- Users - oVirt List Archives

Gluster messages after upgrade to 4.3.1
by Stefano Danzi 01 Mar '19

01 Mar '19

Hello, I've just upgrade to version 4.3.1 and I can see this message in gluster log of all my host (running oVirt Node): The message "E [MSGID: 101191] [event-epoll.c:671:event_dispatch_epoll_worker] 0-epoll: Failed to dispatch handler" repeated 59 times between [2019-03-01 10:21:42.099983] and [2019-03-01 10:23:38.340971 Another strange thing: A Vm was running. I shutted down it fo mistake. I was no more able to run this vm. The error was: "Bad volume specification ". After a little investigation I notice that disk image was no more owned by vdsm.kvm but root.root. I changed back to correct value and vm started fine.

3 2

Ovirt 4.3 RC missing glusterfs-gnfs
by Strahil 01 Mar '19

01 Mar '19

7 15

Ovirt 4.3.1 Install failed
by kiv＠intercom.pro 01 Mar '19

01 Mar '19

Hi all. Testing fresh install 4.3.1 Install Node 4.3 - ok Install Engine from Cockpit - not working. Install Engine from CLI - not working, we get error: [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The resolved address doesn't resolve on the selected interface\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook Vlans are not used.

2 1

[oVirt 4.3.1-RC2 Test Day] Hyperconverged HE Deployment
by Guillaume Pavese 01 Mar '19

01 Mar '19

Hi, I tried again today to deploy HE on Gluster with oVirt 4.3.1 RC2 on a clean Nested environment (no precedent deploy attempts to clean before...). Gluster was deployed without problem from cockpit. I then snapshoted my vms before trying to deploy HE both from cockpit, then from cmdline. Both attempts failed at the same spot : [ INFO ] Creating Storage Domain [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] [ ERROR ] ConnectionError: Error while sending HTTP request: (7, 'Failed connect to vs-inf-int-ovt-fr-301-210.hostics.fr:443; No route to host') [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": false, "msg": "Error while sending HTTP request: (7, 'Failed connect to vs-inf-int-ovt-fr-301-210.hostics.fr:443; No route to host')"} Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: [root@vs-inf-int-kvm-fr-301-210 ~]# traceroute vs-inf-int-ovt-fr-301-210.hostics.fr traceroute to vs-inf-int-ovt-fr-301-210.hostics.fr (192.168.122.147), 30 hops max, 60 byte packets 1 vs-inf-int-kvm-fr-301-210.hostics.fr (192.168.122.1) 3006.344 ms !H 3006.290 ms !H 3006.275 ms !H Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

