- Users - oVirt List Archives

Gluster Hyperconverged fails with single disk partitioned
by Shantur Rathore 21 Jan '21

21 Jan '21

Hi, I am trying to setup a single host Self-Hosted hyperconverged setup with GlusterFS. I have a custom partitioning where I provide 100G for oVirt and its partitions and rest 800G to a physical partition (/dev/sda4). When I try to create gluster deployment with the wizard, it fails TASK [gluster.infra/roles/backend_setup : Create volume groups] **************** failed: [ovirt-macpro-16.lab.ced.bskyb.com] (item={'key': 'gluster_vg_sda4', 'value': [{'vgname': 'gluster_vg_sda4', 'pvname': '/dev/sda4'}]}) => {"ansible_loop_var": "item", "changed": false, "err": " Device /dev/sda4 excluded by a filter.\n", "item": {"key": "gluster_vg_sda4", "value": [{"pvname": "/dev/sda4", "vgname": "gluster_vg_sda4"}]}, "msg": "Creating physical volume '/dev/sda4' failed", "rc": 5} I checked and /etc/lvm/lvm.conf filter doesn't allow /dev/sda4. It only allows PV for onn VG. Once I manually allow /dev/sda4 to lvm filter, it works fine and gluster deployment completes. Fdisk : # fdisk -l /dev/sda Disk /dev/sda: 931.9 GiB, 1000555581440 bytes, 1954210120 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: FE209000-85B5-489A-8A86-4CF0C91B2E7D Device Start End Sectors Size Type /dev/sda1 2048 1230847 1228800 600M EFI System /dev/sda2 1230848 3327999 2097152 1G Linux filesystem /dev/sda3 3328000 213043199 209715200 100G Linux LVM /dev/sda4 213043200 1954209791 1741166592 830.3G Linux filesystem LVS # lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert home onn Vwi-aotz-- 10.00g pool0 0.11 ovirt-node-ng-4.4.4-0.20201221.0 onn Vwi---tz-k 10.00g pool0 root ovirt-node-ng-4.4.4-0.20201221.0+1 onn Vwi-aotz-- 10.00g pool0 ovirt-node-ng-4.4.4-0.20201221.0 25.26 pool0 onn twi-aotz-- 95.89g 2.95 14.39 root onn Vri---tz-k 10.00g pool0 swap onn -wi-ao---- 4.00g tmp onn Vwi-aotz-- 10.00g pool0 0.12 var onn Vwi-aotz-- 20.00g pool0 0.92 var_crash onn Vwi-aotz-- 10.00g pool0 0.11 var_log onn Vwi-aotz-- 10.00g pool0 0.13 var_log_audit onn Vwi-aotz-- 4.00g pool0 0.27 # grep filter /etc/lvm/lvm.conf filter = ["a|^/dev/disk/by-id/lvm-pv-uuid-QrvErF-eaS9-PxbI-wCBV-3OxJ-V600-NG7raZ$|", "r|.*|"] Am I doing something which oVirt isn't expecting? Is there anyway to provide tell gluster deployment to add it to lvm config. Thanks, Shantur

2 3

Change of IP's
by Román Larumbe S. 20 Jan '21

20 Jan '21

Hello, I have a Dell VRTX with 2 M640 servers, we installed oVirt version 4.3.10.4-1.el7, we have 1 cluster, 2 hosts and 2 storage domains. I need to change ALL the network environment solution, that is, from IP's 192.168.11.XX to 172.16.10.XX. Can anybody help me? Thank you. Román Larumbe S. Facebook: Serahp LS

2 1

VMware Fence Agent
by Robert Tongue 20 Jan '21

20 Jan '21

Greetings all, I am new to oVirt, and have a proof of concept setup with a 3-node oVirt cluster nested inside of VMware VCenter to learn it, so then I can efficiently migrate that back out to the physical nodes to replace VCenter. I have gotten all the way to a working cluster setup, with the exception of fencing. I used engine-config to pull in the vmware_soap fence agent, and enabled all the options, however there is one small thing I cannot figure out. The connection uses a self-signed certificate on the vcenter side, and I cannot figure out the proper combination of engine-config -s commands to get the script to be called with the "ssl-insecure" option, which does contain a value. It just needs the option passed. Is there anyone out there in the ether that can help me out? I can provide any information you request. Thanks in advance. The fence agent script is called with the following syntax in my tests, and returned the proper status: [root@cluster2-vm ~]# /usr/sbin/fence_vmware_soap -o status -a vcenter.address --username="administrator(a)vsphere.local" --password="0bfusc@t3d" --ssl-insecure -n cluster1-vm Status: ON -phunyguy

