- Users - oVirt List Archives

Re: [ovirt-devel] Host's status how to change to UP when I execute Management--> Active command
by Liran Rotenberg 05 Nov '20

05 Nov '20

Hi, The engine will monitor that host. Once it's reachable and we can get information from it the status will change accordingly. Please check out the HostMonitoring class. On Thu, Nov 5, 2020 at 11:57 AM lifuqiong(a)sunyainfo.com < lifuqiong(a)sunyainfo.com> wrote: > > Hi, > I checkout ovirt-engine's code with branch 4.2; When execute Host's > Management --> Active command, ovirt engine just set vds's status to > "Unassigned" but how the vds's status changed to "UP" in ovirt-engine? The > code in ActiveVdsCommand.executeCommand() as follows: > protected void executeCommand() { > > final VDS vds = getVds(); > try (EngineLock monitoringLock = acquireMonitorLock("Activate > host")) { > executionHandler.updateSpecificActionJobCompleted(vds.getId(), > ActionType.MaintenanceVds, false); > > setSucceeded(setVdsStatus(VDSStatus.Unassigned).getSucceeded()); > > if (getSucceeded()) { > TransactionSupport.executeInNewTransaction(() -> { > // set network to operational / non-operational > List<Network> networks = > networkDao.getAllForCluster(vds.getClusterId()); > networkClusterHelper.setStatus(vds.getClusterId(), > networks); > return null; > }); > > // Start glusterd service on the node, which would haven > been stopped due to maintenance > if (vds.getClusterSupportsGlusterService()) { > runVdsCommand(VDSCommandType.ManageGlusterService, > new GlusterServiceVDSParameters(vds.getId(), > Arrays.asList("glusterd"), "restart")); > // starting vdo service > GlusterStatus isRunning = > glusterUtil.isVDORunning(vds.getId()); > switch (isRunning) { > case DOWN: > log.info("VDO service is down in host : '{}' with > id '{}', starting VDO service", > vds.getHostName(), > vds.getId()); > startVDOService(vds); > break; > case UP: > log.info("VDO service is up in host : '{}' with > id '{}', skipping starting of VDO service", > vds.getHostName(), > vds.getId()); > break; > case UNKNOWN: > log.info("VDO service is not installed host : > '{}' with id '{}', ignoring to start VDO service", > vds.getHostName(), > vds.getId()); > break; > } > > } > } > } > } > > > Your Sincerely > Mark Lee > _______________________________________________ > Devel mailing list -- devel(a)ovirt.org > To unsubscribe send an email to devel-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/36745S77NLH3K… >

1 0

Affinity Group Graceful Migration
by thilburn＠generalpacific.com 05 Nov '20

05 Nov '20

Hello, I'm trying to get an Affinity Group setup that will gracefully remove VMs from a Host. Below is what I've tried but the VMs will not migrate off. oVirt 4.3 Priority: 1 VM Affinity Rule: Disabled Host Affinity Rule: Negative ( Soft ) Virtual Machines: Select a VM ( My understanding is this would mean all VMs? ) Hosts: Host: <Name of host> Also, is this right place to ask for help on this?

2 1

Coffee Lake CPU
by jb 05 Nov '20

05 Nov '20

Hello, sorry there comes many questions today from me! I plan a new cluster setup, and for that I bought ASUS Barebone with Intel Xeon E-2246G CPUs. Sadly I pay not enough attention to the system requirements from oVirt and now I say that theCoffee Lake-ER architecture is not in the supported CPU list from oVirt. Is there any downsides with using a Coffee Lake CPU? Jonathan

1 0

locked disk making it impossible to remove vm
by igor.lustosa＠hybriddc.com.br 05 Nov '20

05 Nov '20

I have a vm that has two disks one active and another disabling when trying to migrate the disk to another storage the task was in a loop creating several snapshots, I turned off the VM and the loop stopped and after several hours the task disappeared and the VM disk was left blocking making it impossible to be deleted and when trying to delete the vm it does not exclude from the following message locked disk making it impossible to remove vm How can I solve this?

