- Users - oVirt List Archives

VM has been paused due to unknown storage error. - Only on NFS / EMC
by jeanbaptiste＠nfrance.com 24 Aug '18

24 Aug '18

Hello, I'm facing a strange issue on my OVirt Dev pool. Indeed, when I create high disk load a VM (kickstart installation or iozone test for example) , VM is paused due to storage I/O error. Problem is 100% reproducible, and is located only on NFS (v3 and v4) on my EMC VNXe3200 NAS's (I have a 10TB and a 20TB NAS) I have done test (simple iozone -a) with VM 1 vCPU / 2GB RAM and 2 disk (1*20GB + 1*10GB). Both VMs disk are placed into the same SAN / NAS for each test. Results are: - EMC VNXe3200 (10TB) NFSv3 => VM stopped after 10- 30s iozone lauch - EMC VNXe3200 (20TB) NFSv3 => VM stopped after 10- 30s iozone lauch - EMC VNXe3200 (10TB) ISCSI => No problem, iozone test finish, and performance are "standard" regarding load of the VNXe (60MB/s sequential Write for info) - EMC VNXe3200 (20TB) ISCSI=> No problem, iozone test finish, and performance are "standard"regarding load of the VNXe (40-60MB/S sequential Write for info) - NETAPP FAS2240 NFSv3 => No problem, iozone test finish, and performance are good (100MB/s sequential Write for info) - Freebsd10 NAS NFSv3 => No problem, iozone test finish, and performance are good regarding NAS conf (80MB/s sequential Write for info) I can't explain why I have an issue on NFS and I have not issue on ISCSI (on the same EMC VNxe3200...). NFS default params are keeped when storage added to datacenter:(rw,relatime,vers=4.0,rsize=131072,wsize=131072,namlen=255,soft,nosharecache,proto=tcp,port=0,timeo=600,retrans=6,sec=sys,clientaddr=XXXXXXX,local_lock=none,addr=XXXXXX) (rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=XXXXXX,mountvers=3,mountport=1234,mountproto=udp,local_lock=all,addr=XXXXXX) Debug logs on host does not help me a lot: 2018-08-22 15:36:13,883+0200 INFO (periodic/22) [vdsm.api] START multipath_health() from=internal, task_id=53da2eca-eb66-400c-8367-ab62cedc5dc1 (api:46) 2018-08-22 15:36:13,883+0200 INFO (periodic/22) [vdsm.api] FINISH multipath_health return={} from=internal, task_id=53da2eca-eb66-400c-8367-ab62cedc5dc1 (api:52) 2018-08-22 15:36:15,161+0200 INFO (libvirt/events) [virt.vm] (vmId='b139a9b9-16bc-40ee-ba84-d1d59e5ce17a') abnormal vm stop device ua-179375b0-0a18-4fcb-a884-4aeb1c 8fed97 error eother (vm:5116) 2018-08-22 15:36:15,161+0200 INFO (libvirt/events) [virt.vm] (vmId='b139a9b9-16bc-40ee-ba84-d1d59e5ce17a') CPU stopped: onIOError (vm:6157) 2018-08-22 15:36:15,162+0200 DEBUG (libvirt/events) [virt.metadata.Descriptor] values: {'minGuaranteedMemoryMb': 1024, 'clusterVersion': '4.2', 'resumeBehavior': 'au to_resume', 'memGuaranteedSize': 1024, 'launchPaused': 'false', 'startTime': 1534944832.058459, 'destroy_on_reboot': False, 'pauseTime': 4999289.49} (metadata:596) 2018-08-22 15:36:15,162+0200 DEBUG (libvirt/events) [virt.metadata.Descriptor] values updated: {'minGuaranteedMemoryMb': 1024, 'clusterVersion': '4.2', 'resumeBehavi or': 'auto_resume', 'memGuaranteedSize': 1024, 'launchPaused': 'false', 'startTime': 1534944832.058459, 'destroy_on_reboot': False, 'pauseTime': 4999289.49} (metadat a:601) 2018-08-22 15:36:15,168+0200 DEBUG (libvirt/events) [virt.metadata.Descriptor] dumped metadata for b139a9b9-16bc-40ee-ba84-d1d59e5ce17a: <?xml version='1.0' encoding metadata blablablabla............................> 2018-08-22 15:36:15,169+0200 DEBUG (libvirt/events) [virt.vm] (vmId='b139a9b9-16bc-40ee-ba84-d1d59e5ce17a') event Suspended detail 2 opaque None (vm:5520) 2018-08-22 15:36:15,169+0200 INFO (libvirt/events) [virt.vm] (vmId='b139a9b9-16bc-40ee-ba84-d1d59e5ce17a') CPU stopped: onSuspend (vm:6157) 2018-08-22 15:36:15,174+0200 WARN (libvirt/events) [virt.vm] (vmId='b139a9b9-16bc-40ee-ba84-d1d59e5ce17a') device sda reported I/O error (vm:4065) 2018-08-22 15:36:15,340+0200 DEBUG (vmchannels) [virt.vm] (vmId='46d496af-e2d0-4caa-9a13-10c624f265d8') Guest's message heartbeat: {u'memory-stat': {u'swap_out': 0, u'majflt': 0, u'swap_usage': 0, u'mem_cached': 119020, u'mem_free': 3693900, u'mem_buffers': 2108, u'swap_in': 0, u'swap_total': 8257532, u'pageflt': 141, u'mem_tota l': 3878980, u'mem_unused': 3572772}, u'free-ram': u'3607', u'apiVersion': 3} (guestagent:337) Do you have some idea ?

