- Users - oVirt List Archives

Re: Attempting to detach a storage domain
by Benny Zlotnik 25 Apr '21

25 Apr '21

What do the logs say? This usually means that not all hosts were able to disconnect from it On Sun, Apr 25, 2021 at 9:45 AM Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> wrote: > > Ovirt: 4.3.10 > > Storage: iSCSI > > > > Problem: Attempting to place storage domain into ‘maintenance’ in preparation for detachment and destruction, has left it hung in a ‘Preparation for maintenance’ state. > > > > I have three storage domain I need to put into maintenance, detach and delete. When I placed place the first, and smallest (100GB) into maintenance mode, it switched to ‘Preparing for Maintenance’, and has stuck there for hours. > > > > Early on, I was able to re-activate it, but I do want to remove for use somewhere else, and I want make sure I can remove it, before I try to do the same with two 11TB storage domains. > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HY3LWX7HMN56S…

2 1

Attempting to detach a storage domain
by Matthew.Stier＠fujitsu.com 25 Apr '21

25 Apr '21

Ovirt: 4.3.10 Storage: iSCSI Problem: Attempting to place storage domain into 'maintenance' in preparation for detachment and destruction, has left it hung in a 'Preparation for maintenance' state. I have three storage domain I need to put into maintenance, detach and delete. When I placed place the first, and smallest (100GB) into maintenance mode, it switched to 'Preparing for Maintenance', and has stuck there for hours. Early on, I was able to re-activate it, but I do want to remove for use somewhere else, and I want make sure I can remove it, before I try to do the same with two 11TB storage domains.

1 0

Can we remove Export and ISO Domain from KVM ?.
by smuthyala＠helenoftroy.com 23 Apr '21

23 Apr '21

I need to migrate both Export and ISO Domains to newer storage. Can i remove them and recreate. Or is there a way to export and import into a newer storage. TIA

1 0

ovsdb-server tlsv1 unknown ca
by ozmen62＠hotmail.com 23 Apr '21

23 Apr '21

1 0

Re: Ansible ovirt.ovirt_vm nics
by Martin Perina 22 Apr '21

22 Apr '21

Hi Matthew, Could you please share with us your playbook? Which ansible version are you using? Are you using ovirt_vm module from oVirt Ansible Collection which contains newer versions than the ovirt_vm module included in Ansible 2.9? https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_vm_mo… Thanks, Martin On Thu, Apr 22, 2021 at 9:28 AM Matthew.Stier(a)fujitsu.com < Matthew.Stier(a)fujitsu.com> wrote: > The ‘nics’ section of ovirt_vm is vague and with nearly no examples. > > > > My playbook is based upon > https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-ma… > > > > I’ve made several modifications, (more default) and added a few lines, > which I believe is supposed to assign vnic profiles to the primary vnic > (nic1), based upon the definition of ‘vm_nic1_profile’ defined in an > included ‘ini’ file. (the profile defaulting to blank if it is not defined > in the ini file.) > > > > It isn’t doing its job. > > > > nics: > > - name: “nic1” > > profile_name: "{{ hostvars[item]['vm_nic1_profile'] | default('') }}” > > > > > > The playbook runs without complaint. If I run it with option ‘-vvv’ part > of the output lists the variables, but the ‘nics’ variable is an empty list > (nics[]) > > > > Any hints on what I’m doing wrong? I’ve checked the forum, but it tends > to strip leading spaces, which is bad for indent sensitive code. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MEZLXGSSRCRJR… > -- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o.

2 1

n00b Requesting Some Advice
by matthew＠peregrineit.net 22 Apr '21

22 Apr '21

Hi All, I need some "best practice" advice. We have a Ceph Storage Cluster (Octopus moving to Pacific) which we'd like to use with our new oVirt Cluster (all on CentOS 8 boxes). What I'd like to know is what is the "best" (ie recommended / best practice) way of doing this - via iSCSI, CFS, 'raw' RBD blocks, some other way I haven't read about yet, etc? I realise 'best' is a subjective term, but what I tend to do is do 'manual' installs so that I both actually understand what is happening (ie how things fit together - I pull apart and rebuild mechanical clocks and watches for the same reason) and also so I can '"Puppet-ise" the results for future use. This means that I am *not* necessarily looking for "quick and dirty" or "quick and easy" (ie, I have no trouble using the CLI and 'vim-ing' conf files as required) but I do want a solid, "best-practice" system when I'm done. So, can some please help? And also, would you mind pointing me towards the relevant documentation for the answer(s) supplied (yes, I *always* RTFM :-) ). Thanks in advance Dulux-Oz