3 4

error: "cannot set lock, no free lockspace" (localized)
by Mike Lykov 01 Mar '19

01 Mar '19

Hi all. I have a HCI setup, glusterfs 3.12, ovirt 4.2.7, 4 nodes Yesterday I see 3 VMs detected by engine as "not responding" (it is marked as HA VMs) (it all located on ovirtnode1 server) Two of them are restarted by engine on other nodes successfully, but one are not. All get LOCALIZED message like 'cannot set lock: no free space on device' - what is this ? Why engine get that errors, and why some VMs can restart automatically, some not (but successfully restarted bu user via webui after some pause?) Who knows, what are you think? Full engine logs may be uploaded. from engine.log: start event --------------- 2019-02-26 17:04:05,308+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,865+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM openfire.miac is not responding. 2019-02-26 17:04:05,865+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM '7a3af2e7-8296-4fe0-ac55-c52a4b1de93f'(e-l-k.miac) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,894+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM e-l-k.miac is not responding. 2019-02-26 17:04:05,895+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM 'de76aa6c-a211-41de-8d85-7d2821c3980d'(tsgr-mon) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,926+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM tsgr-mon is not responding. --------------------------- 2019-02-26 17:04:22,237+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: VM has been terminated on the host. .... 2019-02-26 17:04:22,374+04 INFO [org.ovirt.engine.core.bll.VdsEventListener] (ForkJoinPool-1-worker-9) [] Highly Available VM went down. Attempting to restart. VM Name 'openfire.miac', VM Id 'd546add1-126a-4490-bc83-469bab659854' ... 2019-02-26 17:04:27,737+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host. ... 2019-02-26 17:04:28,350+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886073) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM openfire.miac on Host ovirtnode6.miac 2019-02-26 17:04:31,841+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host. 2019-02-26 17:04:31,877+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886082) [] EVENT_ID: VDS_INITIATED_RUN_VM_FAILED(507), Failed to restart VM openfire.miac on Host ovirtnode6.miac ... 2019-02-26 17:04:31,994+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886082) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM openfire.miac on Host ovirtnode1.miac ..... 2019-02-26 17:04:36,054+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: Не удалось установить блокировку: На устройстве не осталось свободного места. 2019-02-26 17:04:36,054+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) to rerun treatment 2019-02-26 17:04:36,091+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886083) [] EVENT_ID: VDS_INITIATED_RUN_VM_FAILED(507), Failed to restart VM openfire.miac on Host ovirtnode1.miac ------------------- No more attemtps for this VM were made (state now is 'Down') Engine tried restart this VM on some other nodes, get ' Lease is held by another host' (it is normal, because timeout for lock not expired?) and then got (LOCALIZED MESSAGE ?? Why it is localized while all other are not?) 'cannot set lock: no free space on device' Which 'device' it mean? How to see how many 'free space' in it? gluster volumes almost empty: ovirtstor1.miac:/engine 150G 7,5G 143G 5% /rhev/data-center/mnt/glusterSD/ovirtstor1.miac:_engine ovirtnode1.miac:/data 5,9T 42G 5,9T 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_data ovirtnode1.miac:/vmstore 4,4T 194G 4,2T 5% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_vmstore ovirtnode1.miac:/iso_storage 600G 1,3G 599G 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_iso__storage ovirtnode1.miac:/export 5,1T 14G 5,1T 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_export Other VMs also get this error about free space: ------------- 2019-02-26 17:05:05,142+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) [] EVENT_ID: VM_DOWN_ERROR(119), VM tsgr-mon is down with error. Exit message: Не удалось установить блокир овку: На устройстве не осталось свободного места. 2019-02-26 17:05:43,526+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-11) [] VM 'de76aa6c-a211-41de-8d85-7d2821c3980d'(tsgr-mon) moved from 'PoweringUp' --> 'Up' 2019-02-26 17:05:43,537+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM tsgr-mon on Host ovirtnode6.miac ---------------- And it is last message about this VM, state now is 'Up' Therefore all VMs are migrated from this node ovirtnode1, and later in log are records about it unresponsiveness: 2019-02-26 17:07:43,584+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler9) [35e05907] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ovirtnode1.miac command GetGlusterVolumeHealIn foVDS failed: Message timeout which can be caused by communication issues 2019-02-26 17:07:43,592+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886194) [35e05907] EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Host ovirtnode1.miac i s not responding. It will stay in Connecting state for a grace period of 60 seconds and after that an attempt to fence the host will be issued. 2019-02-26 17:07:49,684+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] EVENT_ID: FENCE_OPERATION_USING_AGENT_AND_PROXY_STARTED(9,020), Executing power management status on Host ovirtnode1.miac using Proxy Host ovirtnode5.miac and Fence Agent ipmilan:172.16.16.1. 2019-02-26 17:07:49,685+04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] START, FenceVdsVDSCommand(HostName = ovirtnode5.miac, ... action='STATUS', agent='FenceAgent:{id='338cbdd9-aab6-484c-a906-21e747a96a84', ... type='ipmilan', ip='172.16.16.1', port='null', user='admin', password='***', encryptOptions='false', options=''}', policy='null'}), log id: 281e6c2019-02-26 17:07:49,942+04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] FINISH, FenceVdsVDSCommand, return: FenceOperationResult:{status='SUCCESS', powerStatus='ON', message=''}, log id: 281e6c 2019-02-26 17:07:56,131+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [317316e4] EVENT_ID: SYNC_STORAGE_DEVICES_IN_HOST(4,126), Manually synced the storage devices from host ovirtnode1.miac 2019-02-26 17:07:56,550+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [3a88be4f] EVENT_ID: VDS_DETECTED(13), Status of host ovirtnode1.miac was set to Up. 2019-02-26 17:07:56,554+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [3a88be4f] EVENT_ID: VDS_FENCE_STATUS(496), Host ovirtnode1.miac power managementwas verified successfully. ------------- After all, now I try to start VM that not restarted automatically: ------------- 2019-02-27 11:23:30,139+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2921212) [8e405cb9-3a3a-42ab-ae05-5aaf40194b30] EVENT_ID: USER_STARTED_VM(153), VM openfire.miac was started by admin@internal-authz (Host: ovirtnode1.miac). ..... 2019-02-27 11:24:12,489+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-1) [] VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) moved from 'PoweringUp' --> 'Up' 2019-02-27 11:24:12,502+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-1) [] EVENT_ID: USER_RUN_VM(32), VM openfire.miac started on Host ovirtnode1.miac --------------- It started without problems on same host ovirtnode1. Strange. -- Mike

