- Users - oVirt List Archives

Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.
by James Loker-Steele 28 Jul '20

28 Jul '20

Hi Anton, I tried without the /24 it threw an error saying it wasn’t a correct cidr address 10.93.130.50/64 (it added the /64) Interesting though, I have manually created the ovirtmgmt bridge interface and assigned an IP address to it (as per another post) and it has gone past this step now without the /24. The part I am crashing out on is being unable to resolve the address. I can post the error shortly. This is strange behaviour as the host can resolve, but I will be adding dns addresses to the ovirtmgmt interface and trying again(post didn’t show to add them) When I installed <4.2 I didn’t get these issues it went smoothly. The problems seem related to ansible. Best regards James Sent from my iPhone > On 28 Jul 2020, at 07:25, Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > > Hi James, > > You can remove the “/24” prefix after the IP address for the management VM. You will get prompts to add the netmask and gateway after you add the IP address. > > > Anton Louw > Cloud Engineer: Storage and Virtualization at Vox > T: 087 805 0000 | D: 087 805 1572 > M: N/A > E: anton.louw(a)voxtelecom.co.za > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > > > > > > > > > > > > > Disclaimer > > The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here. > > > > From: James Loker-Steele via Users <users(a)ovirt.org> > Sent: 27 July 2020 11:36 > To: users(a)ovirt.org > Subject: [ovirt-users] Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details. > > Hi All, > Trying to install a self-hosted engine but cannot get past this step. > > [root@<hostname hidden> /]# hosted-engine --deploy > [ INFO ] Stage: Initializing > [ INFO ] Stage: Environment setup > During customization use CTRL-D to abort. > Continuing will configure this host for serving as hypervisor and will create a local VM with a running engine. > The locally running engine will be used to configure a new storage domain and create a VM there. > At the end the disk of the local VM will be moved to the shared storage. > Are you sure you want to continue? (Yes, No)[Yes]: > Configuration files: [] > Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log > Version: otopi-1.8.3 (otopi-1.8.3-1.el7) > [ INFO ] Stage: Environment packages setup > [ INFO ] Stage: Programs detection > [ INFO ] Stage: Environment setup (late) > [ INFO ] Stage: Environment customization > > --== STORAGE CONFIGURATION ==-- > > > --== HOST NETWORK CONFIGURATION ==-- > > Please indicate the gateway IP address [10.x.x.x]: > [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] > [ INFO ] skipping: [localhost] > Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, bond0.60, em1) [em1]: bond0.130 > Please specify which way the network connectivityshould be checked (ping, dns, tcp, none) [dns]: > > --== VM CONFIGURATION ==-- > > Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: > Please enter the name of the cluster where you want to deploy this hosted-engine host. [Default]: > If you want to deploy with a custom engine appliance image, > please specify the path to the OVA archive you would like to use > (leave it empty to skip, the setup will use ovirt-engine-appliance rpm installing it if missing): /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova > [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) > [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) > Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: > Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [4]: 16384 > [ INFO ] Detecting host timezone. > Please provide the FQDN you would like to use for the engine. > Note: This will be the FQDN of the engine VM you are now going to launch, > it should not point to the base host or to any other existing machine. > Engine VM FQDN: []: <fqdn hidden> > Please provide the domain name you would like to use for the engine appliance. > Engine VM domain: [<tld hidden>] > Enter root password that will be used for the engine appliance: > Confirm appliance root password: > Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): > [WARNING] Skipping appliance root ssh public key > Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: > Do you want to apply a default OpenSCAP security profile (Yes, No) [No]: > You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:3a:4b:fc]: > > How should the engine VM network be configured (DHCP, Static)[DHCP]? static > Please enter the IP address to be used for the engine VM []: 10.93.130.50/24 > [ ERROR ] Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details. > [ INFO ] Stage: Clean up > [ INFO ] Cleaning temporary resources > [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] > [ INFO ] ok: [localhost -> localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] > [ INFO ] ok: [localhost] > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20200724165204.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed > Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log > > > Nothing in log is of much help. > > Also tried to install via Cockpit but gets to prepareVM and displays settings, click next and deployment failed. > No log. > I have tried specifying the OVA and not specifying. > > Anyone can help? > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/E676EUG7Y3TQF…

