- Users - oVirt List Archives

[ANN] oVirt 4.2.5 is now generally available
by Lev Veyde 30 Jul '18

30 Jul '18

The oVirt Project is pleased to announce the general availability of oVirt 4.2.5 as of July 30th, 2018 This update is the fifth release in a series of stabilization updates to the 4.2 series. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.3 release highlights: http://www.ovirt.org/release/4.2.3/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.3/ [2] http://resources.ovirt.org/pub/ovirt-4.2/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: adding hosts problems with GlusterFS
by Bill Dossett 30 Jul '18

30 Jul '18

Hmm, resounding silence.... Have attached a screen shot of the host storage devices on the host I added after the initial deployment. So at the bottom you can see that sdb - sdg are all locked and FS type is multipath_member those all equate to the UID type NAME at the top. The very top row, I created a brick, so it is also now locked, however when I go to brick view there is no brick. I also can't seem to delete any brick one it is created either. On the first 3 hosts, sdb - sdg are all unlocked and I can create bricks... going to remove a host and re-add it to see if there is anything I am missing, but I don't have any other ideas at this point. [cid:image001.png@01D427F6.9CDACC90] Regards, Bill Bill Dossett DevOps Ninja AWS-DevOps-Pro<https://aws.amazon.com/certification/certified-devops-engineer-professional/>, AWS-SA-A<https://aws.amazon.com/certification/certified-solutions-architect-associat…> VCAP-DCA<http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30483&ui=www_cert>, VCAP-DCD<http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30484&ui=www_cert>, MCSA Win Server IT - Software Innovation Solutions M +1 303-725 8163 bill.dossett(a)pb.com<mailto:bill.dossett@pb.com> pitneybowes.com Pitney Bowes 4750 Walnut Street Boulder CO, 80301 [sis] Learn more about Software Innovation Solutions<http://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx> In Engineering, Software Support or Professional Services? Raise a ticket via Remedy Anywhere [HERE<teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.…>] takes less than a minute CloudForms User Guide available [HERE<https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%20…>]

1 0

up and running with ovirt 4.2 and gluster
by william.dossett＠gmail.com 30 Jul '18

30 Jul '18

Hi, I have my ovirt 4.2 hci cluster up and running, but I have a probably stupid question. During the setup and in the documents it defaults to setting up the engine datastore/volume, a VMstore/volume and a data/volume. What is the Data volume for? I am planning on running VMs on this so I would assume I need VMstore and that's what I will grow on my system. In previous installs you had the opportunity to create the ISO domain, but not now. I can see how to create in the engine UI so that's fine, but I am just wondering what people use the Data volume for as an example. Thanks Bill

7 25

Import Netapp snapshot volume into ovirt and start VM from volume snapshot
by Igor Zinovik 30 Jul '18

30 Jul '18

Hello. I'm trying to implement following backup scenario for my VMs: storage domain is a volume on netapp appliance connected to oVirt cluster via NFS3. Netapp produces its zero copy snapshots of this volume. I want to be able to restore VMs from these snapshots, e.g. Netapp can export snapshot to ovirt as another NFS volume after that I want to be able to import VM or attach VM disks from snapshot volume to VM and start it. As far as I understand it is basic backup|migration scenario when user wants to move VMs from one ovirt DC to another ovirt DC. Right now I cannot import snapshot volume which contains exactly same domain metadata (in dom_dm/ directory) as original volume (which I cannot detach since it hosts disks for running VMs). I tried to rename dom_md/, but with no success in domain import process. Maybe someone in this list uses same scenario for VM backup and can give some advice.

2 3

VM User with UserRole missing permissions to activate console and other actions
by Callum Smith 30 Jul '18