2 3

VM Struck in Shutdown Mode
by Andrei Verovski 05 Nov '20

05 Nov '20

Hi, I have oVirt 4.4 engine and v4.2 nodes. On one node newly created VM struck in shutdown mode (with green round recycle icon) - I can’t anything, neither power off neither shutdown, both operation fail (with no explanation). This VM have no value whatsoever, but I can’t delete it either. Restarted oVirt engine, all same. Process list (on node) clearly shows absence of this VM as KVM process. VM is down. How to reset its status in oVirt? Thanks in advance. Andrei

2 3

enabling BaseOS repo in oVirt Node 4.4
by jb 05 Nov '20

05 Nov '20

Hello everybody, is it a problem to enable the BaseOS on a oVirt Node? I ask, because I would like to install nano 😁... I could just disable it again, after installation, but what can happen when it stays enabled? Jonathan

1 0

Host's status how to change to UP when I execute Management--> Active command
by lifuqiong＠sunyainfo.com 05 Nov '20

05 Nov '20

Hi, I checkout ovirt-engine's code with branch 4.2; When execute Host's Management --> Active command, ovirt engine just set vds's status to "Unassigned" but how the vds's status changed to "UP" in ovirt-engine? The code in ActiveVdsCommand.executeCommand() as follows: protected void executeCommand() { final VDS vds = getVds(); try (EngineLock monitoringLock = acquireMonitorLock("Activate host")) { executionHandler.updateSpecificActionJobCompleted(vds.getId(), ActionType.MaintenanceVds, false); setSucceeded(setVdsStatus(VDSStatus.Unassigned).getSucceeded()); if (getSucceeded()) { TransactionSupport.executeInNewTransaction(() -> { // set network to operational / non-operational List<Network> networks = networkDao.getAllForCluster(vds.getClusterId()); networkClusterHelper.setStatus(vds.getClusterId(), networks); return null; }); // Start glusterd service on the node, which would haven been stopped due to maintenance if (vds.getClusterSupportsGlusterService()) { runVdsCommand(VDSCommandType.ManageGlusterService, new GlusterServiceVDSParameters(vds.getId(), Arrays.asList("glusterd"), "restart")); // starting vdo service GlusterStatus isRunning = glusterUtil.isVDORunning(vds.getId()); switch (isRunning) { case DOWN: log.info("VDO service is down in host : '{}' with id '{}', starting VDO service", vds.getHostName(), vds.getId()); startVDOService(vds); break; case UP: log.info("VDO service is up in host : '{}' with id '{}', skipping starting of VDO service", vds.getHostName(), vds.getId()); break; case UNKNOWN: log.info("VDO service is not installed host : '{}' with id '{}', ignoring to start VDO service", vds.getHostName(), vds.getId()); break; } } } } } Your Sincerely Mark Lee

1 0

20+ Fresh Installs Failing in 20+ days [newbie & frustrated]
by info＠worldhostess.com 05 Nov '20

05 Nov '20

I have no idea if it is Hardware or Software. It crashed every time after it starts with the storage setup Error in ovirt-hosted-engine-setup-ansilble-setup-final_clean [FAILED] DESTROYED LOCAL STORAGE-POOL HTTPS --- "certificate invalid" The system is very unstable and impossible to do anything remotely ONLY accessible on local terminal. This is my hardware SuperMicro X11SSF-M Intel Xeon E3-1230 16 GB ECC RAM 2 x 1 TB Micron 1300 SSD Key Features X11SSM-F specifications Single socket H4 (LGA 1151) supports IntelR XeonR processor E3-1200 v6/v5, IntelR 7th/6th Gen. CoreT i3 series, IntelR CeleronR and IntelR PentiumR IntelR C236 chipset Up to 64GB Unbuffered ECC UDIMM DDR4 2400MHz; 4 DIMM slots Expansion slots: 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, 2 PCI-E 3.0 x4 (in x8) Dual GbE LAN with IntelR i210-AT 8 SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10 I/O: 1 VGA, 2 COM, 2 SuperDOM, and TPM header 5 USB 3.0 (2 rear, 2 via header(s), 1 Type A), 6 USB 2.0 (2 rear, 4 via header(s)) Integrated IPMI 2.0 and KVM with Dedicated LAN Yours Sincerely, Henni