1 1

Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.
by James Loker-Steele 28 Jul '20

28 Jul '20

Hi All, Trying to install a self-hosted engine but cannot get past this step. [root@<hostname hidden> /]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and will create a local VM with a running engine. The locally running engine will be used to configure a new storage domain and create a VM there. At the end the disk of the local VM will be moved to the shared storage. Are you sure you want to continue? (Yes, No)[Yes]: Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log Version: otopi-1.8.3 (otopi-1.8.3-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup (late) [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- --== HOST NETWORK CONFIGURATION ==-- Please indicate the gateway IP address [10.x.x.x]: [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, bond0.60, em1) [em1]: bond0.130 Please specify which way the network connectivityshould be checked (ping, dns, tcp, none) [dns]: --== VM CONFIGURATION ==-- Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: Please enter the name of the cluster where you want to deploy this hosted-engine host. [Default]: If you want to deploy with a custom engine appliance image, please specify the path to the OVA archive you would like to use (leave it empty to skip, the setup will use ovirt-engine-appliance rpm installing it if missing): /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [4]: 16384 [ INFO ] Detecting host timezone. Please provide the FQDN you would like to use for the engine. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: []: <fqdn hidden> Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [<tld hidden>] Enter root password that will be used for the engine appliance: Confirm appliance root password: Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: Do you want to apply a default OpenSCAP security profile (Yes, No) [No]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:3a:4b:fc]: How should the engine VM network be configured (DHCP, Static)[DHCP]? static Please enter the IP address to be used for the engine VM []: 10.93.130.50/24 [ ERROR ] Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details. [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20200724165204.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log Nothing in log is of much help. Also tried to install via Cockpit but gets to prepareVM and displays settings, click next and deployment failed. No log. I have tried specifying the OVA and not specifying. Anyone can help?

2 1

Adding hypervisor fails, yum links deprecated (Centos 7.7/ oVirt 4.3)
by wjb2130＠cumc.columbia.edu 28 Jul '20

28 Jul '20

Greetings. In a multi-hypervisor environment, we are running Centos 7.7.1908, with ovirt-4.3. There are problems adding a new hypervisor, because all the yum resources have switched in favor of newer versions. Is there a proceedure to add a hypervisor under the oVirt Virtualization manager while retaining an older, known working OS version like Centos 7.7.1908 ? Upgrading everything across the board isn't an immediate option. There are many VMs and hypervisors in production, and can't be disturbed. In sum: is it still possible to install known working 4.30.33-1.el7? All that is presented now is 4.30.46-1.el7 I ran: yum install vdsm-4.30.33-1.el7.x86_64. This completed. However, when I tried to add the resulting hypservisor using the oVirt web UI, that fails. Logs on that management server showed that the install process insists on using 4.30.46-1.el7. Any way to avoid this? 2020-07-22 20:30:58,621-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [45782a5f] EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during installation of Host hypervisor7: Failed to execute stage 'Package installation': [u'vdsm-4.30.46-1.el7.x86_64 requires lvm2 >= 7:2.02.186-7.el7_8.1'].

2 1

change lun for hosted_engine use?
by Philip Brown 28 Jul '20

28 Jul '20

I currently have a self-hosted engine, running in a dedicated ISCSI storage domain. I'd like to change the backend hardware for the storage. i think there's some longwinded and complicated method of shutting down the engine, backup, creating a NEW one, restore, and whoknowswhat. I was wondering though, if maybe there's a way to just add an iscsi lun to the storage domain, and tell ovirt, "Hey, move the stuff over to that other lun" ? Ive added the new lun already :) havent found a reference to move the files' residence though. If it helps, my end goal is to remove that lun completely. -- Philip Brown| Sr. Linux System Administrator | Medata, Inc. 5 Peters Canyon Rd Suite 250 Irvine CA 92606 Office 714.918.1310| Fax 714.918.1325 pbrown(a)medata.com| www.medata.com

