- Users - oVirt List Archives

Re: [ovirt-users] FC QLogic question
by Bill Dossett 12 Sep '14

12 Sep '14

Sorry for delay in replying on this, I got pulled into some urgent meetings at the end of the day. Regarding the questions below, Yes under the H/W tab my QLogic cards are listed. Looks like I have two different models of cards, which could be, I think I acquired them off ebay and then got another one later for redundancy. WWNN and WWPNs are listed. Miultipath -ll lists all my LUNs, multipathing is set to RR... not sure if that could be problem as the SAN I am using (old EMC/DGC CX200) is active passive and I would assume it would be MRU... Hope this helps, still no LUNs showing up in my Engine. Thanks again for your help. Bill -----Original Message----- From: Daniel Helgenberger [mailto:daniel.helgenberger@m-box.de] Sent: 11 September 2014 13:06 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 13:05, Bill Dossett wrote: > Hi Daniel, > > I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? > > [root@ovirt141 ~]# lsmod | grep qla > qla2xxx 466573 56 > > I think that is the one Indeed, sorry for that. > > lsscsi does list all of the LUNs... so that's working! Great! > > But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? > > Thanks again, I guess I will try and get a bit further with the installs I have... > > Bill > > > > -----Original Message----- > From: Daniel Helgenberger [mailto:daniel.helgenberger@m-box.de] > Sent: 11 September 2014 11:53 > To: Bill Dossett > Subject: Re: [ovirt-users] FC QLogic question > > On 11.09.2014 12:17, Bill Dossett wrote: >> Thanks for responding Daniel. > Never mind! >> I was wondering and thought the message may be irrelevant. But yes, >> it doesn't appear to be working. When I try to add a FC storage >> domain, no hosts are showing in the drop down box of hosts. I have >> loaded the latests ovirtnode (3.4.something...) on two hosts now and >> neither are working. > Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). > Please try a: > # lsmod | grep qxl > to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. > > Further check on the FC switch if the N port is logged in and the zoning is correct. > > Finally, check with > # lsscsi > if you can see the luns. > >> Also having a lot of issues with configuring the network. I >> configure an interface I can ping it, but it shows as unconfigured... >> on one host I have added it to the manager and I see the interfaces >> anyway, but on the second host I configure the eth0, I can ping it, >> it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? >> >> thanks again and best regards. >> >> >> *Bill Dossett* >> *Virtualisation Architect* >> *Pitney Bowes - Tech Central*** >> 6 Hercules Way, 600 Leavesden Park >> Watford, WD25 7GS >> Phone(+44) (0)1923 279353 | VOIP: 54739353 >> Mobile(+44) (0)7775 908612 >> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> www.pb.com >> <http://www.pb.com/> *In Engineering?**Raise a ticket via Remedy >> Anywhere [HERE >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Inciden >> t >> /newIncident.aspx>]takes >> less than a minute* >> >> *ManageIQ User Guide available* [*HERE >> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%2 >> 0 v4.pdf>*] *Check out the ManageIQ Blog for recent enhancements and >> information [HERE] >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx> >> * >> >> On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger >> <daniel.helgenberger(a)m-box.de <mailto:daniel.helgenberger@m-box.de>> wrote: >> >>> Hello Bill, >>> >>> what are your problems acually? Is fibre channel not working (as expected)? >>> >>> The log snippet you provided is completly normal and the messages >>> can safely be ignored. This is also unrelated to oVirt but rather >>> CentOS (or the distro you are running) I suppose. >>> >>> Cheers! >>> >>> On 11.09.2014 10:51, Bill Dossett wrote: >>>> Hi, >>>> >>>> I seem to have run into a problem setting up ovirt with Fibre Channel storage. >>>> >>>> I have a 2MBs SAN and qlogic cards in the nodes. I used this same >>>> setup with RHEV about 6 months ago and it just worked, storage was >>>> there no problems. Now booting with ovirtnode distro, I am seeing >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: >>>> Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. >>>> >>>> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: >>>> QLogic QLE2460 >>>> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: >>>> ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). >>>> >>>> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A >>>> -> GSI 16 (level, low) -> IRQ 16 >>>> >>>> I have googled the firmware error and it says some cards need a >>>> firmware flash and some don't. These are pretty standard HBAs so I >>>> would think they would be supported out of the box, but maybe not. >>>> Looking at trying to add the firmware looked kind of complex - if I >>>> need to do this, does anyone know of a nice and easy howto guide on >>>> this. I'm just getting started with ovirt and appreciate any help >>>> >>>> >>>> Thanks >>>> >>>> *Bill Dossett* >>>> >>>> *Virtualisation Architect* >>>> >>>> *Pitney Bowes - Tech Central*** >>>> >>>> 6 Hercules Way, 600 Leavesden Park >>>> >>>> Watford, WD25 7GS >>>> >>>> Phone(+44) (0)1923 279353 | VOIP: 54739353 >>>> >>>> Mobile(+44) (0)7775 908612 >>>> >>>> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> >>>> <mailto:bill.dossett@pb.com> >>>> >>>> www.pb.com <http://www.pb.com> <http://www.pb.com/> >>>> >>>> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE >>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid >>>> ent/newIncident.aspx>]takes >>>> >>>> less than a minute* >>>> >>>> *ManageIQ User Guide available*[*HERE >>>> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB >>>> %20v4.pdf>*] >>>> >>>> *Check out the ManageIQ Blog for recent enhancements and >>>> information [HERE] >>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.asp >>>> x>* >>>> >>>> >>>> ------------------------------------------------------------------- >>>> ------------- >>>> >>> -- >>> Daniel Helgenberger >>> m box bewegtbild GmbH >>> >>> P: +49/30/2408781-22 >>> F: +49/30/2408781-10 >>> >>> ACKERSTR. 19 >>> D-10115 BERLIN >>> >>> >>> www.m-box.de <http://www.m-box.de> www.monkeymen.tv >>> <http://www.monkeymen.tv> >>> >>> Geschäftsführer: Martin Retschitzegger / Michaela Göllner >>> Handeslregister: Amtsgericht Charlottenburg / HRB 112767 >>> >> >> --------------------------------------------------------------------- >> - >> ---------- >> > -- > Daniel Helgenberger > m box bewegtbild GmbH > > P: +49/30/2408781-22 > F: +49/30/2408781-10 > > ACKERSTR. 19 > D-10115 BERLIN > > > www.m-box.de www.monkeymen.tv > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > Handeslregister: Amtsgericht Charlottenburg / HRB 112767 > > > ________________________________ > > -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ________________________________

