- Users - oVirt List Archives

ovirt 4.1 gluster 3.8 repo no longer exist.
by Edward Clay 22 May '18

22 May '18

While checking for some patches on one of my ovirt systems I found that the ovirt-4.1-dependencies.repo no longer has a 3.8 version available. I see newer versions but not sure if I just need to change the following to point to it or upgrade to 4.2. baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.8/ to baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.10/ or baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.12/ Does anyone have the correct procedure I should follow? Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

2 1

Re: hosted-engine ovirt-engine server not run
by dhy336＠sina.com 22 May '18

22 May '18

hi, I try to run my engine, if engine is good run, it has more log info in engine.log than bad run.my bad run engine log miss some info, I should how to dubug this issue? 2018-05-21 17:35:43,446+08 INFO [org.ovirt.engine.core.bll.hostdev.RefreshHostDevicesCommand] (EE-ManagedThreadFactory-engine-Thread-1) [6ced2adb] Running command: RefreshHostDevicesCommand internal: true. Entities affected : ID: 34fa518e-e453-4de2-bd18-4942885c8aa5 Type: VDSAction group MANIPULATE_HOST with role type ADMIN2018-05-21 17:35:43,447+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdev.HostDeviceManager@20ad9625 2018-05-21 17:35:43,449+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] Initializing DWH Heart Beat2018-05-21 17:35:43,464+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] DWH Heart Beat initialized2018-05-21 17:35:43,465+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.dwh.DwhHeartBeat@75f99d39 2018-05-21 17:35:43,539+08 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ServerService Thread Pool -- 64) [6ced2adb] EVENT_ID: AFFINITY_RULES_ENFORCEMENT_MANAGER_START(10,780), Affinity Rules Enforcement Manager started.2018-05-21 17:35:43,542+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.scheduling.AffinityRulesEnforcementManager@703aa6cd 2018-05-21 17:35:43,547+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.CertificationValidityChecker@47df0bd8 2018-05-21 17:35:43,554+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdeploy.HostUpdatesCheckerService@4dc8896 2018-05-21 17:35:43,556+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Start initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Finished initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.IPTablesDeprecationNotifier@46fc7dd7 ----- Original Message ----- From: Simone Tiraboschi <stirabos(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted-engine ovirt-engine server not run Date: 2018-05-21 21:05 On Mon, May 21, 2018 at 12:21 PM, <dhy336(a)sina.com> wrote: Hi I deploy hosted-engine with two nodes, when I power off the node that engine is runing, other node can run VM after about 3 minutes.but ovirt-engine server could not normally run. but systemctrl resetart ovirt-engine. ovirt-engine server can run. this is VM engine logs. Nothing seams bad from that logs.Can you please try reproducing it? _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

1 0

ovirt with multiple engines
by Michael Watters 21 May '18

21 May '18

Is it possible to have multiple engines with different versions of ovirt running in the same cluster? I am working on a plan to upgrade our ovirt cluster to the 4.2 release however we would like to have a rollback plan in case there are issues with the new engine.

4 5

gnome keyring and ssh passphrase?
by Gianluca Cecchi 21 May '18

21 May '18

Hello, I'm starting here in F28 to use gnome session again, after some Fedora versions... I was in Mate up to some days ago and the ssh passphrase was in need to be inserted only once in mater-terminal, because I had this in my .bashrc (I think) export SSH_ASKPASS="/usr/bin/ksshaskpass" Now I see that my gnome-terminal continues to ask my passhprase without giving chance to save it into its keyring. I read this https://wiki.gnome.org/Projects/GnomeKeyring/Ssh but I haven't completely understood it (if it is current) It seems gnome-keyring-daemon is running [g.cecchi@ope46 ~]$ ps -ef|grep keyr g.cecchi 1972 1 0 08:44 ? 00:00:13 /usr/bin/gnome-keyring-daemon --daemonize --login g.cecchi 16480 14954 0 15:11 pts/8 00:00:00 grep --color=auto keyr [g.cecchi@ope46 ~]$ but is there any other setting to do not to insert every time my passhrase? Thanks, Gianluca

1 1

hosted-engine ovirt-engine server not run
by dhy336＠sina.com 21 May '18

21 May '18

Hi I deploy hosted-engine with two nodes, when I power off the node that engine is runing, other node can run VM after about 3 minutes.but ovirt-engine server could not normally run. but systemctrl resetart ovirt-engine. ovirt-engine server can run. this is VM engine logs.

2 1

vGPU VM not starting
by Callum Smith 21 May '18

21 May '18

Dear All, Our vGPU installation is progressing, though the VM is failing to start. 2018-05-16 22:57:34,328+0100 ERROR (vm/1bc9dae8) [virt.vm] (vmId='1bc9dae8-a0ea-44b3-9103-5805100648d0') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2872, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: Cannot get interface MTU on '': No such device That's the specific error, some other information. It seems the GPU 'allocation' of uuid against the nvidia-xx mdev type is proceeding correctly, and the device is being created by the VM instantiation but the VM does not succeed in going up with this error. Any other logs or information relevant to help diagnose? Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

3 4

User & Roles
by Simon Coter 21 May '18

21 May '18

Hi, I'm looking how-to create roles/users and give them access to specific datacenter/host(s). I looked on the documentation but I hadn't been able to find the proper section; anyone that can give me an help ? Thanks Simon

3 3

Preventing users to see other VMs
by Aziz 21 May '18

21 May '18

Hi list, I'm trying to remove the default "everyone" user from Ovirt, so that each user can have access to its own interface to manage a unique VM. I wonder if this is possible, because so far I'm unable to remove everyone user. Thank you

4 11

offsite data replication
by ovirt＠fateknollogee.com 21 May '18

21 May '18

I read somewhere that RHEL 7.5 makes "offsite data replication" easy to do. Is this feature available in oVirt?

2 2

Hosted Engine Setup error (oVirt v4.2.3)
by ovirt＠fateknollogee.com 21 May '18

21 May '18

Engine network config error Following this blog post: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluste… I get an error saying the hosted engine setup is "trying" to use vibr0 (192.168.xxx.x) even though I have the bridge interface set to "eno1" Regardless of whether the Edit Hosts File is checked or unchecked, it overwrites my engine IP entry from 10.50.235.x to 192.168.xxx.x The same thing happens whether I set the engine IP to Static or DHCP (I don't have DNS, I'm using static entries in /etc/hosts). Any ideas it "insists" on using "vibr0" instead of "eno1"? **also posted this on IRC

5 33