- Users - oVirt List Archives

main channel: failed to connect HTTP proxy connection not allowed
by Jorick Astrego 21 Feb '20

21 Feb '20

Hi, Having a spice console issue on our new 4.3.8 cluster. The console stays blank and with the cli and debug on, I get the following error "main channel: failed to connect HTTP proxy connection not allowed" We have a userportal through haproxy so this is configured in ovirt engine engine-config -g SpiceProxyDefault SpiceProxyDefault: http://userportal.*.*:****/ version: general But the same setting works fine on our 4.2 cluster. I can telnet to the ports on the 4.3.8 hosts without issue. Non working console on newer cluster: remote-viewer -v --debug console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.697: Opening display to console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.700: Guest (null) has a spice display Guest (null) has a spice display (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.789: Spice foreign menu updated (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: After open connection callback fd=-1 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: Opening connection to display at console.vv Opening connection to display at console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: fullscreen display 0: 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: app is not in full screen (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.792: New spice channel 0x55704bf70d40 SpiceMainChannel 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.793: notebook show status 0x55704b820280 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: main channel: failed to connect HTTP proxy connection not allowed (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: Destroy SPICE channel SpiceMainChannel 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: zap main channel (remote-viewer:29267): virt-viewer-WARNING **: 16:24:24.969: Channel error: HTTP proxy connection not allowed Working console on older cluster: remote-viewer -v --debug console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Opening display to console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Guest (null) has a spice display Guest (null) has a spice display (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Spice foreign menu updated (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: After open connection callback fd=-1 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Opening connection to display at console.vv Opening connection to display at console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: fullscreen display 0: 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: New spice channel 0x556a03f7e820 SpiceMainChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: notebook show status 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: main channel: opened (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: notebook show status 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: virt_viewer_app_set_uuid_string: UUID changed to a2d64ffe-7583-45b6-92f3-87661039388c (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.502: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice channel 0x556a043bb660 SpiceDisplayChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice channel 0x556a0422b570 SpiceCursorChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: New spice channel 0x556a0422c000 SpiceInputsChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: new inputs channel (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: creating spice display (#:0) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: Insert display 0 0x556a03ca29e0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating spice display (#:1) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: Insert display 1 0x556a03ca2830 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating spice display (#:2) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: Insert display 2 0x556a03ca2680 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: creating spice display (#:3) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: Insert display 3 0x556a03ca24d0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.701: Found a window without a display, reusing for display #0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.701: notebook show display 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Child allocate 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Child allocate 1024x768 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

1 1

[ANN] oVirt 4.3.9 Second Release Candidate is now available for testing
by Lev Veyde 21 Feb '20

21 Feb '20

The oVirt Project is pleased to announce the availability of the oVirt 4.3.9 Second Release Candidate for testing, as of February 20th, 2020. This update is a release candidate of the ninth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.9 release highlights: http://www.ovirt.org/release/4.3.9/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.9/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 2

Understanding dashboard memory data
by nux＠li.nux.ro 21 Feb '20

21 Feb '20

Hello, I'm having to deal with an oVirt installation, once I log in the dashboard says: Memory: "1.2 Available of 4.5 TiB" and "Virtual resources - Committed: 113%, Allocated: 114%". So, clearly there is RAM available, but what's with the committed and allocated numbers? Regards

1 0

Ovirt storage domain ovirt-image-repository is unattached and can't use change CD to install windows on VM
by Heinrich Momberg 20 Feb '20

20 Feb '20

Good day, Whenever i am trying to use the change CD to mount the ovirt tools iso so i can install windows server or any windows it says "could not find ISO file collection".It doesn't pick up the hdd that i have created in the windwos setup so i have to do the whole ovirt tools mount and select the windows i want to insteall etc. It has been working fine until a couple of days ago when we had power outages. I also noticed that the storage domain,ovirt-image-repository is unattached... How do i go about fixing this problem or where can i check logs. I have checked the permissions where the ISO's or images are stored.

3 9

Spacewalk Integration
by eevans＠digitaldatatechs.com 20 Feb '20

20 Feb '20

I finally figured out how to use Spacewalk as an external provider in Ovirt. For the URL I used http://sat.digitaldatatechs.com/XMLRPC and used the admin login credentials. It registered and Spacewalk has the capability of provisioning a bare bones machine. I have not tested provisioning but I will comment once I do.

1 0

Get CPU Family
by Luca 20 Feb '20

20 Feb '20

Hello guys, how can I get the correct CPU Family in a ovirt host? When I execute virsh -r capabilities I get only "Broadwell-noTSX-IBRS" and not the full "Broadwell-noTSX IBRS SSBD MDS" Regards, Luca

3 2

Re: Add LDAP user : ERROR: null value in column "external_id" violates not-null constraint
by Lucas Lamy 20 Feb '20

20 Feb '20

Anybody ?

2 1

Unsynced entries do not self-heal during upgrade from oVirt 4.2 -> 4.3
by Goorkate, B.J. 20 Feb '20

20 Feb '20

Hi all, I'm in the process of upgrading oVirt-nodes from 4.2 to 4.3. After upgrading the first of 3 oVirt/gluster nodes, there are between 600-1200 unsynced entries for a week now on 1 upgraded node and one not-yet-upgraded node. The third node (also not-yet-upgraded) says it's OK (no unsynced entries). The cluster doesn't seem to be very busy, but somehow self-heal doesn't complete. Is this because of different gluster versions across the nodes and will it resolve as soon as I upgraded all nodes? Since it's our production cluster, I don't want to take any risk... Does anybody recognise this problem? Of course I can provide more information if necessary. Any hints on troubleshooting the unsynced entries are more than welcome! Thanks in advance! Regards, Bertjan ------------------------------------------------------------------------------ De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. Het Universitair Medisch Centrum Utrecht is een publiekrechtelijke rechtspersoon in de zin van de W.H.W. (Wet Hoger Onderwijs en Wetenschappelijk Onderzoek) en staat geregistreerd bij de Kamer van Koophandel voor Midden-Nederland onder nr. 30244197. Denk s.v.p aan het milieu voor u deze e-mail afdrukt. ------------------------------------------------------------------------------ This message may contain confidential information and is intended exclusively for the addressee. If you receive this message unintentionally, please do not use the contents but notify the sender immediately by return e-mail. University Medical Center Utrecht is a legal person by public law and is registered at the Chamber of Commerce for Midden-Nederland under no. 30244197. Please consider the environment before printing this e-mail.

3 12

Re: Engine installation failed at - get local vm ip
by shawly 20 Feb '20

20 Feb '20

Still have this problem, log doesn't say anything but that it failed after 90 tries, no reason in the log. Using VMWare Workstation 14, guest is running oVirt Node 4.3.8.

2 1

Can't install virtio-win with EL7.7/Ovirt-4.3.8 -- rpm error
by Derek Atkins 19 Feb '20

19 Feb '20

Hi, I was trying to install the virtio-win package, but it gives an error: ERROR You need to update rpm to handle: rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by virtio-win-0.1.173-6.noarch Is this a known problem with current 4.3.x and EL7.7? -derek -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

6 7