6 6

not able to upload disks, iso - Connection to ovirt-imageio service has failed. Ensure that ovirt-engine certificate is registered as a valid CA in the browser.
by dhanaraj.ramesh＠yahoo.com 22 Apr '21

22 Apr '21

Hi We are unning with 4.4.3.12-1.el8 version and so far working fine, but today users complained they are unable to upload new disks and upon checking found "Connection to ovirt-imageio service has failed. Ensure that ovirt-engine certificate is registered as a valid CA in the browser" during testing option. please help on this and if there is any temp solution is available share me the steps

4 7

How to update ovirt-sdk
by Miguel Garcia 22 Apr '21

22 Apr '21

We integrate jenkins to launch vms dynamically to run smoketest from our builds but now we receive the following problem: "msg": "ovirtsdk4 version 4.3.0 or higher is required for this module" I had installed following packages in CentOs7 ovirt-engine-sdk-java.noarch 3.6.10.0-1.el7 epel ovirt-engine-sdk-java-javadoc.noarch 3.6.10.0-1.el7 epel ovirt-engine-sdk-python.noarch 3.6.9.1-1.el7 epel I tired to use yum upgrade but did not report more recent version from ovirt-sdk. How can I upgrade/install ovirt-sdk to version 4.3?

4 8

[ANN] oVirt 4.4.6 Fifth Release Candidate is now available for testing
by Lev Veyde 22 Apr '21

22 Apr '21

oVirt 4.4.6 Fifth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.6 Fifth Release Candidate for testing, as of April 22nd, 2021. This update is the sixth in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA or later should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.6 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.6 (redeploy in case of already being on 4.4.6). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.3 or newer * CentOS Linux (or similar) 8.3 or newer * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.3 or newer * CentOS Linux (or similar) 8.3 or newer * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.6 release highlights: http://www.ovirt.org/release/4.4.6/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.6/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

host certification is about to expire
by Bill James 22 Apr '21

22 Apr '21

I get this message from ovirt: Message:Host <hostname> certification is about to expire at 2021-05-12. Please renew the host's certification. I tried putting host in maintenance mode and running "enroll certificate". Didn't help. How do I renew the certificate? I'm running* 4.3.9.4-1.el7* *Thanks.* -- This email, its contents and attachments contain information from J2 Global, Inc. and/or its affiliates which may be privileged, confidential or otherwise protected from disclosure. The information is intended to be for the addressee(s) only. If you are not an addressee, any disclosure, copy, distribution or use of the contents of this message is prohibited. If you have received this email in error, please notify the sender by reply email and delete the original message and any copies.

2 4

Ansible ovirt.ovirt_vm nics
by Matthew.Stier＠fujitsu.com 22 Apr '21

22 Apr '21

The 'nics' section of ovirt_vm is vague and with nearly no examples. My playbook is based upon https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-ma… I've made several modifications, (more default) and added a few lines, which I believe is supposed to assign vnic profiles to the primary vnic (nic1), based upon the definition of 'vm_nic1_profile' defined in an included 'ini' file. (the profile defaulting to blank if it is not defined in the ini file.) It isn't doing its job. nics: - name: "nic1" profile_name: "{{ hostvars[item]['vm_nic1_profile'] | default('') }}" The playbook runs without complaint. If I run it with option '-vvv' part of the output lists the variables, but the 'nics' variable is an empty list (nics[]) Any hints on what I'm doing wrong? I've checked the forum, but it tends to strip leading spaces, which is bad for indent sensitive code.