1 0

Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 3.5.0 Second Release Candidate is now available for testing
by Doron Fediuck 11 Sep '14

11 Sep '14

----_com.android.email_1995386512830700 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 V2VsbCBkb25lIcKgCgotLS0tLS0tLSBPcmlnaW5hbCBtZXNzYWdlIC0tLS0tLS0tCkZyb206IFNh bmRybyBCb25henpvbGEgPHNib25henpvQHJlZGhhdC5jb20+IApEYXRlOjExLzA5LzIwMTQgIDE4 OjU1ICAoR01UKzAyOjAwKSAKVG86IGFubm91bmNlQG92aXJ0Lm9yZyxkZXZlbEBvdmlydC5vcmcs VXNlcnNAb3ZpcnQub3JnIApTdWJqZWN0OiBbb3ZpcnQtYW5ub3VuY2VdIFtBTk5dIG9WaXJ0IDMu NS4wIFNlY29uZCBSZWxlYXNlIENhbmRpZGF0ZSBpcyBub3cJYXZhaWxhYmxlIGZvciB0ZXN0aW5n IAoKVGhlIG9WaXJ0IHRlYW0gaXMgcGxlYXNlZCB0byBhbm5vdW5jZSB0aGF0IHRoZSAzLjUuMCBT ZWNvbmQgUmVsZWFzZSBDYW5kaWRhdGUgaXMgbm93CmF2YWlsYWJsZSBmb3IgdGVzdGluZyBhcyBv ZiBTZXAgMTF0aCAyMDE0LgoKVGhlIHJlbGVhc2UgY2FuZGlkYXRlIGlzIGF2YWlsYWJsZSBub3cg Zm9yIEZlZG9yYSAxOSwgRmVkb3JhIDIwIGFuZCBSZWQgSGF0IEVudGVycHJpc2UgTGludXggNi41 CihvciBzaW1pbGFyKSBhbmQgYWxsb3cgeW91IHRvIHVzZSBSZWQgSGF0IEVudGVycHJpc2UgTGlu dXggNyBhcyBub2RlIGFuZCBydW4gSG9zdGVkIEVuZ2luZS4KCkZlZWwgZnJlZSB0byBqb2luIHVz IHRlc3RpbmcgaXQgb24gVHVlIDIwMTQtMDktMTYgdGhpcmQgdGVzdCBkYXkhCgpUaGlzIHJlbGVh c2Ugb2Ygb1ZpcnQgaW5jbHVkZXMgbnVtZXJvdXMgYnVnIGZpeGVzLgpTZWUgdGhlIHJlbGVhc2Ug bm90ZXMgWzFdIGZvciBhIGxpc3Qgb2YgdGhlIG5ldyBmZWF0dXJlcyBhbmQgYnVncyBmaXhlZC4K ClRoZSBleGlzdGluZyByZXBvc2l0b3J5IG92aXJ0LTMuNS1wcmUgaGFzIGJlZW4gdXBkYXRlZCBm b3IgZGVsaXZlcmluZyB0aGlzCnJlbGVhc2Ugd2l0aG91dCB0aGUgbmVlZCBvZiBlbmFibGluZyBh bnkgb3RoZXIgcmVwb3NpdG9yeS4KSWYgeW91J3JlIGFscmVhZHkgdXNpbmcgb1ZpcnQgMy41IHJl cG9zaXRvcnksIHBsZWFzZSB1cGRhdGUgb3ZpcnQtcmVsZWFzZTM1IHJwbS4KClBsZWFzZSByZWZl ciB0byByZWxlYXNlIG5vdGVzIFsxXSBmb3IgSW5zdGFsbGF0aW9uIC8gVXBncmFkZSBpbnN0cnVj dGlvbnMuCk5ldyBvVmlydCBMaXZlLCBvVmlydCBHdWVzdCBUb29scyBhbmQgb1ZpcnQgTm9kZSBJ U08gd2lsbCBiZSBhdmFpbGFibGUgc29vbiBhcyB3ZWxsWzJdLgoKUGxlYXNlIG5vdGUgdGhhdCBt