6 38

lose my server ovirt-engine in network
by garcialiang.anne＠gmail.com 05 Nov '20

05 Nov '20

Hello, I installed my ovirt-engine during 1 month. I can connect with ssh or website. Yesterday, I rebooted my server ovirt-engine. But I can't connect it with ssh. My server lost in network. I can login with the machine, but I can't ping with network. Is there the problem with network setting ? Could you help me, please? Thanks, Anne Garcia

1 0

Removal of dpdk
by Ales Musil 04 Nov '20

04 Nov '20

Hello, we have decided to remove dpdk in the upcoming version of oVirt namely 4.4.4. Let us know if there are any concerns about this. Thank you. Regards, Ales Musil -- Ales Musil Software Engineer - RHV Network Red Hat EMEA <https://www.redhat.com> amusil(a)redhat.com IM: amusil <https://red.ht/sig>

4 6

Requesting for a help in resolving ovirt self hosted engine installation issue
by Jadavalluvar Sethuraman, Hariharan 04 Nov '20

04 Nov '20

Hello, Good Day! I'm Hariharan and I'm working as System Administrator in Linux platform for RWTH Uniklink - Germany. Currently I'm managing the Ovirt environment and I'm very new to this domain. Currently I'm facing an issue with Ovirt self hosted engine installation 4.4 in CentOS 8 server. I have an issue when mounting the glusterfs storage to a target machine. Below is the exact issue what I face; Error: "changed": false, "msg": "Error: the target storage domain contains only 22.0GiB of available space while a minimum of 61.0GiB is required If you wish to use the current target storage domain by extending it, make sure it contains nothing before adding it. Note: (gluster storage was installed and configured in Linux work station with adding additional hard disk in one of the two gluster storage linux work station. I used replicated volumes (replica 2) in creating gluster volumes) Hardware detail: device model: Dell R540 Capacity: 240 GB I tried best possibilities to resolve this issue but still I'm facing the same issue. Could you please help me in resolving this issue with your guidance or support. Hariharan Jadavalluvar Sethuraman Systemadministrator der Brain Imaging Facility (BIF) des interdisziplinären Zentrums für klinische Forschung (IZKF) Universitätsklinikum Aachen (AöR) Pauwelsstraße 30 52074 Aachen Tel: +49 241 80-89150 E-Mail: hjadavalluva(a)ukaachen.de<mailto:rrodriguez@ukaachen.de> ________________________________

1 0

Ovirt 4.4 ilo_ssh version HP ILO3. ERROR: Unable to connect/login to fencing device
by melnyksergii＠gmail.com 04 Nov '20

04 Nov '20

Dears, I have a 3 nodes with HP blade servers G7 and ILO3. ILO3 with the latest firmware 1.93 from Aug 07 2020. I'm try to migrate from Ovirt 4.3 to 4.4 with Centos 8, but I had a problem with setup ssh ilo fence on this nodes. In Ovirt 4.3 with Centos 7 all is works. When I try to Test fence, I see ERROR: Unable to connect/login to fencing device. When I try to use /usr/sbin/fence_ilo_ssh I see the same error. So, I know where is a problem. The problem in an old ssh security keys HostKeyAlgorithms=+ssh-dss. When I add to /root/.ssh/config some exclude for use HostKeyAlgorithms=+ssh-dss I can connect to ilo over ssh from root with: /usr/sbin/fence_ilo_ssh -a 10.0.11.157 -l user -p passwordh -x -u 22 --login-timeout=10 -o status and see: Status: ON But when I try again setup ilo_ssh fence in Ovirt-engine UI I still have the same ERROR: Unable to connect/login to fencing device. How can I solve this problem in Ovirt? Thanks