1 0

Why cannot create new volume ?
by tommy 20 Jan '21

20 Jan '21

3 7

Mutually exclusive VMs
by Shantur Rathore 20 Jan '21

20 Jan '21

Hi all, I am trying to figure if there is a way to force oVirt to schedule VMs on different hosts. So if I am cloning 6 VMs from a template, I want oVirt to schedule them on all different hosts. No 2 VMs must schedule on the same host. I know that there is pin-to-host functionality but I don't want to manually pin it to hosts. Thanks Shantur

2 1

Unable to edit DNS connfiguration on hosts
by miguel.garcia＠toshibagcs.com 20 Jan '21

20 Jan '21

I had to replace the DNS server in my network so I want to update the DNS address on each host so in oVirt web interface I go to Compute > Host > Hostname > Network Interfaces > Setup Host Networks Right there I click on the edit button of the vlan for networking, check out (host ip address is static), DNS configuration, check DNS configuration, Type DNS ip address and click ok to save change. I got message: Error while executing action HostSetupNetworks: Unexpected Exception. Into engile.log found message "Operation not permitted" related to this action despite that was executed with my user account (wint admin privileges) and same message was returned using admin@internal user. 2021-01-20 11:35:31,579-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] START, HostSetupNetworksVDSCommand(HostName = hyp10.eboss, HostSetupNetworksVdsCommandParameters:{hostId='39c05625-7b59-4a38-a5a9-5d556ae1fe18', vds='Host[hyp10.eboss,39c05625-7b59-4a38-a5a9-5d556ae1fe18]', rollbackOnFailure='true', commitOnSuccess='true', connectivityTimeout='120', networks='[HostNetwork:{defaultRoute='true', bonding='false', networkName='tgcs182vlan', vdsmName='tgcs182vlan', nicName='eno1', vlan='null', vmNetwork='true', stp='false', properties='[]', ipv4BootProtocol='STATIC_IP', ipv4Address='10.89.182.10', ipv4Netmask='255.255.255.0', ipv4Gateway='10.89.182.1', ipv6BootProtocol='AUTOCONF', ipv6Address='null', ipv6Prefix='null', ipv6Gateway='null', nameServers='[NameServer:{address='10.89.182.204'}, NameServer:{address='10.89.176.71'}]'}]', removedNetworks='[]', bonds='[]', removedBonds='[]', clusterSw itchType='OVS', managementNetworkChanged='false'}), log id: 23059843 2021-01-20 11:35:31,582-05 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] FINISH, HostSetupNetworksVDSCommand, return: , log id: 23059843 2021-01-20 11:35:35,665-05 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'}] 2021-01-20 11:35:35,665-05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Failed in 'HostSetupNetworksVDS' method 2021-01-20 11:35:35,666-05 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'}] 2021-01-20 11:35:35,673-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM hyp10.eboss command HostSetupNetworksVDS failed: Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'} 2021-01-20 11:35:35,673-05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Error: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'}, code = -32603 2021-01-20 11:35:35,673-05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Command 'HostSetupNetworksVDSCommand(HostName = hyp10.eboss, HostSetupNetworksVdsCommandParameters:{hostId='39c05625-7b59-4a38-a5a9-5d556ae1fe18', vds='Host[hyp10.eboss,39c05625-7b59-4a38-a5a9-5d556ae1fe18]', rollbackOnFailure='true', commitOnSuccess='true', connectivityTimeout='120', networks='[HostNetwork:{defaultRoute='true', bonding='false', networkName='tgcs182vlan', vdsmName='tgcs182vlan', nicName='eno1', vlan='null', vmNetwork='true', stp='false', properties='[]', ipv4BootProtocol='STATIC_IP', ipv4Address='10.89.182.10', ipv4Netmask='255.255.255.0', ipv4Gateway='10.89.182.1', ipv6BootProtocol='AUTOCONF', ipv6Address='null', ipv6Prefix='null', ipv6Gateway='null', nameServers='[NameServer:{address='10.89.182.204'}, NameServer:{address='10.89.176.71'}]'}]', removedNetworks='[]', bonds='[]', removedBonds='[]', cluster SwitchType='OVS', managementNetworkChanged='false'})' execution failed: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'}, code = -32603 2021-01-20 11:35:35,673-05 INFO [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Host setup networks finished. Lock released. Monitoring can run now for host 'hyp10.eboss' from data-center 'tgcs-gdl-dc1-public' 2021-01-20 11:35:35,673-05 ERROR [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Command 'org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to HostSetupNetworksVDS, error = Internal JSON-RPC error: {'reason': '[Errno 1] Operation not permitted'}, code = -32603 (Failed with error unexpected and code 16) 2021-01-20 11:35:35,677-05 INFO [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (default task-482931) [b9a19834-3f15-42da-af2c-55e292dfedea] Lock freed to object 'EngineLock:{exclusiveLocks='[HOST_NETWORK39c05625-7b59-4a38-a5a9-5d556ae1fe18=HOST_NETWORK]', sharedLocks=''}' This error message happens even in master as in nodes hosts. Any idea how can I solve it? Thanks in advance