aXJyb3JzIG1heSBuZWVkIHVzdWFsbHkgb25lIGRheSBiZWZvcmUgYmVpbmcgc3luY2hyb25pemVk LgpJZiB5b3Ugd2FudCB0byBiZSBzdXJlIHRvIHVzZSBsYXRlc3QgcnBtcyBhbmQgZG9uJ3Qgd2Fu dCB0byB3YWl0IGZvciB0aGUgbWlycm9ycywKeW91IGNhbiBlZGl0IC9ldGMveXVtLnJlcG9zLmQv b3ZpcnQtMy41LnJlcG8gY29tbWVudGluZyB0aGUgbWlycm9yIGxpbmUgYW5kCnJlbW92aW5nIHRo ZSBjb21tZW50IG9uIGJhc2V1cmwgbGluZS4KClBsZWFzZSByZWZlciB0byB0aGUgcmVsZWFzZSBu b3RlcyBmb3Iga25vd24gaXNzdWVzIGluIHRoaXMgcmVsZWFzZS4KClsxXSBodHRwOi8vd3d3Lm92 aXJ0Lm9yZy9PVmlydF8zLjVfUmVsZWFzZV9Ob3RlcwpbMl0gaHR0cDovL3Jlc291cmNlcy5vdmly dC5vcmcvcHViL292aXJ0LTMuNS1wcmUvaXNvLwoKLS0gClNhbmRybyBCb25henpvbGEKQmV0dGVy IHRlY2hub2xvZ3kuIEZhc3RlciBpbm5vdmF0aW9uLiBQb3dlcmVkIGJ5IGNvbW11bml0eSBjb2xs YWJvcmF0aW9uLgpTZWUgaG93IGl0IHdvcmtzIGF0IHJlZGhhdC5jb20KX19fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18KQW5ub3VuY2UgbWFpbGluZyBsaXN0CkFu bm91bmNlQG92aXJ0Lm9yZwpodHRwOi8vbGlzdHMub3ZpcnQub3JnL21haWxtYW4vbGlzdGluZm8v YW5ub3VuY2UKCg== ----_com.android.email_1995386512830700 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5XZWxsIGRvbmUhJm5ic3A7 PC9kaXY+PGJyPjxicj4tLS0tLS0tLSBPcmlnaW5hbCBtZXNzYWdlIC0tLS0tLS0tPGJyPkZyb206 IFNhbmRybyBCb25henpvbGEgPHNib25henpvQHJlZGhhdC5jb20+IDxicj5EYXRlOjExLzA5LzIw MTQgIDE4OjU1ICAoR01UKzAyOjAwKSA8YnI+VG86IGFubm91bmNlQG92aXJ0Lm9yZyxkZXZlbEBv dmlydC5vcmcsVXNlcnNAb3ZpcnQub3JnIDxicj5TdWJqZWN0OiBbb3ZpcnQtYW5ub3VuY2VdIFtB Tk5dIG9WaXJ0IDMuNS4wIFNlY29uZCBSZWxlYXNlIENhbmRpZGF0ZSBpcyBub3cJYXZhaWxhYmxl IGZvciB0ZXN0aW5nIDxicj48YnI+VGhlIG9WaXJ0IHRlYW0gaXMgcGxlYXNlZCB0byBhbm5vdW5j ZSB0aGF0IHRoZSAzLjUuMCBTZWNvbmQgUmVsZWFzZSBDYW5kaWRhdGUgaXMgbm93PGJyPmF2YWls YWJsZSBmb3IgdGVzdGluZyBhcyBvZiBTZXAgMTF0aCAyMDE0Ljxicj48YnI+VGhlIHJlbGVhc2Ug Y2FuZGlkYXRlIGlzIGF2YWlsYWJsZSBub3cgZm9yIEZlZG9yYSAxOSwgRmVkb3JhIDIwIGFuZCBS ZWQgSGF0IEVudGVycHJpc2UgTGludXggNi41PGJyPihvciBzaW1pbGFyKSBhbmQgYWxsb3cgeW91 IHRvIHVzZSBSZWQgSGF0IEVudGVycHJpc2UgTGludXggNyBhcyBub2RlIGFuZCBydW4gSG9zdGVk