2 2

oVirt: powerful opensource virtualization
by Sandro Bonazzola 24 Aug '18

24 Aug '18

Hi, just to let you know that Simone Tiraboschi will present "oVirt: powerful opensource virtualization" in Bergamo (Italy) on September 8th 2018 within Download Innovation IT & Conference event (https://download-event.io/en/) -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

3 2

Update disk alias by using ovirtsdk4
by branimirp＠gmail.com 24 Aug '18

24 Aug '18

Hello list! I have been trying to rename a disk alias that defaults to "some_template_name-Disk1" to something more logical by using ovirtsdk4 (in my example to "vm2_disk_0"). On the list itself, I saw a couple of examples for older version of SDK. Basically, I am trying to create a VM and then update its properties, notably "alias" attribute that can be found in types.Disk. The first portion of the code works well (vm provisioning), but second one (alias update) does not, causing the TypeError exception. Obviously, I am doing something wrong here. I have spent most of the time trying to figure out how to actually do this. I would kindly ask for some hint. Thank you in advance! Regards, Branimir ******************************* # create a vm vms_service = connection.system_service().vms_service() vms_service.add( types.Vm( # --- vm name name='vm2', # --- vCpus cpu=types.Cpu( topology=types.CpuTopology(cores=2, sockets=1) ), # --- memory memory = 512*1024*1024, # -- oVirt cluster cluster = types.Cluster( name='cluster_1', ), # -- template to use template = types.Template( name='centos7-tmplt-compute-node-v1'), # -- boot device os = types.OperatingSystem(boot=types.Boot(devices=[types.BootDevice.HD])), ), ) # update the vm in terms of disk name vm = vms_service.list(search='name=vm2')[0] vm_service = vms_service.vm_service(vm.id) updated_vm = vm_service.update( types.Vm( disk_attachment = types.Disk(alias='vm2_disk_0') ) )

2 2

Upgrading librbd1 and librados2 for oVirt 4.2.x
by Andreas Elvers 23 Aug '18

23 Aug '18

Hello, I am in need of upgrading librbd1 and librados2 for a oVirt 4.2.x cluster. The cluster was installed via node ng. Taking the repository for Ceph Mimic or Luminous will end with a dependency problem because liburcu-cds.so.1 is already installed as a more recent version. A hint on how to get a more recent versions of the above libraries would be very much appreciated. Thanks, - Andreas