1 1

HCI with 5 node quest
by simon＠justconnect.ie 03 Nov '20

03 Nov '20

I have a 3 node HCI setup with 2 Replica 3 volumes using nodes 1, 2 & 3 and have added 2 additional Compute nodes to this Cluster. What is stopping me from adding nodes 4 & 5 as Gluster Peers and creating a glusterfs Replica 3 Volume using nodes 3, 4 & 5? Shimme

3 4

ovirt glusterfs
by garcialiang.anne＠gmail.com 03 Nov '20

03 Nov '20

Hello, I've some problem with Hyperconverged Configure Gluster storage and oVirt hosted engine. I've the message error: failed: [node2.xxxxx.fr] (item={u'key': u'gluster_vg_sdb', u'value': [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}]}) => {"ansible_loop_var": "item", "changed": false, "err": " Device /dev/sdb excluded by a filter.\n", "item": {"key": "gluster_vg_sdb", "value": [{"pvname": "/dev/sdb", "vgname": "gluster_vg_sdb"}]}, "msg": "Creating physical volume '/dev/sdb' failed", "rc": 5} Could you help me for know where is the problem, please? Thanks, Anne Garcia

4 3

POWER9 (ppc64le) Support on oVirt 4.4.1
by Vinícius Ferrão 03 Nov '20

03 Nov '20

Hello, I was using oVirt 4.3.10 with IBM AC922 (POWER9 / ppc64le) without any issues. Since I’ve moved to 4.4.1 I can’t add the AC922 machine to the engine anymore, it complains with the following error: The host CPU does not match the Cluster CPU type and is running in degraded mode. It is missing the following CPU flags: model_POWER9, powernv. Any ideia of what’s may be happening? The engine runs on x86_64, and I was using this way on 4.3.10. Machine info: timebase : 512000000 platform : PowerNV model : 8335-GTH machine : PowerNV 8335-GTH firmware : OPAL MMU : Radix Thanks,

3 18

Re: Migrate hosted-engine to new storage domain
by Yedidyah Bar David 03 Nov '20

03 Nov '20

On Tue, Nov 3, 2020 at 7:07 AM Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> wrote: > > I’ve migrated my iSCSI storage to a new array, and the only thing remaining is to migrate the hosted-engine. > > > > Any directions on how I should proceed. I understand that I will need to back-up the existing, create a new hosted-engine on the new storage, specifying the backup a reference. > > > > I just would like to see a step-by-step, so I know I am doing everything, and in the right order. Generally speaking, you should follow the hosted-engine backup and restore flows/documents. I strongly suggest to test this first on a test machine before production. You can take a backup without downtime. Restore on some machine (can be a VM, with nested-kvm) that has no access to your production storage and hosts (to make sure the restored engine won't start managing them/competing with the production one). See that all looks good. Then plan production... Good luck and best regards, -- Didi

1 0

Migrate hosted-engine to new storage domain
by Matthew.Stier＠fujitsu.com 03 Nov '20

03 Nov '20

I've migrated my iSCSI storage to a new array, and the only thing remaining is to migrate the hosted-engine. Any directions on how I should proceed. I understand that I will need to back-up the existing, create a new hosted-engine on the new storage, specifying the backup a reference. I just would like to see a step-by-step, so I know I am doing everything, and in the right order.

1 0

Select host for image upload
by C Williams 02 Nov '20

02 Nov '20

Hello, I am having problems selecting the host that I want to use for .iso and other image uploads via the oVirt Web Console. I have 20+ servers of varying speeds. Somehow oVirt keeps wanting to select my oldest and slowest system to use for image uploads. Please Help ! Thank You ! C Williams

2 3

Q: Failed creating snapshot
by Andrei Verovski 02 Nov '20

02 Nov '20

Hi, I have oVirt 4.4 with nodes 4.2.8 Attempt to create snapshot failed with: EventID 10802 VDSM node11 command SnapshotVDS failed: Message timeout can be caused by communication issues. Event ID 2022 Add-disk operation failed to complete. However, snapshot is on disk since VM now takes 1200GB instead of 500. Yes snapshot list in VM details is empty. How to recover disk space occupied by unsuccessful snapshot ? I looked at /vmraid/nfs/disks/xxxx-xxxx-xxx/images and there are no distinctive files which I can identify as snapshot. Thanks in advance. Andrei