30 Jul '18

Dear All, Please see the errors below. I'm seeing this in the engine.log when as a user I'm trying to activate either a VM console or reboot a VM which I have access to as a user ("UserRole permission assigned to VM). 2018-07-18 10:51:33,554+01 INFO [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-9) [557ca876] Running command : CreateUserSessionCommand internal: false. 2018-07-18 10:51:33,575+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-9) [557ca876] E VENT_ID: USER_VDC_LOGIN(30), User callum@Biomedical Research Computing connecting from '192.168.1.241' using session 'wiWA25wdaRP1zay iyTSGBJKpvi89LdzgKqeX12BcZhNVhpV2BIA+zkAnT50xOSDglxnhfAi3S2ZiODls8JYFUA==' logged in. 2018-07-18 10:51:34,135+01 ERROR [org.ovirt.engine.core.bll.GetSystemStatisticsQuery] (default task-5) [8d830cdb-fc11-4e68-94e6-73309 65c4488] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,205+01 ERROR [org.ovirt.engine.core.bll.GetPermissionsForObjectQuery] (default task-26) [ba1825f1-60fb-44cd-8b57- ea701cf698c0] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,242+01 ERROR [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default task-26) [] Operation Faile d: query execution failed due to insufficient permissions. 2018-07-18 10:51:34,389+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,393+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,394+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,396+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:59,195+01 WARN [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] User '9386d6f5-f172-4cdb -abca-62492a357888' is trying to take the console of virtual machine 'ddb23e0a-01d5-403c-89ab-37c400d2c938', but the console is alrea dy taken by user 'd021fc10-4f7c-11e8-88cb-00163e6a7aff'. 2018-07-18 10:51:59,197+01 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] No permission found for user '9386d6f5-f172-4cdb-abca-62492a357888' or one of the groups he is member of, when running action 'SetVmTicket', Required permiss ions are: Action type: 'USER' Action group: 'RECONNECT_TO_VM' Object type: 'VM' Object ID: 'ddb23e0a-01d5-403c-89ab-37c400d2c938'. 2018-07-18 10:51:59,197+01 WARN [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] Validation of action 'Se tVmTicket' failed for user callum@Biomedical Research Computing. Reasons: VAR__ACTION__SET,VAR__TYPE__VM_TICKET,USER_CANNOT_FORCE_REC ONNECT_TO_VM 2018-07-18 10:51:59,198+01 ERROR [org.ovirt.engine.api.restapi.resource.BackendVmGraphicsConsoleResource] (default task-18) [] Operat ion Failed: USER_CANNOT_FORCE_RECONNECT_TO_VM Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

4 6

oVirt 4.2.5.1-1.el7 JSON-RPC statistics error
by Maton, Brett 30 Jul '18

30 Jul '18

I've got one physical host in a 3 host CentOS7.5 cluster that reports the following error several times a day VDSM node3.example.com command Get Host Statistics failed: Internal JSON-RPC error: {'reason': '<Fault 1: "<type \'exceptions.AttributeError\'>:\'NoneType\' object has no attribute \'statistics\'">'} Any ideas what the problem might be?

3 15

Re: Hosted Engine Deploy kernel panics on boot
by Karli Sjöberg 30 Jul '18

30 Jul '18

2 2

Fwd: Re: up and running with ovirt 4.2 and gluster
by Jayme 30 Jul '18

30 Jul '18

---------- Forwarded message --------- From: Jayme <jaymef(a)gmail.com> Date: Sun, Jul 29, 2018, 10:09 PM Subject: Re: [ovirt-users] Re: up and running with ovirt 4.2 and gluster To: Mike <xenithorb(a)fedoraproject.org> On this same subject one thing I'm currently hung up on re: HCI setup is the next step in the cockpit config for glusterfs. I have three nodes setup with two drives each in jbod. On the brick config screen you have to specify the device location and size of each of the volumes you configure on the previous step i.e engine and data. It seems that I can only specify one of my drives for the data volume. So I'd have to pick /dev/SDA drive for engine and /dev/sdb for data, but I have 2x2tb drives what do I do with all the other space on the devocd I put the engine volume on? If I choose to use sdb for data and have it 1.8tb does that mean the data storage will only use one single drive in each of my three nodes? I want to make use of all six drives to increase I/o performance. I don't understand how the jbod config of gluster is suppose to work. What if I had even more drives in each node say 4 separate drives how would I make use of all drives when I can only specify one device for each volume? I'm thinking about creating a data and data2 volume and specifying SDA for data and sdb for data2. Am I completely misunderstanding the setup here. Its very confusion and there is next to no documentation on HCI available. On Sun, Jul 29, 2018, 6:34 PM Mike, <xenithorb(a)fedoraproject.org> wrote: > > Why would they be setup by default via the cockpit if they are no longer > > needee? > > > > On Sat, Jul 28, 2018, 1:13 PM femi adegoke, <ovirt(a)fateknollogee.com> > wrote: > > I agree, that step alone is very confusing > > - vmstore is/was "export" and is no longer needed > - iso domains are no longer needed > - The only domains you need in the HCI setup are :/data and :/engine > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/3HL7XGWWTZ6WB… >