1 0

Re: losing ib0 connection after activating host
by Douglas Duckworth 23 Aug '18

23 Aug '18

Here's a link to the files: https://bit.ly/2wjZ6Vo Thank you! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine 1300 York - LC-502 E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler <dholler(a)redhat.com> wrote: > Would you please share the vdsm.log and the supervdsm.log from this > host? > > On Wed, 22 Aug 2018 11:36:09 -0400 > Douglas Duckworth <dod2014(a)med.cornell.edu> wrote: > > > Hi > > > > I keep losing ib0 connection on hypervisor after adding host to > > engine. This makes the host not really work since NFS will be mounted > > over ib0. > > > > I don't really understand why this occurs. > > > > OS: > > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > CentOS Linux release 7.5.1804 (Core) > > > > Here's the network script: > > > > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0 > > DEVICE=ib0 > > BOOTPROTO=static > > IPADDR=172.16.0.207 > > NETMASK=255.255.255.0 > > ONBOOT=yes > > ZONE=public > > > > When I try "ifup" > > > > [root@ovirt-hv2 ~]# ifup ib0 > > Error: Connection activation failed: No suitable device found for this > > connection. > > > > The error in syslog: > > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87 > > from 172.16.0.49, on dev ib0 > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > [1534951913.7486] audit: op="connection-activate" > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0" > > result="fail" reason="No suitable device found for this connection. > > > > As you can see media state up: > > > > [root@ovirt-hv2 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > > group default qlen 1000 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master > > ovirtmgmt state UP group default qlen 1000 > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > > DOWN group default qlen 1000 > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > > DOWN group default qlen 1000 > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > > DOWN group default qlen 1000 > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > > state UNKNOWN group default qlen 1000 > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac > > valid_lft forever preferred_lft forever > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP > > group default qlen 256 > > link/infiniband > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > group default qlen 1000 > > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff > > 9: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group > > default qlen 1000 > > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff > > 25: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > noqueue state UP group default qlen 1000 > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt > > valid_lft forever preferred_lft forever > > 26: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc > > noqueue master ovs-system state UNKNOWN group default qlen 1000 > > link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff > > 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > group default qlen 1000 > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > > > The card is FDR: > > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > 01:00.0 Network controller: Mellanox Technologies MT27500 Family > > [ConnectX-3] > > Subsystem: Mellanox Technologies Device 0051 > > > > Latest OFED driver: > > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > > > HCA driver loaded > > > > Configured IPoIB devices: > > ib0 > > > > Currently active IPoIB devices: > > ib0 > > Configured Mellanox EN devices: > > > > Currently active Mellanox devices: > > ib0 > > > > The following OFED modules are loaded: > > > > rdma_ucm > > rdma_cm > > ib_ipoib > > mlx4_core > > mlx4_ib > > mlx4_en > > mlx5_core > > mlx5_ib > > ib_uverbs > > ib_umad > > ib_ucm > > ib_cm > > ib_core > > mlxfw > > mlx5_fpga_tools > > > > I can add an IP to ib0 using "ip addr" though I need Network Manager > > to work with ib0. > > > > > > Thanks, > > > > Douglas Duckworth, MSc, LFCS > > HPC System Administrator > > Scientific Computing Unit > > Weill Cornell Medicine > > 1300 York - LC-502 > > E: doug(a)med.cornell.edu > > O: 212-746-6305 > > F: 212-746-8690 > >

2 1

Data Center non-responsive, storage not loading, and psql errors after importing an ova
by josh＠nightscapetech.com 23 Aug '18

