- Users - oVirt List Archives

Not able to install HostedEngine
by Stefan Wolf 13 Dec '18

13 Dec '18

Hello, i like to setup a complete new cluster I install the version 4.2.1.7 I set up ip during installation process After reboot I enable by changing /etc/sysconfig/network-scripts/ifcfg-ens1f0 from ONBOOT=no to yes Than I try to install hosted-engine as described here: https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_… I prepare the installation process with yum install ovirt-engine-appliance then i 've tried both variants grafical installation with cockpit and the cli after setting up the network, the network is no longer working and the installtion will break everything seems fine but network isn't running a reboot will not help thx stefan [image: image.png]

1 0

Ovirt 4.3 Alpha AMD 2970WX Windows VM creation and NUMA
by Darin Schmidt 13 Dec '18

13 Dec '18

Not sure if Users is the best place for this as Im using 4.3 to test support for my AMD 2970WX Threadripper but While trying to setup a Windows VM, it fails. I have a working CentOS 7 running. Heres what I get when I try to startup the VM. VM Windows-Darin is down with error. Exit message: internal error: process exited while connecting to monitor: WARNING: Image format was not specified for '/dev/sg0' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. 2018-12-02T18:43:05.358741Z qemu-kvm: warning: CPU(s) not present in any NUMA nodes: CPU 10 [socket-id: 10, core-id: 0, thread-id: 0], CPU 11 [socket-id: 11, core-id: 0, thread-id: 0], CPU 12 [socket-id: 12, core-id: 0, thread-id: 0], CPU 13 [socket-id: 13, core-id: 0, thread-id: 0], CPU 14 [socket-id: 14, core-id: 0, thread-id: 0], CPU 15 [socket-id: 15, core-id: 0, thread-id: 0] 2018-12-02T18:43:05.358791Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future 2018-12-02T18:43:05.359052Z qemu-kvm: can't apply global EPYC-x86_64-cpu.hv-synic=on: Property '.hv-synic' not found. NUMA doesnt seem to resolve the issue any even if I set NUMA to be 1 and place it on a NUMA that has 12 cores and 64GB ram. I also dont fully understand NUMA because it creates 4 NUMA sockets even though technically there should be 2 correct? I dont get how NUMA is setup, but either way it doesnt help resolve any issues. [root@ovirt ~]# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 24 25 26 27 28 29 node 0 size: 65429 MB node 0 free: 54322 MB node 1 cpus: 12 13 14 15 16 17 36 37 38 39 40 41 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: 6 7 8 9 10 11 30 31 32 33 34 35 node 2 size: 32754 MB node 2 free: 27699 MB node 3 cpus: 18 19 20 21 22 23 42 43 44 45 46 47 node 3 size: 0 MB node 3 free: 0 MB node distances: node 0 1 2 3 0: 10 16 16 16 1: 16 10 16 16 2: 16 16 10 16 3: 16 16 16 10 link to my messages and vdsm log https://drive.google.com/open?id=1v-Wjcj7xLZIcR2GKR-P659yE14r1-hsz https://drive.google.com/open?id=1BHvcS2Dgan68hQkVdOmme1gP1ciSsejL

3 6

removal of 3 vdsm hooks
by Dan Kenigsberg 13 Dec '18

13 Dec '18

I've identified 3 ancient vdsm-hooks that have been obsoleted by proper oVirt features. vdsm-hook-isolatedvlan: obsoleted in ovirt-4.2.6 by clean-traffic-gateway filter https://gerrit.ovirt.org/#/q/I396243e1943eca245ab4da64bb286da19f9b47ec vdsm-hook-qos: obsoleted in ovirt-3.3 by https://www.ovirt.org/documentation/sla/network-qos/ vdsm-hook-noipspoof: obsoleted in ovirt-4.0 by choosing the "clean-traffic" filter https://ovirt.org/feature/networkfilter I would like to remove this code from vdsm-4.30, destined for ovirt-4.3. Is there any objection for that? Is anybody still using them? Regards, Dan.

3 3

4.2.7 & centos 7.6 dependency problems
by Demeter Tibor 13 Dec '18

13 Dec '18

Dear All, I would like to upgrade my ovirt 4.2.5 to 4.2.7. The hosted engine upgrade was success, but on the nodes i've got an dependency error: ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: mesa-libgbm-18.0.5-3.el7.x86_64 --> Processing Dependency: libwayland-server.so.0()(64bit) for package: mesa-libgbm-18.0.5-3.el7.x86_64 ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed --> Running transaction check ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution --> Running transaction check ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 Available: nbdkit-1.2.6-1.el7.x86_64 (base) nbdkit(x86-64) = 1.2.6-1.el7 Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) nbdkit(x86-64) = 1.2.6-1.el7_6.2 Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) nbdkit(x86-64) = 1.2.7-2.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I solve this? Thanks in advance, Regards, Tibor