2 3

Deploying new Ovirt Node on new 4.4 cluster. ansible code incorrect
by erin.sims＠bookit.com 27 Jul '20

27 Jul '20

Hi Guys we attempted to deploy a new ovirt cluster two weeks ago. 4.4.1 and 4.4.0 Once we got the engine up we tried to add a new node and Ansible began to fail on the deploy scripts. I search the logs and discovered the Ansible script was not evaluating the right versions of python, python3. Also the yum module should of been dnf. Once i change those in many places it worked great. I am just trying to figure out what went wrong with our deploy so this doesn't happen again. we are using a hosted engine on a centos 8 vm. please let me know what logs i can grab or apps to run for more details. details: engine: [root@ovirt ~]# uname -a Linux ovirt.ism.ld 4.18.0-193.6.3.el8_2.x86_64 #1 SMP Wed Jun 10 11:09:32 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@ovirt ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@ovirt ~]# uname -a Linux ovirt.ism.ld 4.18.0-193.6.3.el8_2.x86_64 #1 SMP Wed Jun 10 11:09:32 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@ovirt ~]# cat /etc/os-release NAME="CentOS Linux" VERSION="8 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" PLATFORM_ID="platform:el8" PRETTY_NAME="CentOS Linux 8 (Core)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://www.centos.org/" BUG_REPORT_URL="https://bugs.centos.org/" node2: CENTOS_MANTISBT_PROJECT="CentOS-8" CENTOS_MANTISBT_PROJECT_VERSION="8" REDHAT_SUPPORT_PRODUCT="centos" REDHAT_SUPPORT_PRODUCT_VERSION="8" [root@web2 ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@web2 ~]# cat /etc/os-release NAME="CentOS Linux" VERSION="8 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" VARIANT="oVirt Node 4.4.1.1" VARIANT_ID="ovirt-node" PRETTY_NAME="oVirt Node 4.4.1.1" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://www.ovirt.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" PLATFORM_ID="platform:el8" [root@web2 ~]# uname -a Linux web2.ism.ld 4.18.0-193.6.3.el8_2.x86_64 #1 SMP Wed Jun 10 11:09:32 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@web2 ~]# cat /etc/os-release NAME="CentOS Linux" VERSION="8 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" VARIANT="oVirt Node 4.4.1.1" VARIANT_ID="ovirt-node" PRETTY_NAME="oVirt Node 4.4.1.1" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://www.ovirt.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" PLATFORM_ID="platform:el8" [root@web2 ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) node1: [root@web1 ~]# uname -a Linux web1.ism.ld 4.18.0-147.8.1.el8_1.x86_64 #1 SMP Thu Apr 9 13:49:54 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@web1 ~]# dnf update CentOS-8 - Gluster 7 0.0 B/s | 0 B 00:00 Failed to download metadata for repo 'ovirt-4.4-centos-gluster7' Error: Failed to download metadata for repo 'ovirt-4.4-centos-gluster7' [root@web1 ~]# cat /etc/centos-release CentOS Linux release 8.1.1911 (Core) [root@web1 ~]# cat /etc/os-release NAME="CentOS Linux" VERSION="8 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" VARIANT="oVirt Node 4.4.0" VARIANT_ID="ovirt-node" PRETTY_NAME="oVirt Node 4.4.0" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://www.ovirt.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" PLATFORM_ID="platform:el8"

2 2

Centos based Ovirt 4.3.10.4-1.el7, VMs cannot communicate over VM networks
by Konstantinos B 27 Jul '20

27 Jul '20

Hi all Can anyone point into the right direction on how to troubleshoot VM connectivity between VM networks? The nodes have been double-installed from the engine. The external ovn-provider is reachable through HTTP. ovs-vsctl shows the interfaces once a VM is booted. However, no traffic is passed between VMs. Any help is greatly appreciated.