IEVuZ2luZS48YnI+PGJyPkZlZWwgZnJlZSB0byBqb2luIHVzIHRlc3RpbmcgaXQgb24gVHVlIDIw MTQtMDktMTYgdGhpcmQgdGVzdCBkYXkhPGJyPjxicj5UaGlzIHJlbGVhc2Ugb2Ygb1ZpcnQgaW5j bHVkZXMgbnVtZXJvdXMgYnVnIGZpeGVzLjxicj5TZWUgdGhlIHJlbGVhc2Ugbm90ZXMgWzFdIGZv ciBhIGxpc3Qgb2YgdGhlIG5ldyBmZWF0dXJlcyBhbmQgYnVncyBmaXhlZC48YnI+PGJyPlRoZSBl eGlzdGluZyByZXBvc2l0b3J5IG92aXJ0LTMuNS1wcmUgaGFzIGJlZW4gdXBkYXRlZCBmb3IgZGVs aXZlcmluZyB0aGlzPGJyPnJlbGVhc2Ugd2l0aG91dCB0aGUgbmVlZCBvZiBlbmFibGluZyBhbnkg b3RoZXIgcmVwb3NpdG9yeS48YnI+SWYgeW91J3JlIGFscmVhZHkgdXNpbmcgb1ZpcnQgMy41IHJl cG9zaXRvcnksIHBsZWFzZSB1cGRhdGUgb3ZpcnQtcmVsZWFzZTM1IHJwbS48YnI+PGJyPlBsZWFz ZSByZWZlciB0byByZWxlYXNlIG5vdGVzIFsxXSBmb3IgSW5zdGFsbGF0aW9uIC8gVXBncmFkZSBp bnN0cnVjdGlvbnMuPGJyPk5ldyBvVmlydCBMaXZlLCBvVmlydCBHdWVzdCBUb29scyBhbmQgb1Zp cnQgTm9kZSBJU08gd2lsbCBiZSBhdmFpbGFibGUgc29vbiBhcyB3ZWxsWzJdLjxicj48YnI+UGxl YXNlIG5vdGUgdGhhdCBtaXJyb3JzIG1heSBuZWVkIHVzdWFsbHkgb25lIGRheSBiZWZvcmUgYmVp bmcgc3luY2hyb25pemVkLjxicj5JZiB5b3Ugd2FudCB0byBiZSBzdXJlIHRvIHVzZSBsYXRlc3Qg cnBtcyBhbmQgZG9uJ3Qgd2FudCB0byB3YWl0IGZvciB0aGUgbWlycm9ycyw8YnI+eW91IGNhbiBl ZGl0IC9ldGMveXVtLnJlcG9zLmQvb3ZpcnQtMy41LnJlcG8gY29tbWVudGluZyB0aGUgbWlycm9y IGxpbmUgYW5kPGJyPnJlbW92aW5nIHRoZSBjb21tZW50IG9uIGJhc2V1cmwgbGluZS48YnI+PGJy PlBsZWFzZSByZWZlciB0byB0aGUgcmVsZWFzZSBub3RlcyBmb3Iga25vd24gaXNzdWVzIGluIHRo aXMgcmVsZWFzZS48YnI+PGJyPlsxXSBodHRwOi8vd3d3Lm92aXJ0Lm9yZy9PVmlydF8zLjVfUmVs ZWFzZV9Ob3Rlczxicj5bMl0gaHR0cDovL3Jlc291cmNlcy5vdmlydC5vcmcvcHViL292aXJ0LTMu NS1wcmUvaXNvLzxicj48YnI+LS0gPGJyPlNhbmRybyBCb25henpvbGE8YnI+QmV0dGVyIHRlY2hu b2xvZ3kuIEZhc3RlciBpbm5vdmF0aW9uLiBQb3dlcmVkIGJ5IGNvbW11bml0eSBjb2xsYWJvcmF0 aW9uLjxicj5TZWUgaG93IGl0IHdvcmtzIGF0IHJlZGhhdC5jb208YnI+X19fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX188YnI+QW5ub3VuY2UgbWFpbGluZyBsaXN0 PGJyPkFubm91bmNlQG92aXJ0Lm9yZzxicj5odHRwOi8vbGlzdHMub3ZpcnQub3JnL21haWxtYW4v bGlzdGluZm8vYW5ub3VuY2U8ZGl2Pjxicj48L2Rpdj48L2JvZHk+ ----_com.android.email_1995386512830700--

