- Users - oVirt List Archives

oVirt 3.5.1 - VM "hostedengine" Failing to start
by Mikola Rose 28 Jan '15

28 Jan '15

--_000_DDFE403B96084E3CA029EFC39908A6C9powersoftcom_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi there, I seem to have run into a problem. my hosted engine vm is failing to start= ; vdsm.log; Thread-20::DEBUG::2015-01-27 16:53:37,999::fileSD::152::Storage.StorageDoma= in::(__init__) Reading domain in path /rhev/data-center/mnt/192.168.1.32:_V= olumes_Raid1/443b4931-667f-441f-98d8-51384e67a0af Thread-20::ERROR::2015-01-27 16:53:38,000::domainMonitor::256::Storage.Doma= inMonitorThread::(_monitorDomain) Error while collecting domain 443b4931-66= 7f-441f-98d8-51384e67a0af monitoring information Traceback (most recent call last): File "/usr/share/vdsm/storage/domainMonitor.py", line 221, in _monitorDom= ain self.domain =3D sdCache.produce(self.sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 98, in produce domain.getRealDomain() File "/usr/share/vdsm/storage/sdc.py", line 52, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 122, in _realProduce domain =3D self._findDomain(sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain dom =3D findMethod(sdUUID) File "/usr/share/vdsm/storage/nfsSD.py", line 122, in findDomain return NfsStorageDomain(NfsStorageDomain.findDomainPath(sdUUID)) File "/usr/share/vdsm/storage/fileSD.py", line 159, in __init__ validateFileSystemFeatures(sdUUID, self.mountpoint) File "/usr/share/vdsm/storage/fileSD.py", line 88, in validateFileSystemF= eatures oop.getProcessPool(sdUUID).directTouch(testFilePath) File "/usr/share/vdsm/storage/outOfProcess.py", line 320, in directTouch ioproc.touch(path, flags, mode) File "/usr/lib/python2.6/site-packages/ioprocess/__init__.py", line 507, = in touch self.timeout) File "/usr/lib/python2.6/site-packages/ioprocess/__init__.py", line 391, = in _sendCommand raise OSError(errcode, errstr) OSError: [Errno 13] Permission denied I assume this is an nfs issue so I checked to see if I could create a file = in the mounts from the host machine, which I could. My test bed is usign an old OS X NFS via xraid adn the export is ; /Volumes/Raid1 -maproot=3Droot:wheel -network 192.168.1.0 -mask 255.255.255= .0 drwxr-xr-x 6 vdsm kvm 204 Jan 27 16:30 443b4931-667f-441f-98d8-51= 384e67a0af drwxr-xr-x 4 vdsm kvm 136 Jan 27 12:32 data drwxr-xr-x 4 vdsm kvm 136 Jan 27 00:18 iso drwxr-xr-x 3 vdsm kvm 102 Jan 26 09:43 vm the host machine seems to mount the shares fine.... drwxr-xr-x 5 vdsm kvm 4096 Jan 27 12:28 . drwxr-xr-x 3 vdsm kvm 4096 Jan 27 10:04 .. drwxr-xr-x 13 vdsm kvm 544 Jan 27 00:12 192.168.1.32:_Volumes_Raid1 drwxr-xr-x 2 vdsm kvm 4096 Jan 27 00:12 192.168.1.32:_Volumes_Raid1_data drwxr-xr-x 2 vdsm kvm 4096 Jan 27 00:24 192.168.1.32:_Volumes_Raid1_iso and as I said above I can create files in any one of those mounts Is there a place I can look at to find the offending file? If that is the = issue... Oddly enough everything worked until i rebooted, so I must have e= ither changed something or something is buggered. --_000_DDFE403B96084E3CA029EFC39908A6C9powersoftcom_ Content-Type: text/html; charset="us-ascii" Content-ID: <24D10F8AA975974E9791EA01D2A22C0E(a)power-soft.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin= e-break: after-white-space;" class=3D""> Hi there, <div class=3D""><br class=3D""> </div> <div class=3D""><br class=3D""> </div> <div class=3D"">I seem to have run into a problem.  my hosted engine v= m is failing to start;</div> <div class=3D""><br class=3D""> </div> <div class=3D"">vdsm.log;</div> <div class=3D""><br class=3D""> </div> <div class=3D""><br class=3D""> </div> <div class=3D""> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >Thread-20::DEBUG::2015-01-27 16:53:37,999::fileSD::152::Storage.StorageDom= ain::(__init__) Reading domain in path /rhev/data-center/mnt/192.168.1.32:_= Volumes_Raid1/443b4931-667f-441f-98d8-51384e67a0af</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >Thread-20::ERROR::2015-01-27 16:53:38,000::domainMonitor::256::Storage.Dom= ainMonitorThread::(_monitorDomain) Error while collecting domain 443b4931-6= 67f-441f-98d8-51384e67a0af monitoring information</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >Traceback (most recent call last):</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/domainMonitor.py", line 221= , in _monitorDomain</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    self.domain =3D sdCache.produce(self.sdUUID)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/sdc.py", line 98, in produc= e</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    domain.getRealDomain()</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/sdc.py", line 52, in getRea= lDomain</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    return self._cache._realProduce(self._sdUUID)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/sdc.py", line 122, in _real= Produce</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    domain =3D self._findDomain(sdUUID)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/sdc.py", line 141, in _find= Domain</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    dom =3D findMethod(sdUUID)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/nfsSD.py", line 122, in fin= dDomain</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    return NfsStorageDomain(NfsStorageDomain.findDomainPath(sdUU= ID))</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/fileSD.py", line 159, in __= init__</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    validateFileSystemFeatures(sdUUID, self.mountpoint)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/fileSD.py", line 88, in val= idateFileSystemFeatures</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    oop.getProcessPool(sdUUID).directTouch(testFilePath)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/share/vdsm/storage/outOfProcess.py", line 320,= in directTouch</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    ioproc.touch(path, flags, mode)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/lib/python2.6/site-packages/ioprocess/__init__.py&q= uot;, line 507, in touch</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    self.timeout)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >  File "/usr/lib/python2.6/site-packages/ioprocess/__init__.py&q= uot;, line 391, in _sendCommand</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >    raise OSError(errcode, errstr)</div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >OSError: [Errno 13] Permission denied</div> </div> <div class=3D""><br class=3D""> </div> <div class=3D"">I assume this is an nfs issue so I checked to see if I coul= d create a file in the mounts from the host machine,  which I could.</= div> <div class=3D""><br class=3D""> </div> <div class=3D"">My test bed is usign an old OS X NFS via xraid adn the expo= rt is ;</div> <div class=3D""> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >/Volumes/Raid1 -maproot=3Droot:wheel -network 192.168.1.0 -mask 255.255.25= 5.0</div> </div> <div class=3D""><br class=3D""> </div> <div class=3D""> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= >drwxr-xr-x    6 vdsm   kvm      204 Jan 27 1= 6:30 443b4931-667f-441f-98d8-51384e67a0af</div> </div> <div style=3D"margin: 0px; font-size: 11px; font-family: Menlo;" class=3D""= > <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x    4 vdsm &nbsp= ; kvm      136 Jan 27 12:32 data</div> <div style=3D"margin: 0px;" class=3D""> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x    4 vdsm &nbsp= ; kvm      136 Jan 27 00:18 iso</div> <div style=3D"margin: 0px;" class=3D""> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x    3 vdsm &nbsp= ; kvm      102 Jan 26 09:43 vm</div> <div style=3D"margin: 0px;" class=3D""><br class=3D""> </div> <div style=3D"margin: 0px;" class=3D"">the host machine seems to mount the = shares fine....</div> <div style=3D"margin: 0px;" class=3D""><br class=3D""> </div> <div style=3D"margin: 0px;" class=3D""> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x  5 vdsm kvm 4096 Jan= 27 12:28 <span style=3D"font-variant-ligatures: no-common-ligatures; color= : #4c7aff" class=3D""> .</span></div> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x  3 vdsm kvm 4096 Jan= 27 10:04 <span style=3D"font-variant-ligatures: no-common-ligatures; color= : #4c7aff" class=3D""> ..</span></div> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x 13 vdsm kvm  544 Jan= 27 00:12 <span style=3D"font-variant-ligatures: no-common-ligatures; color= : #4c7aff" class=3D""> 192.168.1.32:_Volumes_Raid1</span></div> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x  2 vdsm kvm 4096 Jan= 27 00:12 <span style=3D"font-variant-ligatures: no-common-ligatures; color= : #4c7aff" class=3D""> 192.168.1.32:_Volumes_Raid1_data</span></div> <div style=3D"margin: 0px;" class=3D"">drwxr-xr-x  2 vdsm kvm 4096 Jan= 27 00:24 <span style=3D"font-variant-ligatures: no-common-ligatures; color= : #4c7aff" class=3D""> 192.168.1.32:_Volumes_Raid1_iso</span></div> </div> <div style=3D"margin: 0px;" class=3D""><br class=3D""> </div> </div> </div> </div> <div class=3D"">and as I said above I can create files in any one of those = mounts</div> <div class=3D""><br class=3D""> </div> <div class=3D""><br class=3D""> </div> <div class=3D"">Is there a place I can look at to find the offending file? =  If that is the issue...  Oddly enough everything worked until i = rebooted, so I must have either changed something or something is buggered.= </div> <div class=3D""><br class=3D""> </div> <div class=3D""><br class=3D""> </div> <div class=3D""><br class=3D""> </div> </body> </html> --_000_DDFE403B96084E3CA029EFC39908A6C9powersoftcom_--

