Fixes BZ#1979624 <https://bugzilla.redhat.com/show_bug.cgi?id=1979624>) - Uses 5.2.0 Qemu packages (Fixes BZ#1981005 <https://bugzilla.redhat.com/show_bug.cgi?id=1981005>) ovirt-node-4.4.7 ovirt-node-4.4.7.1 NetworkManager 1.32.0-1.el8 1.32.2-1.el8 NetworkManager-config-server 1.32.0-1.el8 1.32.2-1.el8 NetworkManager-libnm 1.32.0-1.el8 1.32.2-1.el8 NetworkManager-ovs 1.32.0-1.el8 1.32.2-1.el8 NetworkManager-team 1.32.0-1.el8 1.32.2-1.el8 NetworkManager-tui 1.32.0-1.el8 1.32.2-1.el8 autofs 5.1.4-71.el8 5.1.4-74.el8 glib2 2.56.4-13.el8 2.56.4-14.el8 glibc 2.28-160.el8 2.28-161.el8 glibc-common 2.28-160.el8 2.28-161.el8 glibc-langpack-en 2.28-160.el8 2.28-161.el8 imgbased 1.2.21-1.el8 1.2.23-1.el8 kexec-tools 2.0.20-52.el8 2.0.20-53.el8 libblockdev 2.24-6.el8 2.24-7.el8 libblockdev-crypto 2.24-6.el8 2.24-7.el8 libblockdev-dm 2.24-6.el8 2.24-7.el8 libblockdev-fs 2.24-6.el8 2.24-7.el8 libblockdev-kbd 2.24-6.el8 2.24-7.el8 libblockdev-loop 2.24-6.el8 2.24-7.el8 libblockdev-lvm 2.24-6.el8 2.24-7.el8 libblockdev-mdraid 2.24-6.el8 2.24-7.el8 libblockdev-mpath 2.24-6.el8 2.24-7.el8 libblockdev-nvdimm 2.24-6.el8 2.24-7.el8 libblockdev-part 2.24-6.el8 2.24-7.el8 libblockdev-plugins-all 2.24-6.el8 2.24-7.el8 libblockdev-swap 2.24-6.el8 2.24-7.el8 libblockdev-utils 2.24-6.el8 2.24-7.el8 libblockdev-vdo 2.24-6.el8 2.24-7.el8 libepoxy 1.5.3-1.el8 1.5.8-1.el8 libipa_hbac 2.5.1-1.el8 2.5.1-2.el8 libjpeg-turbo 1.5.3-10.el8 1.5.3-11.el8 librados2 16.2.4-1.el8s 16.2.5-1.el8s librbd1 16.2.4-1.el8s 16.2.5-1.el8s librepo 1.14.0-1.el8 1.14.0-2.el8 libsss_autofs 2.5.1-1.el8 2.5.1-2.el8 libsss_certmap 2.5.1-1.el8 2.5.1-2.el8 libsss_idmap 2.5.1-1.el8 2.5.1-2.el8 libsss_nss_idmap 2.5.1-1.el8 2.5.1-2.el8 libsss_simpleifp 2.5.1-1.el8 2.5.1-2.el8 libsss_sudo 2.5.1-1.el8 2.5.1-2.el8 llvm-compat-libs 11.0.1-1.module_el8.5.0+840+21214faf llvm-libs 12.0.0-1.module_el8.5.0+840+21214faf mesa-dri-drivers 21.1.3-1.el8 21.1.3-1.el8.0.1 mesa-filesystem 21.1.3-1.el8 21.1.3-1.el8.0.1 mesa-libEGL 21.1.3-1.el8 21.1.3-1.el8.0.1 mesa-libGL 21.1.3-1.el8 21.1.3-1.el8.0.1 mesa-libgbm 21.1.3-1.el8 21.1.3-1.el8.0.1 mesa-libglapi 21.1.3-1.el8 21.1.3-1.el8.0.1 nettle 3.4.1-4.el8_3 3.4.1-5.el8 nmstate 1.1.0-0.5.alpha4.el8 1.1.0-0.6.alpha6.el8 nmstate-plugin-ovsdb 1.1.0-0.5.alpha4.el8 