1 0

FC QLogic question
by Bill Dossett 11 Sep '14

11 Sep '14

--_000_B47F00825D68444ABC0373307827536037115916013BR1MPN1012MG_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, I seem to have run into a problem setting up ovirt with Fibre Channel stora= ge. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup wi= th RHEV about 6 months ago and it just worked, storage was there no problem= s. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware i= mages can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic QLE= 2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: P= CIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=3D1 fw=3D4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 1= 6 (level, low) -> IRQ 16 I have googled the firmware error and it says some cards need a firmware fl= ash and some don't. These are pretty standard HBAs so I would think they w= ould be supported out of the box, but maybe not. Looking at trying to add = the firmware looked kind of complex - if I need to do this, does anyone kno= w of a nice and easy howto guide on this. I'm just getting started with ov= irt and appreciate any help Thanks Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.dossett(a)pb.com<mailto:bill.dossett@pb.com> www.pb.com<http://www.pb.com/> In Engineering? Raise a ticket via Remedy Anywhere [HERE<http://teamsite.in= side.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx>] take= s less than a minute ManageIQ User Guide available [HERE<https://dl.dropbox.com/u/6219441/Manage= IQ%20-%20User%20Manual%20PB%20v4.pdf>] Check out the ManageIQ Blog for recent enhancements and information [HERE]<= http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx> ________________________________ --_000_B47F00825D68444ABC0373307827536037115916013BR1MPN1012MG_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> Hi,<o:p></o:p> <o:p> </o:p> I seem to have run into a problem setting up ovirt w= ith Fibre Channel storage.<o:p></o:p> <o:p> </o:p> I have a 2MBs SAN and qlogic cards in the nodes.&nbs= p; I used this same setup with RHEV about 6 months ago and it just worked, = storage was there no problems.  Now booting with ovirtnode distro, I a= m seeing<o:p></o:p> <o:p> </o:p> Sep  9 08:01:27 localhost kernel: qla2xxx [0000= :0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlo= gic.com/firmware/.<o:p></o:p> Sep  9 08:01:27 localhost kernel: scsi1 : qla2x= xx<o:p></o:p> Sep  9 08:01:27 localhost kernel: qla2xxx [0000= :0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for = IBM System x.<o:p></o:p> Sep  9 08:01:27 localhost kernel: qla2xxx [0000= :0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#= =3D1 fw=3D4.00.26 (2).<o:p></o:p> Sep  9 08:01:27 localhost kernel: ata_piix 0000= :00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16<o:p></o:p> <o:p> </o:p> I have googled the firmware error and it says some c= ards need a firmware flash and some don’t.  These are pretty sta= ndard HBAs so I would think they would be supported out of the box, but may= be not.  Looking at trying to add the firmware looked kind of complex – if I need to do this, does anyone know of a= nice and easy howto guide on this.  I’m just getting started wi= th ovirt and appreciate  any help<o:p></o:p> Thanks<o:p></o:p> <o:p> </o:p> <table class=3D"MsoNormalTable" border=3D"0" cellspacing=3D"0" cellpadding= =3D"0" style=3D"border-collapse:collapse"> <tbody> <tr> <td width=3D"596" style=3D"width:447.0pt;padding:0cm 0cm 0cm 0cm"> Bill Dossett<o:p></o= :p> Virtualisation Archi= tect<o:p><= /o:p> </td> </tr> <tr> <td width=3D"596" style=3D"width:447.0pt;padding:0cm 0cm 0cm 0cm"> Pitney Bowes –= Tech Central<o:p></o:p> 6 Hercules Way, 600 Lea= vesden Park<o:p></o:p> Watford, WD25 7GS</span= ><o:p></o:p> </td> </tr> <tr> <td width=3D"596" style=3D"width:447.0pt;padding:0cm 0cm 0cm 0cm"> Phone (+44) (0)1923= 279353 | VOIP: 54739353<o:p></o:p> Mobile (+44) (0)7775= 908612<o:p></o:p= > </td> </tr> <tr> <td width=3D"596" style=3D"width:447.0pt;padding:0cm 0cm 0cm 0cm"> <a href=3D"mailto:bill.= dossett(a)pb.com">bill.dossett(a)pb.com</a></= span><o:p></o:p><= /p> <a href=3D"http://www.p= b.com/">www.pb.com</a> <o:p></o:p> <o:p> </o:p></span= > In Engineering?<span= style=3D"font-size:10.0pt;font-family:"Verdana","sans-serif= ";mso-fareast-language:EN-GB"> Raise a ticket via Remedy Anywhere [<a href=3D"http://teamsite.inside.pb= .com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx">HERE</a>] takes less than a minute</spa= n><o:p></o:p></p= > </td> </tr> </tbody> </table> <o:p> </o:p> ManageIQ = User Guide available [<b= ><a href=3D"https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%2= 0PB%20v4.pdf">HERE</a>]<o:p></o:p></s= pan> <o:p>&nbs= p;</o:p> Check out= the ManageIQ Blog for recent enhancements and information <a href=3D"http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.a= spx">[HERE]</a><o:p></o:p> <o:p> </o:p> <o:p> </o:p> </div> <hr> </body> </html> --_000_B47F00825D68444ABC0373307827536037115916013BR1MPN1012MG_--

3 4

How to import vm template
by John Xue 11 Sep '14

11 Sep '14

Hi, All I have configured an export NFS storage on old ovirt and export a vm template succeed. But how to import it to another new ovirt? -- Regards, John Xue