4 8

libgfapi reintegration?
by Darrell Budic 28 Jan '15

28 Jan '15

Any plans or timeline to re-integrate full libgfapi support? From fismonce’s previous work, it appears that all the pieces are now in place, but his builds are now behind the current release versions of vdsmd… Thanks! -Darrell

1 0

change network MTU settings without taking all the VMs down?
by Darrell Budic 28 Jan '15

28 Jan '15

I finally got a couple of networks our from behind a wan based layer 2 bridge that required me to run at MTU 1448, and would like to get back up to MTU 1500. I see the GUI won’t let me do that while the network is in use. Any way around this, clean or otherwise? Restarting VMs to update them is ok, just trying to avoid having to take everything down at the same time. -Darrell

3 3

Does my Storage Domain crashed or is this iSCSI LUN's a problem?
by shimano 28 Jan '15

28 Jan '15

Hi guys, I'm trying to run one of my storage domains, which experienced failure. Unfortunately, I meet a very nasty error (Storage domain does not exist). Could someone tell me, how to try to restore this domain? P.S. It's an oVirt 3.4.2-1.el6 ********************************************************************************** /var/log/messages: Jan 26 12:48:49 node002 vdsm TaskManager.Task ERROR Task=`10d02993-b585-448f-9a50-bd3e8cda7082`::Unexpected error#012Traceback (most recent call last):#012 File "/usr/share/vdsm/storage/task.py", line 873, in _run#012 return fn(*args, **kargs)#012 File "/usr/share/vdsm/logUtils.py", line 45, in wrapper#012 res = f(*args, **kwargs)#012 File "/usr/share/vdsm/storage/hsm.py", line 2959, in getVGInfo#012 return dict(info=self.__getVGsInfo([vgUUID])[0])#012 File "/usr/share/vdsm/storage/hsm.py", line 2892, in __getVGsInfo#012 vgList = [lvm.getVGbyUUID(vgUUID) for vgUUID in vgUUIDs]#012 File "/usr/share/vdsm/storage/lvm.py", line 894, in getVGbyUUID#012 raise se.VolumeGroupDoesNotExist("vg_uuid: %s" % vgUUID)#012VolumeGroupDoesNotExist: Volume Group does not exist: ('vg_uuid: gyaCWf-6VKi-lI9W-JT6H-IZdy-rIsB-hTvZ4O',) Jan 26 12:48:49 node002 kernel: device-mapper: table: 253:26: multipath: error getting device Jan 26 12:48:49 node002 kernel: device-mapper: ioctl: error adding target to table ********************************************************************************** /var/log/vdsm.log: Thread-22::ERROR::2015-01-26 12:43:03,376::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain db52e9cb-7306-43fd-aff3-20831bc2bcaf Thread-22::ERROR::2015-01-26 12:43:03,377::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain db52e9cb-7306-43fd-aff3-20831bc2bcaf Thread-22::DEBUG::2015-01-26 12:43:03,377::lvm::373::OperationMutex::(_reloadvgs) Operation 'lvm reload operation' got the operation mutex Thread-22::DEBUG::2015-01-26 12:43:03,378::lvm::296::Storage.Misc.excCmd::(cmd) u'/usr/bin/sudo -n /sbin/lvm vgs --config " devices { preferred_names = [\\"^/dev/mapper/\\"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ \'a|/dev/mapper/mpathb|/dev/mapper/mpathc|/dev/mapper/mpathd|/dev/mapper/mpathe|/dev/mapper/mpathf|\', \'r|.*|\' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } " --noheadings --units b --nosuffix --separator | -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name db52e9cb-7306-43fd-aff3-20831bc2bcaf' (cwd None) Thread-22::DEBUG::2015-01-26 12:43:03,462::lvm::296::Storage.Misc.excCmd::(cmd) FAILED: <err> = ' /dev/mapper/mpathc: Checksum error\n /dev/mapper/mpathc: Checksum error\n Volume group "db52e9cb-7306-43fd-aff3-20831bc2bcaf" not found\n Skipping volume group db52e9cb-7306-43fd-aff3-20831bc2bcaf\n'; <rc> = 5 Thread-22::WARNING::2015-01-26 12:43:03,466::lvm::378::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] [' /dev/mapper/mpathc: Checksum error', ' /dev/mapper/mpathc: Checksum error', ' Volume group "db52e9cb-7306-43fd-aff3-20831bc2bcaf" not found', ' Skipping volume group db52e9cb-7306-43fd-aff3-20831bc2bcaf'] Thread-22::DEBUG::2015-01-26 12:43:03,466::lvm::415::OperationMutex::(_reloadvgs) Operation 'lvm reload operation' released the operation mutex Thread-22::ERROR::2015-01-26 12:43:03,477::sdc::143::Storage.StorageDomainCache::(_findDomain) domain db52e9cb-7306-43fd-aff3-20831bc2bcaf not found Traceback (most recent call last): File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain dom = findMethod(sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 171, in _findUnfetchedDomain raise se.StorageDomainDoesNotExist(sdUUID) StorageDomainDoesNotExist: Storage domain does not exist: (u'db52e9cb-7306-43fd-aff3-20831bc2bcaf',) Thread-22::ERROR::2015-01-26 12:43:03,478::domainMonitor::239::Storage.DomainMonitorThread::(_monitorDomain) Error while collecting domain db52e9cb-7306-43fd-aff3-20831bc2bcaf monitoring information Traceback (most recent call last): File "/usr/share/vdsm/storage/domainMonitor.py", line 204, in _monitorDomain self.domain = sdCache.produce(self.sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 98, in produce domain.getRealDomain() File "/usr/share/vdsm/storage/sdc.py", line 52, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 122, in _realProduce domain = self._findDomain(sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain dom = findMethod(sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 171, in _findUnfetchedDomain raise se.StorageDomainDoesNotExist(sdUUID) StorageDomainDoesNotExist: Storage domain does not exist: (u'db52e9cb-7306-43fd-aff3-20831bc2bcaf',) Thread-13::DEBUG::2015-01-26 12:43:05,102::task::595::TaskManager.Task::(_updateState) Task=`b4e85e37-b216-4d29-a448-0711e370a246`::moving from state init -> state preparing Thread-13::INFO::2015-01-26 12:43:05,102::logUtils::44::dispatcher::(wrapper) Run and protect: repoStats(options=None) Thread-13::INFO::2015-01-26 