2 3

VM poor iops
by Leo David 01 Mar '19

01 Mar '19

Hi Everyone, I am encountering the following issue on a single instance hyper-converged 4.2 setup. The following fio test was done: fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test --filename=test --bs=4k --iodepth=64 --size=4G --readwrite=randwrite The results are very poor doing the test inside of a vm with a prealocated disk on the ssd store: ~2k IOPS Same test done on the oVirt node directly on the mounted ssd_lvm: ~30k IOPS Same test done, this time on the gluster mount path: ~20K IOPS What could be the issue that the vms have this slow hdd performance ( 2k on ssd !! )? Thank you very much ! -- Best regards, Leo David

4 11

oVirt - Unable to delete VM snapshots
by dean＠datacom.ca 28 Feb '19

28 Feb '19

Unable to delete VM snapshots. Error messages and log info below. Running oVirt VM 4.2.8.2-1.el7, I haven't been able to find good documentation on how to fix. Can someone point me in the right direction? Thank you, ... Dean Feb 28, 2019, 3:32:34 PM Failed to delete snapshot 'Centos7_20190120' for VM 'n2_Centos7'. Feb 28, 2019, 3:32:28 PM VDSM n1 command HSMGetAllTasksStatusesVDS failed: Volume does not exist: (u'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622',) Feb 28, 2019, 3:32:22 PM VDSM n2 command MergeVDS failed: Merge failed The VM has snapshot(s) with disk(s) in illegal status. Please don't shutdown the vm before successfully retrying the snapshot delete. engine.log 2019-02-28 15:32:33,420-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Merging o f snapshot '3ddab9e6-a6ce-40d6-9ec6-815251471c5f' images 'fb974fb8-99d3-4a69-9f4e-096e30b85749'..'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622' failed. Images have been marked illegal and can no longer be previewed or reverted to. Please retry Live Merge on the snapshot to complete the operation. 2019-02-28 15:32:33,429-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Ending co mmand 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand' with failure. 2019-02-28 15:32:33,578-05 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Command 'Remov eSnapshot' id: '2243e15a-2569-498c-b0f8-de345321ba2f' child commands '[2e8dccfe-1c17-40ec-9f98-84f61863e450]' executions were completed, status 'FAILED' 2019-02-28 15:32:34,773-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Ending command 'org.ovi rt.engine.core.bll.snapshots.RemoveSnapshotCommand' with failure. 2019-02-28 15:32:35,023-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Failed to delete snapshot 'Centos7_20190120' for VM 'n2_Centos7'. vdsm.log 2019-02-28 15:32:22,251-0500 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Host.getStats succeeded in 0.02 seconds (__init__:573) 2019-02-28 15:32:22,326-0500 INFO (jsonrpc/0) [root] /usr/libexec/vdsm/hooks/after_get_caps/50_openstacknet: rc=0 err= (hooks:110) 2019-02-28 15:32:22,449-0500 INFO (jsonrpc/6) [api.host] START getAllVmStats() from=::ffff:192.168.1.10,48074 (api:46) 2019-02-28 15:32:22,452-0500 INFO (jsonrpc/6) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:192.168.1.10,48074 (api:52) 2019-02-28 15:32:22,453-0500 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.00 seconds (__init__:573) 2019-02-28 15:32:22,669-0500 INFO (jsonrpc/4) [api.virt] START merge(drive={u'imageID': u'96fbec76-c518-4010-8988-46b3c3172f09', u'volumeID': u'f7f1a3ec-d936-4482-8ec9-af2b3990b111', u'domainID': u'34af4473 -0779-42a0-8b97-e1ccc725fd60', u'poolID': u'5a3025a3-005f-03d4-0333-000000000382'}, baseVolUUID=u'fb974fb8-99d3-4a69-9f4e-096e30b85749', topVolUUID=u'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622', bandwidth=u'0', jo bUUID=u'0b551b37-a6ee-4ac7-a004-2d410eaa8304') from=::ffff:192.168.1.10,48074, flow_id=f702317d-87cc-41dd-bcb2-12c6a2a93f10, vmId=a9082c6d-038e-4eb5-8436-69f93839a2ec (api:46) 2019-02-28 15:32:22,693-0500 INFO (jsonrpc/0) [root] /usr/libexec/vdsm/hooks/after_get_caps/openstacknet_utils.py: rc=0 err= (hooks:110) 2019-02-28 15:32:22,730-0500 ERROR (jsonrpc/4) [virt.vm] (vmId='a9082c6d-038e-4eb5-8436-69f93839a2ec') merge: Cannot find volume b2391a0b-c9e5-4dfe-9551-1e1f25c5c622 in drive vda's volume chain (vm:5944) 2019-02-28 15:32:22,731-0500 INFO (jsonrpc/4) [api.virt] FINISH merge return={'status': {'message': 'Merge failed', 'code': 52}} from=::ffff:192.168.1.10,48074, flow_id=f702317d-87cc-41dd-bcb2-12c6a2a93f10, vmId=a9082c6d-038e-4eb5-8436-69f93839a2ec (api:52)