4 6

Network Setup after ovirt node Install and before add node to cluster
by Stefan Wolf 12 Dec '18

12 Dec '18

Hello, I ve downloaded an installed OVIRT NODE 4.2.7.1. During the installation I ‘ve setup a static ip (I ‘ve also tried dhcp, both work) The installation passes and after the reboot ovirt node starts without any problems. BUT the network is not configured. I know https://www.ovirt.org/documentation/install-guide/chap-oVirt_Nodes/ and I know https://www.ovirt.org/documentation/admin-guide/chap-Hosts/ and now I am between these two documents oVirt is installed but network is not configured to add it to datacenter of course I know the scripts under /etc/sysconfig/network-scripts do I really have do edit it manuel? if I change ip in command line ip a add … dev.. and ip route add … it fails to add node to datacenter - with one of the last version I ‘ve added the IP address in bash - added the host to datacenter, - after reboot readd the ip address in bash after reboot - an then I could change network settings in oVirt Manger What is best practices for adding a node to datacenter when the ip address is not assigned after installation Thx shb

5 5

Ovirt Maximums
by Brian Wilson 12 Dec '18

12 Dec '18

Is there a resource available that would describe the configurable maximums for the Ovirt Engine and Ovirt Nodes. Things like: How many Logical Networks per host? If one does not exist does anyone have any experiences with reaching limits that caused issues specifically with regards to the number of networks on hosts.

2 2

Ovirt Node Installation issue on Ovirt 4.2
by Hemant Gupta 11 Dec '18

11 Dec '18

Hi, I have downloaded the ISO on physical server but I am unable to attach to my ovirt engine as it showing vdsm error but during update on CentosOS launched with ISO its giving below : [root@r yum.repos.d]# sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, vdsmupgrade Examining /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: ovirt-release42-4.2.7-1.el7.noarch /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: does not update installed package. Error: Nothing to do Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id Cannot upload enabled repos report, is this client registered?

1 0

Configuring Gluster Hyperconverged on Cloud
by pawan.ratwani＠tcs.com 11 Dec '18

11 Dec '18

Hi, I would like to do hands-on on Gluster Hyperconverged environment, and as per my understanding compute and storage has to be on the same hosts. Since I don't have physical infra to support such configuration, I would like to setup 3-node cluster on Cloud e.g. AWS, or Azure. I would like to know if I create an EC2 instance on AWS (or on Azure) with the desired Compute, Storage and Network capacity, is Gluster-hyperconverged cluster setup supported for such deployment ? I am referring https://www.ovirt.org/documentation/gluster-hyperconverged/ for this. Thanks.

2 1

[ANN] oVirt 4.2.8 Second Release Candidate is now available
by Sandro Bonazzola 11 Dec '18

11 Dec '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.8 Second Release Candidate, as of December 11th, 2018. This update is a release candidate of the eighth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node will be available soon due to build issues causing a delay [2] Additional Resources: * Read more about the oVirt 4.2.8 release highlights: http://www.ovirt.org/release/4.2.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.8/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Re: losing ib0 connection after activating host
by Douglas Duckworth 11 Dec '18