12:43:05,103::logUtils::47::dispatcher::(wrapper) Run and protect: repoStats, Return response: {u'7969d636-1a02-42ba-a50b-2528765cf3d5': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000457574', 'lastCheck': '7.5', 'valid': True}, u'5e1ca1b6-4706-4c79-8924-b8db741c929f': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.00100094', 'lastCheck': '6.3', 'valid': True}, u'cb85e6cd-df54-4151-8f3b-7e6d72b7372d': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.463061', 'lastCheck': '4.9', 'valid': True}, u'db52e9cb-7306-43fd-aff3-20831bc2bcaf': {'code': 358, 'version': -1, 'acquired': False, 'delay': '0', 'lastCheck': '1.6', 'valid': False}, u'5f595801-aaa5-42c7-b829-7a34a636407e': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.000942979', 'lastCheck': '7.9', 'valid': True}, u'c1ebd0f8-fa32-4fe3-8569-fb7d4ad8faf4': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000424499', 'lastCheck': '7.3', 'valid': True}} Thread-13::DEBUG::2015-01-26 12:43:05,103::task::1185::TaskManager.Task::(prepare) Task=`b4e85e37-b216-4d29-a448-0711e370a246`::finished: {u'7969d636-1a02-42ba-a50b-2528765cf3d5': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000457574', 'lastCheck': '7.5', 'valid': True}, u'5e1ca1b6-4706-4c79-8924-b8db741c929f': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.00100094', 'lastCheck': '6.3', 'valid': True}, u'cb85e6cd-df54-4151-8f3b-7e6d72b7372d': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.463061', 'lastCheck': '4.9', 'valid': True}, u'db52e9cb-7306-43fd-aff3-20831bc2bcaf': {'code': 358, 'version': -1, 'acquired': False, 'delay': '0', 'lastCheck': '1.6', 'valid': False}, u'5f595801-aaa5-42c7-b829-7a34a636407e': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.000942979', 'lastCheck': '7.9', 'valid': True}, u'c1ebd0f8-fa32-4fe3-8569-fb7d4ad8faf4': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000424499', 'lastCheck': '7.3', 'valid': True}} ********************************************************************************** [root@node002 shim]# multipath -ll mpathe (1NODE_001_LUN01) dm-6 SHIMI,VIRTUAL-DISK size=977G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 21:0:0:1 sdg 8:96 active ready running mpathd (1NODE_003_LUN01) dm-7 SHIMI,VIRTUAL-DISK size=977G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 20:0:0:1 sdf 8:80 active ready running mpathc (1NODE_002_LUN01) dm-4 SHIMI,VIRTUAL-DISK size=977G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 18:0:0:1 sdd 8:48 active ready running mpathb (1ATA_MARVELL_Raid_VD_0_1c3c8ecf5cf00010) dm-1 ATA,MARVELL Raid VD size=1.8T features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 0:0:0:0 sda 8:0 active ready running mpathf (1MANAGER_LUN01) dm-5 SHIMI,VIRTUAL-DISK size=500G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 19:0:0:1 sde 8:64 active ready running ********************************************************************************** [root@node002 shim]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 298.1G 0 disk ├─sdb1 8:17 0 1G 0 part /boot ├─sdb2 8:18 0 4G 0 part [SWAP] └─sdb3 8:19 0 293.1G 0 part └─vg_node002-LogVol00 (dm-0) 253:0 0 293.1G 0 lvm / sda 8:0 0 1.8T 0 disk └─sda1 8:1 0 1.8T 0 part sdd 8:48 0 976.6G 0 disk └─mpathc (dm-4) 253:4 0 976.6G 0 mpath sde 8:64 0 500G 0 disk └─mpathf (dm-5) 253:5 0 500G 0 mpath ├─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-metadata (dm-15) 253:15 0 512M 0 lvm ├─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-ids (dm-16) 253:16 0 128M 0 lvm ├─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-leases (dm-18) 253:18 0 2G 0 lvm ├─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-outbox (dm-20) 253:20 0 128M 0 lvm ├─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-inbox (dm-21) 253:21 0 128M 0 lvm └─cb85e6cd--df54--4151--8f3b--7e6d72b7372d-master (dm-22) 253:22 0 1G 0 lvm sdf 8:80 0 976.6G 0 disk └─mpathd (dm-7) 253:7 0 976.6G 0 mpath ├─5e1ca1b6--4706--4c79--8924--b8db741c929f-metadata (dm-14) 253:14 0 512M 0 lvm ├─5e1ca1b6--4706--4c79--8924--b8db741c929f-ids (dm-17) 253:17 0 128M 0 lvm ├─5e1ca1b6--4706--4c79--8924--b8db741c929f-leases (dm-19) 253:19 0 2G 0 lvm ├─5e1ca1b6--4706--4c79--8924--b8db741c929f-outbox (dm-23) 253:23 0 128M 0 lvm ├─5e1ca1b6--4706--4c79--8924--b8db741c929f-inbox (dm-24) 253:24 0 128M 0 lvm └─5e1ca1b6--4706--4c79--8924--b8db741c929f-master (dm-25) 253:25 0 1G 0 lvm sdg 8:96 0 976.6G 0 disk └─mpathe (dm-6) 253:6 0 976.6G 0 mpath ├─5f595801--aaa5--42c7--b829--7a34a636407e-metadata (dm-8) 253:8 0 512M 0 lvm ├─5f595801--aaa5--42c7--b829--7a34a636407e-ids (dm-9) 253:9 0 128M 0 lvm ├─5f595801--aaa5--42c7--b829--7a34a636407e-leases (dm-10) 253:10 0 2G 0 lvm ├─5f595801--aaa5--42c7--b829--7a34a636407e-outbox (dm-11) 253:11 0 128M 0 lvm ├─5f595801--aaa5--42c7--b829--7a34a636407e-inbox (dm-12) 253:12 0 128M 0 lvm └─5f595801--aaa5--42c7--b829--7a34a636407e-master (dm-13) 253:13 0 1G 0 lvm ********************************************************************************** [root@node002 shim]# multipath -v3 Jan 26 12:46:28 | ram0: device node name blacklisted Jan 26 12:46:28 | ram1: device node name blacklisted Jan 26 12:46:28 | ram2: device node name blacklisted Jan 26 12:46:28 | ram3: device node name blacklisted Jan 26 12:46:28 | ram4: device node name blacklisted Jan 26 12:46:28 | ram5: device node name blacklisted Jan 26 12:46:28 | ram6: device node name blacklisted Jan 26 12:46:28 | ram7: device node name blacklisted Jan 26 12:46:28 | ram8: device node name blacklisted Jan 26 12:46:28 | ram9: device node name blacklisted Jan 26 12:46:28 | ram10: device node name blacklisted Jan 26 12:46:28 | ram11: device node name blacklisted Jan 26 12:46:28 | ram12: device node name blacklisted Jan 26 12:46:28 | ram13: device node name blacklisted Jan 26 12:46:28 | ram14: device node name