2 1

Hosted engine unaviable after storage rebuild
by sebastian.w＠gmx.ch 29 Jul '18

29 Jul '18

Hello all, My hosted engine does not start up anymore, because the node can't reach the storage. The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable. What happend is that my NAS crashed and I had to rebuild it from the backup. I'm quit sure that I called all the NFS shares the same way as they bevore the issue. How can I figure out whats the issue with the storage? The logs wheren't realy helpful for me (but may it's me and not the logs to blame) Regards and thanks Sebi

2 4

Changing Network Interfaces on host causes bond to go offline
by oBSD Nub 29 Jul '18

29 Jul '18

Everytime I try to change assigned Logical networks (add ip addresses, assign a logical network, etc) the bond0 interface winds up going down. I have to do a ifup bond0 from the console, and the engine reconnects. After a lot of digging, I think this is the offending command, but I don't know how to read it or next troubleshooting steps. Anyone want to point me in the right direction? Thanks! 2018-07-28 18:07:36,661-0500 WARN (vdsm.Scheduler) [Executor] Worker blocked: <Worker name=jsonrpc/6 running <Task <JsonRpcTask {'params': {u'connectionParams': [{u'netIfaceName': u'bond0.3001', u'id': u'0808bc71-b5f7-4886-9dc8-e21b0d2abf14', u'connection': u'192.168.200.81', u'iqn': u'iqn.2002-10.com.infortrend:raid.uid577981.001', u'user': u'', u'tpgt': u'1', u'ifaceName': u'bond0.3001', u'password': '********', u'port': u'3260'}, {u'netIfaceName': u'bond0.3002', u'id': u'77c7e9dd-cd46-48be-ade1-06645772c405', u'connection': u'192.168.200.81', u'iqn': u'iqn.2002-10.com.infortrend:raid.uid577981.001', u'user': u'', u'tpgt': u'1', u'ifaceName': u'bond0.3002', u'password': '********', u'port': u'3260'}], u'storagepoolID': u'2cde92be-7b43-11e8-b08d-00505690367f', u'domainType': 3}, 'jsonrpc': '2.0', 'method': u'StoragePool.connectStorageServer', 'id': u'9a414389-2b42-4a20-b59c-c3bc9d19c7b4'} at 0x7f29980cdcd0> timeout=60, duration=60 at 0x7f29980cdfd0> task#=4 at 0x7f299837af10>, traceback: File: "/usr/lib64/python2.7/threading.py", line 785, in __bootstrap self.__bootstrap_inner() File: "/usr/lib64/python2.7/threading.py", line 812, in __bootstrap_inner self.run() File: "/usr/lib64/python2.7/threading.py", line 765, in run self.__target(*self.__args, **self.__kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 194, in run ret = func(*args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 301, in _run self._execute_task() File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in _execute_task task() File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in __call__ self._callable() File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 523, in __call__ self._handler(self._ctx, self._req) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 566, in _serveRequest response = self._handle_request(req, ctx) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request res = method(**params) File: "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod result = fn(*methodArgs) File: "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1070, in connectStorageServer connectionParams) File: "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line 73, in wrapper result = ctask.prepare(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108, in wrapper return m(self, *a, **kw) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1179, in prepare result = self._run(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File: "<string>", line 2, in connectStorageServer File: "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in method ret = func(*args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2395, in connectStorageServer conObj.connect() File: "/usr/lib/python2.7/site-packages/vdsm/storage/storageServer.py", line 487, in connect iscsi.addIscsiNode(self._iface, self._target, self._cred) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsi.py", line 217, in addIscsiNode iscsiadm.node_login(iface.name, target.address, target.iqn) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 327, in node_login portal, "-l"]) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 122, in _runCmd return misc.execCmd(cmd, printable=printCmd, sudo=True, sync=sync) File: "/usr/lib/python2.7/site-packages/vdsm/common/commands.py", line 80, in execCmd (out, err) = p.communicate(data) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 924, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 1706, in _communicate orig_timeout) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 1779, in _communicate_with_poll ready = poller.poll(self._remaining_time(endtime)) (executor:363)

1 0