23 Aug '18

I posted about this a few months ago on Reddit when it happened the first time, and I have now repeated it on two more separate installations. I have a simple oVirt 4.2 hosted-engine setup, two hosts, with a qnap NAS as the shared NFS storage. I copied an ova file (exported from vmware) to the NFS storage. I then imported it by logging into the engine gui, going to "Virtual machines", selecting the host/file path/datacenter/etc, and starting the import. Once I started the import, I get an alert that it failed almost immediately, followed by a notice that the data center is in a non-responsive state. Clicking on the "storage" tab under Data Center, or going to the "Storage Domain" page directly yields the three ". . ." loading animation, which never ends. I can still see the storage mounts on the hosts, and I can move files to and from them. the engine.log file on the hosted-engine VM contains a lot of the following lines: Caused by: org.springframework.dao.DataIntegrityViolationException: PreparedStatementCallback; SQL [select * from getstorage_domains_list_by_imageid (?)]; ERROR: integer out of range Where: PL/pgSQL function getstorage_domains_list_by_imageid(uuid) line 3 at RETURN QUERY; nested exception is org.postgresql.util.PSQLException: ER ROR: integer out of range Where: PL/pgSQL function getstorage_domains_list_by_imageid(uuid) line 3 at RETURN QUERY at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator.doTranslate(SQLStateSQLExceptionTranslator.java:102) [spring-jdbc.jar:4.3. 9.RELEASE] What I have tried: Restarting the hosted-engine service Restarting nfs and vdsm services Rebooting the hosted-engine Rebooting both hosts Entering an exiting maintenance mode (one host never came out of maintenance, and refuses to with the error " General command validation failure ") Any idea what might have happened? And what should I have done to try to rectify it? Entering maintenance mode and restarting services seems to have made things much worse.

3 3

losing ib0 connection after activating host
by Douglas Duckworth 23 Aug '18

23 Aug '18

Hi I keep losing ib0 connection on hypervisor after adding host to engine. This makes the host not really work since NFS will be mounted over ib0. I don't really understand why this occurs. OS: [root@ovirt-hv2 ~]# cat /etc/redhat-release CentOS Linux release 7.5.1804 (Core) Here's the network script: [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0 DEVICE=ib0 BOOTPROTO=static IPADDR=172.16.0.207 NETMASK=255.255.255.0 ONBOOT=yes ZONE=public When I try "ifup" [root@ovirt-hv2 ~]# ifup ib0 Error: Connection activation failed: No suitable device found for this connection. The error in syslog: Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87 from 172.16.0.49, on dev ib0 Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> [1534951913.7486] audit: op="connection-activate" uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0" result="fail" reason="No suitable device found for this connection. As you can see media state up: [root@ovirt-hv2 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovirtmgmt state UP group default qlen 1000 link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac valid_lft forever preferred_lft forever 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP group default qlen 256 link/infiniband a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff 9: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff 25: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt valid_lft forever preferred_lft forever 26: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc noqueue master ovs-system state UNKNOWN group default qlen 1000 link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff The card is FDR: [root@ovirt-hv2 ~]# lspci -v | grep Mellanox 01:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3] Subsystem: Mellanox Technologies Device 0051 Latest OFED driver: [root@ovirt-hv2 ~]# /etc/init.d/openibd status HCA driver loaded Configured IPoIB devices: ib0 Currently active IPoIB devices: ib0 Configured Mellanox EN devices: Currently active Mellanox devices: ib0 The following OFED modules are loaded: rdma_ucm rdma_cm ib_ipoib mlx4_core mlx4_ib mlx4_en mlx5_core mlx5_ib ib_uverbs ib_umad ib_ucm ib_cm ib_core mlxfw mlx5_fpga_tools I can add an IP to ib0 using "ip addr" though I need Network Manager to work with ib0. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine 1300 York - LC-502 E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690