blacklisted Jan 26 12:46:28 | ram15: device node name blacklisted Jan 26 12:46:28 | loop0: device node name blacklisted Jan 26 12:46:28 | loop1: device node name blacklisted Jan 26 12:46:28 | loop2: device node name blacklisted Jan 26 12:46:28 | loop3: device node name blacklisted Jan 26 12:46:28 | loop4: device node name blacklisted Jan 26 12:46:28 | loop5: device node name blacklisted Jan 26 12:46:28 | loop6: device node name blacklisted Jan 26 12:46:28 | loop7: device node name blacklisted Jan 26 12:46:28 | sdb: not found in pathvec Jan 26 12:46:28 | sdb: mask = 0x3f Jan 26 12:46:28 | sdb: dev_t = 8:16 Jan 26 12:46:28 | sdb: size = 625142448 Jan 26 12:46:28 | sdb: subsystem = scsi Jan 26 12:46:28 | sdb: vendor = ATA Jan 26 12:46:28 | sdb: product = WDC WD3200AAJS-6 Jan 26 12:46:28 | sdb: rev = 03.0 Jan 26 12:46:28 | sdb: h:b:t:l = 10:0:0:0 Jan 26 12:46:28 | sdb: serial = WD-WMAV2HM46197 Jan 26 12:46:28 | sdb: get_state Jan 26 12:46:28 | sdb: path checker = directio (config file default) Jan 26 12:46:28 | sdb: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sdb: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sdb: state = 3 Jan 26 12:46:28 | sdb: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sdb: uid = 1ATA_WDC_WD3200AAJS-60Z0A0_WD-WMAV2HM46197 (callout) Jan 26 12:46:28 | sdb: state = running Jan 26 12:46:28 | sdb: detect_prio = 1 (config file default) Jan 26 12:46:28 | sdb: prio = const (config file default) Jan 26 12:46:28 | sdb: const prio = 1 Jan 26 12:46:28 | sda: not found in pathvec Jan 26 12:46:28 | sda: mask = 0x3f Jan 26 12:46:28 | sda: dev_t = 8:0 Jan 26 12:46:28 | sda: size = 3904897024 Jan 26 12:46:28 | sda: subsystem = scsi Jan 26 12:46:28 | sda: vendor = ATA Jan 26 12:46:28 | sda: product = MARVELL Raid VD Jan 26 12:46:28 | sda: rev = MV.R Jan 26 12:46:28 | sda: h:b:t:l = 0:0:0:0 Jan 26 12:46:28 | sda: serial = 1c3c8ecf5cf00010 Jan 26 12:46:28 | sda: get_state Jan 26 12:46:28 | sda: path checker = directio (config file default) Jan 26 12:46:28 | sda: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sda: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sda: state = 3 Jan 26 12:46:28 | sda: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sda: uid = 1ATA_MARVELL_Raid_VD_0_1c3c8ecf5cf00010 (callout) Jan 26 12:46:28 | sda: state = running Jan 26 12:46:28 | sda: detect_prio = 1 (config file default) Jan 26 12:46:28 | sda: prio = const (config file default) Jan 26 12:46:28 | sda: const prio = 1 Jan 26 12:46:28 | dm-0: device node name blacklisted Jan 26 12:46:28 | sdc: not found in pathvec Jan 26 12:46:28 | sdc: mask = 0x3f Jan 26 12:46:28 | sdc: dev_t = 8:32 Jan 26 12:46:28 | sdc: size = 0 Jan 26 12:46:28 | sdc: subsystem = scsi Jan 26 12:46:28 | sdc: vendor = Multi Jan 26 12:46:28 | sdc: product = Flash Reader Jan 26 12:46:28 | sdc: rev = 1.00 Jan 26 12:46:28 | sdc: h:b:t:l = 12:0:0:0 Jan 26 12:46:28 | dm-1: device node name blacklisted Jan 26 12:46:28 | dm-2: device node name blacklisted Jan 26 12:46:28 | dm-3: device node name blacklisted Jan 26 12:46:28 | sdd: not found in pathvec Jan 26 12:46:28 | sdd: mask = 0x3f Jan 26 12:46:28 | sdd: dev_t = 8:48 Jan 26 12:46:28 | sdd: size = 2048000000 Jan 26 12:46:28 | sdd: subsystem = scsi Jan 26 12:46:28 | sdd: vendor = SHIMI Jan 26 12:46:28 | sdd: product = VIRTUAL-DISK Jan 26 12:46:28 | sdd: rev = 0001 Jan 26 12:46:28 | sdd: h:b:t:l = 18:0:0:1 Jan 26 12:46:28 | sdd: tgt_node_name = pl.mycomp.shimi:node002.target0 Jan 26 12:46:28 | sdd: serial = beaf11 Jan 26 12:46:28 | sdd: get_state Jan 26 12:46:28 | sdd: path checker = directio (config file default) Jan 26 12:46:28 | sdd: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sdd: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sdd: state = 3 Jan 26 12:46:28 | sdd: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sdd: uid = 1NODE_002_LUN01 (callout) Jan 26 12:46:28 | sdd: state = running Jan 26 12:46:28 | sdd: detect_prio = 1 (config file default) Jan 26 12:46:28 | sdd: prio = const (config file default) Jan 26 12:46:28 | sdd: const prio = 1 Jan 26 12:46:28 | dm-4: device node name blacklisted Jan 26 12:46:28 | sde: not found in pathvec Jan 26 12:46:28 | sde: mask = 0x3f Jan 26 12:46:28 | sde: dev_t = 8:64 Jan 26 12:46:28 | sde: size = 1048576000 Jan 26 12:46:28 | sde: subsystem = scsi Jan 26 12:46:28 | sde: vendor = SHIMI Jan 26 12:46:28 | sde: product = VIRTUAL-DISK Jan 26 12:46:28 | sde: rev = 0001 Jan 26 12:46:28 | sde: h:b:t:l = 19:0:0:1 Jan 26 12:46:28 | sde: tgt_node_name = pl.mycomp.shimi:manager.target0 Jan 26 12:46:28 | sde: serial = beaf11 Jan 26 12:46:28 | sde: get_state Jan 26 12:46:28 | sde: path checker = directio (config file default) Jan 26 12:46:28 | sde: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sde: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sde: state = 3 Jan 26 12:46:28 | sde: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sde: uid = 1MANAGER_LUN01 (callout) Jan 26 12:46:28 | sde: state = running Jan 26 12:46:28 | sde: detect_prio = 1 (config file default) Jan 26 12:46:28 | sde: prio = const (config file default) Jan 26 12:46:28 | sde: const prio = 1 Jan 26 12:46:28 | sdf: not found in pathvec Jan 26 12:46:28 | sdf: mask = 0x3f Jan 26 12:46:28 | sdf: dev_t = 8:80 Jan 26 12:46:28 | sdf: size = 2048000000 Jan 26 12:46:28 | sdf: subsystem = scsi Jan 26 12:46:28 | sdf: vendor = SHIMI Jan 26 12:46:28 | sdf: product = VIRTUAL-DISK Jan 26 12:46:28 | sdf: rev = 0001 Jan 26 12:46:28 | sdf: h:b:t:l = 20:0:0:1 Jan 26 12:46:28 | sdf: tgt_node_name = pl.mycomp.shimi:node003.target0 Jan 26 12:46:28 | sdf: serial = beaf11 Jan 26 12:46:28 | sdf: get_state Jan 26 12:46:28 | sdf: path checker = directio (config file default) Jan 26 12:46:28 | sdf: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sdf: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sdf: state = 3 Jan 26 12:46:28 | sdf: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sdf: uid = 1NODE_003_LUN01 (callout) Jan 26 12:46:28 | sdf: state = running Jan 26 12:46:28 | sdf: detect_prio = 1 (config file default) Jan 26 12:46:28 | sdf: prio = const (config file default) Jan 26 12:46:28 | sdf: const prio = 1 Jan 26 12:46:28 | sdg: not found in pathvec Jan 26 12:46:28 | sdg: mask = 0x3f Jan 26 12:46:28 | sdg: dev_t = 8:96 Jan 26 12:46:28 | sdg: size = 2048000000 Jan 26 12:46:28 | sdg: subsystem = scsi Jan 26 12:46:28 | sdg: vendor = SHIMI Jan 26 12:46:28 | sdg: product = VIRTUAL-DISK Jan 26 12:46:28 | sdg: rev = 0001 Jan 26 12:46:28 | sdg: h:b:t:l = 21:0:0:1 Jan 26 12:46:28 | sdg: tgt_node_name = pl.mycomp.shimi:node001.target0 Jan 26 12:46:28 | sdg: serial = beaf11 Jan 26 12:46:28 | sdg: get_state Jan 26 12:46:28 | sdg: path checker = directio (config file default) Jan 26 12:46:28 | sdg: checker timeout = 30000 ms (sysfs setting) Jan 26 12:46:28 | sdg: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sdg: state = 3 Jan 26 12:46:28 | sdg: getuid = /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n (config file default) Jan 26 12:46:28 | sdg: uid = 1NODE_001_LUN01 (callout) Jan 26 12:46:28 | sdg: state = running Jan 26 12:46:28 | sdg: detect_prio = 1 (config file default) Jan 26 12:46:28 | sdg: prio = const (config file default) Jan 26 12:46:28 | sdg: const prio = 1 Jan 26 12:46:28 | dm-5: device node name blacklisted Jan 26 12:46:28 | dm-6: device node name blacklisted Jan 26 12:46:28 | dm-7: device node name blacklisted Jan 26 12:46:28 | dm-8: device node name blacklisted Jan 26 12:46:28 | dm-9: device node name blacklisted Jan 26 12:46:28 | dm-10: device node name blacklisted Jan 26 12:46:28 | dm-11: device node name blacklisted Jan 26 12:46:28 | dm-12: device node name blacklisted Jan 26 12:46:28 | dm-13: device node name blacklisted Jan 26 12:46:28 | dm-14: device node name blacklisted Jan 26 12:46:28 | dm-15: device node name blacklisted Jan 26 12:46:28 | dm-16: device node name blacklisted Jan 26 12:46:28 | dm-17: device node name blacklisted Jan 26 12:46:28 | dm-18: device node name blacklisted Jan 26 12:46:28 | dm-19: device node name blacklisted Jan 26 12:46:28 | dm-20: device node name blacklisted Jan 26 12:46:28 | dm-21: device node name blacklisted Jan 26 12:46:28 | dm-22: device node name blacklisted Jan 26 12:46:28 | dm-23: device node name blacklisted Jan 26 12:46:28 | dm-24: device node name blacklisted Jan 26 12:46:28 | dm-25: device node name blacklisted ===== paths list ===== uuid hcil dev dev_t pri dm_st chk_st 1ATA_WDC_WD3200AAJS-60Z0A0_WD-WMAV2HM46197 10:0:0:0 sdb 8:16 1 undef ready 1ATA_MARVELL_Raid_VD_0_1c3c8ecf5cf00010 0:0:0:0 sda 8:0 1 undef ready 12:0:0:0 sdc 8:32 -1 undef faulty 1NODE_002_LUN01 18:0:0:1 sdd 8:48 1 undef ready 1MANAGER_LUN01 19:0:0:1 sde 8:64 1 undef ready 1NODE_003_LUN01 20:0:0:1 sdf 8:80 1 undef ready 1NODE_001_LUN01 21:0:0:1 sdg 8:96 1 undef ready Jan 26 12:46:28 | params = 0 0 1 1 round-robin 0 1 1 8:96 1 Jan 26 12:46:28 | status = 2 0 0 0 1 1 A 0 1 0 8:96 A 0 Jan 26 12:46:28 | params = 0 0 1 1 round-robin 0 1 1 8:80 1 Jan 26 12:46:28 | status = 2 0 0 0 1 1 A 0 1 0 8:80 A 0 Jan 26 12:46:28 | params = 0 0 1 1 round-robin 0 1 1 8:48 1 Jan 26 12:46:28 | status = 2 0 0 0 1 1 A 0 1 0 8:48 A 0 Jan 26 12:46:28 | params = 0 0 1 1 round-robin 0 1 1 8:0 1 Jan 26 12:46:28 | status = 2 0 0 0 1 1 A 0 1 0 8:0 A 0 Jan 26 12:46:28 | params = 0 0 1 1 round-robin 0 1 1 8:64 1 Jan 26 12:46:28 | status = 2 0 0 0 1 1 A 0 1 0 8:64 A 0 Jan 26 12:46:28 | Found matching wwid [1ATA_WDC_WD3200AAJS-60Z0A0_WD-WMAV2HM46197] in bindings file. Setting alias to mpatha Jan 26 12:46:28 | sdb: ownership set to mpatha Jan 26 12:46:28 | sdb: not found in pathvec Jan 26 12:46:28 | sdb: mask = 0xc Jan 26 12:46:28 | sdb: get_state Jan 26 12:46:28 | sdb: state = running Jan 26 12:46:28 | directio: starting new request Jan 26 12:46:28 | directio: io finished 4096/0 Jan 26 12:46:28 | sdb: state = 3 Jan 26 12:46:28 | sdb: state = running Jan 26 12:46:28 | sdb: const prio = 1 Jan 26 12:46:28 | mpatha: pgfailover = -1 (internal default) Jan 26 12:46:28 | mpatha: pgpolicy = failover (internal default) Jan 26 12:46:28 | mpatha: selector = round-robin 0 (internal default) Jan 26 12:46:28 | mpatha: features = 0 (internal default) Jan 26 12:46:28 | mpatha: hwhandler = 0 (internal default) Jan 26 12:46:28 | mpatha: rr_weight = 1 (internal default) Jan 26 12:46:28 | mpatha: minio = 1 rq (config file default) Jan 26 12:46:28 | mpatha: no_path_retry = -1 (config file default) Jan 26 12:46:28 | pg_timeout = NONE (internal default) Jan 26 12:46:28 | mpatha: fast_io_fail_tmo = 5 (config file default) Jan 26 12:46:28 | mpatha: dev_loss_tmo = 30 (config file default) Jan 26 12:46:28 | mpatha: retain_attached_hw_handler = 1 (config file default) Jan 26 12:46:28 | failed to find rport_id for target10:0:0 Jan 26 12:46:28 | mpatha: set ACT_CREATE (map does not exist) Jan 26 12:46:28 | mpatha: domap (0) failure for create/reload map Jan 26 12:46:28 | mpatha: ignoring map ********************************************************************************** [root@node002 shim]# iscsiadm -m session -o show tcp: [6] 192.168.1.12:3260,1 pl.mycomp.shimi:node002.target0 tcp: [7] 192.168.1.11:3260,1 pl.mycomp.shimi:manager.target0 tcp: [8] 192.168.1.14:3260,1 pl.mycomp.shimi:node003.target0 tcp: [9] 192.168.1.13:3260,1 pl.mycomp.shimi:node001.target0 ********************************************************************************** [root@node002 shim]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ********************************************************************************** [root@node002 shim]# sestatus SELinux status: disabled