2 1

[ANN] oVirt 4.3.1 is now generally available
by Sandro Bonazzola 28 Feb '19

28 Feb '19

The oVirt Project is pleased to announce the general availability of oVirt 4.3.1, as of February 26th, 2019. This update is the first in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28 and still pending a build from Fedora project. oVirt Node has been updated including: - oVirt 4.3.1: http://www.ovirt.org/release/4.3.1/ - ansible-2.7.8: https://github.com/ansible/ansible/blob/stable-2.7/changelogs/CHANGELOG-v2.… Relevant EPEL Errata included: - FEDORA-EPEL-2019-5f2f93029f security update in Fedora EPEL 7 for ansible ( https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2019-5f2f93029f ) Relevant CentOS Errata included: - CESA-2019:0231 Important CentOS 7 spice Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023192.html ) - CESA-2019:0368 Important CentOS 7 systemd Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023202.html ) Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

non-redhat version of ovirt-host-deploy
by ivan.kabaivanov＠gmail.com 28 Feb '19

28 Feb '19

Hi, I'm trying to get ovirt working on Linux From Scratch. So far so good, I can build and install it, and engine-setup also works fine. Now, I'm at the last stage, configuring it. And this is where I hit serious trouble: ovirt-host-deploy requires dnf/yum/rpm. But since I'm not running a redhat-based distro, I have none of those. Short of reading the source code, what are the steps I need to manually perform to get a working host? Thanks, IvanK.

2 3

reinstall centos node (ovirt 4.2.7) fails due missing dependency on librbd1
by Mike Lykov 28 Feb '19

28 Feb '19

Hi All! I'm using ovirt-release42-4.2.7.1-1.el7.noarch centos-release-7-5.1804.5.el7.centos.x86_64 And HCI glusterfs deployment (no ceph). And yesterday I wanted an add hosted engine deploy on some node. It requires to enable maintenance mode, reinstall node with "hosted engine = deploy" config (in webui). I made it, but reinstall fails. In logs I see (not full list): ... Feb 27 16:35:39 Updated: libvirt-daemon-4.5.0-10.el7_6.4.x86_64 Feb 27 16:35:39 Updated: libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 After it # rpm -q librbd1 librbd1-0.94.5-2.el7.x86_64 фев 27 16:36:51 ovirtnode5.miac systemd[1]: Starting Virtualization daemon... фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : libvirt version: 4.5.0, package: 10.el7_6.4 (CentOS BuildSystem <http://bugs.centos.org>, 2019-01-29-17:31:22, x86-01.bsys.centos.org) фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : hostname: ovirtnode5.miac фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: error : virModuleLoadFile:53 : внутренняя ошибка: Failed to load module '/usr/lib64/libvirt/storage-backend/libvirt_storage_backend_rbd.so': /usr/lib64/libv irt/storage-backend/libvirt_storage_backend_rbd.so: undefined symbol: rbd_diff_iterate2 фев 27 16:36:51 ovirtnode5.miac systemd[1]: libvirtd.service: main process exited, code=exited, status=3/NOTIMPLEMENTED фев 27 16:36:51 ovirtnode5.miac systemd[1]: Failed to start Virtualization daemon. There is a old bugs like https://bugzilla.redhat.com/show_bug.cgi?id=1316911 or new posts like http://dreamcloud.artark.ca/libvirtd-failure-after-latest-upgrade-in-rhel-c… Obviously, the libvirt* rpms are updated, but librbd* not. But why? Why libvirt packages are not strictly dependenced on all required package/lib versions? libvirt-daemon-driver-storage-rbd must require exactly that librbd version that can work with, i think. -- Mike

1 0