2 1

Fwd: FC QLogic question
by Bill Dossett 11 Sep '14

11 Sep '14

> > Hi Daniel, > > I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? > > [root@ovirt141 ~]# lsmod | grep qla > qla2xxx 466573 56 > > I think that is the one > > lsscsi does list all of the LUNs... so that's working! > > But nothing in ovirt engine when I try to add a storage domain. > > Thanks again, I guess I will try and get a bit further with the installs I have... > > Bill > > > > -----Original Message----- > From: Daniel Helgenberger [mailto:daniel.helgenberger@m-box.de] > Sent: 11 September 2014 11:53 > To: Bill Dossett > Subject: Re: [ovirt-users] FC QLogic question > > On 11.09.2014 12:17, Bill Dossett wrote: >> Thanks for responding Daniel. > Never mind! >> I was wondering and thought the message may be irrelevant. But yes, >> it doesn't appear to be working. When I try to add a FC storage >> domain, no hosts are showing in the drop down box of hosts. I have >> loaded the latests ovirtnode (3.4.something.) on two hosts now and >> neither are working. > Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). > Please try a: > # lsmod | grep qxl > to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. > > Further check on the FC switch if the N port is logged in and the zoning is correct. > > Finally, check with > # lsscsi > if you can see the luns. > >> Also having a lot of issues with configuring the network. I configure >> an interface I can ping it, but it shows as unconfigured. on one host >> I have added it to the manager and I see the interfaces anyway, but on >> the second host I configure the eth0, I can ping it, it added to the >> ovirt engine but it shows no NICs. Should I be using an earlier version maybe? >> >> thanks again and best regards. >> >> >> *Bill Dossett* >> *Virtualisation Architect* >> *Pitney Bowes - Tech Central*** >> 6 Hercules Way, 600 Leavesden Park >> Watford, WD25 7GS >> Phone(+44) (0)1923 279353 | VOIP: 54739353 >> Mobile(+44) (0)7775 908612 >> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> www.pb.com >> <http://www.pb.com/> *In Engineering?**Raise a ticket via Remedy >> Anywhere [HERE >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident >> /newIncident.aspx>]takes >> less than a minute* >> >> *ManageIQ User Guide available* [*HERE >> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 >> v4.pdf>*] *Check out the ManageIQ Blog for recent enhancements and >> information [HERE] >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* >> >> On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger >> <daniel.helgenberger(a)m-box.de <mailto:daniel.helgenberger@m-box.de>> wrote: >> >>> Hello Bill, >>> >>> what are your problems acually? Is fibre channel not working (as expected)? >>> >>> The log snippet you provided is completly normal and the messages >>> can safely be ignored. This is also unrelated to oVirt but rather >>> CentOS (or the distro you are running) I suppose. >>> >>> Cheers! >>> >>> On 11.09.2014 10:51, Bill Dossett wrote: >>>> Hi, >>>> >>>> I seem to have run into a problem setting up ovirt with Fibre Channel storage. >>>> >>>> I have a 2MBs SAN and qlogic cards in the nodes. I used this same >>>> setup with RHEV about 6 months ago and it just worked, storage was >>>> there no problems. Now booting with ovirtnode distro, I am seeing >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: >>>> Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. >>>> >>>> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: >>>> QLogic QLE2460 >>>> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. >>>> >>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: >>>> ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). >>>> >>>> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A >>>> -> GSI 16 (level, low) -> IRQ 16 >>>> >>>> I have googled the firmware error and it says some cards need a >>>> firmware flash and some don't. These are pretty standard HBAs so I >>>> would think they would be supported out of the box, but maybe not. >>>> Looking at trying to add the firmware looked kind of complex - if I >>>> need to do this, does anyone know of a nice and easy howto guide on >>>> this. I'm just getting started with ovirt and appreciate any help >>>> >>>> >>>> Thanks >>>> >>>> *Bill Dossett* >>>> >>>> *Virtualisation Architect* >>>> >>>> *Pitney Bowes - Tech Central*** >>>> >>>> 6 Hercules Way, 600 Leavesden Park >>>> >>>> Watford, WD25 7GS >>>> >>>> Phone(+44) (0)1923 279353 | VOIP: 54739353 >>>> >>>> Mobile(+44) (0)7775 908612 >>>> >>>> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> >>>> <mailto:bill.dossett@pb.com> >>>> >>>> www.pb.com <http://www.pb.com> <http://www.pb.com/> >>>> >>>> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE >>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid >>>> ent/newIncident.aspx>]takes >>>> >>>> less than a minute* >>>> >>>> *ManageIQ User Guide available*[*HERE >>>> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB >>>> %20v4.pdf>*] >>>> >>>> *Check out the ManageIQ Blog for recent enhancements and >>>> information [HERE] >>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.asp >>>> x>* >>>> >>>> >>>> ------------------------------------------------------------------- >>>> ------------- >>>> >>> >>> -- >>> Daniel Helgenberger >>> m box bewegtbild GmbH >>> >>> P: +49/30/2408781-22 >>> F: +49/30/2408781-10 >>> >>> ACKERSTR. 19 >>> D-10115 BERLIN >>> >>> >>> www.m-box.de <http://www.m-box.de> www.monkeymen.tv >>> <http://www.monkeymen.tv> >>> >>> Geschäftsführer: Martin Retschitzegger / Michaela Göllner >>> Handeslregister: Amtsgericht Charlottenburg / HRB 112767 >>> >> >> >> ---------------------------------------------------------------------- >> ---------- >> > > -- > Daniel Helgenberger > m box bewegtbild GmbH > > P: +49/30/2408781-22 > F: +49/30/2408781-10 > > ACKERSTR. 19 > D-10115 BERLIN > > > www.m-box.de www.monkeymen.tv > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > Handeslregister: Amtsgericht Charlottenburg / HRB 112767 > ________________________________

