- Users - oVirt List Archives

HP NetXen Incorporated NX3031 driver
by Leo David 07 Sep '19

07 Sep '19

Hi everyone, I have this bloody card installed on a node, and it seems that no driver can be loaded for it, "ip link sh" does not show it. Any recommendation about installing this network card on oVirt 4.2.8 ? lspci -v .... 05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 31 Memory at d9c00000 (64-bit, non-prefetchable) [size=2M] Memory at da000000 (64-bit, non-prefetchable) [size=32M] Expansion ROM at d8000000 [disabled] [size=64K] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic 05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 33 Memory at d9e00000 (64-bit, non-prefetchable) [size=2M] Memory at dc000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic dmesg | grep netxen [ 2.188078] netxen_nic 0000:05:00.0: 2MB memory map [ 2.188371] netxen_nic 0000:05:00.0: Timeout reached waiting for rom done [ 2.188442] netxen_nic 0000:05:00.0: Error getting board config info. [ 2.189488] netxen_nic: probe of 0000:05:00.0 failed with error -5 [ 2.190438] netxen_nic 0000:05:00.1: 2MB memory map [ 2.190741] netxen_nic 0000:05:00.1: Timeout reached waiting for rom done [ 2.190808] netxen_nic 0000:05:00.1: Error getting board config info. [ 2.190964] netxen_nic: probe of 0000:05:00.1 failed with error -5 ... Thank you very much ! Leo -- Best regards, Leo David

2 1

Windows server std 2019 64 bit support
by Alex K 06 Sep '19

06 Sep '19

Hi all, I am trying to find out if Windows server std 2019 64 bit is supported at ovirt 3.4. I have checked the following links: https://www.ovirt.org/documentation/vmm-guide/chap-Introduction.html https://access.redhat.com/articles/973133 https://www.windowsservercatalog.com/results.aspx?&bCatID=1521&cpID=24121&a… From the above I deduce that RHEV 4.3.5 supports it and ovirt does not include it in the supported list of guest OS. Also KVM on CentOS 7.7 seems to be supporting it as RHEL 7.7 is listed as supported platform. Have you tried to load Windows server std 2019 64 bit successfullyon ovirt 3.4? Thank you.

2 2

ovirt-guest: Network device hanging shortly after startup (after Upgrade to 4.3.5)
by julius.kempa＠astelon.ch 06 Sep '19

06 Sep '19

We have a some old guests (SLES 10.4) which has been worked corectly till 4.2.7 (Manager + Host) After Upgrade to 4.3.5, we have got a network issue, that the gues network device, not depending on used device type, stopts to work after some seconds.... after about 15-20 pings device is hanging. Sometimes, in the first time after the device hungs up, the message "no buffer space available" comes from ping. Does someone knows a solution for it? greetings Julius

3 3

[ANN] oVirt 4.3.6 Fifth Release Candidate is now available for testing
by Sandro Bonazzola 05 Sep '19

05 Sep '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Fifth Release Candidate for testing, as of September 5th, 2019. This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Candidate Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available based on CentOS 7.7 Candidate Release Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.6/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

VM crushed and cant shutdown successfully,I shoud to reboot the ovirt-node machine
by zhouhao＠vip.friendtimes.net 05 Sep '19

05 Sep '19

VM crushed and cant shutdown successfully,It always on the way to shutdown，even if I wait it for 10 hours；Everytimes I shoud to reboot the ovirt-node machine This comes up 4 times, It appes both on the ovirt-noe 4.3 and 4.2; This bug appers when my VM is running at high load（seems memory and disk's w/r） My storage domain is local on host; When the bug appers,it could cost my node's io,looks like the picture below；But sometimes it will not The vm's threading on the ovirt-node, the IO ratio is 100% Everytime the vm's process will change to defunct I can not kill it,I had to shutdown the ovirt-node on the engine website ,the vm's status always in the way to shutdown ,even if I wait for it for hours; It either failed or is shutting down and the "power off" cant shutdown the vm too. the vm's error below The ovirt-node's error below ---------------------------------------------------------------- The other infomation about my ovirt-node node-version： node hardware zhouhao(a)vip.friendtimes.net

1 0

Re: [ANN] oVirt 4.3.6 Fourth Release Candidate is now available for testing
by Strahil 05 Sep '19

05 Sep '19

Hi Sandro, Can the update work with 7.6 ? I'm asking because CentOS 7.7 is still building and unavailable. Best Regards, Strahil NikolovOn Aug 29, 2019 10:47, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Fourth Release Candidate for testing, as of August 29th, 2019. > > This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. > This is pre-release software. This pre-release should not to be used in production. > > This release is available now on x86_64 architecture for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > > This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > * oVirt Node 4.3 (available for x86_64 only) will be made available when CentOS 7.7 will be released. > > See the release notes [1] for known issues, new features and bugs fixed. > > Notes: > - oVirt Appliance is already available > - oVirt Node is not yet available, pending CentOS 7.7 release to be available > > Additional Resources: > * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog:http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4.3.6/ > [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > > sbonazzo(a)redhat.com > > Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.

