- Users - oVirt List Archives

Adding physical RAM to the hosts
by David White 13 Apr '21

13 Apr '21

As readers will already know, I have three oVirt hosts in a hyperconverged cluster. I had a DIMM with too many errors on it, so I scavenged from a spare server that I had in my office precisely for this purpose. I went ahead and replaced all of the RAM, because the DIMMs in my spare were a different speed. While I was at it, I doubled the RAM on this 1 oVirt host. So now, two hosts have 32GB each. And the 3rd host now has 64GB. So total, I should have 128GB of RAM available to the cluster. The engine recognizes that the host now has 64GB of RAM. Screenshot below: [Screenshot from 2021-04-12 19-59-59.png] However, the engine dashboard still shows that only ~93GB of RAM are available to the cluster (screenshot below). [Screenshot from 2021-04-12 19-58-15.png] Should I be worried that the oVirt dashboard hasn't updated to ~128GB (or a bit less, I guess)? Do I need to do anything else? Sent with ProtonMail Secure Email.

2 2

Re: Engine Upgrade to 4.4.5 Version Number Question
by Yedidyah Bar David 13 Apr '21

13 Apr '21

On Tue, Apr 13, 2021 at 7:42 AM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > Fixes the issue by changing OVESETUP_ENGINE_CORE/enable=bool:'False' to OVESETUP_ENGINE_CORE/enable=bool:'True’ > > Still don’t know why it shows false, but now I can confirm after changing that to True, running engine-setup again upgraded my Engien to 4.4.5. > > > > Thanks for your help. Glad that it worked, and thanks for the report! I strongly recommend that you spend some time investigating what/who/why it was changed. This is most likely a mistake someone made at some point. It might be broader than just this file, or it might be some other kind of problem (e.g. a machine crashed in the middle of engine-setup and left files corrupted). If you can't find why/who, and suspect it's a bug, we'd definitely like to get more information. Some things you can check (other than usual site-specific things like who logged in, when you changed stuff there, etc.): - All /var/log/ovirt-engine/setup/* logs, their timestamps, and their contents (e.g. grep them all for "OVESETUP_ENGINE_CORE/enable"). - /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf* - the file itself, and backups (made by engine-setup or otherwise), timestamps etc. - /etc/ovirt-engine/uninstall.d/* - engine-setup (and other related tools) keep there information about all files it created/chagned - mainly used by engine-cleanup Good luck and best regards, -- Didi

1 0

Re: Engine Upgrade to 4.4.5 Version Number Question
by Yedidyah Bar David 13 Apr '21

13 Apr '21

On Sun, Apr 11, 2021 at 10:19 AM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > Only DWH are deployed on another machine. Please provide more details. The setup log you provided shows nothing as configured - all of engine+dwh+grafana are disabled. Best regards, > I don't edit any configuration manually beside the one that used for SSO. Any clue why is this happened? > > Thanks before. > > Regards, > > Nur Imam Febrianto > Sent from Nine > ________________________________ > From: Yedidyah Bar David <didi(a)redhat.com> > Sent: Sunday, April 11, 2021 13:45 > To: Nur Imam Febrianto > Cc: oVirt Users > Subject: Re: [ovirt-users] Engine Upgrade to 4.4.5 Version Number Question > > On Sat, Apr 10, 2021 at 8:08 AM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > > > Here is the setup logs. > > Do you have "everything" (engine, dwh, etc.) on the same machine, or > different stuff set up on different machines? > > Any chance you manually edited > /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf for any > reason? > > I see there: > > 2021-03-18 22:45:25,952+0700 DEBUG otopi.context > context.dumpEnvironment:775 ENV > OVESETUP_ENGINE_CORE/enable=bool:'False' > > This normally happens only if the engine was not configured on this machine. > > Best regards, > > > > > Thanks. > > > > > > > > From: Yedidyah Bar David > > Sent: 07 April 2021 12:36 > > To: Nur Imam Febrianto > > Cc: oVirt Users > > Subject: Re: [ovirt-users] Engine Upgrade to 4.4.5 Version Number Question > > > > > > > > On Tue, Apr 6, 2021 at 6:49 PM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > > > > > I’m currently trying to upgrade our cluster from 4.4.4 to 4.4.5. All using oVirt Node. > > > > > > All host are successfully upgraded to 4.4.5 (I can see the image layer was changed from 4.4.4 to 4.4.5, cockpit also shows same version), but in Engine VM, already run engine-upgrade-check, upgrading ovirt-setup, running engine-setup successfully, reboot the engine but whenever I open the engine web page, it still showing Version 4.4.4.5-1.el8. Is this version correct ? Because my second Cluster that use their own hosted engine shows different version (4.4.5.11-1.el8). Anybody having a same issues like me ? > > > > Please share the setup log (in /var/log/ovirt-engine/setup). Thanks. > > > > Best regards, > > -- > > Didi > > > > > > > > -- > Didi > -- Didi

