- Users - oVirt List Archives

KVM Import with Thin Provisioning
by Alan Griffiths 30 May '17

30 May '17

Hi, I don't seem to be able create thin provision disks when importing from KVM. Once import is complete the disk allocation policy is reported as thin, but the actual size is in fact slightly larger than the virtual size. For example, original qcow2 file size - 6G. Virtual size - 1024G. Imported actual size (according to Engine GUI) 1126G. Is this a known issue? Running 4.0.4. Thanks, Alan

2 2

Migrating VMs because previous host became non-operational
by Brett Holcomb 30 May '17

30 May '17

I'm seeing this error "Migrating VM blah-blah because previous host became non-operational. This appears in the WebUI under the task lists and is getting annoying since it disrupts things like creating snapshots. This migration is quite a feat on a single hosted engine installation with only one host so what exactly is going on? I'd be glad to include some logs and have looked at the vdsm logs but have no idea what I'm looking form.

2 1

error: hosted engine setup
by ovirt＠fateknollogee.com 30 May '17

30 May '17

Trying to complete the hosted engine setup, I get this Error message: Failed to execute stage 'Closing up': The VM is not powering up: please check VDSM logs Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy I will restart the setup & see if that clears things up.

3 7

GetStorageDeviceListVDS failed
by Joel Diaz 30 May '17

30 May '17

Good morning oVirt community, I need some assistance. I am running a 3 host, hosted engine, gluster environment. The hosts are running centos 7.3 and the engine is version 4.1.2.3 Since yesterday, every 2 hours, the engine reports the error below on host 2 and 3. event ID 10802 VDSM <host> command GetStorageDeviceListVDS failed: 'gluster_vg_sdb-/dev/mapper/36589cfc000000f05aea0f2b50f8d76e5: read failed after 0 of 4096 at 0: Input/output error' I've attached logs from both hosts. Hosts 3 is the SPM and holds the arbiter brick of all 4 gluster volumes. As always, your help is appreciated. Joel