1.1.0-0.6.alpha6.el8 nss 3.67.0-2.el8_4 3.67.0-4.el8_4 nss-softokn 3.67.0-2.el8_4 3.67.0-4.el8_4 nss-softokn-freebl 3.67.0-2.el8_4 3.67.0-4.el8_4 nss-sysinit 3.67.0-2.el8_4 3.67.0-4.el8_4 nss-tools 3.67.0-2.el8_4 3.67.0-4.el8_4 nss-util 3.67.0-2.el8_4 3.67.0-4.el8_4 ovirt-hosted-engine-setup 2.5.1-1.el8 2.5.2-1.el8 ovirt-node-ng-image-update-placeholder 4.4.7-1.el8 4.4.7.1-1.el8 ovirt-openvswitch 2.11-0.2021060703.el8 2.11-1.el8 ovirt-openvswitch-ovn 2.11-0.2021060703.el8 2.11-1.el8 ovirt-openvswitch-ovn-common 2.11-0.2021060703.el8 2.11-1.el8 ovirt-openvswitch-ovn-host 2.11-0.2021060703.el8 2.11-1.el8 ovirt-python-openvswitch 2.11-0.2021060703.el8 2.11-1.el8 ovirt-release-host-node 4.4.7-1.el8 4.4.7.1-1.el8 ovirt-release44 4.4.7-1.el8 4.4.7.1-1.el8 pacemaker-cluster-libs 2.1.0-2.el8 2.1.0-3.el8 pacemaker-libs 2.1.0-2.el8 2.1.0-3.el8 pacemaker-schemas 2.1.0-2.el8 2.1.0-3.el8 python3-blockdev 2.24-6.el8 2.24-7.el8 python3-imgbased 1.2.21-1.el8 1.2.23-1.el8 python3-libipa_hbac 2.5.1-1.el8 2.5.1-2.el8 python3-libnmstate 1.1.0-0.5.alpha4.el8 1.1.0-0.6.alpha6.el8 python3-sss 2.5.1-1.el8 2.5.1-2.el8 python3-sss-murmur 2.5.1-1.el8 2.5.1-2.el8 python3-sssdconfig 2.5.1-1.el8 2.5.1-2.el8 qemu-guest-agent 6.0.0-19.el8s 5.2.0-16.el8s qemu-img 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-block-curl 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-block-gluster 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-block-iscsi 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-block-rbd 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-block-ssh 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-common 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-core 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-ui-opengl 6.0.0-19.el8s 5.2.0-16.el8s qemu-kvm-ui-spice 6.0.0-19.el8s 5.2.0-16.el8s selinux-policy 3.14.3-71.el8 3.14.3-72.el8 selinux-policy-targeted 3.14.3-71.el8 3.14.3-72.el8 sssd-client 2.5.1-1.el8 2.5.1-2.el8 sssd-common 2.5.1-1.el8 2.5.1-2.el8 sssd-common-pac 2.5.1-1.el8 2.5.1-2.el8 sssd-dbus 2.5.1-1.el8 2.5.1-2.el8 sssd-ipa 2.5.1-1.el8 2.5.1-2.el8 sssd-kcm 2.5.1-1.el8 2.5.1-2.el8 sssd-krb5-common 2.5.1-1.el8 2.5.1-2.el8 sssd-tools 2.5.1-1.el8 2.5.1-2.el8 -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