2 1

Ovirt with Oracle Linux 8.3 & Cockpit - Direct Luns
by hansontodd＠gmail.com 12 Apr '21

12 Apr '21

Is Ovirt compatible with Oracle Linux 8.3? I have KVM & Cockpit running on Oracle Linux 8.3 but don't see a way to map direct luns (like RDM's) to the VM in the Cockpit interface. Do I need to move back to Centos 7.x or RHEL 7.x with Ovirt to be able to use direct luns? Can Ovirt and Cockpit coexist?

1 0

Cannot edit VM. Maximum SATA devices exceeded
by adm＠m-go.ru 12 Apr '21

12 Apr '21

I tried to delete one of the disks, but I can't do it. https://m-go.ru/stream/item/4780 Disk as SATA

2 2

ipxe support with Q35 chipset and UEFI
by Gianluca Cecchi 12 Apr '21

12 Apr '21

Hello, I'm doing some tests with iPXE (downloaded latest version cloning the git repo some days ago). I'm using oVirt 4.4.5 with VMs configured with different chipset/firmware type. It seems that using dhcpd.conf directive of type if exists user-class and option user-class = "iPXE" { filename "http://my_http_server/..."; } else { ... } the VM boot catches it when I use Q35 Chipset with BIOS, while it goes inside the "else" section if using Q35 Chipset with UEFI (not the SecureBoot one) Does this mean that the Q35 UEFI doesn't support iPXE? BTW: if anyone has suggestions about an utility that can let me boot via network and give the user a general menu from which he/she can go and choose standard pxe with bios or uefi boot, to be able to install both Linux based systems and other ones, such as ESXi hosts, both with BIOS and UEFI, it is welcome Gianluca

1 0

where I can find 4.4.5 Data warehouse repo
by dhanaraj.ramesh＠yahoo.com 12 Apr '21

12 Apr '21

below repo is not working in CentOS 7 OS, is there any repo available for centos? yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm

2 2

Re: Engine Upgrade to 4.4.5 Version Number Question
by Yedidyah Bar David 11 Apr '21

11 Apr '21

On Sat, Apr 10, 2021 at 8:08 AM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > Here is the setup logs. Do you have "everything" (engine, dwh, etc.) on the same machine, or different stuff set up on different machines? Any chance you manually edited /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf for any reason? I see there: 2021-03-18 22:45:25,952+0700 DEBUG otopi.context context.dumpEnvironment:775 ENV OVESETUP_ENGINE_CORE/enable=bool:'False' This normally happens only if the engine was not configured on this machine. Best regards, > > Thanks. > > > > From: Yedidyah Bar David > Sent: 07 April 2021 12:36 > To: Nur Imam Febrianto > Cc: oVirt Users > Subject: Re: [ovirt-users] Engine Upgrade to 4.4.5 Version Number Question > > > > On Tue, Apr 6, 2021 at 6:49 PM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > > > I’m currently trying to upgrade our cluster from 4.4.4 to 4.4.5. All using oVirt Node. > > > > All host are successfully upgraded to 4.4.5 (I can see the image layer was changed from 4.4.4 to 4.4.5, cockpit also shows same version), but in Engine VM, already run engine-upgrade-check, upgrading ovirt-setup, running engine-setup successfully, reboot the engine but whenever I open the engine web page, it still showing Version 4.4.4.5-1.el8. Is this version correct ? Because my second Cluster that use their own hosted engine shows different version (4.4.5.11-1.el8). Anybody having a same issues like me ? > > Please share the setup log (in /var/log/ovirt-engine/setup). Thanks. > > Best regards, > -- > Didi > > -- Didi