2 1

ovirt installation with proxy or katello
by Markus Schaufler 02 Nov '20

02 Nov '20

Hi, in our environment we need to either specify proxy settings or use foreman/katello repositories. I'd like to test both ways but the installer with the ansible scripts behind don't seem to use the hosts settings. Where do I have to adopt the install scripts and will there be in future a GUI option to specify those things? Can't understand why disconnected environments or environments with proxies aren't better taken into consideration...? Thanks in advance, Markus

1 0

Question about OVN MTU
by Strahil Nikolov 02 Nov '20

02 Nov '20

Hello All, I would like to learn more about OVN and especially the maximum MTU that I can use in my environment. Current Setup 4.3.10 Network was created via UI -> MTU Custom -> 8976 -> Create on External Provider -> Connect to Physical Network So my physical connection is MTU 9000 and I have read that Geneve uses 24 bits (maybe that's wrong ?) , thus I have reduced the MTU to 8976. I did some testing on the VMs and ping with payload of '8914' was the maximum I could pass without fragmenting and thus the MTU on the VMs was set to 8942. Did I correctly configure the test network's MTU and am I understanding it correctly that we need extra 34 bits inside the network for encapsulation ? I have checked https://www.ovirt.org/develop/release-management/features/network/managed_m… but I don't see any refference how to calculate the max MTU. Best Regards, Strahil Nikolov

3 8

different rendering chrome and firefox and corruptions in both
by Gianluca Cecchi 01 Nov '20

01 Nov '20

Hello, I'm using Fedora 31 with google-chrome-stable-86.0.4240.111-1.x86_64 firefox-82.0-4.fc31.x86_64 Engine was deployed from a CentOS Linux 8.2 host and then with hosted engine wizard, using the appliance rpm (Package ovirt-engine-appliance.x86_64 4.4-20200916125954.1.el8) Connecting to the same 4.4.2 engine I get: 1) different landing page graphics firefox: https://drive.google.com/file/d/142Ch7qXmmIP9sQQCS1rD75yexX64RmSu/view?usp=… chrome: https://drive.google.com/file/d/1KPvlNk65ltIBhr8GFdVm-GMtfq1Elt7J/view?usp=… 2) corruption in several editing pages in firefox, where a sort of top white part seems to compromise the lower part of the window, making impossible to complete. eg in new network I don't see the lower part related to MTU...: https://drive.google.com/file/d/18aQfDbl_9R9oQsTMwebJSiRZHETkUWIc/view?usp=… 3) in Stotrage --> volumes page if I click on a volume, firefox shows no problem, but chrome gives a gui exception: https://drive.google.com/file/d/1svzQjrGctRMQFvZEpW9zpOlUbv8XXl3Q/view?usp=… Gianluca

2 1

Discard after Delete
by Joris DEDIEU 01 Nov '20

01 Nov '20

Hi list, I forgot to check "Discard after Delete" when creating a new volume. Is there a way (other than to empty the volume) to reclaim free blocks. In https://bugzilla.redhat.com/show_bug.cgi?id=981626 I read about blkdiscard, but as far as I understand it will erase my VMs ... Thanks for your answers Joris

4 4

Training Video or document or training session
by info＠worldhostess.com 01 Nov '20

01 Nov '20

Can someone recommend a training video of some kind of step by step document to do the installation and administration for OVirt? Or if someone that wants to do a one on one online training? I would be super excited to do online training. I have been trying many time to install and I am sure I make some mistakes because I can't get OVirt to work properly. I have done numerous installations during the last few weeks. Yours Sincerely, Henni

4 3

oVirt 4.3.10 RHEL 7.9 support
by KSNull Zero 30 Oct '20

30 Oct '20

Hello! Does oVirt 4.3.10 supports RHEL 7.9 hosts ? Is it safe to update ovirt 4.3.10 hosts to the latest RHEL 7.9 ? Thank you.

4 4