2 7

Ovirt Hosted-Engine VM iptables
by Andrew Dent 29 May '17

29 May '17

--------=_MB05829694-0576-4C65-A28B-FE7AAA10548D Content-Type: text/plain; format=flowed; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi I would like to add rules into the iptables of the Hosted Engine VM in=20 Ovirt. I am wanting to monitor the Ovirt Engine using Nagios -> NRPE and I=20 would like to open port 5666 the version is oVirt Engine Version: 4.1.1.8-1.el7.centos I have tried using the normal process for iptables (iptables-save etc),=20 but it seems that the file /etc/sysconfig/iptables is ignored when the Ovirt Engine VM starts. How can I add permanent iptables rules into the Engine VM? Kind regards Andrew --------=_MB05829694-0576-4C65-A28B-FE7AAA10548D Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <?xml version=3D"1.0" encoding=3D"utf-16"?><html><head> <style id=3D"signatureStyle"></style> <style><![CDATA[#xcc10ef20af594fb9a2ace3c3ec715127 .plain tt{ font-family:monospace; font-size:100%; font-weight:normal; font-style:normal; } #xcc10ef20af594fb9a2ace3c3ec715127 .plain div{ white-space:pre-wrap; } #xcc10ef20af594fb9a2ace3c3ec715127{ font-family:'Segoe UI'; font-size:12pt; color:#000; margin-left:0px; margin-right:8px; background-color:#FFF; } #xcc10ef20af594fb9a2ace3c3ec715127 .plain tt{ font-family:'Segoe UI'; font-size:12pt; } #xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c,#xcc10ef20af594fb9a2ac= e3c3ec715127 #x926e53639d9245c #x136253a26533439c817a2d4cd93dbb00 #xea120d6= 0c95044d #xb71224f920234978acc74f4d23143069,#xcc10ef20af594fb9a2ace3c3ec715= 127 #x926e53639d9245c #x136253a26533439c817a2d4cd93dbb00 #xea120d60c95044d{ font-family:Tahoma; font-size:12pt; } #xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c,#xcc10ef20af594fb9a2ac= e3c3ec715127 #x926e53639d9245c #x136253a26533439c817a2d4cd93dbb00 #xea120d6= 0c95044d,#xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a2653= 3439c817a2d4cd93dbb00,#xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c{ font-family:'Segoe UI'; font-size:12pt; } #xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a26533439c817a= 2d4cd93dbb00{ font-family:'Segoe UI'; font-size:12pt; color:#000; margin-left:0px; margin-right:8px; background-color:#FFF; } #xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a26533439c817a= 2d4cd93dbb00 #xea120d60c95044d #xb71224f920234978acc74f4d23143069 p.MsoNorm= al,#xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a26533439c8= 17a2d4cd93dbb00 #xea120d60c95044d p.MsoNormal{ margin:0cm 0cm 0.0001pt; font-size:11pt; font-family:Calibri,sans-serif; } #xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a26533439c817a= 2d4cd93dbb00 #xea120d60c95044d #xb71224f920234978acc74f4d23143069 div.WordS= ection1,#xcc10ef20af594fb9a2ace3c3ec715127 #x926e53639d9245c #x136253a26533= 439c817a2d4cd93dbb00 #xea120d60c95044d div.WordSection1{ page:WordSection1; } #xcc10ef20af594fb9a2ace3c3ec715127 #x828a9ef720e045b9a398538faa289985 .plai= n tt{ font-family:monospace; font-size:100%; font-weight:normal; font-style:normal; } #xcc10ef20af594fb9a2ace3c3ec715127 #x828a9ef720e045b9a398538faa289985 .plai= n div{ white-space:pre-wrap; } #xcc10ef20af594fb9a2ace3c3ec715127 #x828a9ef720e045b9a398538faa289985{ font-family:'Segoe UI'; font-size:12pt; color:#000; margin-left:0px; margin-right:8px; background-color:#FFF; } #xcc10ef20af594fb9a2ace3c3ec715127 #x828a9ef720e045b9a398538faa289985 .plai= n tt{ font-family:'Segoe UI'; font-size:12pt; } #xcc10ef20af594fb9a2ace3c3ec715127{ font-family:Tahoma; font-size:12pt; }]]></style> </head> <body><div><div id=3D"xcc10ef20af594fb9a2ace3c3ec715127"> <div><div>Hi</div><div><br /></div><div>I would like to add rules into the= iptables of the Hosted Engine VM in Ovirt.</div><div>I am wanting to monito= r the Ovirt Engine using Nagios -> NRPE and I would like to open port 56= 66</div><div><div id=3D"x828a9ef720e045b9a398538faa289985"> <div class=3D"plain"><tt style=3D"word-wrap:break-word"><div><br /></div><d= iv>the version is=20 <span class=3D"gwt-InlineLabel">oVirt Engine Version: 4.1.1.8-1.el7.centos<= /span> </div><div>I have tried using the normal process for iptables (iptables-sav= e etc), but it seems that the file=C2=A0</div><div><code class=3D"filename"= >/etc/sysconfig/iptables</code> </div><div>is ignored when the Ovirt Engine VM starts. </div><div><br /></d= iv><div>How can I add permanent iptables rules into the Engine VM?</div><di= v><br /></div></tt></div></div></div><div id=3D"signature_old"><div id=3D"x= 926e53639d9245c"><div style=3D"font-family: Tahoma;"><span id=3D"x89c8d9902= b0345bca5fb60b10010a8ea"> <div id=3D"x136253a26533439c817a2d4cd93dbb00"><div id=3D"signature_old"><di= v id=3D"xea120d60c95044d"><div class=3D"WordSection1"><div id=3D"xb71224f92= 0234978acc74f4d23143069"><div class=3D"WordSection1"><p class=3D"MsoNormal"= ><font style=3D"font-size: 14pt;">Kind regards</font></p><p class=3D"MsoNor= mal"><font style=3D"font-size: 14pt;"><br /></font></p><p class=3D"MsoNorma= l"><font style=3D"font-size: 14pt;">Andrew=C2=A0</font></p></div></div></di= v></div></div></div></span></div></div></div></div></div></div><div><br /><= /div> </body></html> --------=_MB05829694-0576-4C65-A28B-FE7AAA10548D--

2 1

Timeout for Hosts
by Sven Achtelik 29 May '17

29 May '17

--_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, I have 2 hosts which are at remote locations where the ISP is forcing a con= nection reset after some days. During that reset the connection will be dow= n for at most 2 minutes and the engine starts to complain about the hosts n= ot being reachable. What is the right value to tweak to compensate this ? Is it on of these: TimeoutToResetVdsInSeconds, VdsRefreshRate, vdsTimeout ?= And is it possible to only apply this for a certain cluster or DC or is it= global ? Thank you, Sven --_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 15 (filtered medium)"><style></style></head><body lang=3DDE link=3D"#0563C1" v= link=3D"#954F72"><div class=3DWordSection1><p class=3DMsoNormal>Hi All, <o:= p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>= <span lang=3DEN-US>I have 2 hosts which are at remote locations where the I= SP is forcing a connection reset after some days. During that reset the con= nection will be down for at most 2 minutes and the engine starts to complai= n about the hosts not being reachable. What is the right value to tweak to = compensate this ? <o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DE= N-US>Is it on of these: TimeoutToResetVdsInSeconds, VdsRefreshRate, vdsTime= out ? And is it possible to only apply this for a certain cluster or DC or = is it global ? <o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-U= S style=3D'mso-fareast-language:DE'><o:p> </o:p></span></p><p class=3D= MsoNormal><span lang=3DEN-US style=3D'mso-fareast-language:DE'>Thank you, <= o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'mso-f= areast-language:DE'><o:p> </o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US style=3D'mso-fareast-language:DE'>Sven </span><o:p></o:p></p><= /div></body></html>= --_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_--