2 1

Re: Engine Upgrade to 4.4.5 Version Number Question
by Yedidyah Bar David 10 Apr '21

10 Apr '21

On Tue, Apr 6, 2021 at 6:49 PM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > > I’m currently trying to upgrade our cluster from 4.4.4 to 4.4.5. All using oVirt Node. > > All host are successfully upgraded to 4.4.5 (I can see the image layer was changed from 4.4.4 to 4.4.5, cockpit also shows same version), but in Engine VM, already run engine-upgrade-check, upgrading ovirt-setup, running engine-setup successfully, reboot the engine but whenever I open the engine web page, it still showing Version 4.4.4.5-1.el8. Is this version correct ? Because my second Cluster that use their own hosted engine shows different version (4.4.5.11-1.el8). Anybody having a same issues like me ? Please share the setup log (in /var/log/ovirt-engine/setup). Thanks. Best regards, -- Didi

2 1

How to detach FC Storage Domain
by Miguel Garcia 09 Apr '21

09 Apr '21

I have added some FC storage domains into incorrect Data Center, I'm trying to detach them by moving to Storage -> Storage domain select storage domain -> Data Center tab and click on detach button then got the following error: Failing detaching storage domain from Data Center In log files so far found next lines: 2021-03-25 22:58:41,621-04 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.DetachStorageDomainVDSCommand] (EE-ManagedThreadFactory-engine-Thread-2636) [0a08dff7-13c4-49c2-b451-0dea136941ec] START, DetachStorageDomainVDSCommand( DetachStorageDomainVDSCommandParameters:{storagePoolId='68b8d8e9-af51-457d-9b9d-36e37ad60d55', ignoreFailoverLimit='false', storageDomainId='a1f6a779-a65f-427c-b034-174e1150361d', masterDomainId='00000000-0000-0000-0000-000000000000', masterVersion='1', force='false'}), log id: 42974429 2021-03-25 22:58:42,941-04 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.DetachStorageDomainVDSCommand] (EE-ManagedThreadFactory-engine-Thread-2636) [0a08dff7-13c4-49c2-b451-0dea136941ec] Failed in 'DetachStorageDomainVDS' method 2021-03-25 22:58:42,944-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2636) [0a08dff7-13c4-49c2-b451-0dea136941ec] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), VDSM command DetachStorageDomainVDS failed: Storage domain does not exist: (u'a1f6a779-a65f-427c-b034-174e1150361d',) 2021-03-25 22:58:42,945-04 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.DetachStorageDomainVDSCommand] (EE-ManagedThreadFactory-engine-Thread-2636) [0a08dff7-13c4-49c2-b451-0dea136941ec] Command 'DetachStorageDomainVDSCommand( DetachStorageDomainVDSCommandParameters:{storagePoolId='68b8d8e9-af51-457d-9b9d-36e37ad60d55', ignoreFailoverLimit='false', storageDomainId='a1f6a779-a65f-427c-b034-174e1150361d', masterDomainId='00000000-0000-0000-0000-000000000000', masterVersion='1', force='false'})' execution failed: IRSGenericException: IRSErrorException: Failed to DetachStorageDomainVDS, error = Storage domain does not exist: (u'a1f6a779-a65f-427c-b034-174e1150361d',), code = 358 Seems that the storage domain does not exists. Is there a way to force detach action? Thanks in advance

3 4