1 0

Re: [ovirt-users] FC QLogic question
by Daniel Helgenberger 11 Sep '14

11 Sep '14

On 11.09.2014 12:17, Bill Dossett wrote: > Thanks for responding Daniel. Never mind! > I was wondering and thought the message may be > irrelevant. But yes, it doesn’t appear to be working. When I try to add a FC > storage domain, no hosts are showing in the drop down box of hosts. I have > loaded the latests ovirtnode (3.4.something…) on two hosts now and neither are > working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. > Also having a lot of issues with configuring the network. I configure > an interface I can ping it, but it shows as unconfigured… on one host I have > added it to the manager and I see the interfaces anyway, but on the second host > I configure the eth0, I can ping it, it added to the ovirt engine but it shows > no NICs. Should I be using an earlier version maybe? > > thanks again and best regards. > > > *Bill Dossett* > *Virtualisation Architect* > *Pitney Bowes – Tech Central*** > 6 Hercules Way, 600 Leavesden Park > Watford, WD25 7GS > Phone(+44) (0)1923 279353 | VOIP: 54739353 > Mobile(+44) (0)7775 908612 > bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> > www.pb.com <http://www.pb.com/> > *In Engineering?**Raise a ticket via Remedy Anywhere [HERE > <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIn…>]takes > less than a minute* > > *ManageIQ User Guide available* [*HERE > <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf>*] > *Check out the ManageIQ Blog for recent enhancements and information [HERE] > <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* > > On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger <daniel.helgenberger(a)m-box.de > <mailto:daniel.helgenberger@m-box.de>> wrote: > > > Hello Bill, > > > > what are your problems acually? Is fibre channel not working (as expected)? > > > > The log snippet you provided is completly normal and the messages can > > safely be ignored. This is also unrelated to oVirt but rather CentOS (or > > the distro you are running) I suppose. > > > > Cheers! > > > > On 11.09.2014 10:51, Bill Dossett wrote: > >> Hi, > >> > >> I seem to have run into a problem setting up ovirt with Fibre Channel storage. > >> > >> I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with > >> RHEV about 6 months ago and it just worked, storage was there no problems. Now > >> booting with ovirtnode distro, I am seeing > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware images > >> can be retrieved from: http://ldriver.qlogic.com/firmware/. > >> > >> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic QLE2460 > >> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: PCIe > >> (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). > >> > >> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 > >> (level, low) -> IRQ 16 > >> > >> I have googled the firmware error and it says some cards need a firmware flash > >> and some don’t. These are pretty standard HBAs so I would think they would be > >> supported out of the box, but maybe not. Looking at trying to add the firmware > >> looked kind of complex – if I need to do this, does anyone know of a nice and > >> easy howto guide on this. I’m just getting started with ovirt and appreciate > >> any help > >> > >> > >> Thanks > >> > >> *Bill Dossett* > >> > >> *Virtualisation Architect* > >> > >> *Pitney Bowes – Tech Central*** > >> > >> 6 Hercules Way, 600 Leavesden Park > >> > >> Watford, WD25 7GS > >> > >> Phone(+44) (0)1923 279353 | VOIP: 54739353 > >> > >> Mobile(+44) (0)7775 908612 > >> > >> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> <mailto:bill.dossett@pb.com> > >> > >> www.pb.com <http://www.pb.com> <http://www.pb.com/> > >> > >> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE > >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIn…>]takes > >> > >> less than a minute* > >> > >> *ManageIQ User Guide available*[*HERE > >> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf>*] > >> > >> *Check out the ManageIQ Blog for recent enhancements and information [HERE] > >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* > >> > >> > >> -------------------------------------------------------------------------------- > >> > > > > -- > > Daniel Helgenberger > > m box bewegtbild GmbH > > > > P: +49/30/2408781-22 > > F: +49/30/2408781-10 > > > > ACKERSTR. 19 > > D-10115 BERLIN > > > > > > www.m-box.de <http://www.m-box.de> www.monkeymen.tv <http://www.monkeymen.tv> > > > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > > Handeslregister: Amtsgericht Charlottenburg / HRB 112767 > > > > > -------------------------------------------------------------------------------- > -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767

1 0

ovirt35 - deep dive - Monitoring (UI plugin) Dashboard (Integrated with Nagios monitoring)
by Barak Azulay 11 Sep '14