11 Dec '18

THANK YOU SO MUCH! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Tue, Dec 11, 2018 at 2:03 AM Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com>> wrote: On Mon, 10 Dec 2018 18:09:40 +0000 Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > Hi Dominik, > > I have added LACP bond network to all hosts and renamed the Hosted Engine using "/usr/share/ovirt-engine/setup/bin/ovirt-engine-rename." > > However, I am still missing the option to assign Migration and Management network roles to this new bond. > > Can you advise where I can find this option? > You cannot assign this role to the host interface directly, but to the network, which is assigned to the interface, in "Compute > Clusters > Clustername > Logical Networks > Manage Networks" > Thanks, > > Douglas Duckworth, MSc, LFCS > HPC System Administrator > Scientific Computing Unit<https://scu.med.cornell.edu> > Weill Cornell Medicine > 1300 York Avenue > New York, NY 10065 > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > O: 212-746-6305 > F: 212-746-8690 > > > On Fri, Aug 24, 2018 at 11:52 AM Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > On Fri, 24 Aug 2018 09:46:25 -0400 > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > Sorry, I mean "migration network" for moving live migration traffic. > > > > You have to create a new logical network in > "Network > Networks > New" > and assign this to ib0 in > "Compute > Hosts > hostname > Network Interfaces > Setup Host Networks". > After this you can assign a role to this network in > "Compute > Clusters > Clustername > Logical Networks > Manage Networks" > > > > FDR infiniband much faster than 1Gb network which currently acts as > > migration network, vm network, display network, mgmt network, etc. > > > > Thanks, > > > > Douglas Duckworth, MSc, LFCS > > HPC System Administrator > > Scientific Computing Unit > > Weill Cornell Medicine > > 1300 York - LC-502 > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > O: 212-746-6305 > > F: 212-746-8690 > > > > > > On Fri, Aug 24, 2018 at 9:36 AM, Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> > > wrote: > > > > > On Thu, 23 Aug 2018 13:51:39 -0400 > > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > > > > THANKS! > > > > > > > > ib0 now up with NFS storage back on this hypervisor > > > > > > > > > > Thanks for letting us know. > > > > > > > Though how do I make it a transfer network? I don't see an > > > > option. > > > > > > I do not understand the meaning of "transfer network". > > > The network interface to use for NFS results from the routing > > > tables of the host. > > > In "Compute > Clusters > Clustername > Logical Networks > Manage > > > Networks" network roles for some kind of loads can be assigned, but > > > not for NFS access. > > > > > > > > > > Thanks, > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > HPC System Administrator > > > > Scientific Computing Unit > > > > Weill Cornell Medicine > > > > 1300 York - LC-502 > > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > O: 212-746-6305 > > > > F: 212-746-8690 > > > > > > > > > > > > On Thu, Aug 23, 2018 at 11:12 AM, Douglas Duckworth > > > > <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>> > > > > > wrote: > > > > > > > > > Hi Dominik > > > > > > > > > > Yes, the network-script was created by our Ansible role that > > > > > deploys CentOS hosts. It pulls the IP from DNS then templates > > > > > the script and copies to host. > > > > > > > > > > I will try this oVirt step then see if it works! > > > > > > > > > > Thanks, > > > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > > HPC System Administrator > > > > > Scientific Computing Unit > > > > > Weill Cornell Medicine > > > > > 1300 York - LC-502 > > > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > > O: 212-746-6305 > > > > > F: 212-746-8690 > > > > > > > > > > > > > > > On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler > > > > > <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > > > > > > > > > >> Is ifcfg-ib0 created before adding the host? > > > > >> Can ib0 be reconfigured using engine, e.g. by > > > > >> "Compute > Hosts > hostx > Network Interfaces > Setup Host > > > > >> Networks"? If this some kind of self-hosted engine? > > > > >> > > > > >> On Thu, 23 Aug 2018 09:30:59 -0400 > > > > >> Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > >> > > > > >> > Here's a link to the files: > > > > >> > > > > > >> > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_ > > > > >> 2wjZ6Vo&d=DwICAg&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu > > > > >> 2s&r=2Fzhh_78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw&m=Y25- > > > > >> OOvgu58jlC82-fzBeNIpQ7ZscoHznffUhqE6EBM&s=QQXlC9Tisa60TvimyS > > > > >> 3BnFDCaDF7VPD8eCzT-Fke-p0&e= > > > > >> > > > > > >> > Thank you! > > > > >> > > > > > >> > Thanks, > > > > >> > > > > > >> > Douglas Duckworth, MSc, LFCS > > > > >> > HPC System Administrator > > > > >> > Scientific Computing Unit > > > > >> > Weill Cornell Medicine > > > > >> > 1300 York - LC-502 > > > > >> > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > >> > O: 212-746-6305 > > > > >> > F: 212-746-8690 > > > > >> > > > > > >> > > > > > >> > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler > > > > >> > <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > > > > >> > > > > > >> > > Would you please share the vdsm.log and the supervdsm.log > > > > >> > > from this host? > > > > >> > > > > > > >> > > On Wed, 22 Aug 2018 11:36:09 -0400 > > > > >> > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > >> > > > > > > >> > > > Hi > > > > >> > > > > > > > >> > > > I keep losing ib0 connection on hypervisor after adding > > > > >> > > > host to engine. This makes the host not really work > > > > >> > > > since NFS will be mounted over