- Users - oVirt List Archives

RDP as default console for Windows VM
by Anantha Raghava 14 Nov '18

14 Nov '18

Hi, In the past, we could set RDP as default console for Windows VM. VMs used to reboot once we set RDP under console options & become default for all users. In the new versions I am unable to achieve the same result. Is there a way to set RDP as default Console for Windows VM? -- Thanks & Regards, Anantha Raghava eXzaTech Consulting And Services Pvt. Ltd. Ph: +91-9538849179, E-mail: raghav(a)exzatechconsulting.com <mailto:raghav@exzatechconsulting.com> URL: http://www.exzatechconsulting.com <http://www.exzatechconsulting.com/> Dell Technology Partner, 3CX - Open Software IP PBX Partner, RedHat Solutions Partner Open Source Software Solutions - oVirt, SMARTDesktop, Apache Metron, OpenVPN, OPNSense...... DISCLAIMER: This e-mail communication and any attachments may be privileged and confidential to eXzatech Consulting And Services Pvt. Ltd., Bangalore, and are intended only for the use of the recipients named above If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions. Do not print this e-mail unless required. Save Paper & trees.

1 0

what the sequence of shutdown in Cluster enviroment
by max zhang 14 Nov '18

14 Nov '18

Hi man,There is always a doubt what the sequence of shutdown in Cluster enviroment. The enviroment like as: engine.host.com node.host1.com node.host2.com FCSAN host1 and host2 are in the same cluster. By the way,after I shutdown all the host,what the sequence of start in Cluster enviroment. Best regards.

3 4

Ovirt VDI
by Hari Prasanth Loganathan 14 Nov '18

14 Nov '18

Hi Team, I created a VM which has one disk. For this VM, I created two Virtual Desktop (VDI_1 and VDI_2) using open-UDS and it created successfully. *Consider the following scenario* : 1) I took a console for VDI_1 and created a file in it using the console 2) I took the console for VDI_2 and checked whether the file created in VDI_1 is available in it but as per the VDI concept it is not available Could someone clarify the below use case, Now when I looked at the Disk associated with the VDI, It seems the Disk of the VM is same for the VDI_1 and VDI_2, so How does the file created in VDI_1 is not reflecting in VDI_2? Thanks, Hari -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

3 3

[ANN] oVirt 4.2.7 async update is now available
by Sandro Bonazzola 14 Nov '18

14 Nov '18

The oVirt Team has just released a new version of the following packages: - ovirt-engine - ovirt-hosted-engine-setup - ovirt-release42 Corresponding oVirt Node is being built and will be released tomorrow. The async release addresses the following bugs: - Bug 1647032 - Update gluster volume options set on the volume - Bug 1645757 - VMs running on the deployed host are removed from the engine after backup/restore - Bug 1620314 - SHE disaster recovery is broken in new 4.2 deployments as hosted_storage is master - Bug 1568841 - Can't restore hosted-engine backup at deployment The following enhancements are also included: - Bug 1469908 - [RFE] Support managed/automated restore - Bug 1406067 - [RFE] have the option to install hosted engine on specific datacenter and cluster. Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

2 2

Manage external KVMs
by markus.schaufler＠digit-all.at 14 Nov '18

14 Nov '18

Hi! Is there a way to manage several external standalone KVM's with oVirt? So to say - import the KVM Hosts (not the VM's). regards, Markus

3 2

Ovirt Python - SDK
by Hari Prasanth Loganathan 14 Nov '18

14 Nov '18

Hi Team, I get the following error, How to rectify this issue? from ovirtsdk.xml import params ImportError: No module named ovirtsdk.xml *This is the complete log file, Why I get this error and How to rectify it?* python manage.py createcachetableTraceback (most recent call last): File "manage.py", line 9, in <module> execute_from_command_line(sys.argv) File "/home/hari/openuds/testuds-master/Python-2.7.14/env/lib/python2.7/site-packages/django/core/management/__init__.py", line 353, in execute_from_command_line utility.execute() File "/home/hari/openuds/testuds-master/Python-2.7.14/env/lib/python2.7/site-packages/django/core/management/__init__.py", line 327, in execute django.setup() File "/home/hari/openuds/testuds-master/Python-2.7.14/env/lib/python2.7/site-packages/django/__init__.py", line 18, in setup apps.populate(settings.INSTALLED_APPS) File "/home/hari/openuds/testuds-master/Python-2.7.14/env/lib/python2.7/site-packages/django/apps/registry.py", line 115, in populate app_config.ready() File "/home/hari/openuds/testuds-master/server/src/uds/__init__.py", line 72, in ready from . import services # to make sure that the packages are initialized at this point File "/home/hari/openuds/testuds-master/server/src/uds/services/__init__.py", line 73, in <module> __init__() File "/home/hari/openuds/testuds-master/server/src/uds/services/__init__.py", line 63, in __init__ __import__('uds.services.' + name, globals(), locals(), []) File "/home/hari/openuds/testuds-master/server/src/uds/services/OVirt/__init__.py", line 31, in <module> from .OVirtProvider import Provider File "/home/hari/openuds/testuds-master/server/src/uds/services/OVirt/OVirtProvider.py", line 44, in <module> from . import client File "/home/hari/openuds/testuds-master/server/src/uds/services/OVirt/client/__init__.py", line 33, in <module> from . import oVirtClient3; File "/home/hari/openuds/testuds-master/server/src/uds/services/OVirt/client/oVirtClient3.py", line 7, in <module> from ovirtsdk.xml import params *ImportError: No module named ovirtsdk.xml* *Thanks,* *Hari * -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