1 0

About Enroll Certificate
by tommy 20 Jan '21

20 Jan '21

Hi, What function of the Enroll Certificate ??

2 2

Problems Installing host on brand new 4.4 cluster
by David Johnson 19 Jan '21

19 Jan '21

Hi all, I am standing up a brand new cluster on new hardware. The ovirt controller is installed and appears to be running fine. When I attempt to add the new host, I get the flag that says "Non Operational", and the exclamation mark with the message "Host has no default route". I have confirmed that I have bidirectional ssh connections between the controller and the new host. Selinux is disabled. Firewall is disabled. I can get to the host console via the link in the GUI Compute|Hosts page. This looks like a common symptom of a host of problems, but there is nothing to readily indicate what the actual problem is. In the ovirt-engine log, I found this entry: "Host 'ovirt-host-03' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt'" This seems self-explanatory, but I see no way to add the missing network to the host. Thank you in advance for your help Regards, David Johnson * <http://www.linkedin.com/in/pojoguy>*

2 2

Install of RHV 4.4 failing - "Host is not up, please check logs, perhaps also on the engine machine"
by james.freeman＠a24.io 19 Jan '21

19 Jan '21

Hi all I am in the process of migrating a RHV 4.3 setup to RHV 4.4 and struggling with the setup. I am installing on RHEL 8.3, using settings backed up from the RHV 4.3 install (via 'hosted-engine --deploy --restore-from-file=backup.bck'). The install process always fails at the same point for me at the moment, and I can't figure out how to get past it. As far as install progress goes, the local hosted-engine comes up and runs on the node. I have been able to grep for local_vm_ip in the logs, and can SSH into it with the password I set during the setup phase. However the install playbooks always fail with: 2021-01-18 18:38:00,086-0500 ERROR otopi.plugins.gr_he_common.core.misc misc._terminate:167 Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Earlier in the logs, I note the following: 2021-01-18 18:34:51,258-0500 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 fatal: [localhost]: FAILED! => {"changed": false, "msg": "Host is not up, please check logs, perhaps also on the engine machine"} 2021-01-18 18:37:16,661-0500 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-ansiblesetup/core/misc.py", line 435, in _closeup raise RuntimeError(_('Failed executing ansible-playbook')) RuntimeError: Failed executing ansible-playbook 2021-01-18 18:37:18,996-0500 ERROR otopi.context context._executeMethod:154 Failed to execute stage 'Closing up': Failed executing ansible-playbook 2021-01-18 18:37:32,421-0500 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 fatal: [localhost]: UNREACHABLE! => {"changed": false, "msg": "Failed to connect to the host via ssh: ssh: connect to host rhvm.example.org port 22: No route to host", "skip_reason": "Host localhost is unreachable", "unreachable": true} I find the unreachable message a bit odd, as at this stage all that has happened is that the local hosted-engine has been brought up to be configured, and so it is running on virbr0, not on my actual network. As a result, that DNS address will never resolve, and the IP it resolves to won't be up. I gave the installation script permission to modify the local /etc/hosts but this hasn't improved things. I presume I'm missing something in the install process, or earlier on in the logs, but I've been scanning for errors and possible clues to no avail. Any and all help greatly appreciated!

3 5

VM Disks order
by Erez Zarum 19 Jan '21

19 Jan '21

When attaching a disk it is not possible to set the disk order nor modify the order later. Example: A new VM is provisioned with 5 disks, Disk0 is the OS and then later attached disks by order up to Disk4. Removing Disk3 and then later attaching does not promise it will be attached back as Disk3. In most other platforms it is possible to set the order. Am i missing something? if not, is there a plan to add this feature?

2 1