1 0

Re: How to Upgrade Node with Local Storage ?
by Adam Xu 22 Apr '21

22 Apr '21

在 2021/4/21 22:40, Nur Imam Febrianto 写道: > > Set global maintenance and then turn off all vm, do yum update but it > completed with failed. > > Am I missing something ? > where is your ovirt engine ? is it running in that local storage or in a standalone server? > > *From: *Adam Xu <mailto:adam_xu@adagene.com.cn> > *Sent: *20 April 2021 7:36 > *To: *users(a)ovirt.org <mailto:users@ovirt.org> > *Subject: *[ovirt-users] Re: How to Upgrade Node with Local Storage ? > > For oVirt Node that using Local Storage, I think you should shutdown > all your vms before you upgrade the Node. > > 在 2021/4/19 22:09, Nur Imam Febrianto 写道: > > Hi, > > How we can upgrade oVirt Node that using Local Storage ? Seems I > cant find any good documentation about this. > > Planning to upgrade one 4.4.4 node with local storage to 4.4.5. > > Thanks before. > > Regards, > > Nur Imam Febrianto > > > > _______________________________________________ > > Users mailing list --users(a)ovirt.org <mailto:users@ovirt.org> > > To unsubscribe send an email tousers-leave(a)ovirt.org <mailto:users-leave@ovirt.org> > > Privacy Statement:https://www.ovirt.org/privacy-policy.html <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir…> > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir…> > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZOCH… <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ov…> > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZIWFVG73Y5CBS…

1 0

Moving templates and their thin based VMs
by Gianluca Cecchi 21 Apr '21

21 Apr '21

Hello, I had to free up and reformat a storage domain where I had some templates and many VMs. I was able to move to other existing storage domains disks of VMs created with "Clone" Storage Allocation But some of these VMs had disk with storage allocation of type "Thin" on their related template. So I was both unable to move these templates and VMs disks... I was able to export as OVA the templates and then import again them (with another name "_Copy") on to another storage domain.... then remove VMs and templates and rename templates' names... Are there any chances to better solve these kind of problems if one has to decommission a storage domain? Only export of all VMs and related templates? Is there a way to "consolidate" the disks of an existing "Thin" based storage allocation to Clone? Possibly I can clone the VM? Thanks in advance, Gianluca

