- Users - oVirt List Archives

Bond Mode 1 （Active-Backup）,vm unreachable for minutes when bond link change
by henaumars＠sina.com 06 Jun '19

06 Jun '19

Hello, I've a problem, all my ovirt hosts and vms are linked with a bonding mode 1（Active-Backup）2x10Gbps ovirt version：4.3 topology： ----------eno2 vm----------ovirtmgmt------bond0-----------eno1 ifcfg-bond0： # Generated by VDSM version 4.30.9.1 DEVICE=bond0 BONDING_OPTIOS='mode=1 miion=100' BRIDGE=ovirtmgmt MACADDR=a4:be:26:16:e9:b2 ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLER=no IPV6INIT=no ifcfg-eno1: # Generated by VDSM version 4.30.9.1 DEVICE=eno1 MASTER=bond0 SLAVE=yes ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLER=no IPV6INIT=no ifcfg-eno2: # Generated by VDSM version 4.30.9.1 DEVICE=eno2 MASTER=bond0 SLAVE=yes ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLER=no IPV6INIT=no ifcfg-ovirtmgmt: # Generated by VDSM version 4.30.9.1 DEVICE=ovirtmgmt TYPE=Brodge DELAY=0 STP=off ONBOOT=yes IPADDR=x.x.x.x NEYMASK=255.255.255.0 GATEWAY=x.x.x.x BOOTPROTO=none MTU=1500 DEFROUTE=yes NM_CONTROLLER=no IPV6INIT=yes IPV6_AUTOCONF=yes cat /proc/net/bonding/bond0 Ethernet Chanel Bonding Driver:v3.7.1(April 27, 2011) Bonding Mode:fault-tolerance(active-ackup) Primary Slave:none Currently Active Slave:eno1 MII Status:up MII Polling Intercal (ms):100 Up Delay (ms) : 0 Down Delay (ms) : 0 Slave Interface :eno1 MII Status:up Speed : 10000 Mbps Link Failure Count : 0 Permanent HW addr :a4:be:26:16:e9:b2 Slave queue ID: 0 Slave Interface :eno2 MII Status:up Speed : 10000 Mbps Link Failure Count : 0 Permanent HW addr :a4:be:26:16:e9:b2 Slave queue ID: 0 ping vm from different subnet. Eveything is okay if I don't change bond link interface。When I unplug Currently Active Slave eno1,bond link change to eno2 as expected but vm become unreachable until external physical switch MAC Table ageing time expired.It seems that vm doesn't sent gratuitous ARP when bond link change. How can I fix if? vm os is Centos 7.5 ovirt version 4.2 also tested.

3 3

oVirt on RHEL 8.
by vrk5398＠gmail.com 05 Jun '19

05 Jun '19

Hello Did anyone managed to install oVirt on RHEL8? If so, Can you please guide me? I'm trying to install but it throws an error as "Failed to synchronize repo for ovirt-*". Please help me. Thank You.

3 4

Re: oVirt on RHEL 8.
by Strahil 05 Jun '19

05 Jun '19

Ovirt is still based on EL7. You have to wait till official announcement. Best Regards, Strahil NikolovOn Jun 5, 2019 15:52, vrk5398(a)gmail.com wrote: > > Hello > Did anyone managed to install oVirt on RHEL8? > If so, Can you please guide me? > I'm trying to install but it throws an error as "Failed to synchronize repo for ovirt-*". > Please help me. > > Thank You. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZBPBZCIAKFA4V…

1 0

oVirt Hosted-Engine upgrade filed
by mail＠set-pro.net 05 Jun '19

05 Jun '19

Hello! Get problems with upgrade oVirt Hosted-Engine from 4.2.8 to 4.3.3. After installing http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm on Engine VM i run yum update, then engine-setup and got this error: --== DATABASE CONFIGURATION ==-- [WARNING] This release requires PostgreSQL server 10.6 but the engine database is currently hosted on PostgreSQL server 9.5.14. [ INFO ] Verifying PostgreSQL SELinux file context rules [ ERROR ] Failed to execute stage 'Environment customization': could not stat file "base/13699369/1259_fsm": Permission denied [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20190602110956-iqr6bc.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20190602111120-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed But i don't find any solution how resolve this issue. Maybe i doing something wrong?