2 1

Re: [ovirt-users] OVF Storage
by Wolfgang Bucher 28 Jan '15

28 Jan '15

This is a multi-part message in MIME format. Your mail reader does not understand MIME message format. --=_2geOeZjYyDNsLh4GGdd9CgZIaHgb7fR7hTiJohLQERXFor+w Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Thanks=0D=0A=0D=0A=0D=0A=0D=0Ai think you don't need the logs anymore=0D=0A= =0D=0A=0D=0A=0D=0AGreetings=0D=0A=0D=0AWolfgang=0D=0A=0D=0A-----Urspr=C3=BC= ngliche Nachricht-----=0D=0AVon: Gilad Chaplik=C2=A0<gchaplik(a)redhat.com>= =0D=0AGesendet: Mit 28 Januar 2015 10:13=0D=0AAn: Maor Lipchuk <mlipchuk@= redhat.com>=0D=0ACC: Wolfgang Bucher <wolfgang.bucher(a)netland-mn.de>; use= rs(a)ovirt.org=0D=0ABetreff: Re: [ovirt-users] OVF Storage=0D=0A=0D=0A=0D=0A= ----- Original Message -----=0D=0A> From: "Maor Lipchuk" <mlipchuk@redhat= =2Ecom>=0D=0A> To: "Wolfgang Bucher" <wolfgang.bucher(a)netland-mn.de>=0D=0A= > Cc: users(a)ovirt.org=0D=0A> Sent: Wednesday, January 28, 2015 11:01:19 A= M=0D=0A> Subject: Re: [ovirt-users] OVF Storage=0D=0A>=20=0D=0A>=20=0D=0A= > ----- Original Message -----=0D=0A> > From: "Wolfgang Bucher" <wolfgang= =2Ebucher(a)netland-mn.de>=0D=0A> > To: users(a)ovirt.org=0D=0A> > Sent: Wedn= esday, January 28, 2015 9:01:45 AM=0D=0A> > Subject: Re: [ovirt-users] OV= F Storage=0D=0A> >=20=0D=0A> > AW: [ovirt-users] OVF Storage=0D=0A> >=20=0D= =0A> > Hello=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > whi= tch logs do you need. Attached a screenshot of the messages.=0D=0A>=20=0D= =0A> Hi wolfgang,=0D=0A>=20=0D=0A> The engine.log from your engine machin= e,=0D=0A> and the vdsm logs from your hosts should be enough for now.=0D=0A= >=20=0D=0A> Thanks,=0D=0A> Maor=0D=0A=0D=0AI'm aware of this bug and it's= reported by=20=0D=0Ahttps://bugzilla.redhat.com/1185615=0D=0A=0D=0A>=20=0D= =0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A= > >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > -----Urspr=C3=BCnglic= he Nachricht-----=0D=0A> > Von: Allon Mureinik <amureini(a)redhat.com>=0D=0A= > > Gesendet: Die 27 Januar 2015 23:01=0D=0A> > An: Wolfgang Bucher <wolf= gang.bucher(a)netland-mn.de>=0D=0A> > CC: users(a)ovirt.org; Liron Aravot <la= ravot(a)redhat.com>; Gilad Chaplik=0D=0A> > <gchaplik(a)redhat.com>=0D=0A> > = Betreff: Re: [ovirt-users] OVF Storage=0D=0A> >=20=0D=0A> > Wolfgang - ca= n you attach the exact message please=3F and preferably the=0D=0A> > logs= =3F=0D=0A> >=20=0D=0A> > Liron/Gilad - isn't this something we've fixed a= lready=3F=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > From: = "Wolfgang Bucher" <wolfgang.bucher(a)netland-mn.de>=0D=0A> > To: users@ovir= t.org=0D=0A> > Sent: Tuesday, January 27, 2015 10:23:46 PM=0D=0A> > Subje= ct: [ovirt-users] OVF Storage=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> = > Hello,=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > i have = create a new install of ovirt 3.51 on el7 with iscsi. All works fine=0D=0A= > > but i get every hour a message : Failed to create OVF store disk for=0D= =0A> > Storage=0D=0A> > Domain.=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A= > >=20=0D=0A> > any ideas=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20= =0D=0A> > greetings=0D=0A> >=20=0D=0A> > Wolfgang Bucher=0D=0A> >=20=0D=0A= > >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A>= >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > __________= _____________________________________=0D=0A> > Users mailing list=0D=0A> = > Users(a)ovirt.org=0D=0A> > http://lists.ovirt.org/mailman/listinfo/users=0D= =0A> >=20=0D=0A> >=20=0D=0A> > __________________________________________= _____=0D=0A> > Users mailing list=0D=0A> > Users(a)ovirt.org=0D=0A> > http:= //lists.ovirt.org/mailman/listinfo/users=0D=0A> >=0D=0A> ________________= _______________________________=0D=0A> Users mailing list=0D=0A> Users@ov= irt.org=0D=0A> http://lists.ovirt.org/mailman/listinfo/users=0D=0A>=0D=0A= =0D=0A --=_2geOeZjYyDNsLh4GGdd9CgZIaHgb7fR7hTiJohLQERXFor+w Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww= w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"= content=3D"Zarafa WebApp v7.1.10-44973">=0A <meta http-equiv=3D"Content= -Type" content=3D"text/html; charset=3Dutf-8">=0A <title>AW: [ovirt-user= s] OVF Storage</title>=0A</head>=0A<body>=0A<p style=3D"padding: 0; margi= n: 0;"><span style=3D"font-family: tahoma; font-size: 12pt;">Thanks</span= ></p>=0A<p style=3D"padding: 0; margin: 0;"><span style=3D"font-family: t= ahoma; font-size: 12pt;"><br /></span></p>=0A<p style=3D"padding: 0; marg= in: 0;"><span style=3D"font-family: tahoma; font-size: 12pt;">i think you= don't need the logs anymore</span></p>=0A<p style=3D"padding: 0; margin:= 0;"><span style=3D"font-family: tahoma; font-size: 12pt;"><br /></span><= /p>=0A<p style=3D"padding: 0; margin: 0;"><span style=3D"font-family: tah= oma; font-size: 12pt;">Greetings</span></p>=0A<p style=3D"padding: 0; mar= gin: 0;"><span style=3D"font-family: tahoma; font-size: 12pt;">Wolfgang</= span></p>=0A<div>=0A<blockquote style=3D"border-left: 2px solid #325FBA; = padding-left: 5px; margin: 0px 5px;"><span style=3D"font-family: tahoma,a= rial,helvetica,sans-serif; font-size: 10pt;">-----Ursprüngliche Nach= richt-----<br /><span><strong>Von:</strong> Gilad Chaplik <gchapl= ik(a)redhat.com></span><br /><span><strong>Gesendet:</strong> Mit 28 Jan= uar 2015 10:13</span><br /><span><strong>An:</strong> Maor Lipchuk <ml= ipchuk(a)redhat.com></span><br /><span><strong>CC:</strong> Wolfgang Buc= her <wolfgang.bucher(a)netland-mn.de>; users(a)ovirt.org</span><br /><s= pan><strong>Betreff:</strong> Re: [ovirt-users] OVF Storage</span><br /><= br /></span>=0A<div>=0A<pre style=3D"white-space: pre-wrap; word-wrap: br= eak-word;">----- Original Message -----<br />> From: "Maor Lipchuk" &l= t;mlipchuk(a)redhat.com><br />> To: "Wolfgang Bucher" <wolfgang.bu= cher(a)netland-mn.de><br />> Cc: users(a)ovirt.org<br />> Sent: Wedn= esday, January 28, 2015 11:01:19 AM<br />> Subject: Re: [ovirt-users] = OVF Storage<br />> <br />> <br />> ----- Original Message -----<= br />> > From: "Wolfgang Bucher" <wolfgang.bucher(a)netland-mn.de&= gt;<br />> > To: users(a)ovirt.org<br />> > Sent: Wednesday, Ja= nuary 28, 2015 9:01:45 AM<br />> > Subject: Re: [ovirt-users] OVF S= torage<br />> > <br />> > AW: [ovirt-users] OVF Storage<br />= > > <br />> > Hello<br />> > <br />> > <br />>= > <br />> > <br />> > whitch logs do you need. Attached a= screenshot of the messages.<br />> <br />> Hi wolfgang,<br />> = <br />> The engine.log from your engine machine,<br />> and the vds= m logs from your hosts should be enough for now.<br />> <br />> Tha= nks,<br />> Maor<br /><br />I'm aware of this bug and it's reported by= <br />https://bugzilla.redhat.com/1185615<br /><br />> <br />> &gt= ; <br />> > <br />> > <br />> > <br />> > <br />&= gt; > <br />> > <br />> > <br />> > <br />> > = <br />> > -----Ursprüngliche Nachricht-----<br />> > Von= : Allon Mureinik <amureini(a)redhat.com><br />> > Gesendet: Die= 27 Januar 2015 23:01<br />> > An: Wolfgang Bucher <wolfgang.buc= her(a)netland-mn.de><br />> > CC: users(a)ovirt.org; Liron Aravot &l= t;laravot(a)redhat.com>; Gilad Chaplik<br />> > <gchaplik@redha= t.com><br />> > Betreff: Re: [ovirt-users] OVF Storage<br />>= > <br />> > Wolfgang - can you attach the exact message please=3F= and preferably the<br />> > logs=3F<br />> > <br />> >= Liron/Gilad - isn't this something we've fixed already=3F<br />> >= <br />> > <br />> > <br />> > <br />> > From: "W= olfgang Bucher" <wolfgang.bucher(a)netland-mn.de><br />> > To: = users(a)ovirt.org<br />> > Sent: Tuesday, January 27, 2015 10:23:46 P= M<br />> > Subject: [ovirt-users] OVF Storage<br />> > <br />= > > <br />> > <br />> > Hello,<br />> > <br />&gt= ; > <br />> > <br />> > <br />> > i have create a ne= w install of ovirt 3.51 on el7 with iscsi. All works fine<br />> > = but i get every hour a message : Failed to create OVF store disk for<br /= >> > Storage<br />> > Domain.<br />> > <br />> > = <br />> > <br />> > <br />> > any ideas<br />> > = <br />> > <br />> > <br />> > <br />> > greetings= <br />> > <br />> > Wolfgang Bucher<br />> > <br />>= > <br />> > <br />> > <br />> > <br />> > <br= />> > <br />> > <br />> > <br />> > <br />> &= gt; <br />> > <br />> > _____________________________________= __________<br />> > Users mailing list<br />> > Users(a)ovirt.o= rg<br />> > http://lists.ovirt.org/mailman/listinfo/users<br />>= > <br />> > <br />> > ___________________________________= ____________<br />> > Users mailing list<br />> > Users@ovirt= =2Eorg<br />> > http://lists.ovirt.org/mailman/listinfo/users<br />= > ><br />> _______________________________________________<br />= > Users mailing list<br />> Users(a)ovirt.org<br />> http://lists.= ovirt.org/mailman/listinfo/users<br />><br /></pre>=0A</div>=0A</block= quote>=0A</div>=0A</body>=0A</html> --=_2geOeZjYyDNsLh4GGdd9CgZIaHgb7fR7hTiJohLQERXFor+w--

