- Users - oVirt List Archives

ovirt - in docker
by ReSearchIT Eng 19 Oct '18

19 Oct '18

Hello! I am interested to run ovirt in docker container. It was noticed that there is an official repo for it: https://github.com/oVirt/ovirt-container-engine Unfortunately it did not get an update for 2 years (4.1). Can anyone help with the required answers/entrypoint/patch files for the new 4.2 ? Thanks!

7 16

Node, failed to deploy hosted engine
by s.danzi＠hawai.it 19 Oct '18

19 Oct '18

Hello! I'm setting up a new oVirt cluster. I've 3 hosts with node. I setup gluster storace using node wizard. All ok. I can't set up hosted engine. I have two ERROR, but I can't find a detailed log. On node I have a VM running in local temp storage but not accessible. [ INFO ] TASK [Wait for the host to be up] [ INFO ] ok: [localhost] [ INFO ] TASK [Check host status] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, please check engine logs, fix accordingly and re-deploy.\n"} [ INFO ] TASK [Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [Copy engine logs] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"}

2 2

aquantia 107 (10Gbase-T NIC) driver for oVirt node-ng?
by Edward Berger 19 Oct '18

19 Oct '18

I'm not sure where to send a request for including the current Aquantia 107 (10GbaseT nic) driver to be included in the ovirt-node-ng image. I don't see a centos RPM for kmod-redhat-atlantic, apparently there's a scientific linux rpm available for download.

2 1

Re: Self-Hosted engine deploy fails but hosted-engine --vm-status shows engine in good health
by Sam McLeod 18 Oct '18

18 Oct '18

Did you get anywhere with this? I'm having quite a similar issue with ovirt 4.2 on CentOS 7: Deployment output: https://paste.fedoraproject.org/paste/j8G7EVHBoW4JK7orp-mD8A <https://paste.fedoraproject.org/paste/j8G7EVHBoW4JK7orp-mD8A> SQL errors: https://paste.fedoraproject.org/paste/tYNtxsVHMCETwWBMuM2wyg <https://paste.fedoraproject.org/paste/tYNtxsVHMCETwWBMuM2wyg>

1 0

Storage domain has corrupt data
by Chris Burckhard 18 Oct '18

18 Oct '18

We have an iscsi storage domain that has corrupt data. The os boots to the login screen, but does not accept the password, so ovirt cannot connect to it. We are able to boot to a centos live usb and mount the root partitions to see that data, but that doesn't really help since it has iscsi targets. We are seeing errors such as this: ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVGInfoVDSCommand] (org.ovirt.thread.pool-6-thread-21) [3fb88fb0] Command 'GetVGInfoVDSCommand(HostName = 0103ITVH084, GetVGInfoVDSCommandParameters:{runAsync='true', hostId='aaf63dd3-d8b9-4cc2-8ca7-977fbb1ea18a', VGID='sxpvjb-cdco-NyZ9-ReKL-WQdw-WGxG-qNjVCp'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVGInfoVDS, error = Volume Group does not exist: (u'vg_uuid: sxpvjb-cdco-NyZ9-ReKL-WQdw-WGxG-qNjVCp',), code = 506 Which seems to me that since it is on the live cd, the uuid changed. Is there any way to get the storage domain back online using something like a Centos Live USB? Thank you,

2 1

Lost access to Engine VM "The hosted engine has not been deployed"
by jataiy.target＠gmail.com 18 Oct '18

18 Oct '18

For no specific reason, I lost access to Engine VM. when I run "$ hosted-engine --check-deployed" I get "The hosted engine has not been deployed" even though Cockpit Hosted Engine Setup page says "This system is already registered to ..." I have 3 node hyperconverged setup.

2 2

Cannot create VMs
by Albl, Oliver 18 Oct '18

18 Oct '18

0 *H÷ 010 `He

1 2

Local disk RAID best practices (HW vs SW RAID)
by Vinícius Ferrão 18 Oct '18

18 Oct '18

Hello, I’m RAIDing the local hypervisor disks. I’m aware that in some scenarios this isn’t even needed. But I would like to know which is the best practice in this scenario: Hardware RAID from a cheap Dell H330 controller, or just leave the controller in HBA mode and make a software RAID during install of the Hypervisor? Thanks, Sent from my iPhone

2 1

Is it possible to start a setup of oVirt-Gluster Hyperconverged infrastructure with six nodes ?
by Ravi Linux 18 Oct '18

18 Oct '18

Let's try this question again since my last thread devolved into someone else's question that had nothing to do with this topic. Is there are way to setup a new oVirt-Gluster Hyperconverged infrastructure with six nodes ? All the docs I see start with a 3-node cluster and then adding one node at a time. Is it possible to start with a six node cluster from scratch and use the storage space from all six nodes with Gluster? Six nodes, each contributing 2 TB of disk space. How much shared space will be available ? Thanks in advance for any help on this question. ravi

2 2

[ANN] oVirt 4.2.7 Third Release Candidate is now available
by Lev Veyde 18 Oct '18

18 Oct '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.7 Third Release Candidate, as of October 18th, 2018. This update is a release candidate of the seventh in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.7 release highlights: http://www.ovirt.org/release/4.2.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.7/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0