3 6

Followup: Create New VM from Template Glitch
by Andrei Verovski 05 Jun '19

05 Jun '19

Hi ! Followup to my previous post. Creating template from snapshot in 4.2.8 also suffers from the same bug - allocation policy selected to thin provision even if I select RAW from the popup menu. Verified twice. > Looks like there is some strange glitch creating new VM from template on oVirt 4.2.8.2. > > Basically I’m need to convert disk image from QCOW2 thin allocated to raw format in an existing VM. > These are steps performed: > 1) Create snapshot of an existing VM. > 2) Make template from snapshot. > 3) Create new VM using template, in Resource Allocation -> Storage Allocation -> Clone -> Format -> Raw. > > Unfortunately, newly created VM still have QCOW2 thin allocated disk. > Did this operation twice to be sure, and both times things went wrong. > > What is done wrong, and how to solve this problem? > Thanks in advance. >

2 5

Create New VM from Template Glitch
by Andrei Verovski 05 Jun '19

05 Jun '19

Hi ! Looks like there is some strange glitch creating new VM from template on oVirt 4.2.8.2. Basically I’m need to convert disk image from QCOW2 thin allocated to raw format in an existing VM. These are steps performed: 1) Create snapshot of an existing VM. 2) Make template from snapshot. 3) Create new VM using template, in Resource Allocation -> Storage Allocation -> Clone -> Format -> Raw. Unfortunately, newly created VM still have QCOW2 thin allocated disk. Did this operation twice to be sure, and both times things went wrong. What is done wrong, and how to solve this problem? Thanks in advance. Andrei

1 0

storware vProtect
by Giulio Casella 05 Jun '19

05 Jun '19

Hi everyone, I'm evaluating some datacenter backup solution, and finally I'm going to give a chance to storware vprotect for my ovirt DC (2 clusters, 3+32 hypervisors, about 100+ VMs). How many of you are using it? Any suggestion? Any caveat not immediately visible? Hints? Drawbacks? For example I have some problem mounting backup of some VM (pfsense firewalls), based on UFS filesystem. And I couldn't browse mounted backup from WebUI (NFS problems between server and node). I know these are problems I can easily get around, but I'm more concerned about issue I can't see right now. TIA, gc

1 0

Issue with oVirt aaa-ldap connector on fresh install of 4.3.3
by Vrgotic, Marko 05 Jun '19