ib0. > > > > >> > > > > > > > >> > > > I don't really understand why this occurs. > > > > >> > > > > > > > >> > > > OS: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > > > >> > > > CentOS Linux release 7.5.1804 (Core) > > > > >> > > > > > > > >> > > > Here's the network script: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# > > > > >> > > > cat /etc/sysconfig/network-scripts/ifcfg-ib0 DEVICE=ib0 > > > > >> > > > BOOTPROTO=static > > > > >> > > > IPADDR=172.16.0.207 > > > > >> > > > NETMASK=255.255.255.0 > > > > >> > > > ONBOOT=yes > > > > >> > > > ZONE=public > > > > >> > > > > > > > >> > > > When I try "ifup" > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# ifup ib0 > > > > >> > > > Error: Connection activation failed: No suitable device > > > > >> > > > found for this connection. > > > > >> > > > > > > > >> > > > The error in syslog: > > > > >> > > > > > > > >> > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source > > > > >> > > > 172.16.0.87 from 172.16.0.49, on dev ib0 > > > > >> > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > > > >> > > > [1534951913.7486] audit: op="connection-activate" > > > > >> > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System > > > > >> > > > ib0" result="fail" reason="No suitable device found for > > > > >> > > > this connection. > > > > >> > > > > > > > >> > > > As you can see media state up: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# ip a > > > > >> > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue > > > > >> > > > state UNKNOWN group default qlen 1000 > > > > >> > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > > >> > > > inet 127.0.0.1/8<http://127.0.0.1/8><https://urldefense.proofpoint.com/v2/url?u=http-3A__127.0.0.1_8&d=DwICAg&c=…> scope host lo > > > > >> > > > valid_lft forever preferred_lft forever > > > > >> > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > > >> > > > mq master ovirtmgmt state UP group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > > > >> > > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 > > > > >> > > > qdisc pfifo_fast state UNKNOWN group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > > > >> > > > inet 169.254.0.2/16<http://169.254.0.2/16><https://urldefense.proofpoint.com/v2/url?u=http-3A__169.254.0.2_16&d=DwICAg…> brd 169.254.255.255 scope global > > > > >> > > > idrac valid_lft forever preferred_lft forever > > > > >> > > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc > > > > >> > > > mq state UP group default qlen 256 > > > > >> > > > link/infiniband > > > > >> > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 > > > > >> > > > brd > > > > >> > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > > > >> > > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > > > > >> > > > state DOWN group default qlen 1000 link/ether > > > > >> > > > 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff 9: br-int: > > > > >> > > > <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > > > >> > > > group default qlen 1000 link/ether 3e:32:e6:66:98:49 brd > > > > >> > > > ff:ff:ff:ff:ff:ff 25: ovirtmgmt: > > > > >> > > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > > > > >> > > > state UP group default qlen 1000 link/ether > > > > >> > > > 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff inet > > > > >> > > > 10.0.0.183/16<http://10.0.0.183/16><https://urldefense.proofpoint.com/v2/url?u=http-3A__10.0.0.183_16&d=DwICAg&…> brd 10.0.255.255 scope global ovirtmgmt > > > > >> > > > valid_lft forever preferred_lft forever 26: > > > > >> > > > genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu > > > > >> > > > 65000 qdisc noqueue master ovs-system state UNKNOWN > > > > >> > > > group default qlen 1000 link/ether aa:32:82:1b:01:d9 brd > > > > >> > > > ff:ff:ff:ff:ff:ff 27: ;vdsmdummy;: <BROADCAST,MULTICAST> > > > > >> > > > mtu 1500 qdisc noop state DOWN group default qlen 1000 > > > > >> > > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > > > >> > > > > > > > >> > > > The card is FDR: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > > > >> > > > 01:00.0 Network controller: Mellanox Technologies MT27500 > > > > >> > > > Family [ConnectX-3] > > > > >> > > > Subsystem: Mellanox Technologies Device 0051 > > > > >> > > > > > > > >> > > > Latest OFED driver: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > > > >> > > > > > > > >> > > > HCA driver loaded > > > > >> > > > > > > > >> > > > Configured IPoIB devices: > > > > >> > > > ib0 > > > > >> > > > > > > > >> > > > Currently active IPoIB devices: > > > > >> > > > ib0 > > > > >> > > > Configured Mellanox EN devices: > > > > >> > > > > > > > >> > > > Currently active Mellanox devices: > > > > >> > > > ib0 > > > > >> > > > > > > > >> > > > The following OFED modules are loaded: > > > > >> > > > > > > > >> > > > rdma_ucm > > > > >> > > > rdma_cm > > > > >> > > > ib_ipoib > > > > >> > > > mlx4_core > > > > >> > > > mlx4_ib > > > > >> > > > mlx4_en > > > > >> > > > mlx5_core > > > > >> > > > mlx5_ib > > > > >> > > > ib_uverbs > > > > >> > > > ib_umad > > > > >> > > > ib_ucm > > > > >> > > > ib_cm > > > > >> > > > ib_core > > > > >> > > > mlxfw > > > > >> > > > mlx5_fpga_tools > > > > >> > > > > > > > >> > > > I can add an IP to ib0 using "ip addr" though I need > > > > >> > > > Network Manager to work with ib0. > > > > >> > > > > > > > >> > > > > > > > >> > > > Thanks, > > > > >> > > > > > > > >> > > > Douglas Duckworth, MSc, LFCS > > > > >> > > > HPC System Administrator > > > > >> > > > Scientific Computing Unit > > > > >> > > > Weill Cornell Medicine > > > > >> > > > 1300 York - LC-502 > > > > >> > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > >> > > > O: 212-746-6305 > > > > >> > > > F: 212-746-8690 > > > > >> > > > > > > >> > > > > > > >> > > > > >> > > > > > > > > > > > >

1 0