2 1

Re: Any real experiences with nested virtualisation?
by Strahil 05 Sep '19

05 Sep '19

I guess you want to do something like this one : http://www.chrisj.cloud/?q=node/8 As Ovirt is upstream of RHV , I believe that RDO and Ovirt have almost the same integration as in the post. Still,such setup requires a lot of knowledge about KVM, oVirt and OpenStack. Best Regards, Strahil NikolovOn Sep 4, 2019 21:36, thomas(a)hoberg.net wrote: > > First, it's a scenario the oVirt team seem to actually embrace themselves. > > I believe I have seen that type of deployment mentioned either in one of the forward looking blog posts or Red Hat summit videos. > > And then it simply makes a lot of sense to have those crucial management VMs that control the swarm of resources in a cloud run under a fault-tolerant VM management environment such as oVirt. > > As for nested virtualization, I can only provide some negative experience with oVirt. > > I've done nested virtualization with VMware, running ESX on VMWare Workstation and then some VMs underneath that ESX successfully. > > When I tried to do the same with oVirt, running an oVirt hyperconverged cluster as VMs on VMware workstation, I got reasonably far, but then every VM I tried to launch nested would just stop right at boot. > > It first happened with the hosted-engine, as that tries to start as a VM, but it happened more obviously when I tried to migrate VMs (just a plain Fedora 30 in this case) from a physical compute node running oVirt nodeOS to a virtualized compute node, running the same current oVirt nodeOS image on VMware Workstation (Windows 2016 host, if that matters). > > The machine would start the live-migration properly and then just freeze and stay frozen until I migrated it back or indeed to any other non-virtualized node. > > I haven't as yet tried to do that with nested KVM, which I believe might actually work: But it's on my things to test, so I'll report back, once I get around it. > > Actually I am wondering, a) how deep this nesting would be allowed to go and b) if the 'leaf' nodes at the last nesting level should actually have nesting support activated in their kernel parameters... > > Any insight here would be well appreciated. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6YDBQGIXUWTDB…

1 0

Any real experiences with nested virtualisation?
by tonyppe＠gmail.com 04 Sep '19

04 Sep '19

I have ovirt 4.3.5 and Openstack hosts. There are 2 x openstack compute and 2 x ovirt hosts with hosted manager. I think i can simplify the management of this if I were to virtualise the openstack compute nodes as VMs on ovirt. I wanted to reach out here to gauge any other users experiences with it if at all. From the research I have done it looks like from the VM perspective, migration must not be allowed. Any info / comments / feedback appreciated. Regards,

2 1

Re: Cannot Increase Hosted Engine VM Memory
by Dionysis K 04 Sep '19

04 Sep '19

Now i noticed another strange i deactivated the memory balloon option from the VM hosted engine and tried to update the values again with the same memory it still keeps the value of memory size at 5120 while the value of physical memory guaranteed it changed to what we desire at the 8192 value and then the error appears again in the vm engine i ckecked the engine log file it shows the same errors! is there are other logfile locations that can give us any clues ?

1 0

Re: Cannot Increase Hosted Engine VM Memory
by Douglas Duckworth 04 Sep '19

04 Sep '19

Yes, I do. Gold crown indeed. It's the "HostedEngine" as seen attached! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 23, 2019 at 12:02 PM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 23, 2019 at 5:51 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hi Simone Can I get help with this issue? Still cannot increase memory for Hosted Engine. From the logs it seams that the engine is trying to hotplug memory to the engine VM which is something it should not happen. The engine should simply update engine VM configuration in the OVF_STORE and require a reboot of the engine VM. Quick question, in the VM panel do you see a gold crown symbol on the Engine VM? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 8:08 AM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sure, they're attached. In "first attempt" the error seems to be: 2019-01-17 07:49:24,795-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [680f82b3-7612-4d91-afdc-43937aa298a2] EVENT_ID: FAILED_HOT_SET_MEMORY_NOT_DIVIDABLE(2,048), Failed to hot plug memory to VM HostedEngine. Amount of added memory (4000MiB) is not dividable by 256MiB. Followed by: 2019-01-17 07:49:24,814-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-29) [26f5f3ed] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:49:24,815-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-29) [26f5f3ed] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. In "second attempt" I used values that are dividable by 256 MiB so that's no longer present. Though same error: 2019-01-17 07:56:59,795-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] START, SetAmountOfMemoryVDSCommand(HostName = ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu>, Params:{hostId='cdd5ffda-95c7-4ffa-ae40-be66f1d15c30', vmId='adf14389-1563-4b1a-9af6-4b40370a825b', memoryDevice='VmDevice:{id='VmDeviceId:{deviceId='7f7d97cc-c273-4033-af53-bc9033ea3abe', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='memory', type='MEMORY', specParams='[node=0, size=2048]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}', minAllocatedMem='6144'}), log id: 50873daa 2019-01-17 07:56:59,855-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] FINISH, SetAmountOfMemoryVDSCommand, log id: 50873daa 2019-01-17 07:56:59,862-05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-22) [7059a48f] EVENT_ID: HOT_SET_MEMORY(2,039), Hotset memory: changed the amount of memory on VM HostedEngine from 4096 to 4096 2019-01-17 07:56:59,881-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-22) [28fd4c82] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:56:59,882-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-22) [28fd4c82] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. This message repeats throughout engine.log: 2019-01-17 07:55:43,270-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [] EVENT_ID: VM_MEMORY_UNDER_GUARANTEED_VALUE(148), VM HostedEngine on host ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu> was guaranteed 8192 MB but currently has 4224 MB As you can see attached the host has plenty of memory. Thank you Simone! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 5:09 AM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 16, 2019 at 8:22 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sorry for accidental send. Anyway I try to increase physical memory however it won't go above 4096MB. The hypervisor has 64GB. Do I need to modify this value with Hosted Engine offline? No, it's not required. Can you please attach your engine.log for the relevant time frame? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 16, 2019 at 1:58 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hello I am trying to increase Hosted Engine physical memory above 4GB Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGSXQVVPJJ2CR…<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…>

3 8