2 1

problem with custom bond options
by Jiří Sléžka 27 Jul '20

27 Jul '20

Hello, CentOS8, oVirt 4.4.1.10-1.el8 I am trying to setup active-backup (mode=1) bonding mode with custom properties. I have one 10GE switch, the second is just 1G. 10GE link is the primary one. cat /etc/sysconfig/network-scripts/ifcfg-bond0 BONDING_OPTS="active_slave=ens5 downdelay=0 miimon=100 mode=active-backup primary=ens5 updelay=0" TYPE=Bond BONDING_MASTER=yes PROXY_METHOD=none BROWSER_ONLY=no IPV4_FAILURE_FATAL=no IPV6_DISABLED=yes IPV6INIT=no NAME=bond0 UUID=c054364e-47cf-47ee-a7fc-70b37c9977e7 DEVICE=bond0 ONBOOT=yes MTU=9000 When I try to add a custom parameter "fail_over_mac=active" (which I believe could solve my problems with stalled mac addresses in switch's cam table in case of failover) I got... "Error while executing action HostSetupNetworks: Unexpected exception" ...in manager. In the engine.log it looks like 2020-07-22 21:20:35,774+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-8) [da1984f3-f38b-4e0a-ac80-a81e67d73ff0] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': 'MAC address cannot be specified in bond interface along with specified bond options'}] 2020-07-22 21:20:35,774+02 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-8) [da1984f3-f38b-4e0a-ac80-a81e67d73ff0] Failed in 'HostSetupNetworksVDS' method 2020-07-22 21:20:35,774+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-8) [da1984f3-f38b-4e0a-ac80-a81e67d73ff0] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': 'MAC address cannot be specified in bond interface along with specified bond options'}] 2020-07-22 21:20:35,811+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-8) [da1984f3-f38b-4e0a-ac80-a81e67d73ff0] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ovirt-hci01.mch.local command HostSetupNetworksVDS failed: Internal JSON-RPC error: {'reason': 'MAC address cannot be specified in bond interface along with specified bond options'} Could anybody explain me what 'MAC address cannot be specified in bond interface along with specified bond options' means? I believe a MAC address is not configured in interface configuration. Or does it mean 'fail_over_mac=active' is not supported in oVirt? Thanks in advance, Jiri

3 12

Re: Ovirt SYSTEM user does not allow deletion of VM networks
by Konstantinos B 25 Jul '20

25 Jul '20

I've deleted them from the cluster as well but re-appear. I've removed ovirt-engine through engine-cleanup installed again and they reappear. Removed ovirt-engine deleted all "ovirt*" files and currenty trying to re-install. I've checked the host's ovs-vsctl bridges and only the desired are shown. So i believe it's an issue on the engine itself.

3 3

Shutdown procedure for single host HCI Gluster
by Gianluca Cecchi 25 Jul '20

25 Jul '20

Hello, I'm testing the single node HCI with ovirt-node-ng 4.3.9 iso. Very nice and many improvements over the last time I tried it. Good! I have a doubt related to shutdown procedure of the server. Here below my steps: - Shutdown all VMs (except engine) - Put into maintenance data and vmstore domains - Enable Global HA Maintenance - Shutdown engine - Shutdown hypervisor It seems that the last step doesn't end and I had to brutally power off the hypervisor. Here the screenshot regarding infinite failure in unmounting /gluster_bricks/engine https://drive.google.com/file/d/1ee0HG21XmYVA0t7LYo5hcFx1iLxZdZ-E/view?usp=… What would be the right step to do before the final shutdown of hypervisor? Thanks, Gianluca

3 10

RDP
by eevans＠digitaldatatechs.com 24 Jul '20

24 Jul '20

I am using Ovirt 4.3. I followed the instructions for get RDP to work for a user, but admin@internal is the only user the RDP will launch for. The other test users I created and are added to the Remote Desktop Users group which is the permission I assigned to the VM's as well as the user name. I added users first, then the group to see if it would help. So far, admin@internal, the Ovirt admin user, is the only user RDP will work for. I know I am missing something, I'm just not sure what. Any help would be appreciated. Eric.

3 4