3 8

Re: [ovirt-users] Building oVirt engine on Debian
by shubham dubey 27 May '17

27 May '17

Hi, I got the same problem once and it seems to be related to memory. So first thing is make sure you have at least 4 gb of ram because thats the minimum requirement for ovirt-engine to run. If with 4gb+ ram you still getting error like this then you must have no swap memory turn on. In that case create a swap partition and turn on using 'swapon /dev/swap-partition'. If the error is still there then may be jvm is not able to access the memory at some place due to selinux. So disable the selinux then try again. Regards, Shubham

2 2

Issue with deploy HostedEngine on second host with Ovirt 4.1
by alex＠rt14.ru 26 May '17

26 May '17

2 6

VDSM fails after a while
by nicolas＠devels.es 26 May '17

26 May '17

Hi, We recently upgraded vdsm on a host using the webadmin. After activating it, it kept failing so we tried to activate it back via 'systemctl start vdsmd'. # systemctl start vdsmd Job for vdsmd.service failed because the control process exited with error code. See "systemctl status vdsmd.service" and "journalctl -xe" for details. Having a look at the status of the process I see: # systemctl status vdsmd ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: failed (Result: start-limit) since vie 2017-05-26 11:02:41 WEST; 14s ago Process: 25018 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=1/FAILURE) may 26 11:02:40 systemd[1]: Failed to start Virtual Desktop Server Manager. may 26 11:02:40 systemd[1]: Unit vdsmd.service entered failed state. may 26 11:02:40 systemd[1]: vdsmd.service failed. may 26 11:02:41 systemd[1]: vdsmd.service holdoff time over, scheduling restart. may 26 11:02:41 systemd[1]: start request repeated too quickly for vdsmd.service may 26 11:02:41 systemd[1]: Failed to start Virtual Desktop Server Manager. may 26 11:02:41 systemd[1]: Unit vdsmd.service entered failed state. may 26 11:02:41 systemd[1]: vdsmd.service failed. To check what happened I run the vdsm_init_common.sh script by myself and saw: # /usr/libexec/vdsm/vdsmd_init_common.sh --pre-start vdsm: Running mkdirs vdsm: Running configure_coredump vdsm: Running configure_vdsm_logs vdsm: Running wait_for_network vdsm: Running run_init_hooks vdsm: Running upgraded_version_check vdsm: Running check_is_configured Current revision of multipath.conf detected, preserving lvm is configured for vdsm libvirt is not configured for vdsm yet Modules sebool, passwd, libvirt are not configured Error: One of the modules is not configured to work with VDSM. To configure the module use the following: 'vdsm-tool configure [--module module-name]'. If all modules are not configured try to use: 'vdsm-tool configure --force' (The force flag will stop the module's service and start it afterwards automatically to load the new configuration.) vdsm: stopped during execute check_is_configured task (task returned with error code 1). ----- I run the 'vdsm-tool configure --force' command, it ends successfully and after that I can start the vdsmd process. But... after a while it fails again and I need to re-run the same command all the time. Is this a known bug? any temporary workaround? Versions: vdsm-4.19.15-1.el7.centos.x86_64 libvirt-2.0.0-10.el7_3.5.x86_64 Thanks. Regards.

2 3

[ANN] oVirt 4.1.3 First Test Compose is now available
by Sandro Bonazzola 26 May '17

26 May '17

The oVirt Project is pleased to announce the availability of the First Test Compose of oVirt 4.1.3 for testing, as of May 26th, 2017 This is pre-release software. Please take a look at our community page[1] to know how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This pre-release should not to be used in production. This update is the first test compose of the third in a series of stabilization updates to the 4.1 series. 4.1.3 brings more than 15 enhancements and more than 100 bugfixes, including more than 50 high or urgent severity fixes, on top of oVirt 4.1 series This release is available now for: * Fedora 24 (tech preview) * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later * oVirt Node 4.1 * Fedora 24 (tech preview) See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance has not been composed - oVirt Live has not been composed - oVirt Node has not been composed We are addressing compose issues for above components which are missing ansible 2.3 and latest fluentd builds from CentOS SIGs. Additional Resources: * Read more about the oVirt 4.1.3 release highlights: http://www.ovirt.org/release/4.1.3/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1.3/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0