11 Sep '14

------=_Part_47532590_883835344.1410432188554 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: ovirt35 - deep dive - Monitoring (UI plugin) Dashboard (Integrated with Nagios monitoring) Organizer: "Barak Azulay" <bazulay(a)redhat.com> Time: Monday, September 15, 2014, 4:00:00 PM - 5:00:00 PM GMT +02:00 Jerusalem Invitees: anbabu(a)redhat.com; sabose(a)redhat.com; users(a)ovirt.org; devel(a)ovirt.org *~*~*~*~*~*~*~*~*~* Nagios has been integrated with ovirt-engine for monitoring the gluster deployments to enable the administrators, to monitor the health of their deployments. The administrator can use the auto-config script to be able to automatically configure nagios for monitoring their gluster deployment(hosts,volumes). The ui-plugin manifests itself in the form of two tabs : 1. Dashboard -- overall view of the deployment(Not in 3.5. Part of our plan for future release) 2. Trends -- Graphs displayed in accordance with the selected entity on the system tree when the tab is open. In this session we will go through the overall integration architecture,auto-config script and the monitoring ui-plugin. Google hangout link: https://plus.google.com/events/ccf2tev5tg5eh7ntelph95psuis Wiki Link : http://www.ovirt.org/Features/Nagios_Integration ------=_Part_47532590_883835344.1410432188554 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T020000 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=-1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T020000 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:3c61508e-b7bd-439a-b0e5-a0149bfa974d SUMMARY:ovirt35 - deep dive - Monitoring (UI plugin) Dashboard (Integrated w ith Nagios monitoring) ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:anbabu@ redhat.com ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:sabose@ redhat.com ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:devel@o virt.org ORGANIZER;CN=Barak Azulay:mailto:bazulay@redhat.com DTSTART;TZID="Asia/Jerusalem":20140915T160000 DTEND;TZID="Asia/Jerusalem":20140915T170000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20140911T104308Z DTSTAMP:20140911T104308Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: ovirt35 - de ep dive - Monitoring (UI plugin) Dashboard (Integrated with Nagios monitorin g) \nOrganizer: "Barak Azulay" <bazulay(a)redhat.com> \n\nTime: Monday\, Septe mber 15\, 2014\, 4:00:00 PM - 5:00:00 PM GMT +02:00 Jerusalem\n \nInvitees: anbabu(a)redhat.com\; sabose(a)redhat.com\; users(a)ovirt.org\; devel(a)ovirt.org \n \n\n*~*~*~*~*~*~*~*~*~*\n\nNagios has been integrated with ovirt-engine for monitoring the gluster deployments to enable the administrators\, \nto monit or the health of their deployments. The administrator can use the auto-confi g script to be able to automatically \nconfigure nagios for monitoring their gluster deployment(hosts\,volumes). \nThe ui-plugin manifests itself in the form of two tabs : \n1. Dashboard -- overall view of the deployment(Not in 3.5. Part of our plan for future release) \n2. Trends -- Graphs displayed in accordance with the selected entity on the system tree when the tab is open . \nIn this session we will go through the overall integration architecture\ ,auto-config script and the monitoring ui-plugin. \n\nGoogle hangout link: h ttps://plus.google.com/events/ccf2tev5tg5eh7ntelph95psuis \nWiki Link : http ://www.ovirt.org/Features/Nagios_Integration BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_47532590_883835344.1410432188554--

1 0

Free Memory In Hosts
by Mohyedeen Nazzal 11 Sep '14

11 Sep '14

Hi All, I have noticed that there is a huge difference between memory reading obtained from top or free commands, and values displayed on ovirt engine. "Host " Example: Engine Version : *ovirt-engine-3.4.3-1.el6.noarch* *OS: Centos 6.5_x86_64* *Used Memory:* *from free:* [root@oVirt ~]# free total used free shared buffers cached Mem: 65890412 65609864 280548 0 305408 53759412 from Egnine Webpage: only 12G is being used. Is there an explanation for this ? Please note this is the same on all previous version, the values matches only after restart of the host then free memory start to vanish by time ! Thanks, Mohyedeen.

3 2

adding machine to openldap + kerberos with a keytab
by William Law 11 Sep '14

11 Sep '14

Hi, When I try to use engine-manage-domains it seems to expect an account to sign in with. Is there any way to use a key tab? It seems like it does all this under the surface eventually; I'd just like to do it up front. Even a pointer to "manual" adding instructions would be very helpful. Thanks, Will

4 8

OS template | Errno 101] Network unreachable
by Punit Dambiwal 11 Sep '14

11 Sep '14

Hi, I have created one OS template...and now when i use this template to create the VM...the cloud-init network doesn't set in the VM....and from the VM console i can see the following error :- url_helper.py [WARNING] Calling ' http://169.254.169.254/2009-04-04/meta-data/instance-id' failed: url error [[Errno 101] Network unreachable] Thanks, Punit

1 0