2 1

ovirt-node-ng-image-update 4.2.4 to 4.2.5.1 fails
by Glenn Farmer 23 Aug '18

23 Aug '18

yum update ends with: warning: %post(ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch) scriptlet failed, exit status 1 Non-fatal POSTIN scriptlet failure in rpm package ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch It creates the layers: ovirt-node-ng-4.2.5.1-0.20180731.0 onn Vri---tz-k 6.00g pool00 ovirt-node-ng-4.2.5.1-0.20180731.0+1 onn Vwi-a-tz-- 6.00g pool00 ovirt-node-ng-4.2.5.1-0.20180731.0 But no grub2 boot entry. nodectl info: layers: ovirt-node-ng-4.2.4-0.20180626.0: ovirt-node-ng-4.2.4-0.20180626.0+1 ovirt-node-ng-4.2.5.1-0.20180731.0: ovirt-node-ng-4.2.5.1-0.20180731.0+1 ovirt-node-ng-4.2.2-0.20180405.0: ovirt-node-ng-4.2.2-0.20180405.0+1 bootloader: default: ovirt-node-ng-4.2.4-0.20180626.0+1 entries: ovirt-node-ng-4.2.2-0.20180405.0+1: index: 1 title: ovirt-node-ng-4.2.2-0.20180405.0+1 kernel: /boot/ovirt-node-ng-4.2.2-0.20180405.0+1/vmlinuz-3.10.0-693.21.1.el7.x86_64 args: "ro crashkernel=auto rd.lvm.lv=onn/ovirt-node-ng-4.2.2-0.20180405.0+1 img.bootid=ovirt-node-ng-4.2.2-0.20180405.0+1" initrd: /boot/ovirt-node-ng-4.2.2-0.20180405.0+1/initramfs-3.10.0-693.21.1.el7.x86_64.img root: /dev/onn/ovirt-node-ng-4.2.2-0.20180405.0+1 ovirt-node-ng-4.2.4-0.20180626.0+1: index: 0 title: ovirt-node-ng-4.2.4-0.20180626.0+1 kernel: /boot/ovirt-node-ng-4.2.4-0.20180626.0+1/vmlinuz-3.10.0-862.3.3.el7.x86_64 args: "ro crashkernel=auto rd.lvm.lv=onn/ovirt-node-ng-4.2.4-0.20180626.0+1 img.bootid=ovirt-node-ng-4.2.4-0.20180626.0+1" initrd: /boot/ovirt-node-ng-4.2.4-0.20180626.0+1/initramfs-3.10.0-862.3.3.el7.x86_64.img root: /dev/onn/ovirt-node-ng-4.2.4-0.20180626.0+1 current_layer: ovirt-node-ng-4.2.4-0.20180626.0+1 Just posting for others that might have the same issue.

4 9

HostedEngine cannot migrate to added hosts
by Ariez Ahito 23 Aug '18

23 Aug '18

i followed the instruction on how to add hosts to Hosted-engine deployment. but when i tried to migrate the hostedEngine virtual machine. its says "no availble host to migrate to" upon checking on the added host Hosted Engine HA: not active systemctl status vdsmd ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2018-08-20 01:14:19 EDT; 56min ago Process: 26795 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS) Process: 26799 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) Main PID: 26879 (vdsmd) Tasks: 46 CGroup: /system.slice/vdsmd.service └─26879 /usr/bin/python2 /usr/share/vdsm/vdsmd Aug 20 02:09:42 ovirt-node5 vdsm[26879]: ERROR failed to retrieve Hosted Engine HA score '[Errno 2] No such file or directory'Is the Hosted Engine setup finished? Aug 20 02:09:43 ovirt-node5 vdsm[26879]: ERROR failed to retrieve Hosted Engine HA score '[Errno 2] No such file or directory'Is the Hosted Engine setup finished? vdsm.log 2018-08-20 02:11:28,548-0400 ERROR (periodic/0) [root] failed to retrieve Hosted Engine HA score '[Errno 2] No such file or directory'Is the Hosted Engine setup finished? (api:196)

4 17

Anyone have any luck with Bacchus?
by Wesley Stewart 23 Aug '18

23 Aug '18

I am trying to get Bacchus installed: https://github.com/openbacchus/bacchus It seems he has upgraded to installing via an ansible playbook. I can get this to run all the way through, hopefully NGINX either ends up responding with a "Gateway error" or it will give me the default nginx landing page. I have tried with a RHEL7 and CentOS7 VM, as well as in a CentOS\systemd docker container, all of which having about the same amount of luck. I was just curious if anyone else has gotten this to work recently.

3 4