2 1

Memory usage is inaccurate on ovirt web manager.
by patrickstar12358＠hotmail.com 14 Nov '18

14 Nov '18

Hi buddy,I encoutered a issue: Enviroment:ovirt 3.5,node2+node3+engine,node2 and node3 are in the same cluster. node2:64GB memory node3:64GB memory If I try to start 25 VMs on node2,node2's Memory usage is almost up to 80% But if I start 25 VMs on node3,node3's Memory usage is normal,about 70% VMs are all the same. And I checked out "Hosts>General". on node2: Physical Memory:64301 MB total, 49512 MB used, 14789 MB free Swap Size:28567 MB total, -858090 MB used, 886657 MB free Shared Memory:57% Max free Memory for scheduling new VMs:24191 MB Memory Page Sharing:Active on node3: Physical Memory:64301 MB total, 37938 MB used, 26363 MB free Swap Size:28567 MB total, 161 MB used, 28406 MB free Shared Memory:98% Max free Memory for scheduling new VMs:24191 MB Memory Page Sharing:Active Best regard

3 2

Can I Move a Fiber Channel Domain between different environments?
by Jacob Green 13 Nov '18

13 Nov '18

We have two Ovirt environments, our existing environment is Ovirt 4.1 And we want to migrate to our 4.2 environment, we chose this path because upgrading had a lot of issues for us, also we are migrating our cluster environment to a new IP scheme. So this made the most sense to us. The question we have now is can we simply move an existing Fiber Channel domain from our Ovirt 4.1 environment to our 4.2 environment. I see information here that suggests we can, https://ovirt.org/documentation/admin-guide/chap-Storage/ however there is information further down in the document that seems conflicting or I am confused, I am willing to accept that. *Near the top of the page I linked it says the following* "Note:The export storage domain is deprecated. Storage data domains can be unattached from a data center and imported to another data center in the same environment, or in a different environment. Virtual machines, floating virtual disk images, and templates can then be uploaded from the imported storage domain to the attached data center. SeeImporting Existing Storage Domains <https://ovirt.org/documentation/admin-guide/chap-Storage/sect-Importing_Exi…>for information on importing storage domains." **Ok cool so I should be able to import the storage domain into a new environment? According to that information it would seem so.* * *However further down it says the following,* "Reusing LUNs LUNs cannot be reused, as is, to create a storage domain or virtual disk. If you try to reuse the LUNs, the Administration Portal displays the following error message:" So I do not want to make a mistake, and remove my storage domain from my original ovirt environment just to find I cannot re add it to the new ovirt environment, and if I do that will I be able to import the VMs? Thank you for any guidance on this topic, It would be much appreciated. I guess the TLDR would be is the part pasted below of the linked documentation accurate for fiber channel? "Data Importing an existing data storage domain allows you to access all of the virtual machines and templates that the data storage domain contains. After you import the storage domain, you must manually import virtual machines, floating disk images, and templates into the destination data center. The process for importing the virtual machines and templates that a data storage domain contains is similar to that for an export storage domain. However, because data storage domains contain all the virtual machines and templates in a given data center, importing data storage domains is recommended for data recovery or large-scale migration of virtual machines between data centers or environments. Important: You can import existing data storage domains that were attached to data centers with a compatibility level of 3.5 or higher." Please forgive my confusion. -- Jacob Green Systems Admin American Alloy Steel 713-300-5690

1 0

Re: Ovirt Python - SDK
by Hari Prasanth Loganathan 13 Nov '18

13 Nov '18

Hi Brad, ovirt-engine-sdk-python 4.2.9 It is running in the non-ovirt environment. No Ovirt Packages are installed in this. Thanks, Hari On Tue, 13 Nov 2018 at 2:50 AM, Brad Riemann <Brad.Riemann(a)cloud5.com> wrote: > What version of the sdk are you using? Are you running this on an > non-ovirt server/workstation? Can you list out the packages installed for * > *ovirt** ? > > > > Brad Riemann > > Sr. System Architect > > Cloud5 Communications > > Brad.Riemann(a)Cloud5.com > -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

2 3

updating Spacewalk registered Enterprise hosts to 4.2.7
by Matthias Leopold 13 Nov '18

13 Nov '18

Hi, just for the records: I couldn't update my Spacewalk (2.6) registered Enterprise (CentOS) hosts from oVirt 4.2.6 to 4.2.7. Error message is 2018-11-05 15:03:51,059 p=2329 u=ovirt | Using /usr/share/ovirt-engine/playbooks/ansible.cfg as config file 2018-11-05 15:03:52,152 passlib.registry registered 'md5_crypt' handler: <class 'passlib.handlers.md5_crypt.md5_crypt'> 2018-11-05 15:03:52,165 p=2329 u=ovirt | PLAY [all] ********************************************************************* 2018-11-05 15:03:52,184 p=2329 u=ovirt | TASK [ovirt-host-upgrade : Install ovirt-host package if it isn't installed] *** 2018-11-05 15:04:00,078 p=2329 u=ovirt | fatal: [foo.bar.meduniwien.ac.at]: FAILED! => { "ansible_facts": { "pkg_mgr": "yum" }, "changed": false } MSG: Error from repoquery: ['/usr/bin/repoquery', '--show-duplicates', '--plugins', '--quiet', '-c', None, '--disablerepo', '', '--enablerepo', '', '--qf', '%{epoch}:%{name}-%{version}-%{release}.%{arch}', 'ovirt-host']: Error accessing file for config file:///root/--disablerepo Error accessing file for config file:///root/--disablerepo Since this is only a test environment and i could easily switch the hosts to upstream repo mirrors I didn't do any further debugging. Maybe the Spacewalk server is too old... Matthias

2 2