1 0

MaxVmNameLengthNonWindows not set right ?
by Matt . 28 Jan '15

28 Jan '15

Hi, My VM doesn' t want to start because the vdsm host says it's over 45 characters or so. This is set: # engine-config -g MaxVmNameLengthNonWindows MaxVmNameLengthNonWindows: 64 version: general But when I set it to 80 it also doesn't start. What goes wrong here ? It's a Linux VM. Thanks, Matt

2 1

Re: [ovirt-users] change network MTU settings without taking all the VMs down?
by Martin Pavlík 28 Jan '15

28 Jan '15

Hi Darell, you could switch the vNICs to different/empty network for a while. Or if possible you can just shut down the VMs that should do the trick as well. HTH Martin Pavlik RHEV QE > On 27 Jan 2015, at 21:59, Donny Davis <donny(a)cloudspin.me> wrote: > > I'm on the same.. And I see the issue. Why don't you create a new network with the correct parameters and then move the network the VM is attached to > > On Jan 27, 2015 1:39 PM, Darrell Budic <budic(a)onholyground.com> wrote: >> >> Try changing that custom MTU and hitting OK. I get: >> >> on 3.5 and 3.5.1. What version are you running? >> >>> On Jan 27, 2015, at 2:04 PM, Donny Davis <donny(a)cloudspin.me> wrote: >>> >>> Maybe I missed your question, but I can change the MTU from the gui without any problems. As long as you make sure there are not any vm's on the host you are trying to sync, I have experienced no issues. >>> >>> Donny >>> >>> -----Original Message----- >>> From: Darrell Budic [mailto:budic@onholyground.com] >>> Sent: Tuesday, January 27, 2015 12:30 PM >>> To: Donny Davis >>> Cc: users(a)ovirt.org >>> Subject: Re: [ovirt-users] change network MTU settings without taking all the VMs down? >>> >>> Except you can’t change the network MTU setting in the first place on the network in the GUI. I’ve thought about doing it in the database, with a migration as you mention. Just checking first for better options :) >>> >>> >>>> On Jan 27, 2015, at 12:08 PM, Donny Davis <donny(a)cloudspin.me> wrote: >>>> >>>> Migrate the vms between hosts, and when a host gets to no running VMS you can sync that network. >>>> >>>> Donny D >>>> cloudspin.meOn Jan 27, 2015 10:43 AM, Darrell Budic <budic(a)onholyground.com> wrote: >>>>> >>>>> >>>>> I finally got a couple of networks our from behind a wan based layer 2 bridge that required me to run at MTU 1448, and would like to get back up to MTU 1500. I see the GUI won’t let me do that while the network is in use. Any way around this, clean or otherwise? Restarting VMs to update them is ok, just trying to avoid having to take everything down at the same time. >>>>> >>>>> -Darrell >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> <Capture.PNG> >> >> > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

1 0

gluster only hosts managed by oVirt?
by Jorick Astrego 28 Jan '15

28 Jan '15

This is a multi-part message in MIME format. ------------MIME-729234773-709046645-delim Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C We are currently testing a setup with dedicated gluster servers and dedicated compute nodes without disks=2E For both we provision some custom os install and configuration=2E Currently I am only able to manage and view gluster volumes from ovirt when the =22Enable Gluster Service=22 is enabled for the Cluster=2E Right= =3F There is a =22Enable Virt Service=22 flag but the options is selected and= greyed out=2E So I=27m not able to disable it=2E Can I have gluster only hosts managed through the oVirt admin interface=2C= without all the virtualization stuff installed on them=3F Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- ------------MIME-729234773-709046645-delim Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Cbody=3E Hi,<br> <br> We are currently testing a setup with dedicated gluster servers and<br= > dedicated compute nodes without disks.<br> <br> For both we provision some custom os install and configuration.<br> Currently I am only able to manage and view gluster volumes from ovirt= <br> when the "Enable Gluster Service" is enabled for the Cluster. Rig= ht?<br> <br> There is a "Enable Virt Service" flag but the options is selected= and<br> greyed out. So I'm not able to disable it.<br> <br> Can I have gluster only hosts managed through the oVirt admin interface,&#1= 3;<br> without all the virtualization stuff installed on them?<br> <br> <br> <br> = =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E ------------MIME-729234773-709046645-delim--

4 5

[QE][ACTION REQUIRED] oVirt 3.6.0 status
by Sandro Bonazzola 28 Jan '15

28 Jan '15

Hi, I haven't many news for 3.6 this week: ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [1] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 22: 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 QEMU 2.3.0: 2015-03-27 The tracker bug for 3.6.0 [2] currently shows no blockers. There are 530 bugs [3] targeted to 3.6.0. Excluding node and documentation bugs we have 489 bugs [4] targeted to 3.6.0. [1] http://goo.gl/9X3G49 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [3] https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_release%3A3.6.0%… [4] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

How to disable SSL for oVirt webadmin and userportal??
by greatboy fish 28 Jan '15

28 Jan '15

Dear Sir, When I connecting to the http://ovirt_FQDN/ovirt-engine/ , then I can see link of "User Portal" and "Administration Portal". But when I click either of one link, it will be redirect to http*s*://ovirt_FQDN/ovirt-engine/userportal/?locale=en_US#login or http*s*://ovirt_FQDN/ovirt-engine/webadmin/?locale=en_US#login. I don't want to connect via https, please teach me how to disable SSL for oVirt webadmin and userportal(or not to redirect to https)??

2 1