05 Jun '19

________________________________ From: Vrgotic, Marko Sent: Tuesday, June 4, 2019 4:44:08 PM To: users(a)ovirt.org Cc: Stojchev, Darko Subject: Issue with aaa-ldap connector on fresh install of 4.3.3 Dear oVIrt, We are running 4.3.3 latest with SHE. Tried to connect our domain users using aaa-ldap extension tool provided. We tried multiple different accounts, with multiple dn search tree syntaxes and verified the passwords. The error is always the same: `2019-06-04 14:03:30,763+0000 ERROR otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._customization_late:835 Cannot authenticate using 'uid=**FILTERED**,ou=ABC Users,dc=example,dc=com': {'info': '80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1', 'desc': 'Invalid credentials'}` The log file is showing the following: 2019-06-04 14:02:31,666+0000 DEBUG otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._getURLs:283 URLs: [u'ldap://hqdc2.example.com:389', u'ldap://eudc1.example.com:389', u'ldap://eudc2.example.com:389', u'ldap://hqdc1.example.com:389'] 2019-06-04 14:02:31,666+0000 INFO otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._connectLDAP:393 Connecting to LDAP using 'ldap://hqdc2.example.com:389' 2019-06-04 14:02:31,675+0000 INFO otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._connectLDAP:444 Executing startTLS 2019-06-04 14:02:32,420+0000 DEBUG otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._connectLDAP:447 Perform search 2019-06-04 14:02:32,567+0000 DEBUG otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._connectLDAP:455 Result: [('', {'supportedLDAPVersion': ['3', '2']})] 2019-06-04 14:02:32,568+0000 INFO otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._connectLDAP:457 Connection succeeded 2019-06-04 14:02:32,568+0000 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVAAALDAP_LDAP_USER 2019-06-04 14:02:32,568+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Enter search user DN (for example uid=username,dc=example,dc=com or leave empty for anonymous): 2019-06-04 14:02:57,540+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:RECEIVE uid=da-dstojchev,ou=Users,dc=example,dc=com 2019-06-04 14:02:57,541+0000 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVAAALDAP_LDAP_PASSWORD 2019-06-04 14:02:57,541+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Enter search user password: 2019-06-04 14:03:00,713+0000 INFO otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._bindLDAP:478 Attempting to bind using 'uid=da-dstojchev,ou=Users,dc=example,dc=com' 2019-06-04 14:03:00,862+0000 ERROR otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._customization_late:835 Cannot authenticate using 'uid=da-dstojchev,ou=Users,dc=example,dc=com': {'info': '80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1', 'desc': 'Invalid credentials'} 2019-06-04 14:03:00,863+0000 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVAAALDAP_LDAP_USER 2019-06-04 14:03:00,863+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Enter search user DN (for example uid=username,dc=example,dc=com or leave empty for anonymous): 2019-06-04 14:03:27,376+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:RECEIVE uid=openstack-test,ou=ABC Users,dc=example,dc=com 2019-06-04 14:03:27,376+0000 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVAAALDAP_LDAP_PASSWORD 2019-06-04 14:03:27,377+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Enter search user password: 2019-06-04 14:03:30,616+0000 INFO otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._bindLDAP:478 Attempting to bind using 'uid=**FILTERED**,ou=ABC Users,dc=example,dc=com' 2019-06-04 14:03:30,763+0000 ERROR otopi.plugins.ovirt_engine_extension_aaa_ldap.ldap.common common._customization_late:835 Cannot authenticate using 'uid=**FILTERED**,ou=ABC Users,dc=example,dc=com': {'info': '80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1', 'desc': 'Invalid credentials'} 2019-06-04 14:03:30,764+0000 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVAAALDAP_LDAP_USER 2019-06-04 14:03:30,764+0000 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Enter search user DN (for example uid=username,dc=example,dc=com or leave empty for anonymous): 2019-06-04 14:03:41,055+0000 DEBUG otopi.context context._executeMethod:145 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-engine-extension-aaa-ldap/setup/bin/../plugins/ovirt-engine-extension-aaa-ldap/ldap/common.py", line 812, in _customization_late default='', File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 211, in queryString value = self._readline(hidden=hidden) File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in _readline value = self.__input.readline() File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG2 2019-06-04 14:03:41,057+0000 ERROR otopi.context context._executeMethod:154 Failed to execute stage 'Environment customization': SIG2 2019-06-04 14:03:41,057+0000 DEBUG otopi.context context.dumpEnvironment:731 ENVIRONMENT DUMP – BEGIN This is fresh install of oVIrt 4.3.3 latest, assigned for our prod env. Kindly awaiting your reply, Marko Vrgotic ActiveVideo

1 0

Planned restart of production services
by Evgheni Dereveanchin 04 Jun '19

04 Jun '19

Hi everyone, I will be restarting several production systems within the following hour to apply updates. The following services may be unreachable for some period of time: - resources.ovirt.org - package repositories - jenkins.ovirt.org - CI master - glance.ovirt.org - Glance image repository Package repositories will be unreachable for a short period of time. No new CI jobs will be started during this period. I will announce you once maintenance is complete. -- Regards, Evgheni Dereveanchin

1 1

fence_rhevm not working with ovirt 4.3.4.2-1.el7 (RC2)
by Strahil Nikolov 04 Jun '19

04 Jun '19

Hello Community, I'm sending this e-mail just to notify you that I have raised a bug for the fence_rhevm (RHEL 8) which has problems parsing the response from the oVirt's API. The bug is : 1717179 – fence_rhevm cannot obtain plug status on oVirt 4.3.4.2-1.el7 (RC2) | | | | 1717179 – fence_rhevm cannot obtain plug status on oVirt 4.3.4.2-1.el7 (... | | | I guess the package won't work also with RHV (unless the changes in the API are in a recent version). Best Regards,Strahil Nikolov

1 0