2 3

Re: FreeBSD 13 and virtio
by thomas＠hoberg.net 21 Apr '21

21 Apr '21

I am attaching both working configs here. Von: Nur Imam Febrianto <nur_imam(a)outlook.com> Gesendet: Dienstag, 20. April 2021 14:14 An: Thomas Hoberg <thomas(a)hoberg.net>; users(a)ovirt.org Betreff: [ovirt-users] Re: FreeBSD 13 and virtio Seems strange. I want to use q35, but whenever I try even to start the installation (vm disk using virtio-scsi/virtio, net adapter using virtio) it always shows me the installer doesn't detect any disk. I have an existing VM too that recently upgraded from 12.2 to 13. It uses i440FX with virtio-scsi disk and virtio network. If I try to change the machine into q35, it keeps stuck at boot after "promiscuous mode enabled". Don't know what's wrong. Using oVirt 4.4.5. Can you share your VM Config ? From: Thomas Hoberg <mailto:thomas@hoberg.net> Sent: 20 April 2021 17:27 To: users(a)ovirt.org <mailto:users@ovirt.org> Subject: [ovirt-users] Re: FreeBSD 13 and virtio q35 with BIOS as that is the cluster default with >4.3. Running the dmesg messages through my mind as I remember them, the vio hardware may be all PCIe based, which would explain why this won't work on a virtual FX 440FX system, because those didn't have PCIe support AFAIK. Any special reason why you'd want them based on 440FX? And I also tested with GhostBSD, which is still 12.* based, and that doesn't seem to have vio support, at least I could not see a hard disk there, which confirms your observation there. _______________________________________________ Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt .org%2Fprivacy-policy.html <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir t.org%2Fprivacy-policy.html&data=04%7C01%7C%7C71e5972978224d31def708d903 e6f09b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637545112683975628%7CUnk nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXV CI6Mn0%3D%7C1000&sdata=effZxEik3q1lfTBn%2BBi4DXIQM6wVJfgiQ7%2Fqr0W1dLM%3 D&reserved=0> &data=04%7C01%7C%7C71e5972978224d31def708d903e6f09b%7C84df9e7fe9f640afb4 35aaaaaaaaaaaa%7C1%7C0%7C637545112683975628%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata= effZxEik3q1lfTBn%2BBi4DXIQM6wVJfgiQ7%2Fqr0W1dLM%3D&reserved=0 oVirt Code of Conduct: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt .org%2Fcommunity%2Fabout%2Fcommunity-guidelines%2F <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir t.org%2Fcommunity%2Fabout%2Fcommunity-guidelines%2F&data=04%7C01%7C%7C71 e5972978224d31def708d903e6f09b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C 637545112683975628%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luM zIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=rvQ12IpSElU9D23G7HJvPz%2F vqqZ0OaUhJ3wI%2BRslIQY%3D&reserved=0> &data=04%7C01%7C%7C71e5972978224d31def708d903e6f09b%7C84df9e7fe9f640afb4 35aaaaaaaaaaaa%7C1%7C0%7C637545112683975628%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata= rvQ12IpSElU9D23G7HJvPz%2FvqqZ0OaUhJ3wI%2BRslIQY%3D&reserved=0 List Archives: https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi rt.org%2Farchives%2Flist%2Fusers%40ovirt.org%2Fmessage%2F7ZWDRPXM6G25H4VRE3O UAH25UIY4JVI3%2F <https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ov irt.org%2Farchives%2Flist%2Fusers%40ovirt.org%2Fmessage%2F7ZWDRPXM6G25H4VRE3 OUAH25UIY4JVI3%2F&data=04%7C01%7C%7C71e5972978224d31def708d903e6f09b%7C8 4df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637545112683975628%7CUnknown%7CTWF pbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D% 7C1000&sdata=qDf%2BRNi1PXI2cf%2F4XFc6qHCTY6lqOX9lE5Qvyhg4Xls%3D&rese rved=0> &data=04%7C01%7C%7C71e5972978224d31def708d903e6f09b%7C84df9e7fe9f640afb4 35aaaaaaaaaaaa%7C1%7C0%7C637545112683975628%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata= qDf%2BRNi1PXI2cf%2F4XFc6qHCTY6lqOX9lE5Qvyhg4Xls%3D&reserved=0

2 1

Re: How to Upgrade Node with Local Storage ?
by Adam Xu 21 Apr '21

21 Apr '21

For oVirt Node that using Local Storage, I think you should shutdown all your vms before you upgrade the Node. 在 2021/4/19 22:09, Nur Imam Febrianto 写道: > > Hi, > > How we can upgrade oVirt Node that using Local Storage ? Seems I cant > find any good documentation about this. > > Planning to upgrade one 4.4.4 node with local storage to 4.4.5. > > Thanks before. > > Regards, > > Nur Imam Febrianto > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZOCHCAJPXO4LT…

2 1

oVirt Node's Future Regarding CentOS Stream
by eshwayri＠gmail.com 21 Apr '21

21 Apr '21

So I just finished migrating my 4.3 engine to 4.4 on a brand new RHvEL8 install; next step is to upgrade the hosts. When I first started with oVirt I used my own CentOS installs, but quickly decided that it made no sense for my use case. Now I am looking at upgrading from 4.3 to 4.4 and asking myself the same question. Up to now oVirt node has been using the same exact OS I would have used +/- a few extra packages, but with the traditional CentOS going away it really depends on what the new oVirt nodes are going to be based on. I have a feeling the answer to that question is CentOS Stream, which I don't feel comfortable with for this task. While I am sure the developers will test the combination before releasing a new node, they are still only testing whatever specific hardware combination they have. There could be numerous weird bugs that will only show up in certain situations. If Stream was as stable as an EL release, there wouldn't be EL releases. I also appreciate the fa ct that oVirt is itself a work in progress, but the stable branch is considerably more like an EL release than a stream. Anyway, back to the point. Just want to confirm the future for node is stream before I go wasting time building my own EL8 hosts.

3 3

Re: FreeBSD 13 and virtio
by Thomas Hoberg 20 Apr '21

20 Apr '21

q35 with BIOS as that is the cluster default with >4.3. Running the dmesg messages through my mind as I remember them, the vio hardware may be all PCIe based, which would explain why this won't work on a virtual FX 440FX system, because those didn't have PCIe support AFAIK. Any special reason why you'd want them based on 440FX? And I also tested with GhostBSD, which is still 12.* based, and that doesn't seem to have vio support, at least I could not see a hard disk there, which confirms your observation there.

