- Users - oVirt List Archives

oVirt 4.4.6 Gluster heal pending
by dlotarev＠yahoo.com 25 Jun '21

25 Jun '21

Hi there! I want to know what can i do with this trouble [root@ovirt-h2-new ~]# gluster volume heal data info Brick ovirt-h1-new.local:/gluster/ovirt_new/data / Status: Connected Number of entries: 1 Brick ovirt-h2-new.local:/gluster/ovirt_new/data / Status: Connected Number of entries: 1 [root@ovirt-h2-new ~]# [root@ovirt-h2-new ~]# [root@ovirt-h2-new ~]# [root@ovirt-h2-new ~]# gluster volume heal data info summary Brick ovirt-h1-new.local:/gluster/ovirt_new/data Status: Connected Total Number of entries: 2 Number of entries in heal pending: 2 Number of entries in split-brain: 0 Number of entries possibly healing: 0 Brick ovirt-h2-new.local:/gluster/ovirt_new/data Status: Connected Total Number of entries: 2 Number of entries in heal pending: 2 Number of entries in split-brain: 0 Number of entries possibly healing: 0 Entries not decreasing... Any help

2 1

Re: oVirt 4.2 how to upgrade
by Strahil Nikolov 24 Jun '21

24 Jun '21

Theoretically you most probably can, but you take the risk of being vulnerable to split-brain. Keep in mind that you can:- update gluster to the same version that is used on oVirt 4.4- update oVirt to 4.3.10 as this is the most tested migration scenario- reduce the volume and remove that 3rd node (don't forget to peer detach)- reinstall with EL8 and install gluster (same version) again. Add the brick and qait for the heal- create a new volume for the new HE- Stop the old HE and deploy the new one from the backup- Add the hosts to the new HE and migrate some of the VMs to free one of the old hosts- Reinstall the remaining hosts (one by one) to EL8 Best Regards,Strahil Nikolov On Thu, Jun 24, 2021 at 14:28, Fedele Stabile<fedele.stabile(a)fis.unical.it> wrote: I have a 3 node oVirt 4.2.1 cluster, i'm using a self-hosted engine architecture and storage-engine is on a glusterfs replica 3 of the cluster. The oldest CPU is SandyBridge family (E5-2609) and incidentally it has connectivity problems with IPMI NIC, but Hosted Engine HA is enabled and working. May I reduce the glusterfs replica to 2 and use one of the 3 nodes to begin the installation of ovirt 4.4 on that node? Fedele _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6JWMAUPJQ5GLN…

1 1

[ANN] oVirt 4.4.7 Fifth Release Candidate is now available for testing
by Lev Veyde 24 Jun '21

24 Jun '21

oVirt 4.4.7 Fifth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.7 Fifth Release Candidate for testing, as of June 24th, 2021. This update is the seventh in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA or later should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.7 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.7 (redeploy in case of already being on 4.4.7). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.4 or similar will need the upcoming next batch update, providing an updated sanlock package. * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.7 release highlights: http://www.ovirt.org/release/4.4.7/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.7/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt and ARM
by Marko Vrgotic 24 Jun '21

24 Jun '21

Hi oVirt, Where can I find if there are any information about oVirt supporting arm64 CPU architecture? ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

1 0

Expected behavior when link of required VM networks down
by Gianluca Cecchi 24 Jun '21

24 Jun '21

Hello, suppose I have a cluster with required VM logical network setup. Suppose on hosts I have configured a bonding device with this logical network mapped on it. Suppose an active host for any reason loses the physical connectivity on this bond (both links down or problems with new network config impacting the bond, ecc) So from the VMs point of view, those having a vnic on this logical network will lose the connectivity, but I think they will not detect link down, correct? Is there any expected default action oVirt will take in respect of this scenario or not? Of course I expect to see events with messages about link down. But any automatic action such as live migration of impacted VMs for example? Any configurable one at oVirt level? Thanks, Gianluca

1 0

oVirt 4.2 how to upgrade
by Fedele Stabile 24 Jun '21

24 Jun '21

I have a 3 node oVirt 4.2.1 cluster, i'm using a self-hosted engine architecture and storage-engine is on a glusterfs replica 3 of the cluster. The oldest CPU is SandyBridge family (E5-2609) and incidentally it has connectivity problems with IPMI NIC, but Hosted Engine HA is enabled and working. May I reduce the glusterfs replica to 2 and use one of the 3 nodes to begin the installation of ovirt 4.4 on that node? Fedele

1 0

global ha maintenance status via rest api
by Markus Schaufler 24 Jun '21

24 Jun '21

Hello, I'd like to check the status of "global ha maintenance" via rest api. Can't find any hint on this in the api docs - only for enable/disable... any ideas? thanks!

1 0

[ANN] oVirt 4.4.7 Fourth Release Candidate is now available for testing
by Lev Veyde 24 Jun '21

24 Jun '21

oVirt 4.4.7 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.7 Fourth Release Candidate for testing, as of June 18th, 2021. This update is the seventh in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA or later should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.7 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.7 (redeploy in case of already being on 4.4.7). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.7 release highlights: http://www.ovirt.org/release/4.4.7/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.7/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 4

ovirt4.4 vm with windows 2008r2 bsod19
by grig.4n＠gmail.com 24 Jun '21

24 Jun '21

after migrate from ovirt4.1 to ovirt4.4 virtual mashines with windows 2008r2 bsod 0x00000019.

1 1

oVirt 4.4.5 - Windows Server 2003 VM Reboot problems
by simon＠justconnect.ie 24 Jun '21

24 Jun '21

Hi All, I've had to migrate a Windows Server 2003 R2 VM from VMWare to oVirt which I have successfully managed to get running. The problem I have is if I try to reboot from the OS I receive the following message after the VM shuts down but doesn't reboot: "Exit message: Lost connection with qemu process." Also any attempt to either shutdown or reboot from oVirt Manager has no effect. I realize that this OS is not supported in the current oVirt version, but is there something I am missing to get it working 'unsupported' please? Regards Simon...

2 1