a kind reminder oVirt 2021 CfP closing in 11 days
by Sandro Bonazzola 14 Jul '21

14 Jul '21

Hi, a kind reminder oVirt 2021 CfP closing in 11 days. More details: https://blogs.ovirt.org/ovirt-2021-online-conference/ Looking forward to user stories, developers onboarding journeys, integration stories, new features presentation, old features nobody knows about because nobody presented them before and more you see fit. -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

Re: oVirt and ARM
by Arik Hadas 14 Jul '21

14 Jul '21

On Tue, Jul 13, 2021 at 10:45 PM Marko Vrgotic <M.Vrgotic(a)activevideo.com> wrote: > Dear Arik and Milan, > > > > In the meantime, I was asked to check if in current 4.4 version or coming > 4.5, are/will there any capabilities or options of emulating aarch64 on > x86_64 platform and if so, what would be the steps to test/enable it. > > > > Can you provide some information? > oVirt doesn't support fully emulated workloads out of the box. The architecture of the guest is determined by that of the cluster [1] and the latter is either set automatically based on the hosts in the cluster or set explicitly by the user in which case we enforce the hosts to comply with that setting. It could be nice to see it picked up by someone in the community if fully emulated workloads are desired. We don't have anything about this in our backlog at this point. In the meantime, the easiest way to have fully emulated AArch64 workloads would probably be by using a VDSM hook that modifies the VM configuration before it starts (e.g., changing the 'emulator' to /usr/bin/qemu-system-aarch64, changing the 'os' tag, etc). See [2] for how it was suggested to emulate ARM. [1] https://github.com/oVirt/ovirt-engine/blob/ovirt-engine-4.4.8/backend/manag… [2] https://fedoraproject.org/wiki/Architectures/ARM/HowToQemu#Installing_the_A… > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > > > *From: *Sandro Bonazzola <sbonazzo(a)redhat.com> > *Date: *Friday, 9 July 2021 at 15:37 > *To: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Arik Hadas < > ahadas(a)redhat.com>, Milan Zamazal <mzamazal(a)redhat.com> > *Cc: *Evgheni Dereveanchin <ederevea(a)redhat.com>, Zhenyu Zheng < > zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, users(a)ovirt.org > <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do not > click links or open attachments unless you recognize the sender!!!*** > > > > > > Il giorno ven 9 lug 2021 alle ore 11:00 Marko Vrgotic < > M.Vrgotic(a)activevideo.com> ha scritto: > > Hi Sandro and the rest of oVirt gurus, > > > > My managers are positive regarding helping provide some ARM hardware, but > it would not happened earlier than three months from now, as we are in > process of establishing certain relationship with ARM HW vendor. > > > > T news! > > > > > > In the meantime, I was asked to check if in current 4.4 version or coming > 4.5, are/will there any capabilities or options of emulating aarch64 on > x86_64 platform and if so, what would be the steps to test/enable it. > > > > +Arik Hadas <ahadas(a)redhat.com> , +Milan Zamazal <mzamazal(a)redhat.com> ? > > > > > > Kindly awaiting your reply. > > > > Marko Vrgotic > > > > *From: *Marko Vrgotic <M.Vrgotic(a)activevideo.com> > *Date: *Monday, 28 June 2021 at 15:38 > *To: *Sandro Bonazzola <sbonazzo(a)redhat.com>, Evgheni Dereveanchin < > ederevea(a)redhat.com> > *Cc: *Zhenyu Zheng <zhengzhenyulixi(a)gmail.com>, Joey Ma < > majunjiev(a)gmail.com>, users(a)ovirt.org <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt and ARM > > Hi Sandro, > > > > I will check with my managers if we have and could spare some hardware to > contribute developing for oVirt. > > > > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > > > *From: *Sandro Bonazzola <sbonazzo(a)redhat.com> > *Date: *Friday, 25 June 2021 at 15:26 > *To: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Evgheni Dereveanchin < > ederevea(a)redhat.com> > *Cc: *Zhenyu Zheng <zhengzhenyulixi(a)gmail.com>, Joey Ma < > majunjiev(a)gmail.com>, users(a)ovirt.org <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do not > click links or open attachments unless you recognize the sender!!!*** > > > > > > Il giorno ven 25 giu 2021 alle ore 14:20 Marko Vrgotic < > M.Vrgotic(a)activevideo.com> ha scritto: > > Hi Sandro, > > > > Thank you for the update. I am not equipped to help on development side, > but I can most certainly do test deployments, once there is something > available. > > > > We are big oVirt shop and moving to ARM64 with new product, it would be > great if oVirt would start supporting it. > > > > If we are able to help somehow, let me know. > > > > I guess a start could be adding some arm64 machine to oVirt infrastructure > so developers can build for it. > > You can have a look at > https://ovirt.org/community/get-involved/donate-hardware.html > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.org…> > > > Looping in +Evgheni Dereveanchin <ederevea(a)redhat.com> in case you can > share some resources. > > > > > > > > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > > > *From: *Sandro Bonazzola <sbonazzo(a)redhat.com> > *Date: *Thursday, 24 June 2021 at 18:21 > *To: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Zhenyu Zheng < > zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com> > *Cc: *users(a)ovirt.org <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do not > click links or open attachments unless you recognize the sender!!!*** > > > > > > Il giorno gio 24 giu 2021 alle ore 16:34 Marko Vrgotic < > M.Vrgotic(a)activevideo.com> ha scritto: > > Hi oVirt, > > > > Where can I find if there are any information about oVirt supporting arm64 > CPU architecture? > > > > Right now oVirt is not supporting arm64. There was an initiative about > supporting it started some time ago from openEuler ovirt SIG. > > I didn't got any further updates on this topic, looping in those who I > remember being looking into it. > > I think that if someone contributes arm64 support it would also be a > feature worth a 4.5 release :-) > > > > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQ3XND2NKIL7V… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> > > > > > -- > > *Sandro Bonazzola* > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com > > *Error! Filename not specified.* > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours.* > > > > > > > -- > > *Sandro Bonazzola* > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com > > *Error! Filename not specified.* > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours.* > > > > > > > -- > > *Sandro Bonazzola* > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > sbonazzo(a)redhat.com > > > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours. > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmojo.redh…>* > > >

1 0

How to remove "VM is being cloned" flag in a failed clone VM operation
by Richard Chan 13 Jul '21

13 Jul '21

Hello list, I had an unsuccessful zombie clone VM task - 1. Target: was able to unlock the disks and delete the target VM 2. Source: able to unlock the disks. Now I cannot do anything with the source as it is flagged as "VM is being clone". Is there a way to remove this flag manually? vdms-client Host -> this does not show any tasks outstanding. Thank you. Richard Chan

2 2