2 3

Re: FreeBSD 13 and virtio
by Sandro Bonazzola 20 Apr '21

20 Apr '21

Maybe you can have a look at https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=236922 "Bug 236922 - Virtio fails as QEMU-KVM guest with Q35 chipset on Ubuntu 18.04.2 LTS" it's from ~20 days ago and the bug is still open Il giorno mar 20 apr 2021 alle ore 14:16 Nur Imam Febrianto < nur_imam(a)outlook.com> ha scritto: > Seems strange. I want to use q35, but whenever I try even to start the > installation (vm disk using virtio-scsi/virtio, net adapter using virtio) > it always shows me the installer doesn’t detect any disk. I have an > existing VM too that recently upgraded from 12.2 to 13. It uses i440FX with > virtio-scsi disk and virtio network. If I try to change the machine into > q35, it keeps stuck at boot after “promiscuous mode enabled”. > > Don’t know what’s wrong. Using oVirt 4.4.5. Can you share your VM Config ? > > > > *From: *Thomas Hoberg <thomas(a)hoberg.net> > *Sent: *20 April 2021 17:27 > *To: *users(a)ovirt.org > *Subject: *[ovirt-users] Re: FreeBSD 13 and virtio > > > > q35 with BIOS as that is the cluster default with >4.3. > > Running the dmesg messages through my mind as I remember them, the vio > hardware may be all PCIe based, which would explain why this won't work on > a virtual FX 440FX system, because those didn't have PCIe support AFAIK. > > Any special reason why you'd want them based on 440FX? > > And I also tested with GhostBSD, which is still 12.* based, and that > doesn't seem to have vio support, at least I could not see a hard disk > there, which confirms your observation there. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: > https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir… > oVirt Code of Conduct: > https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovir… > List Archives: > https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ov… > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/KFTCXCLC6Q5LV… > -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

oVirt Node
by KSNull Zero 20 Apr '21

20 Apr '21

Hello! We want to switch OS based oVirt instalation to oVirt-Node based. Is it safe to have OS based hosts and oVirt-Node hosts in the same cluster (with FC shared storage) during transition ? Thank you.

2 1

rhv-log-collector-analyzer available missing?
by Juhani Rautiainen 20 Apr '21

20 Apr '21

Hi! I'm trying to upgrade SHE from 4.3->4.4. Instructions from https://www.ovirt.org/documentation/upgrade_guide/#SHE_Upgrading_from_4-3 has step "4.2 Analyzing the Environment". My installation doesn't bring the tool rhv-log-collector-analyzer although wiki has a notice that it has been available since v4.2.5? [root@ovirtmgr ~]# yum install rhv-log-collector-analyzer Loaded plugins: fastestmirror, versionlock Determining fastest mirrors ovirt-4.3-epel/x86_64/metalink | 34 kB 00:00:00 * base: mirror.hosthink.net * extras: mirror.hosthink.net * ovirt-4.3: resources.ovirt.org * ovirt-4.3-epel: mirrors.nxthost.com * updates: mirror.hosthink.net base | 3.6 kB 00:00:00 centos-sclo-rh-release | 3.0 kB 00:00:00 extras | 2.9 kB 00:00:00 ovirt-4.3 | 3.0 kB 00:00:00 ovirt-4.3-centos-gluster6 | 3.0 kB 00:00:00 ovirt-4.3-centos-opstools | 2.9 kB 00:00:00 ovirt-4.3-centos-ovirt-common | 3.0 kB 00:00:00 ovirt-4.3-centos-ovirt43 | 2.9 kB 00:00:00 ovirt-4.3-centos-qemu-ev | 3.0 kB 00:00:00 ovirt-4.3-epel | 4.7 kB 00:00:00 ovirt-4.3-virtio-win-latest | 3.0 kB 00:00:00 sac-gluster-ansible | 3.3 kB 00:00:00 updates | 2.9 kB 00:00:00 (1/9): extras/7/x86_64/primary_db | 232 kB 00:00:00 (2/9): ovirt-4.3-centos-gluster6/x86_64/primary_db | 120 kB 00:00:00 (3/9): ovirt-4.3-epel/x86_64/group_gz | 96 kB 00:00:00 (4/9): base/7/x86_64/primary_db | 6.1 MB 00:00:00 (5/9): ovirt-4.3-epel/x86_64/updateinfo | 1.0 MB 00:00:00 (6/9): ovirt-4.3-epel/x86_64/primary_db | 6.9 MB 00:00:00 (7/9): centos-sclo-rh-release/x86_64/primary_db | 2.9 MB 00:00:00 (8/9): sac-gluster-ansible/x86_64/primary_db | 12 kB 00:00:00 (9/9): updates/7/x86_64/primary_db | 7.1 MB 00:00:00 No package rhv-log-collector-analyzer available. Error: Nothing to do Are we missing a repo or is this just copy/paste error from RHV docs and this step shouldn't even be in the oVirt docs? Thanks, Juhani -- Juhani Rautiainen jrauti(a)iki.fi

3 3

Re: FreeBSD 13 and virtio
by Thomas Hoberg 20 Apr '21

20 Apr '21

I've just given it a try: works just fine with me. But I did notice, that I chose virtio-scsi when I created the disk, don't now if that makes any difference, but as an old-timer, I still got "SCSI" ingrained as "better than ATA". Chose FreeBSD 9.2 x64 as OS type while creating the VM (nothing closer appears in the selection box), again don't know if there are better choices. iperf3 shows slightly lower performance than a typical Linux guest, still rather close to 10Gbit/s on my network from the FreeBSD13 guest to a host "next-door", around 40Gbit/s VM to host. Verfied usage of vtnet0/VirtIO NIC and vtscsi0/VirtIO SCSI via dmesg.

2 1

Is it possible to upgrade 3 node HCI from 4.3 to 4.4?
by Jayme 20 Apr '21

20 Apr '21

I have a fairly stock three node HCI setup running oVirt 4.3.9. The hosts are oVirt node. I'm using GlusterFS storage for the self hosted engine and for some VMs. I also have some other VMs running from an external NFS storage domain. Is it possible for me to upgrade this environment to 4.4 while keeping some of the VMs on GlusterFS storage domains running? Does the upgrade require an additional physical host? I'm reading through the upgrade guide and it's not very clear to me how the engine is reinstalled on CentOS8. Do you need a 4th host, or do you take one of the three existing hosts down, wipe it and install ovirt node 4.4? Would it be easier for me to just move all VMs to my NFS storage domain, wipe all hosts and deploy a brand new 4.4 HCI cluster then import the NFS storage domain? Will the 4.3 VMs on the NFS storage domain import/run properly into the new 4.4 deployment or are there any other considerations?

3 4

intel_iommu=on kvm-intel.nested=1 deactivates rp_filter kernel option
by Nathanaël Blanchet 20 Apr '21

20 Apr '21

Hello, I have two kind of hosts: * some with default ovirt node 4.4 kernel settings * some with custom kernel settings including intel_iommu=on kvm-intel.nested=1 I can't open vm console from the second category host when binding from a different vlan because the host is unreacheable But if I set sysctl -w net.ipv4.conf.all.rp_filter=2, I can bind the host and open a vm console. I didn't test if this behaviour is because of Hostdev Passthrough & SR-IOV or Nested Virtualization. Is it an expected behaviour or a bug? -- Nathanaël Blanchet Supervision réseau SIRE 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 1

Two selfhosted engines
by wilrikvdvliert＠hotmail.com 20 Apr '21

20 Apr '21

Dear forum, If I understand correctly, I need shared storage for the self-hosted engine to make it highly available. But is it possible to create 2 self-hosted engines on 2 hosts and make it high available this way? Kind regard

3 2

ova import
by eevans＠digitaldatatechs.com 20 Apr '21

20 Apr '21

I am running Ovirt 4.3 and exported machines as ova which includes disks. When I re import them. the disks are thin provisioned and the vm will not boot. Any idea how to get the import to preallocate disks? I have vms that will not boot. It states no bootable disk is available. It seems the virt2vm isn't working correctly. ANy help would be appreciated. Eric

4 5